Search
Search results for: construction materials
-
Relieving the Measuring System of the Trailer for Tyre/Road Rolling Resistance Measurements from the Inertia Force
PublicationIn the article the principle of measuring of tyre/road rolling resistance tyres in road conditions applied in a special measuring trailer is presented. This trailer was built in Faculty of Mechanical Engineering at Gdansk University of Technology. The construction of two special devices used in this trailer was discussed. These devices eliminate the influence of some chosen confounding measurements factors such as: the inertia...
-
Chemical, Physical, and Mechanical Properties of 95-Year-Old Concrete Built-In Arch Bridge
PublicationThis research aimed to determine the durability and strength of an old concrete built-in arch bridge based on selected mechanical, physical, and chemical properties of the concrete. The bridge was erected in 1925 and is located in Jagodnik (northern Poland). Cylindrical specimens were taken from the side ribs connected to the top plate using a concrete core borehole diamond drill machine. The properties of the old concrete were...
-
Clays as Inhibitors of Polyurethane Foams’ Flammability
PublicationPolyurethanes are a very important group of polymers with an extensive range of applications in different branches of industry. In the form of foams, they are mainly used in bedding, furniture, building, construction, and automotive sectors. Due to human safety reasons, these applications require an appropriate level of flame retardance, often required by various law regulations. Nevertheless, without the proper modifications,...
-
Bitumen Aging—Laboratory Simulation Methods Used in Practice and Selected Directions of Research on New Methods
PublicationChanges in the properties of bitumen binders that occur as a result of aging have a huge impact on the durability of products produced from them. In particular, asphalt pavements, which constitute the most common use of petroleum bitumen, are susceptible to damage resulting from the increasing stiffness of the bitumen during its life cycle. Increased stiffness of asphalt pavements reduces the pavement resistance to low-temperature...
-
Field Evaluation of High Modulus Asphalt Concrete Resistance to Low-Temperature Cracking
PublicationHigh-modulus asphalt concrete has numerous advantages in comparison to conventional asphalt concrete, including increased resistance to permanent deformations and increased pavement fatigue life. However, previous studies have shown that the construction of road pavements with High Modulus Asphalt Concrete (HMAC) may significantly increase the risk of low-temperature cracking. Those observations were the motivation for the research...
-
Experimental Study of the Resistance to Influence of Aggressive Liquids on Lightweight Concrete
PublicationIn light of the scientific research, the corrosion of concrete structures is one of the main problems that may reduce their durability due to the negative impact of the natural environment. The paper analyzes the influence of the type of component on the selected properties of lightweight concrete subjected to the influence of aggressive liquids. Four concrete mixes were prepared with a granular aggregate made of foamed glass (GEGA)...
-
Blast Charge Technique as a Method of Soil Improving to Locate the New Supporting Runways
PublicationA quick and effective method of reinforcing the ground base designed for the construction of engineering structures used for performing various types of air operations was presented. It allows to use wastelands, wetlands, swamps, etc. for these purposes, thus creating a dispersed network of landing sites, increasing the access of large social groups to air transport and increasing their mobility.
-
Building Information Modeling in Small and Middle Sized Buildings – Case Study
PublicationBuilding Information Modeling (BIM) is a technology designed to improve and integrate all engineering aspects in the construction design process. Tools that incorporate the idea of BIM are becoming more advanced and also more popular. Available software solutions have already reached an assumable high level of development, but still are not as widespread and used on nearly as many construction projects as could be expected. Therefore...
-
DESIGN AND CALIBRATION OF ROLLING RESISTANCE TEST TRAILER R2mk.2
PublicationThe paper describes construction nad calibration procedures of the rolling resistance test trailer R2 Mk2. The trailer is design to measure rolling resistance of passenger car tyres in various road conditions on trafficked road. The trailer utilizes so called angle method also known as vertical arm method. The paper presents also calibration procedures that are necessary to ascertain good precision of the measurements.
-
Incorporation of nitrogen in diamond films – A new way of tuning parameters for optical passive elements
PublicationThis paper investigates the impact of nitrogen incorporation in diamond films for the construction of an interferometric sensor to measure displacement. Diamond films with different nitrogen levels (0–5%) were deposited on silicon substrates by microwave plasma enhanced chemical vapor deposition. The structural characteristics of these samples are characterized using scanning electron microscopy (SEM), atomic force microscopy (AFM), confocal...
