displaying 1000 best results Help
Search results for: DESI
-
Computationally Efficient Design Optimization of Compact Microwave and Antenna Structures
PublicationMiniaturization is one of the important concerns of contemporary wireless communication systems, especially regarding their passive microwave components, such as filters, couplers, power dividers, etc., as well as antennas. It is also very challenging, because adequate performance evaluation of such components requires full-wave electromagnetic (EM) simulation, which is computationally expensive. Although high-fidelity EM analysis...
-
Arch footbridge over Warta river in Wronki - design and construction
PublicationThe paper presents the concept of dynamic redesign of lively footbridge. The goal was to reduce probable dynamic excitation and change detailed structural concept. After the complex study the new design was created. In effect completely new static and dynamic properties were reached. Static and dynamic assumptions are explainde. General information, photos and drawings are presented. The final price of the project amounted to 1.25...
-
Practical aspects of design and operation of amphibious craft for rescue purposes
PublicationThe paper presents the selected problems of design and operation of amphibious craft for rescue purposes. The result of research on the amphibious rescue units allowed formulating the general conclusions with respect to the proper selection of the main design parameters, program of model tests and full scale trials for the amphibious craft. The most important design problems related to the water characteristics are presents and...
-
Control System Design for Dynamic Positioning using Vectorial Backstepping
PublicationThe problem of synthesis a dynamic positioning system for low frequency model of surface vessel was considered in this paper. The recursive vectorial backstepping control design was used to keep a fixed position and heading in presence of wave disturbances. The passive observer was introduced to smooth the measurements and to estimate the velocities needed for the control algorithm. The computer simulation results were given to...
-
Variable Fractional Delay Filter Design Using a Symmetric Window
PublicationIn this paper a numerically efficient method for designing a nearly optimal variable fractional delay (VFD) filter based on a simple and well-known window method is presented. In the proposed method a single window extracted from the optimal filter with fixed fractional delay (FD) is divided into even and odd part. Subsequently, the odd part is discarded and symmetric even part of the extracted window is used to design a family...
-
AN INTELLIGENT SYSTEM TO SUPPORT THE DESIGN PROCESS OF HYBRID PHOTOVOLTAIC INSTALLATIONS
PublicationThe paper presents the final version of intelligent system to support the design process of hybrid photovoltaic systems supported by fuel cells and / or thermoelectric generators developed and constructed at the Institute of Electron Technology, as well as to conduct experiments and research. A block diagram of the system and the selection of its components is described and discussed. The paper considers the availability of the...
-
Cost-Efficient Design Methodology for Compact Rat-Race Couplers
PublicationIn this article, a reliable and low-cost design methodology for simulation-driven optimization of miniaturized rat-race couplers (RRCs) is presented. We exploit a two-stage design approach, where a composite structure (a basic building block of the RRC structure) is first optimized using a pattern search algorithm, and, subsequently, the entire coupler is tuned by means of surrogate-based optimization (SBO) procedure. SBO is executed...
-
Modele projektowania usug oparte na koncepcji design-thinking
PublicationW niniejszym rozdziale zaprezentowano podstawowe aspekty planowania usług z wykorzystaniem koncepcji design - thinking. Autorzy omówili kluczowe modele w odniesieniu do których przedstawiono także po jednej interpretacji. Rozważania na temat przytoczonych modeli umozliwiły przeprowadzenie ich analizy porównawczej z uwzglednieiem podstawowych faz projektowania, róznic i podobieństw, jak też specyfiki wykorzystania w okreslonych...
-
Influence of sensor design and optical properties of tissue on the photoplethysmographic signal
PublicationPhotopletysmography and an associated technique called pulse oximetry are still explored due to the expectations that they give a lot of information about the state of the patient and, also, due to the fact that they are non invasive. Knowledge about the impact of various parameters on the measured signal leads to a faster and a more reliable way of analyzing measurement results and finding the dependencies between the involved...
-
Multi-objective antenna design by means of sequential domain patching
PublicationA simple yet robust methodology for rapid multiobjective design optimization of antenna structures has been presented. The key component of our approach is sequential domain patching of the design space which is a stencil-based search that aims at creating a path that connects the extreme Pareto-optimal designs, obtained by means of single-objective optimization runs. The patching process yields the initial approximation of the...
