Filtry
wszystkich: 2647
wybranych: 1566
wyświetlamy 1000 najlepszych wyników Pomoc
Wyniki wyszukiwania dla: CARRY LOOK AHEAD ADDER
-
Effect of the let-through energy of overcurrent protective devices on the temperature of conductors during short-circuits
PublikacjaThe scope of the verification of low-voltage systems covers the earth fault loop impedance measurement. This measurement is usually performed with the use of low-value current meters, which force a current many times lower than the one occurring during a real short-circuit. Therefore, the international standard recommends consideration of the increase of resistance of conductors with the increase of temperature, which may occur...
-
Comparison of Tracking Methods in Respect of Automation of Animal Behavioral Test
PublikacjaAutomation in experiments carried out on animals is getting more and more important in research. Computers take over laborious and time-consuming activities like recording and analysing images of experiment scene. The first step in an image analysis is finding and distinguishing between the observed animals, and then tracking all objects during the experiment. In this paper four tracking methods are presented. Quantitative and...
-
Exchange-Traded Funds in Europe
PublikacjaExchange-Traded Funds in Europe provides a single point of reference on a diverse set of regional ETF markets, illuminating the roles ETFs can play in risk mitigation and speculation. Combining empirical data with models and case studies, the authors use diffusion models and panel/country-specific regressions—as well as graphical and descriptive analyses— to show how ETFs are more than conventional, passive investments. With new...
-
Music signal equalization in a changing environment
PublikacjaThe paper presents the concept of an automatic system for music signal correction, considering room frequency response and music genre being played. The proposed algorithm, based on the room frequency response, compensates acoustic conditions surrounding the sound source. Additionally, the compensation process considers the signal content by recognizing music genre. As part of the described research, a series of subjective tests...
-
Development of an emulation platform for synchronous machine power generation system using a nonlinear functional level model
PublikacjaThe article presents the Power Hardware in the Loop (PHIL) approach for an autonomous power system analysis based on the synchronous generator model incorporating magnetic saturation effects. The model was prepared in the MATLAB/Simulink environment and then compiled into the C language for the PHIL platform implementation. The 150 kVA bidirectional DC/AC commercial-grade converter was used to emulate the synchronous generator....
-
Wyzwania współpracy z robotem jako członkiem zespołu
Publikacja– Cel: Ocena, jakie są przekonania dotyczące współpracy z robotami w zespole, jakie są obawy i oczekiwania związane z „zatrudnianiem” robotów. – Metodyka badań: Badania ilościowe zrealizowane z zastosowaniem kwestionariusza ankiety w grupie 593 specjalistów IT. – Wyniki badań: Roboty nadal traktowane są głównie jako narzędzia, nie jako podmioty uczestniczące w pracy zespołu. Przekonanie, że obecność robota w zespole nie wyeliminuje...
-
THE DETERMINATION OF ABRASION RESISTANCE OF SELECTED BIOMATERIALS FOR THE FRICTION PAIRS IN THE HIP JOINT ENDOPROSTHESIS
PublikacjaThe key requirement for the modern endoprosthesis is high durability of the friction components, which results in long and trouble-free operation in the human body. The durability of currently used endoprosthesis is often limited by tribological wear processes of friction components (e.g. between the head and the acetabular component in a hip joint endoprosthesis) [8, 19, 23, 24]. In order to compare the tribological wear, tribological...
-
Examining Acoustic Emission of Engineered Ultrasound Loudspeakers
PublikacjaMeasurement results of the sound emitted from an ultrasound custom-made system with high spatial directivity are presented. The proposed system is using modulated ultrasound waves which demodulate in nonlinear medium resulting in audible sound. The system is aimed at enhancing the users’ personal audio space, therefore the measurements are performed using the Head and Torso Simulator which provides the realistic reproduction of...
-
Impact of temperature on optical sensing in biology based on investigation of SARS‐CoV ‐2
PublikacjaIn this paper, we present an investigation of the influence of the temperature on the sensing of biological samples. We used biofunctionalized microsphere-based fiber-optic sensor to detect immunoglobulin G attached to the sensor head at temperatures relevant in biological research: 5°C, 25°C, and 55°C. The construction of the sensor allowed us to perform measurements in the small amount of solution. The results of our experiment...
-
Objectivization of audio-video correlation assessment experiments
PublikacjaThe purpose of this paper is to present a new method of conducting an audio-visual correlation analysis employing a head-motion-free gaze tracking system. First, a review of related works in the domain of sound and vision correlation is presented. Then assumptions concerning audio-visual scene creation are shortly described. The objectivization process of carrying out correlation tests employing gaze-tracking system is outlined....
