Wyszukiwarka
Wyniki wyszukiwania dla: INTEGRATED TREATMENT
-
Procedure based functional safety and information security management of industrial automation and control systems on example of the oil port installations
PublikacjaThe approach addresses selected technical and organization aspects of risk mitigation in the oil port installations with regard to functional safety and security requirements specified in standards IEC 61508, IEC 61511 and IEC 62443. The procedure for functional safety management includes the hazard identification, risk analysis and assessment, specification of overall safety requirements and definition of...
-
The Use of Gravimetric Measurements to Determine the Orthometric Height of the Benchmark in the Port of Gdynia
PublikacjaThis paper contains a description of the technology used to make gravimetric measurements of the height of a reference point located in the Port of Gdynia, Poland. Measurements were made using a CG-5 gravimeter manufactured by LaCoste & Romberg Scintrex Inc., and determinations of position used a Leica Viva GS15 receiver integrated with a network of HxGN SmartNet GNSS reference stations. The measuring methodology required gravimeter...
-
A Linear Phase Filter in Quadruplet Topology With Frequency-Dependent Couplings
PublikacjaThis letter presents a design of a linear phase microwave bandpass filter. The filter is composed of four resonators arranged in the quadruplet topology. Making the cross and one direct coupling dispersive gives additional design flexibility. The first advantage of using frequency-dependent couplings is the possibility to chose an arbitrary location of a pair of complex transmission zeros (TZs) in the s-domain. The second one is...
-
State of Development of Intelligent Transport Systems Services on National Roads in Poland
PublikacjaIn recent years we can see intensifying implementation of Intelligent Transport System (ITS) measures in Polish cities and on national roads. The architecture of the National Traffic Management System (KSZR) will enable the implementation of a uniform, integrated and intelligent ICT system to launch ITS systems that are the most important for drivers and the General Directorate for National Roads and Motorways (GDDKiA). This paper...
-
Maszyny elektryczne wokół nas. Poszukiwanie dróg do nauczania na kierunku Elektrotechnika Politechniki Gdańskiej = Electrical machines around us. searching for teaching ways at electrical engineering of the Gdansk University of Technology
PublikacjaStreszczenie angielskie: This paper provides a summary of the didactic assumptions, goals and approach concerning the syllabus and description/modelling of electrical machines (EM) for teaching in the field of power electrical engineering at the Gdansk University of Technology. They have been used to write e-text book entitled "Electrical machines around us" that covered the lectures on electrical machines given for the second...
-
Atomic Force Microscope data post-processing algorithm for higher harmonics imaging
PublikacjaPrevious works have proved that higher harmonics topography imaging using atomic force microscope (AFM) can significantly enhanced its measurement capabilities. Integrated tools dedicated to most of microscopes allow to visualize the investigated surface only by one selected harmonic. Because of the different characteristics of a sample, scanning tip and the environment, appropriate harmonic selection is time consuming and requires...
-
Design of a Distributed System using Mobile Devices and Workflow Management for Measurement and Control of a Smart Home and Health
PublikacjaThe paper presents design of a distributed system for measurements and control of a smart home including temper- atures, light, fire danger, health problems of inhabitants such as increased body temperature, a person falling etc. This is done by integration of mobile devices and standards, distributed service based middleware BeesyCluster and a workflow management system. Mobile devices are used to measure the parameters and are...
-
Instalacje PV zintegrowane z budynkiem
PublikacjaBIPV (ang. Building Integrated Photovoltaics) - architektoniczne, strukturalne i estetyczne systemy fotowoltaicznezintegrowane z budynkami - to jedna z najbardziej obiecujących form wykorzystania energii odnawialnej,pozwalająca na połączenie systemu generującego energie elektryczna z obiektami takimi jak domy mieszkalne,szkoły i biurowce. Obecnie instalacje takie powstają na całym świecie, głównie w prestiżowych projektach, takichjak...
-
Perspectives of Telematics Implementation in Tri-City Transport Systems Management and Planning
PublikacjaIn 2010 the City of Gdynia applied for match funding the project ''Implementation of the Integrated Traffic Management System TRISTAR in Tri-City" under the Operational Programme Infrastructure and Environment. This year the project has been placed on a list approved by the Ministry of Infrastructure. Tri-City proceeds with a tender for the implementation of the system. The project will be implemented in key elements are included...