-
Application of design-thinking models to improve the quality of tourism services
PublicationThe paper presents basic aspects of improvement activities for the quality of tourism industry service through its specific determinants of quality. The authors suggested an the application of design-thinking concept in the development of the service itself and an attempt to undertake improvement activities.
-
On the low-cost design of abbreviated multisection planar matching transformer
PublicationA numerically demanding wideband matching transformer composed of three nonuniform transmission lines (NUTLs) has been designed and optimized at a low computational cost. The computational feasibility of the design has been acquired through the exploitation of low-fidelity NUTL models in most steps of the design procedure and an implicit space mapping optimization engine, providing high accuracy results with only a handful of EM...
-
Descriptive geometry tasks with computer aided design for geodesy and cartography
PublicationZasady rzutowania topograficznego i środkowego stanowią teoretyczną podstawę dla kluczowych przedmiotów zawodowych na kierunku Geodezja i Kartografia, dlatego dobór zarówno treści nauczania jak i konkretnych zadań ćwiczeniowo-projektowych w ramach geometrii wykreślnej jest szczególnie istotny. W artykule na przykładzie tematów zadań rysunkowych omówiono zakres tematyczny z perspektywy dla danego kierunku studiów oraz sposoby jego...
-
Fast clutter cancellation for noise radars via waveform design
PublicationCanceling clutter is an important, but very expensive part of signal processing in noise radars. It is shown that considerable improvements can be made to a simple least squares canceler if minor constraints are imposed onto noise waveform. Using a combination of FPGA and CPU, the proposed scheme is capable of canceling both stationary clutter and moving targets in real-time, even for high sampling rates.
-
A robust design of a numerically demanding compact rat-race coupler
PublicationA fast and accurate design procedure of a computationally expensive microwave circuit has been presented step-by-step and experimentally validated on the basis of a compact rat-race coupler (RRC) comprising slow-wave resonant structures (SWRSs). The final compact RRC solution has been obtained by means of a sequential optimization scheme exploiting the implicit space mapping (ISM) algorithm. A well-suited surrogate optimization...
-
Design and numerical testing of 5-box gfrp shell footbridge
PublicationThe paper formulates new design conditions for composite footbridges, taking into account the material and structural specificity of these objects, i.e. the strength condition, the serviceability condition and the frequency condition. A GFRP composite footbridge labelled with CFB2 code has been designed, with the original superstructure in the form of an opened-closed 5-box girder. The foot and cycle track bridge is simply supported,...
-
THERMAL ANALYSIS AND DESIGN OF HYBRID MICROCHANNEL-MICROJET TEST PROBE
PublicationThe paper presents the numerical investigation of a microjet- microchannel cooling module. In which microjets of water are impinging into the microchannels and forming a liquid film on the impingement surface. Applied technology takes benefits from two very attractive heat removal techniques. When lminar jets are impinging on the surface have a very high kinetic energy at the stagnation point, also in microchannels boundary layer...
-
THERMAL ANALYSIS AND DESIGN OF HYBRID MICROCHANNEL -MICROJET TEST PROBE
PublicationAccurate control of cooling parameters is required in ever wider range of technical applications. It is known that reducing the flow hydraulic diameter to an increase in the economy of cooling and improves its quality (Mikielewicz and Muszyński 2009). Present study describes research results related to the design and construction of the test stand for hybrid microjet- microchannel cooling modules study, which may be applied in...
-
A Concept and Design Optimization of Compact Planar UWB Monopole Antenna
PublicationA novel structure concept of a compact UWB monopole antenna is introduced together with a low-cost design optimization procedure. Reduced footprint is achieved by introduction of a protruded ground plane for current path increase and a matching transformer to ensure wideband impedance matching. All geometrical parameters of the structure are optimized simultaneously by means of surrogate based optimization involving variable-fidelity...
-
Towards Experience-Based Smart Product Design for Industry 4.0
PublicationThis paper presents the concept of smart virtual product development (SVPD) system capable of supporting industrial product development process. It enhances the decision making process during different stages and activities involved in product development i.e. product design, manufacturing, and its inspection planning. The enhancement is achieved by using the explicit knowledge of formal past decision events, which are captured,...