-
Changes in Functional and Spatial Layouts of Polish Single-Family Houses
PublicationArticle presents the evolution of functional and spatial layouts of single-family houses in Poland, with particular emphasis on the functions of a contemporary house. Singlefamily housing constitutes a significant part of the construction market in Poland. The way of forming functions in single-family buildings in the historical cycle has characteristic features resulting from the culture of the society in a given period. The functional...
-
Incorporation of nitrogen in diamond films - A new way of tuning parameters for optical passive elements
PublicationThis paper investigates the impact of nitrogen incorporation in diamond films for the construction of an interferometric sensor to measure displacement. Diamond films with different nitrogen levels (0–5%) were deposited on silicon substrates by microwave plasma enhanced chemical vapor deposition. The structural characteristics of these samples are characterized using scanning electron microscopy (SEM), atomic force microscopy...
-
Raman modular system with fibre-optic probes for remote monitoring of CVD process
PublicationW pracy opisano konstrukcję modułowego spektroskopu ramanowskiego umożliwiającego monitorowanie wzrostu warstw w procesach CVD. Przedstawiono rezultaty testów skostruowanego układu oraz wstępne wyniki pomiarów warstw diamentowych.
-
Stresses in the zone of process openings in the shell of a vertical cylindrical steel tank
PublicationW dolnej części płaszcza zbiornika walcowego na ciecze konieczne jest wykonanie różnego rodzaju otworów technologicznych. Artykuł poświęcony jest analizie stanu naprężeń w strefie wzmocnień wykonywanych w sąsiedztwie otworów na rurociągi oraz na włazy wyczystkowe w płaszczu zbiornika. Ponieważ charakter zmian naprężeń, a więc i wzmocnień w strefie obu rodzajów otworów jest różny dlatego artykuł podzielony jest na dwie części, z...
-
Badania i modelowanie degradacji materiałów pod wpływem oddziaływania czynników mechanicznych i korozyjnych
PublicationOpisano formy niszczenia materiałów pod łącznym działaniem czynników mechanicznych i korozyjnych. Dokonano przeglądu metod stosowanych do badań degradacji materiałów poddanych działaniu naprężeń w środowisku korozyjnym. Przedstawiono przykłady badań modelowych procesów niszczenia wodorowego, korozji naprężeniowej i zmęczenia korozyjnego.
-
Zastosowanie metody analizy obrazu w określaniu odporności kawitacyjnej materiałów
PublicationPrzedstawiono optyczną metodę określania właściwości kawitacyjnych materiału oraz charakterystyki kawitacyjnej stanowiska przy zastosowaniu komputerowej analizy obrazu erodowanej powierzchni uzyskanego w mikroskopie świetlnym.
-
Charakterystyka kawitacyjna laserowo obrabianych napoin Fe-Cr-Mn
PublicationPrzedstawiono badania odporności kawitacyjnej napoin Fe-Cr-Mn w dwóch przypadkach: bez dodatkowej obróbki powierzchniowej oraz po przetapianiu powierzchni napoiny wiązką lasera CO2 o mocy 1000W. Oceniano głębokość i stopień umocnienia warstwy wierzchniej.
-
Morfologia napawanych warstw na bazie kobaltu po utlenianiu i korozji w gazach spalinowych
PublicationPrzedmiotem badań były warstwy wytworzone z proszku na bazie kobaltu, napawane laserowo i plazmowo na przylgnie zaworów wylotowych silników Diesla. Dla wszystkich warstw stwierdzono dobrą jakość, brak pęknięć i jednorodność struktury na powierzchni. Badania degradacji wykonano w specjalnie wykonanej komorze w gazach spalinowych silnika okrętowego. Badania napoin przeprowadzono po 2 miesiącach ekspozycji w podwyższonej temperaturze...
-
Ocena ryzyka kruchego pękania wspomaganego przez wodór złączy spawanych stali okrętowej o wysokiej wytrzymałości
PublicationOceniano podatność na niszczenie wodorowe stali 14HNMBCu (S690Q) o wysokiej wytrzymałości i jej połączeń spawanych przy obciążeniu monotonicznie rosnącym oraz stałym w wodzie morskiej. Badania przeprowadzono w powietrzu, oraz w środowisku wody morskiej przy potencjale korozyjnym i przy polaryzacji katodowej. W próbie rozciągania z małą prędkością odkształcenia próbek gładkich jako mierniki podatności na kruchość wodorową przyjęto:...