-
Survey on Applications of Multimedia Technology to Examine Impact of Roadside Advertising on Drivers
PublikacjaThe correct location of ads, both static and moving, in close proximity of the roadway is an issue of high significance in the context of road safety. This publication aims to provide support in solving these issues by presenting a range of options for the implementation of extensive, multi-faceted research, using modern technology to allow an objective assessment of the risks arising from the presence of advertising spots in the...
-
Knowledge-based functional safety and security management in hazardous industrial plants with emphasis on human factors
PublikacjaExisting and emerging new hazards have significant potential to impact destructively operation of technical systems, hazardous plants, and systems / networks of critical infrastructure. The programmable control and protection systems play nowadays an important role in reducing and controlling risk in the process of hazardous plant operation. It is outlined how to deal with security related hazards concerning such systems to be...
-
ADAPTIVE PREDICTIONS OF THE EURO/ZŁOTY CURRENCY EXCHANGE RATE USING STATE SPACE WAVELET NETWORKS AND FORECAST COMBINATIONS
PublikacjaThe paper considers the forecasting of the euro/Polish złoty (EUR/PLN) spot exchange rate by applying state space wavelet network and econometric forecast combination models. Both prediction methods are applied to produce one-trading-day- ahead forecasts of the EUR/PLN exchange rate. The paper presents the general state space wavelet network and forecast combination models as well as their underlying principles. The state space...
-
Risk Diagnosis and Management with BBN for Civil Engineering Projects during Construction and Operation
PublikacjaThe authors demonstrate how expert knowledge about the construction and operation phases combined with monitoring data can be utilized for the diagnosis and management of risks typical to large civil engineering projects. The methodology chosen for estimating the probabilities of risk elements is known as Bayesian Belief Networks (BBN). Using a BBN model one can keep on updating the risk event probabilities as the new evidence...
-
CHALK & TALK OR SWIPE & SKYPE?
PublikacjaTechnology in classroom is a matter of heated discussions in the field of education development, especially when multidisciplinary education goes along with language skills. Engineers’ education requires theoretical and practical knowledge. Moreover, dedicated computer skills become crucial for both young graduates and experienced educators on the labor market. Teaching online with or without using different Learning Management...
-
Microsphere structure application for supercapacitor in situ temperature monitoring
PublikacjaConstant, real-time temperature monitoring of the supercapacitors for efficient energy usage is in high demand and seems to be crucial for further development of those elements. A fiber-optic sensor can be an effective optoelectronic device dedicated for in-situ temperature monitoring of supercapacitors. In this work, the application of the fiber-optic microstrucutre with thin zinc oxide (ZnO) coating fabricated in the atomic layer...
-
Miniaturized Dual-Band SIW-Based Bandpass Filters Using Open-Loop Ring Resonators
PublikacjaThis article presents two novel architectures of dual-band substrate integrated waveguide (SIW) bandpass filters (BPFs). Initially, two identical open-loop ring resonators (OLRRs) are coupled face-to-face on the top of the SIW cavity to realize a dual-band single-pole BPF. To obtain two-pole dual-band characteristics, two OLRRs resonant units are assembled horizontally within the top metal layer of the SIW, which is a technique...
-
In-ADC, Rank-Order Filter for Digital Pixel Sensors
PublikacjaThis paper presents a new implementation of the rank-order filter, which is established on a parallel-operated array of single-slope (SS) analog-to-digital converters (ADCs). The SS ADCs use an “on-the-ramp processing” technique, i.e., filtration is performed along with analog-to-digital conversion, so the final states of the converters represent a filtered image. A proof-of-concept 64 × 64 array of SS ADCs, integrated with MOS...
-
Virtual immersive environments
PublikacjaYet a higher level of active systems may be achieved when users are fully immersed in an interface which is a 3D computer generated virtual world and can interact with surrounding objects of that world as they were in a real one. This is the issue covered by Chapter 7. Interaction in such a world is both multidimensional and multimodal, with the possibility of free movement of the user in any direction and the simultaneous stimulation...
-
Toolchain Modeling: Comprehensive Engineering Plans for Industry 4.0
PublikacjaThe fourth industrial revolution (Industry 4.0) elevates the complexity and autonomy of industrial systems and engineering environments to levels not seen before. The novel challenges involve not only the software running on the partaking autonomous devices, but also architectural considerations and the technological infrastructure around the entire engineering process. In this paper, complementing the trends in industrial systems...
-
Intra-subject class-incremental deep learning approach for EEG-based imagined speech recognition
PublikacjaBrain–computer interfaces (BCIs) aim to decode brain signals and transform them into commands for device operation. The present study aimed to decode the brain activity during imagined speech. The BCI must identify imagined words within a given vocabulary and thus perform the requested action. A possible scenario when using this approach is the gradual addition of new words to the vocabulary using incremental learning methods....