-
Zmienność termicznego charakteru okresów zimowych w Polsce i jej przyczyny
PublikacjaPraca przybliża problematykę funkcjonowania fenomenu klimatycznego Oscylacji Północnego Atlantyku (Norh Atlantic Oscillation – NAO) oraz omawia jej wpływ na kształtowanie charakteru termicznego zim (grudzień – marzec) na obszarze Polski. Zmiana faz NAO z w przewadze ujemnych na w przewadze dodatnie, jaka nastąpiła w latach 1987-1989 spowodowała, że po roku 1989 obserwuje się w Polsce znaczne złagodzenie stopnia ostrości zim.
-
Mrówczan sodu z nowym pakietem inhibitorów korozji jako ekologiczny środek do odladzania infrastruktury lotniczej.
PublikacjaPrzedstawiono wyniki badań korozji kadmowej powłoki na stali oraz korozji po zanurzeniu stopów metali w mrówczanie sodu z nowym pakietem inhibitorów korozji, zawierającym synergiczną kompozycję poliasparaginianu sodu oraz imidazolu. Ponadto wyznaczono zdolność penetracji lodu przez badany układ. Właściwo- ści opracowanej kompozycji odladzającej porównano z właściwościami środków dostępnych na rynku. Uzyskane wyniki wskazują, że otrzymany...
-
Labour share and income inequalities in the European Union, taking into account the level of development of economies
Publikacjaesearch background: The relationship between labour share and income inequality is a complex and multifaceted problem. Despite ongoing discussions among economists, there is still no consensus on the direction of the relationship between labour share and income ine-quality. Purpose of the article: The article aims to assess the impact of labour share on income inequal-ity, which is measured in three ways: the Gini index...
-
Functional phase bistability in a nanocrystalline RbMn[Fe(CN)6] thin film fabricated by matrix-assisted laser evaporation
PublikacjaOne of the main barriers hindering applications of Prussian blue metal assemblies is their poor processability, which makes the fabrication of intact thin films very difficult. In this work, a nanocrystalline RbMn[Fe(CN)6]·xH2O film on silicon substrate was obtained for the first time via laser-stimulated deposition and investigated. Temperature-induced phase transition and bistability within broad hysteresis loop (120 K), along...
-
Selected aspects of the evolution of the industry analysis
PublikacjaPorter's five forces is a significant tool of analysis of industries. It helps evaluating variables of industry profitability and assessing firm performance. Using the framework, managers can take a decision as to which industries they can effectively compete in and position their companies to reduce the adverse effects of the mentioned forces. According to the critics, the five forces model is limited to its static nature. The...
-
Optimum Control of Gyroscopic Systems
PublikacjaThe problem of optimum control of transverse rotor vibrations with gyroscopic interactions has been described and solved in the paper. An integral performance index has been defined for such system in order to minimize vibration level of a chosen rotor point. For this reason, an efficient way of finding the weight coefficients of integral performance index for multi-degrees-of-freedom system with gyroscopic interactions has been...
-
Dwa zastosowania procesorów sygnałowych w układach przetwarzania i akwizycji danych
PublikacjaW ciągu ostatnich kilku lat nastąpił skokowy wzrost liczby aplikacji stosujących mikrokontrolery i mikroprocesory w układach pomiarowych. Ten wzrost dotyczy także zastosowań procesorów sygnałowych, pozwalających na wstępne przetwarzanie rejestrowanych danych w czasie rzeczywistym. Możliwość wstępnego przetwarzania istotnie ogranicza liczbę przechowywanych lub przesyłanych do nadrzędnego komputera parametrów w stosunku do liczby...
-
Time variable gain for long range sonar with chirp sounding signal
PublikacjaThe main purpose of applaying Time Variable Gain (TVG) in active sonars with digital signal processing is to reduce dynamic range of echo signal and adapt it to the dynamic range of the analogue to digital conversion. With high transmission losses level, the dynamic range of the input signal in long range sonars can be very high and even exceed 200dB. When chirp sounding signals with matched filtration are used, sonars can raech...
-
The effect of processing on the safety and nutritional value
PublikacjaAgricultural crops as well as animal food raw materials are usually somehow processed before being used by humans. Processing should make them more useful, increase their safety and nutritional value, extend the shelf life, and modify the sensory properties. However, changes and interactions of various compounds in the conditions of processing may generate products toxic or otherwise unsafe for the human organism. The food industry...