-
Experience based decisional DNA to support smart product design
PublicationThis paper presents the idea of Smart Virtual Product Development (SVPD) system to support product design. The foundations of the system are based upon smart knowledge management techniques called Set of Experience Knowledge Structure (SOEKS) and Decisional DNA (DDNA). It enhances the industrial product development process by using the previous experiential knowledge gathered from the formal decisional activities. This experiential...
-
An Automatic Self-Tuning Control System Design for an Inverted Pendulum
PublicationA control problem of an inverted pendulum in the presence of parametric uncertainty has been investigated in this paper. In particular, synthesis and implementation of an automatic self-tuning regulator for a real inverted pendulum have been given. The main cores of the control system are a swing-up control method and a stabilisation regulator. The first one is based on the energy of an inverted pendulum, whereas the second one...
-
Knowledge Management Challenges in Collaborative Design of a Virtual Call Centre
PublicationThis paper presents the analysis of knowledge management issues for an user interface consulting project relevant during the development of a Virtual Call Centre. Experiences gathered by the team of designers and team of usability consultants have been described and evaluated from the knowledge management viewpoint. A concept of a knowledge-based system, potentially supporting usability consulting in subsequent IT projects has...
-
Chitosan, Collagen and Gelatin in the design of novel materials with antimicrobial acticity
PublicationMedical devices containing and releasing antiinfective agents directly on the site of injury are a common group of materials available and widely used in treating difficult to heal wounds. Sustained contact of the active agent to the damaged tissue, needed to inhibit infection and preservation of microbiological purity of the wound, is provided by the immobilization antimicrobial agents on the surface of the matrix material or...
-
A nearly optimal fractional delay filter design with asymmetric window
PublicationW pracy przedstawiono wyniki badań nad zastosowaniem asymetrycznego okna wyodrębnionego zawczasu z filtru optymalnego. Pokazano, że takie podejście przy zastosowaniu dodatkowej korekcji wzmocnienia filtru zależnej od opóźnienia filtru pozwala na projektowanie filtrów prawie optymalnych. W efekcie zaproponowana metoda łączy prostotę metody okien z jakością porównywalną do jakości filtrów optymalnych. Efektywność zaprezentowanej...
-
The design of an intelligent medical space supporting automated patient interviewing
PublicationThe article presents the architecture and results of implementing an application for the intelligent medical space UbiDoDo (Ubiquitous Domestic Doctor's Office). The main purpose of the application is real-time monitoring of the biomedical parameters of a patient in his domestic environment. It allows an immediate reaction to appearing symptoms and provides means to automatically interview the patient and deliver his results to...
-
Simulation-driven design of compact ultra-wideband antenna structures
PublicationPurpose–The purpose of this paper is to investigate strategies and algorithms for expedited designoptimization and explicit size reduction of compact ultra-wideband (UWB) antennas.Design/methodology/approach–Formulation of the compact antenna design problem aiming atexplicit size reduction while maintaining acceptable electrical performance is presented. Algorithmicframeworks are described suitable for handling various design situations...
-
RANS-based design optimization of dual-rotor wind turbines
PublicationPurpose An improvement in the energy efficiency of wind turbines can be achieved using dual rotors. Because of complex flow physics, the design of dual-rotor wind turbines (DRWTs) requires repetitive evaluations of computationally expensive partial differential equation (PDE) simulation models. Approaches for solving design optimization of DRWTs constrained by PDE simulations are investigated. The purpose of this study is to determine...
-
Design of a continuous intra-oral distraction device for mandibular bone
PublicationIn this paper we present example of a specific device used for distraction osteogenesis. Distraction osteogenesis (also called callus distraction, collotasis or osteodistraction) is a surgical process for reconstructing bone deformities or lengthening bones.
-
UAV Design and Construction for Real Time Photogrammetry and Visual Navigation
PublicationA unmanned aerial vehicles applications in photogrammetry have increased rapidly last years. A fast data gathering and processing in real time in some cases become crucial and desired in some application. In the paper, a real time solution is proposed. A real time photogrammetry from UAV is proposed, where image data are gathered and processed on board UAV and finally reconstructed 3D model and measurements are delivered. The paper...
