Search
Search results for: cell cycle
-
SELECTED COMBINED POWER SYSTEMS CONSISTED OF SELFIGNITION ENGINE AND STEAM TURBINE
PublicationThis paper presents optimization of selected combined diesel engine-steam turbine systems. Two systems: the system combined with waste heat one-pressure boiler only and its version containing additionally low-pressure boiler proper feeding degasifier and the system of two-pressure cycle, were taken into considerations. Their surplus values of power output and efficiency associated with utilization of waste heat contained in piston...
-
Quasi-discrete modelling of PMSM phase currents in drives with low switching-to-fundamental frequency ratio
PublicationThis study proposes a new quasi-discrete approach to modelling the permanent magnet synchronous motor (PMSM). The quasi-discrete modelling reflects the impact of continuous rotor movement, which takes place during a control cycle, on the shape of motor current waveforms. This provides much improvement in current modelling accuracy under inverter low switching-to-fundamental frequency operation. The proposed approach may be used...
-
Optimising Sequencing Batch Reactor Operation Cycle Planning Using Evolutionary Algorithm
PublicationThe objective of this research was to optimise the operation cycle of the Sequencing Batch Reactor (SBR). Appropriate time balances of aerobic to anaerobic phases, as well as a set dissolved oxygen level are the key to ensuring the quality of effluent from the wastewater treatment process. The proposal to solve this optimisation problem was based on multi-objective optimisation using an evolutionary multi-objective optimisation...
-
Diagnosis of marine internal combustion engines by means of rapidly variable temperature and composition of exhaust gas as an alternative or support for currently used diagnostic methods
PublicationThe article points out relevance of parametric diagnostics of ship engines and analyzes the state of research in this field. A method is proposed for diagnosing engine systems on the basis of rapidly variable exhaust temperature while measuring its composition. A method for determining diagnoser tools from the signal within one engine cycle and mathematical and statistical treatment of test results is presented. The products of...
-
Analiza cyklu życia
PublicationAnaliza cyklu życia (LCA, ang. Life Cycle Analysis) z założenia obejmuje podejście „od kołyski aż po grób” w ocenie procesów przemysłowych i produktów. Ta wizja zaczyna się już w momencie wydobycia surowców pierwotnych w celu przetworzenia i wytworzenia produktu, a kończy, gdy wszystkie materiały zostają poddane utylizacji, recyklingowi lub składowaniu. LCA ocenia wszystkie etapy życia produktu z założeniem, że są od siebie współzależne,...
-
Knowledge-based functional safety management using ProSIL software
PublicationIn the article the ProSIL software for computer aided functional safety management is presented. The software consists of three modules for the determination of the required SIL level (ProSILen) and verification of the SIL level (ProSILver). In the ProSIL the calibrated knowledge-based risk graph method for determining the required safety integrity level (SIL) of the safety functions identified in hazard analysis is implemented....
-
Experimental study of pressure rise at the evaporator of capillary pumped loop with acetone and water as working fluids
PublicationIn this work studied is the possibility of fluid pumping using capillary forces in the capillary pumped loop. Experimental and theoretical studies have been performed to understand the phenomena associated with heat transfer in porous structure of the evaporator. The capillary effect was studied during operation of two different capillary porous structures with two different working fluids, namely water and acetone. The results...
-
Preliminary design of the last stage of supercritical steam turbine and proposition of anti-erosion coating for blades surface
PublicationIn this article a preliminary design of the last stage of supercritical steam turbine has been presented. A computational model of supercritical thermal cycle has been created in order to determine steam parameters at the stage inlet and outlet. The model was based on the structure of German coal-fired power plant Datteln 4. Further steam-flow parame-ters and dimensions of stator and rotor blades have been calculated analytically....