-
Przyczyny pękania wspomaganego przez wodór rozdzielaczy paliwa w silnikach okrętowych
PublicationWykorzystano badania skłonności stali 26H2MF i 34HNM do niszczenia środowiskowego przy rozciąganiu próbek ze stałą małą prędkością, przy obciążeniu stałym dla próbek z karbem oraz przy obciążeniu cyklicznie zmiennym w środowiskach paliwa kotłowego i przepracowanego oleju mineralnego. Obserwowano szybkie pękanie stali w badaniach zmęczeniowych, niewielką utratę plastyczności w próbach statycznego rozciągania oraz brak efektu w próbie...
-
Intensywność skażenia grafitu w żeliwie sferoidalnym niestopowym docieranym luźnym ścierniwem.
PublicationPrzedstawiono wyniki badań skażenia powierzchni żeliwa sferoidalnego niestopowego docieranego luźnym ścierniwem. Ta wada docierania materiałów miękkich lub zawierających składniki o niskiej twardości ma istotne znaczenie zarówno ze względów technologicznych jak i eksperymentalnych. W przeprowadzonych eksperymentach skażenia grafitu wykorzystano mikroskopy skaningowe i mikroanalizę rentgenowską powierzchniową.
-
Contribution to the capacity analysis of the classic composite girder of Möller
PublicationThe analysis (brief history, experiments, numerical method) of the classic composite girder of Moller has been presented.
-
Analiza miar narażenia na ryzyko w ruchu drogowym
PublicationNarażenie na ryzyko jest elementem składowym ryzyka społecznego. W artykule przedstawiono analizę miar narażenia na ryzyko w ruchu drogowym. Przedstawiono ewolucję definicji narażenia na ryzyko w ruchu drogowym, a następnie scharakteryzowano najczęściej stosowane i proponowane do analizy miary narażenia na ryzyko. Wykorzystując analizę regresji korelacji określono siłę współzależności pomiędzy piętnastoma miarami narażenia na ryzyko,...
-
Diagnostyka obiektów przemysłowych z wykorzystaniem wspólnej magistrali usług DIAGNOSTIC SERVICE BUS DSB
PublicationKorzystając ze znanego pojęcia magistrali, w pracy przedstawia się sposób przystosowania i wykorzystania magistrali usług w systemie diagnostyki obiektów przemysłowych. Koncepcja takiego środka komunikacyjnego opiera się na architekturze SOA (z architekturą zorientowanej na usługi). Koncepcja ta stanowi metodę rozwiązania problemów wydajnościowych rozwijanego projektu pt. "Sieciowy Monitor Obiektu" (SMO). Wspólna szyna danych zwiększa...
-
Metody sprzęgania modeli dynamiki rurociągów przemysłowych
PublicationArtykuł opisuje dwie metody sprzęgania modeli dynamiki rurociągów przesyłowych. Stanowią one niezbędny element przy budowie efektywnych systemów symulacji rozległych i złożonych instalacji rurociągów stosowanych w przemyśle. Pierwsza z proponowanych metod (globalna metoda sprzęgania - GMS) wykorzystuje 'globalne' (w skali modelu) zależności (oraz fizyczne przybliżone zależności) pomiędzy ciśnieniem i przepływem masowym medium w...
-
The new steel-glass architecture of buildings in Japan
Publication.
-
Deformations of the steel schell of a vertical cylindrical tank caused by underpressure
PublicationUnderpressure in a tank with a fixed roof may arise in the final stage of its construction as well as during its usage. This article presents stages of deformations of the tank shell and their development from the occurrence of the first deformation to either removal of the causes of underpressure or cracking of the steel shell.
-
Wpływ jakości pomiarów eksploatacyjnych bloków energetycznych na wyznaczanie symptomów niesprawnej pracy
PublicationW pracy opisano jedną z metod zminimalizowania błędów pomiarowych pojawiających się przy funkcyjnym wyznaczaniu wzorca sprawnej pracy obiektów energetycznych dużej mocy. Zajęto się problemem oceny jakości pomiarów związaną z występującą koniecznością okresowych wymian czujników pomiarowych ze względu na ich rozkalibrowywanie eksploatacyjne. Przedstawiono obliczenia symulacyjne wpływu takich wymian na niepewność wyznaczania wzorca...
