Search
displaying 1000 best results Help
Search results for: wages, labour production
-
Decisional-DNA-Based Digital Twin Implementation Architecture for Virtual Engineering Objects
PublicationDigital twin (DT) is an enabling technology that integrates cyber and physical spaces. It is well-fitted for manufacturing setup since it can support digitalized assets and data analytics for product and process control. Conventional manufacturing setups are still widely used all around the world for the fabrication of large-scale production. This article proposes a general DT implementation architecture for engineering objects/artifacts...
-
Module architecture as alternative approach to traditional construction processes
PublicationModule architecture today is a special type of building construction process that combines repetitive design, low-cost production based on prefabricated elements and fast erection. Module does not mean the same as modular. In general, module architecture today refers to the design of any system composed of separate components, manufactured before in factory, that can be connected together at the building site much faster than normally....
-
Polarization-sensitive optical coherence tomography for ceramic materials inspection
PublicationCeramics production is looking for a fast, reliable and non-destructive method that can be implemented on site for defect detection and analysis. In this paper we present polarization-sensitive optical coherence tomography (PS-OCT) as a method for defect inspection. Proposed extensions to standard OCT provide additional information for complete characterization of tested object. We compare OCT and microscope imaging that can easily...
-
Solar-wind system for lightning of public areas
PublicationSolar-wind system was developed for illumination of public large areas. The energy of this system becomes from renewable sources. Furthermore, they are relatively inexpensive, and the production of pollutants or greenhouse gases are reduced.
-
THE METHOD OF ENERGY-EFFICIENCY INVESTIGATIONS OF THE NEWLY PRODUCED MARINE FUELS THROUGH AN APPLICATION OF THE LABORATORY DIESEL ENGINE
PublicationThe article deals with one of the scientific issue solved within frames of the research project financed by Voivodeship Fund for Environmental Protection and Water Management in Gdansk, namely, in particular, the method of energy investigations of the self-ignition engine in conditions of its supply with a non-standard (modified) marine fuel. The representative results of engine tests worked out on the especially built laboratory...
-
Exploring the Usability and User Experience of Social Media Apps through a Text Mining Approach
PublicationThis study aims to evaluate the applicability of a text mining approach for extracting UUX-related issues from a dataset of user comments and not to evaluate the Instagram (IG) app. This study analyses textual data mined from reviews in English written by IG mobile application users. The article’s authors used text mining (based on the LDA algorithm) to identify the main UUX-related topics. Next, they mapped the identified topics...
-
Collective creativity in management science
PublicationPurpose: The purpose of this paper is to establish the current state of knowledge on collective creativity in management science on the basis of a systematic literature review. Methodology: A systematic review was performed based on the three-step SPL procedure proposed by Tranfield et al. (2003). Two databases (Scopus and Web of Science) were searched electronically up until March 2022. Based on the secondary data a literature...
-
A rough cut cybersecurity investment using portfolio of security controls with maximum cybersecurity value
Publication -
Risk-averse decision-making to maintain supply chain viability under propagated disruptions
Publication -
Thermal Design of Double Pipe Heat Exchanger Used as an Oil Cooler in Ships: A Comparative Case Study
Publication -
Thermodynamic Analysis of a Closed-Cycle Ocean Thermal Energy Conversion Power Plant for Offshore Platforms
Publication -
Experimental Analysis of a Laboratory-Scale Diesel Engine Exhaust Heat-Driven Absorption Refrigeration System as a Model for Naval Surface Ship Applications
Publication -
Using a computational model to compare objective negotiations in real and virtual environments
PublicationZaprezentowano obliczeniowy model negocjacji uwzględniający warunki początkowe, przebieg negocjacji i wyniki negocjacji. Przedstawiono komputerowy system wspomagający rejestrację przebiegu negocjacji i ich wyników oraz analizę negocjacji zgodną z proponowanym modelem.
-
Developing a model of cooperation between universities and business - the generalization of cases of cooperation
PublicationThe aim of this paper is to present a model of cooperation between universities and business.