-
RNDM 2016 Workshop and 2nd Meeting of COST CA15127-RECODIS: Highlights from the Resilience Week in Halmstad, Sweden
PublikacjaLeading network resilience researchers took part in the Resilience Week on Sept. 12-15, 2016 at Halmstad University, SE by Prof. Magnus Jonsson from the Centre for Research on Embedded Systems (CERES), Halmstad University, SE, and Prof. Jacek Rak from Gdansk University of Technology, PL. It included two major events: - The 2nd Meeting of COST CA15127–RECODIS Action (Resilient Communication Services Protecting End-user Applications...
-
Employment of University Graduates in the Era of Digitalization and Artificial Intelligence: Challenges and Prospects
PublikacjaDigital technologies are profoundly reshaping the labor market, causing structural shifts in the economy and altering the nature of work. These changes have significant implications for youth employment, exacerbating the issue of unemployment. This paper delves into the importance of graduate employment in contemporary society, with a particular focus on the influence of digital technologies and Artificial Intelligence. The authors...
-
Optimization of the Aeration Strategies in a Deammonification Sequencing Batch Reactor for Efficient Nitrogen Removal and Mitigation of N2O Production
PublikacjaIn deammonification systems, nitrite-oxidizing bacteria (NOB) suppression and nitrous oxide (N2O) mitigation are two important operational objectives. To carry out this multivariable analysis of response, a comprehensive model for the N cycle was developed and evaluated against experimental data from a laboratory-scale deammonification granular sludge sequencing batch reactor. Different aeration strategies were tested, and the manipulated...
-
Monte Carlo simulations of the fracture resistance degradation of asphalt concrete subjected to environmental factors
PublikacjaThe paper presents the results of laboratory tests of SCB (semi-circular beam) samples of asphalt concrete, subjected to the destructive effect of water and frost as well as the aging processes. The determined values of material parameters show significant dispersions, which makes the design of mixtures difficult. Statistical analysis of the test results supplemented by computer simulations made with the use of the proprietary...
-
Reinforced concrete thin wall dome after eighty years of operation in maritime climate environment
PublikacjaThe paper presents a description of the construction elements of the Gdynia Seaport main hall dome. Firstly, it provides information about the technical condition of the dome’s structure. Secondly, it examines the strength analysis of the thin-walled reinforced concrete dome covering. Throughout the last 80 years the building has been exposed to an unfavourable marine climate. The analysis of the state of stress and deformations...
-
Large hydrodynamic thrust bearing: Comparison of the calculations and measurements
PublikacjaHydrodynamic thrust bearings, used to carry axial loads in heavily loaded shafts of water power plants hydro turbines, can reach outer diameters even exceeding 5 m. In such large objects scale effect could be observed. According to this, allowable bearing specific load assuring safe operation of the bearings has to be decreased, which increases thrust bearing dimensions. This effect is caused by excessive thermal deflections of...
-
Tilting pad thrust bearing with novel material selection - experimental comparison of low and medium speed operation
PublikacjaThe advances in material engineering led to the development of hard carbon based coatings applied in numerous applications in order to prevent or minimize wear of the parts in contact. With Triondur® coatings, the bearing company Schaeffler has succeeded in halving the friction losses in the valve trains of passenger cars. The coatings are optimized for high abrasive wear protection and low sliding friction moments. Altogether...
-
Efficient knowledge-based optimization of expensive computational models using adaptive response correction
PublikacjaComputer simulation has become an indispensable tool in engineering design as they allow an accurate evaluation of the system performance. This is critical in order to carry out the design process in a reliable manner without costly prototyping and physical measurements. However, high-fidelity computer simulations are computationally expensive. This turns to be a fundamental bottleneck when it comes to design automation using numerical...
-
Analysis of volatile fraction selected hybrid fruits using chromatographic techniques
PublikacjaAt present, "healthy eating" is gaining in popularity. Many people associate this term with eating plenty of vegetables and fruits. The basic elements influencing the selection of fruit are their appearance and smell. Of course, their origin and impact on human health are also very important. In recent years, exotic fruits have become increasingly accessible, making them gaining popularity, even among Poles. You can also meet plants...
-
Thermal efficiency investigations on the self-ignition test engine fed with marine low sulfur diesel fuels
PublikacjaWithin the article an issues of implementing the new kinds of marine diesel fuels into ships’ operation was described taking into ac-count restrictions on the permissible sulphur content introduced by the International Maritime Organization. This is a new situation for ship owners and fuel producers, which forces the necessity to carry out laboratory research tests on especially adapted engine stands. How to elaborate the method...