-
Dynamic analysis of the first stage compressor bladed disc of an aircraft engine
Publication -
The aluminium and polycarbonate covering to the roof over the stadium in Gdańsk
PublicationThis paper presents information about structural elements of the roof covering to the stadium in Gdansk built for the 2012 European Football Championship in Poland and the Ukraine. The paper discusses elements of the polycarbonate covering, the supporting structure and the drainage system. It also provides information about tests and research performed prior to construction, which determined the solutions adopted as well as...
-
Education Towards The Use Of BIM On The Example Of Polish Universities
PublicationBIM (Building Information Modeling) has been one of the rapidly developing fields of digital techniques supporting the realization of construction projects in recent years. Further development, and especially the use of these techniques, depends to a large extent on the qualifications of young construction engineers who start their professional careers in this field. The article attempts to synthetically list and compare subjects,...
-
Ocena bezpieczeństwa statku w czasie katastrofy na morzu
PublicationW pracy przedstawiono podstawowe charakterystyki statku w stanie uszkodzonym. Omówiono metody oceny bezpieczeństwa statków w stanie uszkodzonym. Przedstawiono proponowaną metodę oceny bezpieczeństwa statku w stanie uszkodzonym wraz z procedurą możliwą do wykorzystania w warunkach operacyjnych. Opisano całościowy model ryzyka wypadku.
-
Stability and load bearing capacity of a braced truss under upward wind loading
PublicationThe paper is focused on the numerical and experimental investigation of stability of a steel truss under upward wind loading. The structure was stiffened by elastic braces situated at the top and bottom chord. Usually the lateral (translational) brace stiffness is considered. However, the rotational stiffness of braces caused by interaction between torsional stiffness of the truss top chord and bending stiffness of the roof elements...
-
The effect of an active force while slide diamond burnishing of wooden shafts upon process quality
PublicationThe quality of the surface of wooden elements that have been turned and burnished has got a crucial meaning in the whole production process flow, since the obtained effects affect the quality of the wooden surface after finishing (coating, painting). In the paper, selected results of the investigation of the effect of the burnishing process on the surface quality of the elements after turning are presented. Research experiments...
-
Analysis and evaluation of grouping methods for effective cutting tool operation
PublicationThis article presents the possibilities for using cluster analysis in the assignment of machine tools in automated manufacturing systems. Based on the similarity of manufacturing processes in the system, cutting tools have been grouped. The objective was to obtain groups of similar objects, which could potentially ensure the reduction of the frequency and time of setups, optimizing the maintenance of tool resources and improving...
-
Deposition and Electrical and Structural Properties of La0.6Sr0.4CoO3 Thin Films for Application in High-Temperature Electrochemical Cells
PublicationLow-temperature deposition of electroceramic thin films allows the construction of new devices and their integration with existing large-scale fabrication methods. Developing a suitable low-cost deposition method is important to further advance the development of microdevices. In this work, we deposited a 1-lm-thick La0.6Sr0.4CoO3d (LSC) perovskite with high electrical conductivity on sapphire substrates at 400C and analyzed its...
-
Airstrip Ground Improvement Works by Blasting Charge Technique and Dredged-Ash Material Mixture
PublicationSoil improvement by blasting charge technique is known in geotechnics as one of the efficient and inexpensive method. It can be used in preparing of underground to found road construction and buildings as well. The technique proves usefulness especially when dynamic load is applied. It is because of non-stiff or rather resilient type soil after improvement. In noncohesive or organic soil, blasting charge...
-
Study of the formation of calcareous deposits on cathodically protected steel in Baltic sea water
PublicationPurpose – The purpose of this paper is to investigate whether the sedimentation of calcareous deposits occurs on cathodically protected steel in Baltic sea water. Design/methodology/approach – Steel electrodes were cathodically polarized in natural Baltic sea water at potential þ0.150 V vs Zn electrode in potentiostatic mode. During exposure chronoamperometric measurements were carried out. After the exposure, the electrode’s surface...
-
Digitalization of Building Site Management in the Construction Industry
PublicationWith Industry 4.0, a digital transformation has started in the construction industry. However, 4.0 technologies have difficulties in the integration of digital systems due to the diversity and complexity of the processes in the construction industry. Multidisciplinary work in architectural projects and the need for high productivity require digital renovation planning in the construction industry. The application of the technologies...