-
Some engineering applications of ANN in CAD
PublicationW pracy przedstawiono zastosowanie sztucznych sieci neuronowych: dla obliczeń i doboru regulatora pneumatycznego, w optymalizacji pneumatycznych układów napędowych i w optymalizacji systemu amortyzacji siedziska.
-
The risk assessment of adverse events of nursing activities as the element of quality management in healhcare
PublicationThe purpose of the paper is to present MedCARVER+Shock method and Pareto analysis and its usability for the risk assessment of adverse events of nursing activities. 888 activities carried out by all 190 nurses working at the District Hospital X located in Poland were taken into account. During the research the qualitative approach was used. As the result sixteen groups of nursing activities causing the highest risk of adverse events...
-
PROJECT IMPLEMENTATION IN ORGANISATIONS OF REPETITIVE ACTIVITIES
PublicationThe study presents the implementation of projects in organisations that achieve business objec-tives through the implementation of repetitive actions. Projects in these organisations are, on the one hand, treated as marginal activities, while the results of these projects have significant impact on the delivery of main processes, e.g. through the introduction of new products. Human capital and solutions in this field bear impact...
-
Virtual engineering process (VEP): a knowledge representation approach for building bio-inspired distributed manufacturing DNA
PublicationThe objective of this research is to provide a user-friendly and effective way of representing engineering processes for distributed manufacturing systems so that they can develop, accumulate and share knowledge. The basic defini-tion and principle of the approach is introduced first and then the prototype version of the system is developed and demonstrated with case studies, which verify the feasibility of the proposed approach....
-
On Deck Oil Spill Clean-Up Materials – Solution for Engine Rooms
Publication -
REDUNDANCY AS A WAY INCREASING RELIABILITY OF SHIP POWER PLANTS
PublicationOne of key ways of assuring a high level of reliability of a ship power plant is to design redundancy of its structural elements, for example redundancy of prime drivers, drivelines etc. This paper deals with issues related to the redundancy as a way increasing dependability of the ship power and propulsion systems. Especially, fundamental characteristics of dependability, major design strategies influencing the reliability, and...
-
The Emission and Combustion Characteristics of Marine Diesel Engine with Extreme Throttled of Air or Exhaust Ducts
PublicationPresented paper shows the results of the laboratory tests on the relationship between the extreme throttling of both air intake duct and exhaust gas duct and gaseous emission from the marine engine. The object of research is a laboratory, 4-stroke, DI diesel engine, operated at loads from 50 kW to 250 kW at a constant speed equal to 750 rpm. During the laboratory tests the thermodynamic and exhaust gas emission characteristics...
-
APPLICATION OF REDUNDANCY IN SHIP POWER PLANTS OF OFFSHORE VESSEL
PublicationPower and propulsion systems of offshore units must be of a very high level of reliability. The loss of ability to perform functions of their components causes generally to very high economic losses, which may be increased by unused the weather window resulting to postponing the planned offshore operations. To ensure carrying out so expensive offshore operations in the most reliable way, various types of redundancies are built-in...
-
Integration of Lean Manufacturing with ISO Management Systems in Enterprise
PublicationLean manufacturing [LM], quality management system and environmental management system are clear initiatives with a goal of improving effectiveness and efficiencies of organizations. Many organisations tackle lean philosophy, ISO standards individually but this kind of attempt do not focus on the synergy and the advantage from the potential collaboration. This paper aims to present the possibility of integration Lean Management...
-
AutoCAD: Examination of Factors Influencing User Adoption
PublicationThe primary purpose of the research is to examine and validate determinants of user intention to use AutoCAD software, utilising the constructs from prior studies in a more integrated model. The paper proposes a revised Technology Acceptance Model (TAM) for measuring the adoption of AutoCAD. In the study, a latent construct PPA (perceived physical accessibility) was added to the proposed research model as a new determinant of AutoCAD...
