Search
Filters
total: 1212
displaying 1000 best results Help
Search results for: recycling circular economy
-
Effect of polymer fibres reinforcement on selected properties of asphalt mixtures
PublicationThe paper presents selected results of the research program concerning fibre reinforced asphalt concrete. Aramid-polyalphaolefin fibres was used in this study. Selected properties responsible for low temperature cracking and resistance to permanent deformation are presented in this paper. Low temperature cracking susceptibility was evaluated with the results obtained from bending test of rectangular beams with constant rate of...
-
Shaping of the turnout diverging track with variable curvature sections
PublicationThe paper presents an analytical method of shaping the turnout diverging railroad track with variable curvature segments on its length, which in an evident way distinguished it from a typical solution, made up of a single circular arc with no transition curves. Two separate causes including a linear and a nonlinear curvature one in the form of a polynomial have been examined. The obtained solutions of the problem have a universal...
-
Roof over PGE Arena in Gdansk. Review of structure and monitoring system
PublicationThis paper presents general structural assumptions of the steel construction designed for a newfootball stadium to be built for UEFA Championship 2012 in the city of Gdańsk. The superstructureis founded directly on the modified abutment. The facade and the roof are collected from 82 steelgirders made of tube profiles. The girders are braced by circular beams and X tension rods. All thiscreates a quasi - dome covered by polycarbonate...
-
A Dual-Polarized 39 GHz 4x4 Microstrip Antenna Array for 5G MU-MIMO Airflight Cabin Connectivity
PublicationThis paper presents the design, fabrication, and experimental validation of a 39 GHz dual-polarized 4x4 microstrip antenna array. The array consists of 16 slot coupled circular microstrip patches, fed through SMPS connectors. The procedure requiring a reduced number of cables for measurement of the uniformly excited antenna array is also presented. The array exhibits 18 dBi peak gain and 2.9 GHz reflection bandwidth and is intended...
-
Hybrid Method Analysis of Unshielded Guiding Structures
PublicationA combination of mode matching, finite element methods and generalized impedance matrix is presented in a context of propagation problems for open guiding structures. The computational domain is divided into two regions: the first one is a circular cylinder containing whole guiding structure and the second one surrounds this artificial cylinder. The impedance matrix is calculated with the use of finite element method in the first...
-
Entrepreneurship Today: Selected Aspects
PublicationAt its very beginning, entrepreneurship was a purely economic notion. However, this growing interest in entrepreneurship-related problems prompted other sciences to participate in explaining the entrepreneurship phenomenon. Nowadays, entrepreneurship is analyzed through multiple theoretical lenses of economics, management, psychology, sociology – just to name a few. Therefore, it would be difficult to find a notion that could be...
-
КОНЦЕПТУАЛІЗАЦІЯ ПОНЯТТЯ ІНСТИТУТ РИНКУ СТРАХОВИХ ПОСЛУГ НА ОСНОВІ НЕОКЛАСИЧНОЇ ЕКОНОМІКИ
Publication -
Left-behind places in central and eastern Europe—labour productivity aspect
Publication -
Global Trends 2024-25
e-Learning CoursesThe course will discuss the main trands of the global economy in the 21st century. It will focus on the most relevant dynamics of the world econoy considering both the most important countries (USA, EU, China, Russia, etc.) and the key economic actors, the big firms as well as the multinationals. Tis approach should permit to consider different points of vew, including the world of workers in the advanced economies as well as in...
-
Implementation of spatial/polarization diversity for improved-performance circularly polarized multiple-input-multiple-output ultra-wideband antenna
PublicationIn this paper, spatial and polarization diversities are simultaneously implemented in an ultra-wideband (UWB) multiple-input-multiple-output (MIMO) antenna to reduce the correlation between the parallel-placed radiators. The keystone of the antenna is systematically modified coplanar ground planes that enable excitation of circular polarization (CP). To realize one sense of circular polarization as well as ultra-wideband operation,...
-
Composite GFRP U-shaped footbridge
PublicationThe paper presents proposals for the use of glass fiber reinforced polymer composites for the construction of engineering objects, known and commonly used in the shipbuilding industry. An example of a pedestrian footbridge was used in this case, which, despite the considerable thickness of the structural material, was made using infusion technology in one production cycle. The designed and produced footbridge span is durable, dynamically...