-
ASSESSMENT of PERFORMANCE of UMV (2024)
e-Learning Courses(W) Assessment of Performance of Unmanned Maritime Vehicles (W-Lecture) - DAPE - WIMiO AP-of-UMV (W) -DAPE - WIMiO The course entitled "Assessment of Performance of Unmanned Maritime Vehicles (W-Lecture)" is conducted for the DAPE WIMiO Students. The AP-of-UMV (W) course is to discuss the following problems: - major areas of application of UMV unmanned maritime vehicles, - sea environment, - types of UMV vehicles, -...
-
Activating Public Space: How to Promote Physical Activity in Urban Environment
PublicationPhysical activity is an essential component of a healthy lifestyle. The quality and equipment of urban public space plays an important role in promoting physical activity among people (residents, tourists). In order for recreation and sports activities to be undertaken willingly, in a safe and comprehensive manner, certain spatial conditions and requirements must be met. The distinctive feature of contemporary large cities is the...
-
Road Restraint Systems as a Basis for Roadside Safety Improvement
PublicationRoadside-related crashes occur when vehicles run off the road. The majority of the crashes have severe outcomes, especially when an object is hit (tree, pole, supports, front wall of a culvert, barrier). These accidents represent app. 19% of all of Poland's road deaths. Roadside crashes involve: hitting a tree, hitting a barrier, hitting a sign or utility pole, vehicle roll-over on the roadside, vehicle roll-over on a slope and...
-
Mariusz Figurski prof. dr hab. inż.
PeopleMariusz Józef Figurski (born 27 April 1964 in Łasinie, Poland) - Polish geodesist, professor of technical sciences, professor at the Gdańsk University of Technology. Early life and education He passed the matriculation examination in 1983 after he had finished Jan III Sobieski High school in Grudziądz. He graduated the Military University of Technology on an individual mode at the Faculty of Electromechanics and Civil Engineering...
-
Dominik Jasiński dr
PeopleDominik Jasiński is an alumni of International Engineering Doctorate programme completed in the UK at the Warwick Manufacturing Group, faculty of the University of Warwick. He received his Engineering Doctorate degree in 2019 in sustainable materials and sustainable manufacturing. His doctorate project was sponsored by EPSRC and Jaguar Land Rover and the aim of which was to investigate how large manufacturing organisation in the...
-
Causes of Delay in Highway Projects in Pakistan”
Publication -
Influence of water soaking on the ultimate tensile strength of polyester-based coated woven fabrics
PublicationThis research aims to determine the influence of water-soaking on polyester-based coated woven fabrics for ultimate tensile strength and elongation at break under uniaxial tensile tests. The paper begins with a short survey of literature concerning the investigation of the determination of coated woven fabric properties. The authors carried out the uniaxial tensile tests with an application of a flat grip to establish the values...
-
Influence of cyclic frozen and defrost on mechanical properties of polytetrafluoroethylene (PTFE)-coated woven fabrics
PublicationThis research aims to determine the influence of the cyclic process of freezing and defrosting on the mechanical properties of the chosen glass fibres and PTFE-coated woven fabrics. The specimens were subjected to freezing at about −20 °C for 4 h and thawing by full immersion into the water at about +20 °C for 4 h. The fabric samples after 25 and 50 frozen cycles were air-dried at room temperature for one week and then subjected...
-
Environmental aspects of coastal earth structures made of soil-ash composites
PublicationThis paper presents an innovative technology of building the coastal dams with the use of soil-ash composites. A natural- scale test stand and results of the performed environmental tests are presented ; they have been compared with standards for purity of soils and waters. Also, an analysis of the obtained results and discussion of trends and anomalies in the observations, are given.
-
Influence of Water-Induced Degradation of Polytetrafluoroethylene (PTFE)-Coated Woven Fabrics Mechanical Properties
PublicationThe impact of water-induced degradation on the mechanical properties of the chosen two PTFE-coated, glass threads woven fabrics is investigated in this paper. The paper begins with a survey of literature concerning the investigation and determination of coated woven fabric properties. The authors carried out the uniaxial tensile tests with an application of flat and curved grips to establish the proper values of the ultimate tensile...
-
Ewa Klugmann-Radziemska prof. dr hab.
PeopleEwa Klugmann-Radziemska graduated from the University of Gdansk with a degree in physics, and since 1996 has been associated with the Gdansk University of Technology, when she began PhD studies. Currently, he is a professor at the Faculty of Chemistry at the Gdansk University of Technology, since 2006 head of the Department of Chemical Apparatus and Machinery. In the years 2008–2016 she was the Vice-Dean for cooperation and development,...