-
The life cycle cost of a building from the point of view of environmental criteria of selecting the most beneficial offer in the area of competitive tendering
PublicationThe article analyses environmental and ecological criteria of selecting the most beneficial offer in the aspect of LCC. Construction works contracts and the potential method of defining the above criteria, among others, is pondered on (for example by the recommendation of a material, which is supposed to be used, a ban on substances that are harmful for human health as well for the environment). In the relation to the above, it...
-
Life after BEXUS: Stratospheric Balloon Activities at Gdańsk University of Technology
PublicationHow do you restart an academic stratospheric balloon programme after taking part in the REXUS/BEXUS programme? How to assemble a new team and share the passion for stratosphere with a new generation of students? In this paper we want to summarise the stratospheric balloon activities at Gdańsk University of Technology held by SimLE Science Club since 2022. We’ll outline the challenges of creating a new team as well as the technical...
-
Fashion and Tourism: Parallel Stories of Two "Dream Marvels".
PublicationFashion and tourism are two social, cultural, and economic phenomena that have both numerous connections and surprising similarities. These are not new: they have been built and developed since the beginnings of tourism as a modern social phenomenon, emerged in Europe in the context of the industrial revolution. They consolidated in the first decades of the 21st century, in a context where both phenomena have completed their “mass”...
-
Ocena techniczno-ekonomiczna stosowania pomp ciepła w systemach ogrzewania wolnostojących budynków mieszkalnych
PublicationW artykule przedstawiono ocene techniczno-ekonomiczną ogrzewania wolnostojącego budynku mieszkalnego, realizowanego w oparciu o dwa systemy. Analizę opłacalności przeprowadzono dla układów, których porównanie jest w wysokim stopniu adekwatne do rzeczywistych warunków ekonomicznych i technicznych. Ocenie poddano systemy c.o. i c.w.u. wykorzystujące sprężarkową pompę ciepła lub alternatywnie kocioł olejowy, przy założeniu, że parametry...
-
Improving Control Dynamics of PMSM Drive by Estimating Zero-Delay Current Value
PublicationDynamic performance of current control loop still remains crucial for position-, speed-, and torque-controlled drives. In the study, a current loop solution has been designed for field oriented control of permanent magnet synchronous motors (PMSM). It enhances typical PI controller with an estimator of zero-delay current (ZDC) value. The ZDC estimation allows for selecting substantially higher controller gain. It reduces control...
-
Electrochemical Characterization of Gelatine Derived Ceramics
PublicationNew materials obtained by pyrolysis of gelatine (G) and poly(1,2-dimethylsilazane) (PSN) (weight ratio: G/PSN 70/30) at temperatures 700 and 900 °C were characterized by SEM and Raman spectroscopy. The presence of ceramics influences on the cluster size of the materials. Electrochemical tests were performed by cyclic voltammetry and galvanostatic cyclic polarization. The capacity of G/PSN was 464 and 527 mAh/g for materials pyrolysed...
-
Evolutionary sets of safe ship trajectories with speed reduction manoeuvres within traffic separation schemes
PublicationIn the previous paper the author presented the evolutionary ship trajectory planning method designed to support Traffic Separation Schemes (TSS). This time the extensions of this method are described which allow to combine evolutionary trajectory planning with speed reduction manoeuvres. On TSS regions with higher than usual density of traffic and smaller distances between ships, the course alterations alone are not always sufficient...
-
AN ATTEMPT AT IDENTIFYING THE INFLUENCE OF TEST HEAD ASSEMBLY STIFFNESS ON THE RESULTS OF A TRIBOLOGICAL EXPERIMENT CONDUCTED UNDER MICRO-OSCILLATION CONDITIONS
PublicationThe outcome of experimental research on a group of dry bearing materials carried out under small oscillation conditi ons and using a test rig designed and made at Gdansk University of Technology inspired the decision to find out if the stiffness of test head elements in fluenced the generated results. Therefore, a computer model utilising finite elements was devised and used to simulate the workings of the test head. The mode l...