-
Challenges associated with the design of a small unmanned autonomous maritime vehicle
PublicationThe paper contains the preliminary results of the research connected with development of a small unmanned autonomous maritime vehicle. First of all a general description of research is introduced. Next, a concept of a vehicle is presented. Then, a brief description of a research method is given. Next, the current research problems under way are introduced. They concern the ballasting, motion and precise position stabilization system...
-
Elastic Fender-Dolphin Interaction for Economic Design of Berthing Dolphins
PublicationThe study addresses the question of the possible design benefits when considering the interaction between a modern marine modular rubber fender and a steel tubular pile substructure of a berthing dolphin. Absorption of the berthing kinetic energy of the vessel by a dualelasticity pile-fender berthing system is described in detail using the interactive treatment method (ITM). Application of the ITM is illustrated by a calculative...
-
Application of Reverse Engineering Technology in Part Design for Shipbuilding Industry
PublicationIn the shipbuilding industry, it is difficult to create CAD models of existing or prototype parts, especially with many freeform surfaces. The paper presents the creation of the CAD 3D model of a shipbuilding component with the application of the reverse engineering technology. Based on the data obtained from the digitization process, the component is reconstructed in point cloud processing programs and the CAD model is created....
-
Design and material selection for a patient transport device in field hospitals
PublicationACKGROUND: A major cause of patient and hospital worker injuries occurs transferring patients between two planes. The main aim of this paper was to propose a design of patient’s lift and transfer apparatus for use in field hospitals. The assumption was to design lightweight, durable and ergonomic device using innovative material. The authors concentrated on partial elimination of manual lifting in order to device could work both...
-
Importance of model tests in design and operation of watercraft for example CTO
PublicationShip Hydromechanics Division is a specialized research and development department of Ship Design and Research Centre conducting tests and research in the field of hydromechanics, connected with design and operation of ships and other floating structures, in scope of: predictions, numerical analyses, designs of - hull shape optimized with respect to the ship’s functions with the application of modern design tools, screw propellers...
-
Co-operation with local stakeholders: a crucial element of urban design
PublicationIn this article,the authors endeavour to illustratethe evolution of the role of local stakeholder in teaching urban planning by example of selected experiences in the Faculty of Architecture atGdańsk University of Technology(FA-GUT), Gdańsk, Poland. The timeframe covers the period from the political breakthrough in 1989 to the present. The background is composed of the social, economic and legal changes that have...
-
MULTI-CRITERIA MODEL IN MULTIFUNCTIONAL BUILDING SYSTEM DESIGN PROCESS
PublicationThe paper presents a multi-criteria approach in multifunctional building system design process. The aim is to develop a theory relative to the engineering system of multifunctional with a mathematical representation defined by a holistic network for the lifecycle of the designed object. The idea of work was to define the structure of a complex system. Background for the presented field is to develop a design strategy for multifunctional...
-
Design Equation for Stirring Fluid by a Stream Pump in a Circulating Tank
PublicationA circulating tank is a very useful theoretical scheme for many fluid-flow objects in several branches of engineering. The motion of the fluid in such objects can be induced in different ways. A stream pump provides an especially interesting possibility; however, the quantitative description of such devices shows some shortcomings. Such a device is analogous to a jet pump, thus has similar advantages (simplicity of construction,...
-
Multi-objective design of miniaturized impedance transformers by domain segmentation
PublicationFast multi-objective design optimization of compact microstrip impedance transformers is discussed. Our approach exploits approximation models constructed using sampled coarse- mesh EM simulation data in a partitioned design space and response correction techniques for design refinement. Demonstra
-
Structural Design and Sensitivity Analysis of Semi-Rigid Pavement of a Motorway
PublicationThis paper presents application of mechanistic-empirical methods in design of semi-rigid pavement for a section of a motorway in Poland. The stage construction was assumed. Three fatigue criteria were applied in the design. For asphalt fatigue cracking and subgrade soil the criteria from the Asphalt Institute (1981) were applied. For fatigue cracking of cement stabilized bases the Dempsey (1984) and De Beer (1992) criteria were...