-
Pyrolysis Combined with the Dry Reforming of Waste Plastics as a Potential Method for Resource Recovery—A Review of Process Parameters and Catalysts
Publication: Emissions of greenhouse gases and growing amounts of waste plastic are serious environmental threats that need urgent attention. The current methods dedicated to waste plastic recycling are still insufficient and it is necessary to search for new technologies for waste plastic management. The pyrolysis-catalytic dry reforming (PCDR) of waste plastic is a promising pro-environmental way employed for the reduction of both CO2 and...
-
ASSESSMENT OF VOLATILE ORGANIC COMPOUNDS EMISSIONS FROM RECYCLED LOW-DENSITY POLYETHYLENE STREAMS
PublicationThe recycling of plastics is currently one of the most significant industrial challenges. Due to the enormous amounts of plastic wastes generated by various industry branches, it is essential to look for the potential methods of their utilization. Nevertheless, it should not be forgotten that recycled plastics are not pure materials, and they still may show an unfavorable environmental impact. They may contain different contaminants...
-
Tax Policy Tools of Selected European Countries as a Mechanism for Counteracting the Effects of the Crisis Caused by the COVID-19 Disease Pandemic
PublicationCrises play an important role in a economics life. They are common and it is impossible to omit them. This following study investigates the concept of ‘crisis’ in the context of economic situation. This text describes the most important financial crises that took place in the past. After that authors passes on a detailed analysis of the actual corona-crisis and the way that it affects the economy globally. The main goal of this...
-
Koncepcja doskonalenia marketingu nowych technologii w Politechnice Gdańskiej
PublicationW rozdziale podjęto problem doskonalenia wykorzystania dorobku współczesnego marketingu w przygotowaniu i oferowaniu nowych technologii, oparte na doświadczeniach Politechniki Gdańskiej (PG). Omówiono pojęcia, cechy, korzyści i uwarunkowania współczesnego marketingu, jak też istoty nowych technologii i sposobów transferu z jednostek naukowo-badawczych do gospodarki. Przedstawiono dotychczasowe doświadczenia transferu i komercjalizacji...
-
Wpływ zbrojenia polimerowymi włóknami rozproszonymi na wybrane właściwości mieszanek mineralno-asfaltowych
PublicationW artykule przedstawiono wybrane wyniki badań mieszanek mineralno-asfaltowych zbrojonych polimerowymi włóknami rozproszonymi. Ocenie poddano mieszankę włókien zbrojących aramidowo-poliolifenowych pod kątem wpływu ich zastosowania na właściwości niskotemperaturowe i odporności na deformacje trwałe mieszanek mineralno-asfaltowych. Właściwości niskotemperaturowe oceniano na podstawie testu zginania próbek belkowych oraz na podstawie...
-
Modelling of joining route segments of differential curvature
PublicationThe paper presents a new general method of modelling route segments curvature using differential equations. The method enables joining of route segments of different curvature. Transitional curves of linear and nonlinear curvatures have been identified in the case of joining two circular arcs by S-shaped and C-oval transitions. The obtained S-shaped curves have been compared to the cubic C-Bezier curves and to the Pythagorean hodograph...
-
Transformation of the Odesa Waterfront
PublicationOdesa is a unique city: it is the third-largest city in Ukraine and the second in the Black sea region. During its short but eventful history, it gathered a variety of cultural layers within its boundaries, what had reflected in its architecture, urban life, and unique accent of its inhabitants. The city`s waterfront is considered to be the Pearl of the Black Sea. Starting with the receiving of the Porto Franco status in 1819,...
-
Driving forces of informal employment: An empirical study based on Polish enterprise data
PublicationObjective: The article aims to indicate the determinants of informal employment in registered enterprises using company-level evidence from Poland. Research Design & Methods: The survey conducted among Polish small and medium-sized (SME) enterprises in 2018 was used to find the driving forces of informal employment in Poland. The adequate sample comprised 952 representative surveys derived from the computer-assisted telephone...
-
Ukrainian Market of Electrical Energy: Reforming, Financing, Innovative Investment, Efficiency Analysis, and Audit
PublicationThe aim of this research is to determine the influence of electrical energy market regulation reform in Ukraine on the competitive environment, the reproduction processes of financial and innovative support, and the energy efficiency of the national economy. The authors have put forward and verified the hypothesis that, under conditions of institutional maturity of the Ukrainian electrical energy market, its liberalization and...