-
Algorytm kontroli jakości z elementami sterowania rozmytego dla elastycznie zautomatyzowanego wytwarzania.
PublikacjaPublikacja dotyczy struktury procesu produkcyjnego w środowisku komputerowo zintegrowanego wytwarzania (computer integrated manufacturing - CIM). Ukazuje ona aspekty kontroli jakości wykonania części na różnych etapach procesu wytwórczego, podkreślając jego istotność. W celu dokonania szczegółowej analizy problemu zebrano dane o jakości wykonania części na poszczególnych poziomach wytwarzania. Analizy dowiodły, że jakość wykonania...
-
Molywood: streamlining the design and rendering of molecular movies
PublikacjaMotivation High-quality dynamic visuals are needed at all levels of science communication, from the conference hall to the classroom. As scientific journals embrace new article formats, many key concepts – particularly in structural biology – are also more easily conveyed as videos than still frames. Notwithstanding, the design and rendering of a complex molecular movie remain an arduous task. Here, we introduce Molywood, a robust...
-
Centrifuge modelling of tapered wall jacked into dense sand
PublikacjaA series of static penetration tests of trapezoidal walls in dense Fontainebleau sand were performed in the geotechnical centrifuge at Gustave Eiffel University. The models of wall with three different shapes (straight profile with thickness D=16mm, 0.75 degree and 1.5 degree of taper angle) but with the same volume were used. The soil mass was instrumented with five stress cells located at two levels at 2D, 4D and 6D distance...
-
SiC-based T-type modules for multi-pulse inverter with coupled inductors
PublikacjaThe paper presents SiC-based three-level T-type modules designed for a high-performance 30kVA DC/AC inverter operating at high frequency 85 kHz with low THD of the output voltage. This inverter system consists of two integrated parts. The first part is active and contains three parallelconnected three-phase T-type modules built with fast-switching SiC power transistors. The second, passive part of the system is a set of inductors...
-
2-D constitutive equations for orthotropic Cosserat type laminated shells in finite element analysis
PublikacjaWe propose 2-D Cosserat type orthotropic constitutive equations for laminated shells for the purpose of initial failure estimation in a laminate layer. We use nonlinear 6-parameter shell theory with asymmetric membrane strain measures and Cosserat kinematics as the framework. This theory is specially dedicated to the analysis of irregular shells, inter alia, with orthogonal intersections, since it takes into account the drilling...
-
Influence of passive house technology on time and cost of construction investment
PublikacjaDue to the changes in the energy standards for housing in Poland there are many concerns. Is the standard required by the regulation achievable and if it is, then at what cost? There are many solutions to construct a building in line with the requirements of passive house technology. They are differentiated by price and time required for implementation. This study is based on the solution proposed by one of Polish companies, offering...
-
Counting and tracking vehicles using acoustic vector sensors
PublikacjaA method is presented for counting vehicles and for determining their movement direction by means of acoustic vector sensor application. The assumptions of the method employing spatial distribution of sound intensity determined with the help of an integrated 3D intensity probe are discussed. The intensity probe developed by the authors was used for the experiments. The mode of operation of the algorithm is presented in conjunction...
-
Przyszłość fotowoltaiki - Instalacje fotowoltaiczne zintegrowane z budynkiem (BIPV)
PublikacjaBIPV (ang. Building Integrated Photovoltaics) architektoniczne, strukturalne i estetyczne systemy fotowoltaiczne zintegrowane z budynkami to jedna z najbardziej obiecujących form wykorzystania energii odnawialnej, pozwalająca na połączenie systemu generującego energię elektryczną z obiektami takimi jak domy mieszkalne, szkoły i biurowce. Instalacje takie powstają na całym świecie, głównie w przypadku prestiżowych projektów, takich...
-
A Perspective on Fast-SPICE Simulation Technology
PublikacjaThis chapter presents an introduction to the area of accelerated transistor-level (‘fast-SPICE’) simulation for automated verification and characterization of integrated circuits (ICs) from technologist’s perspective. It starts with outlining goals, expectations and typical usage models for fast-SPICE simulators, stressing how they differ from regular SPICE tools. It continues with presenting and classifying core technologies typically...