-
Organisational Competence vs Transferability of Knowledge in Cluster Organisations and Technology Parks
PublicationPurpose. The main paper aims to evaluate the impact of organisational competence on knowledge and information flows within cluster organisations and technology parks, with particular emphasis on innovative content knowledge. The paper addresses the research question: “What set of competencies of cooperating companies allows access to information and knowledge in cluster and parks structures?" Methodology. The authors report their...
-
To meet or to connect? Face-to-face contacts vs ICT in cluster organisations
PublicationThe main purpose of the paper is to explore how cluster organisations (COs) take advantage of direct (F2F) and indirect (ICT) contacts in fulfilling their main roles. The paper addresses the research question: “How important are Information and Communication Technologies at each level of advancement of cluster cooperation?” The research was conducted in 2016 in four purposefully selected cluster organisations representing metal...
-
Material characterisation of biaxial glass-fibre non-crimp fabrics as a function of ply orientation, stitch pattern, stitch length and stitch tension
PublicationDue to their high density-specific stiffnesses and strength, fibre reinforced plastic (FRP) composites are particularly interesting for mobility and transport applications. Warp-knitted non-crimp fabrics (NCF) are one possible way to produce such FRP composites. They are advantageous because of their low production costs and the ability to tailor the properties of the textile to the reinforcement and drape requirements of the application....
-
Heterotrophic Anodic Denitrification in Microbial Fuel Cells
PublicationNowadays, pollution caused by energy production systems is a major environmental concern. Therefore, the development of sustainable energy sources is required. Amongst others, the microbial fuel cell (MFC) seems to be a possible solution because it can produce clean energy at the same time that waste is stabilized. Unfortunately, mainly due to industrial discharges, the wastes could contain nitrates, or nitrates precursors such...
-
Aleksandra Teresa Wiśniewska dr inż.
Peopleeducation Postgraduate studies in “ Scandinavian Studies“ University of Gdańsk (2019-2020), Postgraduate studies in "Research Project Management and Commercialization of Research Results" Gdańsk University of Technology, Faculty of Management and Economics (2010–2011), Postgraduate studies "Control & Management of Lean Manufacturing in Network Systems", Fachhochschule Karlsruhe (1998–2000), Master's studies "Automation...
-
Zyed Achour Phd
PeopleZyed Achour has a PhD in Management Science and is an Assistant Professor at the National Institute of Labour and Social Studies, University of Carthage. He is member in the "Gouvernance d'Entreprise Finance Appliquée et Audit" (GEF2A) Laboratory- (Higher Institute of Management- University of Tunis). Among his Reserach interest are social dimensions of Strategic Management, Firm Performance, Sustainability and Corporate Social...
-
ENVIRONMENTAL ASSESSMENT OF SOLAR CELL MATERIALS
PublicationIn today’s world, fossil fuels, including coal, oil, and gas, are the primary energy sources from which electricity is obtained. As they are exhaustible and their exploitation has a negative impact on the natural environment, they should be, at least partially, replaced by renewable energy sources. One of these sources is solar energy. The use of solar energy releases no CO2, SO2, or NO2 gases, and does not contribute to global...
-
Maximizing Bio-Hydrogen and Energy Yields Obtained in a Self-Fermented Anaerobic Bioreactor by Screening of Different Sewage Sludge Pretreatment Methods
PublicationEgypt faces significant challenges in managing its sewage sludge generated in large quantities from wastewater treatment plants. This study investigates the feasibility of utilizing sewage sludge as a renewable resource for hydrogen production through anaerobic digestion at the 100 L bioreactor level. Hydrogen is considered a promising alternative energy source due to its high energy content and environmental benefits. To optimize...
-
Market Size, Competitiveness and Technological Frontier - the Impact of Trade Integration with the UE on Productivity in Polish Manufacturing Sectors
PublicationThis paper addresses the relationship between growth of relative productivity in Polish manufacturing sectors and forces stemming from trade integration with the EU. We look at the productivity growth from the perspective of relations between Polish manufacturing sectors and the foreign ones, focusing on partner countries from the enlarged EU. Empirical analysis is based on sector level bilateral data concerning both domestic (Polish)...