-
Logistics of Transnational Corporations as the Basis of Cooperation Between Ukraine and EU (for Poland Example)
PublicationThe article describes the scientific and theoretical basis for the organization of logistics management of modern international corporations, owning by assets in mining and metallurgical business in Ukraine and Poland; it had been analyzed the influence of transfer pricing mechanism as one of the main factors affecting on the efficiency of the organization of supply chain of resources (Ukrainian semi-finished goods) to ensure uninterrupted...
-
Poprawa sprawności układów ORC i systemów trigeneracyjnych poprzez zastosowanie różnych termodynamicznych wariantów ich działania
PublicationNadrzędnym celem w procesie projektowania instalacji opartej o układy ORC (Organic Rankine Cycle) i systemy trigeneracyjne jest uzyskanie możliwie najwyższej sprawności lub maksymalnej mocy układu. Jednak naturalną barierą wdrażania nowych, często kosztownych, technologii są przesłanki natury ekonomicznej. Niedoceniany również bywa w takich przypadkach efekt ekologiczny ewentualnej modernizacji. Niniejsza praca przedstawia systemowe...
-
Hat problem on the cycle C4
PublicationThe topic of our paper is the hat problem. In that problem, each of n people is randomly tted with a blue or red hat. Then everybody can try to guess simultanously his own hat color looking at the hat colors of the other people. The team wins if at least one person guesses his hat color correctly and no one guesses his hat color wrong, otherwise the team loses. The aim is to maximize the probability of win. In this version every...
-
The effect of preliminary creep-strain on material behavior under LCF tension/compression and pure torsion regimes
PublicationThis paper presents the results of experimental tests of monotonic tension and torsion, creep-rupture and preliminary creep at 200C and 300C, as well as low-cycle fatigue of 2024 T3511 aluminum alloy. The fatigue process was conducted at room temperature for uniaxial tension/compression and torsion. The as-received material and pre-deformed material were also investigated during creep at elevated temperature. Basic monotonic,...
-
Cognitive engineering and functional safety technology for reducing risks in hazardous plants
PublicationCognitive engineering is considered nowadays as interesting multidisciplinary domain that focuses on improving the relations between humans and the systems that are supervised and operated. The industrial automation and control systems (IACS) in hazardous plants are increasingly computerized and perform various safety functions. These are designed and implemented according to the functional safety concept. The objective is to maintain...
-
Diatoms Biomass as a Joint Source of Biosilica and Carbon for Lithium-Ion Battery Anodes
PublicationThe biomass of one type cultivated diatoms (Pseudostaurosira trainorii), being a source of 3D-stuctured biosilica and organic matter—the source of carbon, was thermally processed to become an electroactive material in a potential range adequate to become an anode in lithium ion batteries. Carbonized material was characterized by means of selected solid-state physics techniques (XRD, Raman, TGA). It was shown that the pyrolysis...
-
Composite as a Material of the Future in the Era of Green Deal Implementation Strategies
PublicationComposite materials have become synonymous with modernity, desired in nearly every aspect of our daily lives, from simple everyday objects to sanitary facilities, pipelines, the construction of modern sewer networks, their renovation, water supply, and storage reservoirs, to complex structures—automotive, planes, and space science. Composites have seen a considerable rise in attention owing to their characteristics, durability,...
-
Wave propagation signals in concrete beams under 3-point bending
Open Research DataThe DataSet contains the results of the mechanical behaviour of a concrete beams with dimensions 40 x 40 x 160 cm3under the 3-point bending. The beams were made of concrete with the following ingredients: CEM I 42.5R (450 kg/m3), water (177 kg/m3), sand 0-2 (675 kg/m3) and gravel 2-8 (675 kg/m3). The bending test was performed using a Zwick/Roell Z10...
-
Integrated safety and security analysis of hazardous plants and systems of critical infrastructure
PublicationThis article addresses an integrated safety and security analysis approach of hazardous industrial plants and systems of critical infrastructure. Nowadays due to new hazards that emerge there are opinions among experts that these issues require an integrated approach in life cycle, from the design concept, through the design and operation of the plant, to its decommissioning. It is proposed to start from an interesting methodology...