-
Heat Dissipation from the Power Cable in the Casing Pipe
PublikacjaThe current carrying capacity of a power cable determines its ability to carry a specific current and is related to the efficiency of dissipation of heat generated in the cable laid in a specific environment. The studies were conducted in order to determine how the characteristics of the medium around the cable affected its temperature, and thus the ability of the cable to transmit electricity. The experimentation in the lab and...
-
Merton-type default risk and financial performance: the dynamic panel moderation of firm size
PublikacjaPurpose – The main purpose of this study is to evaluate the probability of default and examine the relationship between default risk and financial performance, with dynamic panel moderation of firm size. Design/methodology/approach – This study utilizes a total of 1,500 firm-year observations from 2013 to 2018 using dynamic panel data approach of generalized method of moments to test the relationship between default risk and financial...
-
Selecting cost-effective risk control option for advanced maritime operations; Integration of STPA-BN-Influence diagram
PublikacjaAdvanced maritime operations, such as remote pilotage, are vulnerable to new emergent risks due to increased system complexity and a multitude of interactions. Thus, maritime researchers this decade have combined Systems-Theoretic Process Analysis (STPA) and Bayesian Network (BN) to effectively manage these risks. Although these methods are effective in identifying hazards and analyzing risk levels, none of the STPA-BN studies...
-
Industry 4.0 Implementation Challenges in Manufacturing Industries: an Interpretive Structural Modelling Approach
PublikacjaFor the last few years, the fourth industrial revolution, known as Industry 4.0, has been a hot topic among academics. Industry 4.0 literature involves researches presenting studies related to its different aspects including challenges, opportunities, implementation and adoption. However, a detailed study of challenges and barriers towards the Industry 4.0 implementation in manufacturing industries is missing. Hence, this paper...
-
Assessing Industry 4.0 Features Using SWOT Analysis
PublikacjaThis paper assesses some features of industry 4.0 by using SWOT analysis that affects the adoption and implementation of industry 4.0. The paper identifies the strengths, weaknesses, opportunities, and threats related to industry 4.0. By the consideration of these four groups of factors, the industrial practitioners can understand how to implement industry 4.0. Moreover, industrial practitioners can use the strengths/opportunities...
-
Latest Insights on Novel Deep Eutectic Solvents (DES) for Sustainable Extraction of Phenolic Compounds from Natural Sources
PublikacjaPhenolic compounds have long been of great importance in the pharmaceutical, food, and cosmetic industries. Unfortunately, conventional extraction procedures have a high cost and are time consuming, and the solvents used can represent a safety risk for operators, consumers, and the environment. Deep eutectic solvents (DESs) are green alternatives for extraction processes, given their low or non-toxicity, biodegradability, and reusability....
-
Mechanism of Solute and Thermal Characteristics in a Casson Hybrid Nanofluid Based with Ethylene Glycol Influenced by Soret and Dufour Effects
PublikacjaThis article models a system of partial differential equations (PDEs) for the thermal and solute characteristics under gradients (concentration and temperature) in the magnetohydrodynamic flow of Casson liquid in a Darcy porous medium. The modelled problems are highly non-linear with convective boundary conditions. These problems are solved numerically with a finite element approach under a tolerance of 10−8. A numerical algorithm...
-
Material independent effectiveness of workpiece vibration in μ-EDM drilling
Publikacja -
Effect of Vascular Lumen Reduction on the Performance and Energy Consumption of an Innovative Implantable LVAD
PublikacjaThis paper presents the results of a study on the effect of vascular lumen reduction on the performance of an innovative implantable LVAD (left ventricular assist device). It details the pressures in the individual cardiac chambers as a function of device frequency. In addition, mass flow rates and energy consumption of the device are examined, varying with lumen reduction and operating frequency. While the lumen reduction of the...
-
Heave Plates with Holes for Floating Offshore Wind Turbines
PublikacjaThe paper presents an innovative solution which is heave plates with holes. The long-known heave plates are designed to damp the heave motion of platforms. They are most often used for Spar platforms. The growing interest in this type of platform as supporting structures for offshore wind turbines makes it necessary to look for new solutions. Based on the available literature and the authors’ own research, it was concluded that...
-
Consequences of New Approach of Chemical Stability Tests of Active Pharmaceutical Ingredients (APIs)
PublikacjaThere is a great need of broaden look on stability tests of active pharmaceuticalingredients (APIs) in comparison with current requirements contained in pharmacopeia.By usage of many modern analytical methods the conception of monitoring the changesof APIs during initial stage of their exposure to harmful factors has been developed. Newknowledge must be acquired in terms of identification of each degradation...