-
Decisional DNA Based Conceptual Framework for Smart Manufacturing
PublikacjaThis paper presents the conceptual framework for systematic knowledge representation, storage and reuse of manufacturing information in a production scenario. This knowledge structure is designed for three levels in a manufacturing set up viz. first at the engineering objects level, second at process and finally at factory level. Virtual engineering object (VEO) deals with knowledge at the individual object/component/machine level...
-
Air quality policy in the U.S. and the EU – a review
PublikacjaThe high level of atmospheric pollution is a global problem that has taken on particular significance in recent years and will continue to grow in the near future. Air pollution directly affects the health, living organisms, vegetation, water, soil and buildings. Additionally, it moves easily even over long distances. Certain air pollutants influence the climate, cause negative processes in the protective ozone layer and contribute...
-
Model of a Maturity Capsule in Managing IT Projects
PublikacjaThe main purpose of this article is to present a report on the development of a model of information technology management (MITM). This model is an answer to the need to support decision making in the selection of methods and information technologies. This article presents a multisequential model (MSM) of technology selection and a model for initial processing procedures (IPP) necessary for the MITM model. The presentation of the...
-
Towards systemic functional safety and security management in hazardous plants
PublikacjaThe aim of this article is to identify and discuss some issues related to functional safety and security management in hazardous industrial plants. The safety functions are to be realised using the electric / electronic / programmable electronic systems (E/E/PESs) or the safety instrumented systems (SISs) that are designed and operated respectively according to IEC 61508 and IEC 61511 requirements in life cycle. Although the role...
-
Changing by light - how the lighting of intelligent spaces can influence the urban image
PublikacjaIn the article light will be presented as a tool in the process of transforming the urban space. The reason for this use of light is the commercial aspect of space that forces it to be still competitive and profitable. Such a need gives rise to many innovative solutions in the city space, which allow transmitting information in order to attract human attention, and sometimes make it even possible to involve the user in the interaction...
-
Energy Modeling of Single-Family Houses in the Conceptual Phase
PublikacjaThe aim of the article is to identify the potential impact of the latest commercial digital tools for building energy analysis on the everyday architectural practice in Poland in the context of typology and energy optimization of single –family houses. The reason for this survey is that “architect friendly” interfaces simulation results’ visualization and energy analysis tools are not given deserved attention in the architectural...
-
Estimating Traffic Intensity Employing Passive Acoustic Radar and Enhanced Microwave Doppler Radar Sensor
PublikacjaInnovative road signs that can autonomously display the speed limit in cases where the trac situation requires it are under development. The autonomous road sign contains many types of sensors, of which the subject of interest in this article is the Doppler sensor that we have improved and the constructed and calibrated acoustic probe. An algorithm for performing vehicle detection and tracking, as well as vehicle speed measurement,...
-
Design and Experiments of a Piezoelectric Motor Using Three Rotating Mode Actuators
PublikacjaThis paper represents a numerical and experimental investigation of the multicell piezoelectric motor. The proposed design consists of three individual cells that are integrated into the stator, double rotor, and a preload system combined into a symmetrical structure of the motor. Each of the cells is characterized by a traveling wave and rotating mode motor. A finite element numerical analysis is carried out to obtain optimal...
-
Food Bioactive Ingredients Processing Using Membrane Distillation
PublikacjaSeparation processes are an important part of today’s food industries, especially in the case of specific bioactive components due to their health benefits. In general, processing of bioactive food ingredients assumes the introduction of integrated system directed to their separation, fractionation, and recovery. Recently, membrane distillation (MD) has been considered as an alternative membrane-based separation and concentration...
-
Fast Design Optimization of Waveguide Filters Applying Shape Deformation Techniques
PublikacjaThis paper presents an efficient design of microwave filters by means of geometry optimization using shape deformation techniques. This design procedure allows for modelling complex 3D geometries which can be fabricated by additive manufacturing (AM). Shape deforming operations are based on radial basis function (RBF) interpolation and are integrated into an electromagnetic field simulator based on the 3D finiteelement method (FEM)....
-
Airfoil Design Under Uncertainty Using Non-Intrusive Polynomial Chaos Theory and Utility Functions
PublikacjaFast and accurate airfoil design under uncertainty using non-intrusive polynomial chaos (NIPC) expansions and utility functions is proposed. The NIPC expansions provide a means to efficiently and accurately compute statistical information for a given set of input variables with associated probability distribution. Utility functions provide a way to rigorously formulate the design problem. In this work, these two methods are integrated...