-
Domestic ORC micro-CHP combined with a commercial gas boiler
PublicationThe chapter presents the results of experimental studies conducted during the launch of the first in Poland demonstration prototype of the micro ORC coupled to a domestic gas boiler. The accomplished studies indicated the possibility for the ORC module to work with such boiler (autonomous source of heat) with a prototype single-stage axial micro turbine as the expansion machine. Confirmation of that fact has been delineated in...
-
Evolutionary approach to ship's trajectory planning within Traffic Separation Schemes
PublicationThe paper presents the continuation of the author's research on evolutionary approach to ship trajectory planning. While the general problem of the evolutionary trajectory planning has already been solved, no one has yet touched one of its specific aspects: evolutionary trajectory planning within Traffic Separation Schemes. Traffic Separation Scheme (TSS) is a traffic-management route-system complying with rules of the International...
-
Analiza obiegów kogeneracyjnych z silnikami tłokowymi i mikroturbi-nami
PublicationPrzeprowadzono analizę dla układów kogeneracyjnych z mikroturbinami wykorzystującymi ciepło odpadowe z silników tłokowych. Rozważono cztery główne źródła ciepła odpadowego z silników tłokowych: spaliny wylotowe, woda chłodząca silnik, olej smarny i ciepło z systemu turbodaładowania. Obliczenia przeprowadzono dla silników General Electric Jerbacher typów: J320 GS-C25 i J416 GS-B05. Uwzględniono różne czynniki robocze siłowni (zarówno...
-
Acceptance Testing of Software Products for Cloud-Based On-Line Delivery
PublicationSoftware products intended for on-line delivery by distributors serving an open community of subscribers are developed in a specific life-cycle model, in which roles of the major stakeholders are strongly separated, unlike in any other software development model known in software engineering. Its specificity underlines the fact that a distributor of the final product, responsible for its acceptance for publication and delivery...
-
Koncepcja, modelowanie i symulacja układu napędowego prototypu samochodu elektrycznego "ELV001"
PublicationAbstract: In this paper a conception, modelling and simulation tool for drive system of the prototype electric vehicle ''ELV001'' have been presented. The design and building of this vehicle have been carried out in frame of the project: ''Building a market of electric vehicle and charging infrastructure - fundamentals of energy safety''. The simulation tools are of great assistance to engineers and researchers to reduce product-development...
-
Sensorless IPMSM drive with rotor position estimator based on analysis of phase current derivatives
PublicationThis paper describes a sensorless Interior Permanent Magnet Synchronous Motor (IPMSM) drive designed for traction applications. Wide-speed sensorless operation is provided with the use of three methods of rotor position estimation designed for: a standstill, low- and high-speed range. The paper focuses on the high-speed estimation algorithm. The estimator uses the derivatives of motor phase currentsresulting from PWM modulation...
-
Investigations of Aerodynamics of Tesla Bladeless Microturbines
PublicationThe paper presents an analysis of a Tesla bladeless turbine for a co-generating micro-power plant of heat capacity 20 kW, whichoperates in an organic Rankine cycle with a low-boiling medium. Numerical calculations of flow in several Tesla turbine models areperformed for a range of design parameters. Results of investigations exhibit interesting features in the distribution of flowparameters within the turbine interdisk space. The...
-
Acoustic Processor of the Mine Countermeasure Sonar
PublicationThis paper presents the concept of an acoustic processor of the mine countermeasure sonar. Developed at the Department of Marine Electronics Systems, Gdansk University of Technology, the acoustic processor is an element of the MG-89, an underwater acoustic station. The focus of the article is on the modules of the processor. They are responsible for sampling analogue signals and implementing the algorithms controlling the measurement...