-
Impact of the Manufacturing Sector on the Export Competitiveness of European Countries – a Spatial Panel Analysis
PublicationThe purpose of this paper is to determine how changes in the export competitiveness of the EU economy (measured by exports and net exports) depend on changes in the competitiveness of processing industries, on the basis of manufacturing data from 19 EU countries over years 1995-2009 and using a spatial panel data model. The determinants of export competitiveness are selected in the light of predictions from international trade...
-
UNDECLARED WORK IN POLAND CHARACTERISTICS AND PREVALENCE
PublicationThis article aims to present the significance and prevalence of the phenomenon of undeclared work. First, we discuss the definitional issues of this phenomenon. Then, we present previous estimates on shadow economy and undeclared work in Poland, based on statistics provided by Central Statistical Office and other research entities. Our analysis covers the years 2000–2014. In the last part of the article, we use data from the Labour...
-
MOOCs in SP4CE - case studies (Strategic Partnership for Creativity and Entrepreneurship)
PublicationSP4CE stands for Strategic Partnership for Creativity and Entrepreneurship project which has been funded with support from the European Commission under the ERASMUS+ Programme in the period 1st September 2014 - 31st August 2017. The main purpose of SP4CE project is to design innovative e-learning tools for collaboration between students, enterprises and teachers. It concentrates on identifying users’ needs and supports the development...
-
The Self-employment of Women in Azerbaijan
PublicationAzerbaijan has a population of more than 10 million, of which women accounted for 50% in 2020. At the same time, 93% of Azerbaijan’s citizens describe themselves as Muslims. Since the beginning of independence, Azerbaijan has been a secular state by virtue of Article 48 of the Constitution, which guarantees the freedom of worship, choice, or non-practice of religion and the freedom of...
-
Electronics for Mechanical Engineering (2023)
e-Learning CoursesName of the course: Electronics (M:32011W0)Specialization: Design and Production Engineering (WM), 1st degree - bachelor/eng., stationary, 2018/2019 - winter semester (currently sem. 4) Number of hours: 30hECTS points: 2 Teacher (lecture/laboratories): Piotr Kurgan
-
Metody redukcji zróżnicowania materiałów wejściowych w warunkach wysokiej różnorodności produktów gotowych
PublicationArtykuł opisuje zagadnienie związane z negatywnym wpływem wysokiego zróżnicowania materiałów wejściowych w procesach produkcyjnych o wysokiej różnorodności produktów gotowych. W pierwszej części pracy opisane zostało oddziaływanie zróżnicowania materiału na podstawowe mierniki skuteczności procesu produkcyjnego z uwzględnieniem cen zakupu materiałów, kosztów utrzymania zapasów, jakości produktu oraz wydajności maszyn i urządzeń....
-
Technologie wytwarzania żywności funkcjonalnej. Metodyki badania jej składu. Kierunki rozwojowe- cz. I
PublicationObserwuje się rozwój technologii produkcji żywności w kierunku wzmocnienia funkcji jej składników, które wspomagają system odpornościowy, przyczyniają się do zapobiegania rozwoju chorób sercowo-naczyniowych czy dolegliwości żołądkowych. Można stwierdzić, że nastąpił coraz bardziej zauważalny postęp w dziedzinie nanotechnologii, której metody są przydatne w procesach produkcji żywności bezpiecznej, o dłuższym terminie przydatności...
-
Biowodór, „paliwo przyszłości”, dotychczasowe metody otrzymywania , porównanie metod otrzymywania
PublicationWodór jest ważnym pierwiastkiem w przemyśle chemicznym. Biowodór wydaje się być użytecznym odnawialnym nośnikiem energii, który mógłby zastąpić paliwa kopalne. Największym problemem wodoru jest jego rzadkie występowanie w czystej formie molekularnej H 2 . Dlatego otrzymanie biowodoru w objętościach opłacalnych ja ko surowiec czy biopaliwo wiedzie przez bioodpady „przesycone” wodorem. Każdy związek...