-
Design of novel microstrip directional coupler for differential signal decoupling
PublicationThis study describes a concept of a novel microstrip directional coupler for differential signal decoupling, which can be used to digital signal overhearing on printed-circuit-boards. The complete design method is proposed with rules given analytically. Considered methodology is suitable for synthesis of couplers with low coupling factors, which have negligible influence on the transmission in main line. Theoretical considerations...
-
Structural design and sensitivity analysis of semi-rigid pavement of a motorway
PublicationThis paper presents application of mechanistic-empirical methods in design of semi-rigid pavement for a section of a motorway in Poland. The stage construction was assumed. Three fatigue criteria were applied in the design. For asphalt fatigue cracking and subgrade soil the criteria from the Asphalt Institute (USA) were applied. For fatigue cracking of cement stabilized bases the Dempsey (USA) and De Beer (South Africa) criteria...
-
Multidisciplinary approach to the component design of a new axial hydraulic pump
PublicationArtykuł przedstawia rezultaty analizy przebiegów zmian ciśnienia w komorze cylindrowej pompy typu PWK o zmiennej wydajności. Ze względu na skomplikowane zjawiska i wzajemne interakcje między nimi zbudowano model pozwalający na połączenie analizy MES i CFD. Uzyskane wyniki porównano z wynikami eksperymentu.
-
Influence of design of hydraulic components on their operation in low ambient temperatures
PublicationW artykule przestawiono wpływ konstrukcji zespołów hydraulicznych na ich działanie w niskich temperaturach otoczenia.
-
Towards the Development of a Risk Model for Unmanned Vessels Design and Operations
PublicationAn unmanned merchant vessel seems to be escaping from the stage of idea exploration. Once the concept proofs its safety, it may become a part of maritime reality. Although the safety aspect of such a ship has been addressed by a handful of scholars, the problem remains open. This is mainly due to lack of knowledge regarding actual operational circumstances and design of unmanned ships, which are yet to be developed. In the...
-
Digitalization of High Speed Craft Design and Operation Challenges and Opportunities
PublicationIn recent years, global demands for safe and sustainable ships led to dramatic changes in the maritime industry. Digitalization is expected to play an important part in the future. This is supported by analysis of the autonomous ships market which shows that digitalization of large ship types such as tankers and container ships is well on track. Although to date designs of autonomous High-Speed Craft (HSC) have been developed,...
-
Design of three control algorithms for an averaging tank with variable filing
PublicationAn averaging tank with variable filling is a nonlinear multidimensional system and can thus be considered a complex control sys-tem. General control objectives of such object include ensuring stability, zero steady state error and achieving simultaneously shortest possible settling time and minimal overshoot. The main purpose of this research work was the modelling and synthesis of three control systems for an averaging tank. In...
-
Architecture Design of a Networked Music Performance Platform for a Chamber Choir
PublicationThis paper describes an architecture design process for Networked Music Performance (NMP) platform for medium-sized conducted music ensembles, based on remote rehearsals of Academic Choir of Gdańsk University of Technology. The issues of real-time remote communication, in-person music performance, and NMP are described. Three iterative steps defining and extending the architecture of the NMP platform with additional features to...
-
The methodology of design of satellite working mechanism of positive displacement machine
PublicationIn this paper is described a methodology of design of satellite mechanism consisting of two noncircular gears (externally toothed rotor and internally toothed curvature) and circular gears (satellites). In the presented methodology is assumed that the rotor pitch line is known, and the curvature pitch line is necessary to designate. The presented methodology applies to mechanisms for which the number of the curvature humps is at...
-
Design, synthesis, and biological evaluation of tetrahydroquinolinones and tetrahydroquinolines with anticancer activity
PublicationColorectal cancer (CRC) is the most commonly diagnosed cancer in Europe and the United States and the second leading cause of cancer related mortality. A therapeutic strategy used for the treatment of CRC involves targeting the intracellular levels of reactive oxygen species (ROS). In this study, we synthesized a series of novel tetrahydroquinolinones and assessed their ability to inhibit CRC growth and proliferation by evoking...