-
Design Evolution of the Ultrasonic Piezoelectric Motor Using Three Rotating Mode Actuators
PublikacjaThe development process and experimental investigation of the multicell piezoelectric motor is presented in this paper. The proposed design consists of three individual cells integrated into the stator, double rotor, and a preload system. Those elements are combined into a symmetrical structure of the motor. The two new prototypes have been designed, simulated and tested. Finite element numerical analysis is carried out to obtain...
-
A Power-Efficient Digital Technique for Gain and Offset Correction in Slope ADCs
PublikacjaIn this brief, a power-efficient digital technique for gain and offset correction in slope analog-to-digital converters (ADCs) has been proposed. The technique is especially useful for imaging arrays with massively parallel image acquisition where simultaneous compensation of dark signal non-uniformity (DSNU) as well as photo-response non-uniformity (PRNU) is critical. The presented approach is based on stopping the ADC clock by...
-
Techno-economic evaluation of combined cycle gas turbine and a diabatic compressed air energy storage integration concept
PublikacjaMore and more operational flexibility is required from conventional power plants due to the increasing share of weather-dependent renewable energy sources (RES) generation in the power system. One way to increase power plant’s flexibility is integrating it with energy storage. The energy storage facility can be used to minimize ramping or shutdowns and therefore should lower overall generating costs and CO2 emissions. In this article,...
-
Improving Output Performance of the Ultrasonic Multicell Piezoelectric Motor by Development the Multi-Rotor Structure
PublikacjaIn recent years, many researches have been carried out on piezoelectric multi-rotor structures. This paper describes the analysis, development and experimental process of an ultrasonic multi-cell piezoelectric motor using a multi-rotor structure. In this design, three independent cells have been integrated into a mechatronic system. Analytical model and finite element method are used for modal and dynamic analysis of the proposed...
-
IMPLEMENTING THE QUALITY ASSURANCE SYSTEM AND ASSURING HEALTH SAFETY IN THE LIGHT OF INCREASING BREAD QUALITY
PublikacjaThe article presents rules, requirements, and norms for quality management and health safety assurance systems among small and medium bakeries. This group of businesses does not have the obligation of implementing or certifying specific systems. They are, however, implemented in order to increase the quality of the bread or reach a better market position. Also, the results of a 2022 study of 53 bakeries’ implementation of individual...
-
Dynamic Execution of Engineering Processes in Cyber-Physical Systems of Systems Toolchains
PublikacjaEngineering tools support the process of creating, operating, maintaining, and evolving systems throughout their lifecycle. Toolchains are sequences of tools that build on each others' output during this procedure. The complete chain of tools itself may not even be recognized by the humans who utilize them, people may just recognize the right tool being used at the right place in time. Modern engineering processes, however, do...
-
Systems engineering approach to functional safety and cyber security of industrial critical installations
PublikacjaThis chapter addresses the systems engineering approach to integrated functional safety and cybersecurity analysis and management regarding selected references, standards and requirements concerning critical installations and their industrial automation and control system (IACS). The objective is to mitigate the vulnerability of industrial installations that include the information technology (IT) and the operational technology...
-
Laser induced formation of copper species over TiO2 nanotubes towards enhanced water splitting performance
PublikacjaWe proposed fast and scalable route where the ordered TiO2 nanotubes coated with thin copper layers were annealed by the laser beam of 355 nm wavelength at different fluencies in the range of 15–120 mJ/cm2. As a result, copper species are integrated with the titania substrate and the formed material exhibits unique optical absorption bands in the visible range. Moreover, X-ray photoelectron spectroscopy analysis reveals the formation...
-
An Example of Using Low-Cost LiDAR Technology for 3D Modeling and Assessment of Degradation of Heritage Structures and Buildings
PublikacjaThis article examines the potential of low-cost LiDAR technology for 3D modeling and assessment of the degradation of historic buildings, using a section of the Koszalin city walls in Poland as a case study. Traditional terrestrial laser scanning (TLS) offers high accuracy but is expensive. The study assessed whether more accessible LiDAR options, such as those integrated with mobile devices such as the Apple iPad Pro, can serve...
-
Time-of-flight electron scattering from molecular hydrogen: Benchmark cross sections for excitation of the X1Σ+g→b3Σ+u transition
PublikacjaThe electron impact X1Σ+g to b3Σ+u transition in molecular hydrogen is one of the most important dissociation pathways to forming atomic hydrogen atoms, and is of great importance in modeling astrophysical and industrial plasmas where molecular hydrogen is a substantial constituent. Recently it has been found that the convergent close-coupling (CCC) cross sections of Zammit et al. [Phys. Rev. A 95, 022708 (2017)] are up to a factor...