-
Identification of L. monocytogenes and atypical isolates by MALDI TOF MS.
Open Research DataThe data represent the results of research within the scientific activity Miniatura 5 entitled "Characterization of atypical Listeria monocytogenes strains isolated from the food production environment financed by the National Science Center (no. DEC 2021/05/X/NZ9/00143). The aim of this part of the project was (i) to determine the peptide composition...
-
Overproduction of CaMet15p native and His-tag versions.
Open Research DataEnzyme of fungal L-methionine biosynthetic pathway: O-acetylhomoserine sulfhydrylase (Met15p) could be exploited as molecular target for antifungal chemotherapy. The goal of the study was to obtain conditions optimal for protein production with the use of prokaryotic cells. The constructed expression plasmids, designed in three different versions: encoding...
-
Overproduction of CaStr2p native and His-tag versions.
Open Research DataEnzyme of fungal L-methionine biosynthetic pathway: cystathionine-γ-synthase (CaStr2p) could be exploited as molecular target for antifungal chemotherapy. The goal of the study was to obtain conditions optimal for protein production with the use of prokaryotic cells. The constructed expression plasmids, designed in three different versions: encoding...
-
Study of the chemical state of Gd in a Ba-La-Gd-Co based ceramic
Open Research DataBarium, Lanthanum, Gadolinium and Cobaltium precursors were used for production of ceramic materials. Samples were produced by standard solid state reaction. Samples were annealed at 300 Celsius degree in wet and dry atmosphere. Annealing takes 72h or 2h. Results of annealing on a Gadolinum were observed by X-Ray photoemission spectroscopy (XPS), OmicronNanotechnology....
-
Overproduction of homoserine O-acetyltransferase (CaMet2p) native and His-tag versions.
Open Research DataEnzyme of fungal L-methionine biosynthetic pathway: homoserine O-acetyltransferase (Met2p) could be exploited as molecular target for antifungal chemotherapy. The goal of the study was to obtain conditions optimal for protein production with the use of prokaryotic cells. The constructed expression plasmids, designed in three different versions: encoding...
-
TOXICOLOGICAL ASSESSMENT OF FOOD PACKAGES EXTRACTS
PublicationIn the scientific literature related to the widely understood issue of packaging materials designed to have contact with food (Food Contact Materials – FCM) there is much information on raw materials used for their production, their physiochemical properties, types and parameters. There is also a great number of publications on the management and disposal of used packaging. Unfortunately, not much attention is given to the matters...
-
A city and a wind farm. Landscape perspective
PublicationThe aim of the paper is to present the problems of the location of the wind farms in close neighbourhood to the historical cities, and the ways to minimize the potential landscape threats. The production of clean energy is obligatory in EU. In spite of how positive to the environment the wind energy production is, it may cause negative effects. The results of landscape studies of two towns in Poland prove that the location of such...
-
Wind resource assessment and energy yield prediction for the small wind turbine on the Szubieniczne Hill
PublicationThe goal of this study is to preliminary assess the wind resources on the Szubieniczne Hill in order to predict the annual energy production for planned small wind turbine. The analyzed site is located close to the Gdańsk University of Technology campus, in complex urban environment additionally surrendered by forested hills. The assessment is based on Computational Fluid Dynamics simulations which allow to evaluate the wind energy potential...
-
Polyurethanes for Coating, Adhesives, and Other Applications
PublicationAn interesting group of polyurethane (PU) materials are coatings, adhesives, sealants, and thickeners. A wide base of raw materials and various methods of PU synthesis allows production of materials with a wide range of properties that can be commonly used in many industries. This chapter describes the main types of PU coatings and adhesives and special application PUs and the methods of their production. The materials described...