-
Hidden Champions of Poland
PublicationPoland is a country with a strong entrepreneurial spirit. The hidden champions’ performance has been closely related to political and economic changes: the fall of communism in 1989 and the transition from a centrally planned economy to a market economy. This led to the emergence of small private businesses focused on the domestic market. The accession to the European Union in 2004 created new perspectives for the hidden champions’...
-
The topography of Bi2VO5.5 ceramics prepared by melt-quenching technique was measured with confocal microscope
Open Research DataThe topography of Bi2VO5.5 ceramics prepared by melt-quenching technique was measured by confocal microscope.
-
The structure of lead-borate glasses containing nanocrystallites of iron oxides
Open Research DataThe structure of iron-doped glasses and glass-ceramics were studied. Glass samples of composition of xFe2O3–(100 − x)(B2O3–2PbO) (2.5 b x b 37, in mol%) were prepared by the conventional melt quenching technique. The melting was conducted in alumina crucibles at the temperature of 1523 K. The melts were poured on a preheated (573 K) brass plate and...
-
Linear impedance of strontium–borate glass measured with impedance spectroscopy method at low temperature region
Open Research DataThe linear electrcial properties of strontium–borate glass was measured by impedance spectroscopy method.
-
Linear impedance of Bi2VO5.5 glass-ceramic annealed at 423 K measured with impedance spectroscopy method at low temperature region
Open Research DataThe linear electrical properties of Bi2VO5.5 glass-ceramic annealed at 423 K prepared by traditional melt quenching technique was measured by impedance spectroscopy method.
-
Una egemonia instabile
Publicationil ruolo degli Stati Uniti nell'economia globale e la sfida giapponese e cinese
-
The Influence of Cement Type on Early Properties of Cold In-Place Recycled Mixtures
PublicationCold in-place recycling is a commonly used maintenance treatment in rehabilitation of low and medium volume roads in Poland. Typically, two types of binding agents are used—cement and bituminous emulsion (or foamed bitumen).Due to the harsh Polish climate with many freeze/thaw cycles and frequent occurrence of saturated conditions, the used amounts of cement are higher than those commonly used in warmer parts of Europe. While there...
-
Modelling fatalities on regional road networks
PublicationDuring the last decade Poland’s road fatalities went down by 44%. The trend differs from region to region. Effective road safetymanagement in regions requires tools for forecasting road safety measures and identifying factors influencing road fatality numbers. Mathematical models can provide such tools. They take into account local characteristics such as: demography, economy, infrastructure and motorization. Such models could...
-
Adam Wronkowski dr inż.
PeopleDoctor of social sciences in the discipline of socio-economic geography and spatial economy. Assistant Professor at the Faculty of Social and Economic Geography and Spatial Management at Adam Mickiewicz University in Poznań. He belongs to the Department of Spatial Economy and Urban Design. My research interests include geographies of children and young people, including, in particular, independent mobility, agency and the interrelationship...
-
Imaging of Increasing Damage in Steel Plates Using Lamb Waves and Ultrasound Computed Tomography
PublicationThis paper concerns inspection of steel plates, with particular emphasis on the assessment of in-creasing damage. Non-destructive tests were performed on four plates, one of which was un-damaged, while the remaining three had a defects in the form of circular holes with a diameter of 2, 5, and 10 cm. Guided Lamb waves were used in the research, and the image reconstruction was performed using ultrasound computed tomography. The...
-
The application of nonlinear curvature sections in the turnout diverging track
PublicationThe paper presents the analytical method of modelling the diverging track of railway turnout with nonlinear curvature sections. These sections were used for smoothing the graph of curvature in the extreme areas of turnout. The problem of the curvature distribution was identified with the use of differential equations. The resulting solutions are of universal nature for example the ability of assuming any values of curvature at...
-
Pumps, Turbines and Small Hydropower, LEC/LAB, DaPE, sem.5 winter 2022/23 (M:320403W0)
e-Learning CoursesThe aim of the course is to identify and demonstrate knowledge of the major concepts, theoretical perspectives, and historical trends in small hydropower. This course examines the principles of sustainability and renewable energy conversion with emphasis on hydro energy resources. Concentration is placed on the relationships between the renewable resources, conversion technology and economic feasibility along with consideration...