-
Online Interactivity – Shift Towards E-textbook-based Medical Education
PublikacjaTextbooks have played the leading role in academic education for centuries and their form has evolved, adapting to the needs of students, teachers and technological possibilities. Advances in technology have caused educators to look for new sources of knowledge development, which students could use inside and outside the classroom. Today’s sophisticated learning tools range from virtual environments to interactive multimedia resources,...
-
Rural Building in Opole Silesia During the Period of the Frederician Colonization
PublikacjaThe aim of the article is to present the rural construction in the Opole countryside (Poland) during the “Frederician colonization”. Showing socio-economic areas of Opole villages, differing from each other, the differences of which resulted from the environmental conditions influencing the processes of enfranchisement and industrialization. These processes at the turn of the 17th and 19th centuries influenced the image of the...
-
Molecular Recognition in Complexes of TRF Proteins with Telomeric DNA
PublikacjaTelomeres are specialized nucleoprotein assemblies that protect the ends of linear chromosomes. In humans and many other species, telomeres consist of tandem TTAGGG repeats bound by a protein complex known as shelterin that remodels telomeric DNA into a protective loop structure and regulates telomere homeostasis. Shelterin recognizes telomeric repeats through its two major components known as Telomere Repeat-Binding Factors, TRF1...
-
Smart Knowledge Engineering for Cognitive Systems: A Brief Overview
PublikacjaCognition in computer sciences refers to the ability of a system to learn at scale, reason with purpose, and naturally interact with humans and other smart systems, such as humans do. To enhance intelligence, as well as to introduce cognitive functions into machines, recent studies have brought humans into the loop, turning the system into a human–AI hybrid. To effectively integrate and manipulate hybrid knowledge, suitable technologies...
-
Wisdom from Experience Paradox: Organizational Learning, Mistakes, Hierarchy and Maturity Issues
PublikacjaOrganizations often perceive mistakes as negligence and low-performance indicators, yet they can be a precious learning resource. However, organizations cannot learn from mistakes if they have not accepted them. This study aimed to explore how organizational hierarchy and maturity levels influence the relationship between mistakes acceptance and the ability to change. A sample composed of 380 Polish employees working in knowledge-driven...
-
Ischemic stroke in general practice - risk factors, prognosis - prospective single center study
PublikacjaBackground. Ischemic stroke is one of the leading causes of death and disability in Poland, in the European Union and in the United States. Awareness related to the risk factors, particularly the modifiable ones, is of crucial importance in general practice and may improve early and long-term prognoses. Objectives. The aim of this study was to assess the risk factors and half-year survival rate in patients with ischemic stroke...
-
USE OF LANGMUIR PROBE IN DIESEL ENGINE DIAGNOSTIC RESEARCH Part I MEASUREMENT TECHNOLOGY. - Part 1 : MEASUREMENT TECHNOLOGY
PublikacjaIn the paper, the basic assumptions of diesel engine cylinder system's diagnosing method, based on observation of emerging and moving electric charges of ionized gas in the combustion workspaces, using Langmuir's probe. In the first part of the paper, only the technology of the measurement and results of the preliminary diagnostic tests of laboratory engine Farymann Diesel D10 were presented. The primary purpose of the research...
-
3D scanning system for railway current collector contact strips
PublikacjaUndisturbed collection of current from a contact wire of the catenary constitutes one of the basic elements in reliable operation of electrified rail transport, particularly when vehicles move at high speed. Quality of current collection is influenced by the construction of catenary and current collectors, as well as by the technical condition and regulation of these two elements. Total contact force of a current collector head...
-
Measurements and Simulations of Engineered Ultrasound Loudspeakers
PublikacjaSimulation and measurement results of the sound emitted from an ultrasound custom-made system with high spatial directivity are presented. The proposed system is using modulated ultrasound waves which demodulate in nonlinear medium resulting in audible sound. The system is aimed at enhancing the users’ personal audio space, therefore the measurements are performed using the Head and Torso Simulator which provides realistic reproduction...
-
Impact of Cyclist Facility Availability at Work on the Number of Bike Commuters
PublikacjaThe article describes the results of research designed to establish whether cycle provision can influence the number of employees commuting by bike. To that end, employee surveys were conducted in three IT companies in 2012 and 2016. The questionnaire asked about travel behaviour and what the staff thought about their company’s provision of cyclist facilities. Since 2012 each of the companies has moved its head office and the...