-
Pumps, Turbines and Small Hydropower, LEC/LAB, ET, sem.7 winter 2022/23 (PG_00042108)
e-Learning CoursesThe aim of the course is to identify and demonstrate knowledge of the major concepts, theoretical perspectives, and historical trends in small hydropower. This course examines the principles of sustainability and renewable energy conversion with emphasis on hydro energy resources. Concentration is placed on the relationships between the renewable resources, conversion technology and economic feasibility along with consideration...
-
Pumps, Turbines and Small Hydropower, LEC/LAB, DaPE, sem.5 winter 2023/24 (M:320403W0)
e-Learning CoursesThe aim of the course is to identify and demonstrate knowledge of the major concepts, theoretical perspectives, and historical trends in small hydropower. This course examines the principles of sustainability and renewable energy conversion with emphasis on hydro energy resources. Concentration is placed on the relationships between the renewable resources, conversion technology and economic feasibility along with consideration...
-
Pumps, Turbines and Small Hydropower, LEC/LAB, ET, sem.7 winter 2023/24 (PG_00042108)
e-Learning CoursesThe aim of the course is to identify and demonstrate knowledge of the major concepts, theoretical perspectives, and historical trends in small hydropower. This course examines the principles of sustainability and renewable energy conversion with emphasis on hydro energy resources. Concentration is placed on the relationships between the renewable resources, conversion technology and economic feasibility along with consideration...
-
Struktura źródeł finansowania ponadprzeciętnie rentownych przedsiębiorstw z sektora MSP
PublicationCelem artykułu jest przedstawienie w przekroju sektorowym kształtowania struktury finansowania przez MSP uzyskujące ponadprzeciętnie wysoką rentowność aktywów. W trakcie przeprowadzonych badań uwzględniono 109 174 sprawozdań finansowych przedsiębiorstw prowadzących działalność gospodarczą w 27 różnych działach gospodarki narodowej. Sektorowe zróżnicowanie wartości wskaźników struktury źródeł finansowania zostało potwierdzone przy...
-
Wartości rekomendowane wskaźników sprawności działania dla przedsiębiorstw z sektora MSP
PublicationNiniejszy artykuł poświęcony jest zagadnieniu sprawności działania małych i średnich przedsiębiorstw. W trakcie przeprowadzonych badań wykorzystano 34 820 sprawozdania finansowe przedsiębiorstw. Dla potwierdzenia zróżnicowania sprawności działania w zależności od przynależności sektorowej przedsiębiorstwa wykorzystano test nieparametryczny Kruskala – Wallisa. Zawarte w artykule wyniki badań dowodzą, że MSP należące do różnych działów...
-
Method of managing drill cuttings from shale gas formations
PublicationProposed management method of drill cuttings involves recycling for the expanded clay production. A theoretical presentation of the possibility, choosing planning path based on similarity between the materials used in the manufacture of expanded clay and oily cuttings. Application for the main stages of manufacture of expanded clay production of drill cuttings from shale gas extraction. Introduced into circulation solid waste partly...
-
Effect of strain level on the stiffness of cold recycled bituminous mixtures
PublicationCold recycling is a sustainable technology for the rehabilitation of bitumi-nous pavements. This study investigates the stiffness response of cement-bitumen treated materials (CBTM)manufactured with 80% reclaimed asphalt and treated with 2.0% Portland cement and 4.0% bitumen emulsion. Indirect tensile stiffness modulus tests were carried out to assess the strain dependence of stiffness at target horizontal deformation levels between...
-
iPP/HDPE blends compatibilized by a polyester: An unconventional concept to valuable products
PublicationPolyolefins are the most widely used plastics accounting for a large fraction of the polymer waste stream. Although reusing polyolefins seems to be a logical choice, their recycling level remains disappointingly low. This is mainly due to the lack of large-scale availability of efficient and inexpensive compatibilizers for mixed polyolefin waste, typically consisting of high-density polyethylene (HDPE) and isotactic polypropylene...
-
Effect of Compounding Conditions on Static and Dynamic Mechanical Properties of High Density Polyethylene/Ground Tire Rubber Blends
PublicationSearching for new and cost-effective methods of waste rubber recycling is a subject of research in many scientific centers in the world. In this paper there are presented results of the research of the extrusion process of cheap and environmentally friendly thermoplastic compositions containing 50 % wt. of masses of ground tire rubber (GTR). The aim of this study was to determine the relationship between the mixing conditions and...
-
The Effect of Polyurethane Glycolysate on the Structure and Properties of Natural Rubber/Carbon Black Composites
PublicationIn this work the use of polyurethane chemical recycling product (i.e. glycolysis of polyurethane waste realized with the mass excess of polymer) as a plasticizer for natural rubber-based composites was proposed. The effect of plasticizer type (napthenic oil and polyurethane foam glycolysate) and amount (2, 4, 6 or 8 parts per 100 parts of natural rubber) on the processing properties of rubber mixtures and chemical structure, swelling,...
-
One-step recovery of REE oxalates in electro-leaching of spent NdFeB magnets
PublicationRecovery of rare-earth elements (REEs) from spent NdFeB magnets is receiving great attention because of high amount of neodymium and potential risk of environmental pollution. In this study, a novel environment-friendly hydrometallurgical route is proposed for efficient recovery of REEs during electrochemical leaching with sulfuric and oxalic acids. With proper adjustment of the electrolyte composition and operating conditions,...
-
Zastosowanie odcinków nieliniowej krzywizny w torze zwrotnym rozjazdu kolejowego
PublicationW pracy została przedstawiona analityczna metoda kształtowania toru zwrotnego rozjazdu kolejowego posiadającego na swojej długości odcinki nieliniowej krzywizny. Odcinki te służą łagodzeniu wykresu krzywizny w skrajnych strefach rozjazdu W omawianej metodzie dokonano identyfikacji problemu rozkładu krzywizny za pomocą równań różniczkowych. Uzyskane rozwiązania mają charakter uniwersalny; m. in. pozwalają na przyjmowanie dowolnych...
-
INCREASING POWER SUPPLY SAFETY IN THE ASPECT OF SUPPORTING THE RENEWABLE ENERGY SOURCES BY CONVENTIONAL AND VIRTUAL POWER STORES
PublicationThis paper presents characteristics and purposefulness of supporting the renewable energy sources (OZE) by means of energy stores. The main emphasis was placed on analysis of virtual energy stores available for implementation in Polish economy conditions. A role which management of Demand Side Response (DSR) may play in balancing Polish electric power system, is discussed. Implementation of such solutions together with conventional...
-
METHODOLOGICAL IDENTIFICATION OF OPPORTUNITIES FOR DEVELOPMENT OF SMART SPECIALISATION IN POMERANIAN VOIVODESHIP IN POLAND
PublicationThe subject of the presented research was projects co financed with European Union funds realised in years 2007–2013 in small towns of Pomeranian Voivodship. Projects which were included belong to 3 programmes: Innovative Economy Programme, Infrastructure and Environment Programme and Regional Operational Programme. The aim of the researches was study of the structure of projects according to its kind and town division. The other...
-
The Determinants of False Self-Employment: A Survey of Polish Enterprises
PublicationThe main goal of this article is to advance the emergent research on tax evasion in Poland in the form of false self-employment (FSE), in particular to identify its causes. The dependent character of some self-employed workers is a big problem in the Polish economy, which has been completely unexplored because of the lack of available data. In this article, we use data from a survey of Polish companies. Our empirical results show...
-
Coplanar Waveguide Fed Ultra-Wideband Antenna Over the Planar and Cylindrical Surfaces
PublicationThe investigation of coplanar waveguide fed ultra-wideband antenna and the influence of the proximity of different materials on the reflection coefficients and radiation character-istics is presented. The antenna is composed of two circular coplanar strips which enclose slot aperture of similar shape and is designed on a thin and flexible substrate. From the modeling and experimental tests the antenna shows good performance in...
-
A material model of asphalt mixtures based on Monte Carlo simulations
PublicationThe paper aims to numerically reflect mineral-asphalt mixture structure by a standard FEM software. Laboratory test results are presented due to bending tests of circular notched elements. The result scatter is relatively high. An attempt was made to form a random aggregate distribution in order to obtain various results corresponding to laboratory tests. The material structure calibration, its homogenization and finite element...
-
Małgorzata Gawrycka dr hab.
PeopleMałgorzata Gawrycka, a graduate of the Faculty of Management at the University of Gdańsk, PhD in economics. From 2012-2020, deputy dean for teaching at the Faculty of Management and Economics of the Gdańsk University of Technology. Currently Dean of the Faculty. Scientific interests focus on issues related to the macroeconomic policy of the state. In particular, the problems of the situation on the labour market, demographic changes,...