-
The hat problem on cycles on at least nine vertices
PublicationThe topic is the hat problem in which each of n players is randomly fitted with a blue or red hat. Then everybody can try to guess simultaneously his own hat color by looking at the hat colors of the other players. The team wins if at least one player guesses his hat color correctly, and no one guesses his hat color wrong; otherwise the team loses. The aim is to maximize the probability of winning. In this version every player...
-
A random signal generation method for microcontrollers with DACs
PublicationA new method of noise generation based on software implementation of a 7-bit LFSR based on a common polynomial PRBS7 using microcontrollers equipped with internal ADCs and DACs and a microcontroller noise generator structure are proposed in the paper. Two software applications implementing the method: written in ANSI C and based on the LUT technique and written in AVR Assembler are also proposed. In the method the ADC results are...
-
Assessment of image processing methods for the determination of propagation of squat-type defects in rails
PublicationWe demonstrate the idea of squat-type defect measurement in the rail and the concept of tracking of the defect development using the techniques of image acquisition and image processing as well as the methods of metric spaces. We introduce the concepts of a set diameter δ(A) and the metric ρ1, which come from the properties of plane figures, to compare and to observe the development of the defects. We characterize the feasibility...
-
Material Flow Analysis in a cooked mussel processing industry
PublicationGalicia (NW Spain) is an ideal environment for mussel culture owing to its excellent natural conditions. It is the first Spanish and European mussel producer and the second worldwide after China. More than 50% of the mussel collected in Galicia is used in the processing industry, which produces different products, as cooked mussel that is canned, frozen or used in the food industry. In this paper a methodology based on Life Cycle...
-
Interdyscyplinarne studia doktoranckie na Politechnice Gdańskiej - przykład dobrych praktyki w zakresie realizacji projektów miękkich współfinansowanych z UE
PublicationNiniejszy artykuł przedstawia teoretyczne podstawy zarządzania projektem współfinansowanym ze środków jednego z funduszy strukturalnych Unii Europejskiej (UE), jakim jest Europejski Fundusz Społeczny (EFS). Jako metodę zarządzania projektem wskazano koncepcję Project Cycle Management - PCM. Za przykład dobrych praktyk został w artykule uznany realizowany przez Politechnikę Gdańską (PG) oraz Instytut Maszyn Przepływowych Polskiej...
-
Applicability of an effective conductivity approach in modeling thoracic impedance changes
PublicationThis paper describes numerical simulations of the influence of conductivity changes inside a volume conductor on impedance changes measured on its surface. A simple model based on the finite element method has been developed to estimate an applicability of the effective conductivity theory in human chest modeling. The model consisted of a cylinder with two concentric spheres inside. Simulations were performed for two cases: first...
-
Composite GFRP U-shaped footbridge
PublicationThe paper presents proposals for the use of glass fiber reinforced polymer composites for the construction of engineering objects, known and commonly used in the shipbuilding industry. An example of a pedestrian footbridge was used in this case, which, despite the considerable thickness of the structural material, was made using infusion technology in one production cycle. The designed and produced footbridge span is durable, dynamically...
-
Release and Transport of Toxic, Mobile Organic Compounds (Formaldehyde and Phenols) on an Arctic Glacier
PublicationAs a result of current deglaciation, the chemical cycles of many compounds, including toxic formaldehyde and phenols, are changing. However, the processes by which these chemicals are released have yet to be studied in situ. Here, we quantify fluxes of HCHO and phenols in a glacial catchment within one summer season, obtaining a net release from the glacier of 0.106 · 106 g formaldehyde and 0.255 · 106 g phenols, which can be interpreted...
-
TERMODYNAMIC CALCULATIONS OF TURBINE STEAM PARAMETERS
PublicationIn this work a heat balance was made for the nominal conditions of a block working with 18K370 turbine. For the parameters obtained, the thermal-flow calculations of the steam turbine were performed, maintaining the actual geometry of its flow system. Based on the nominal values obtained, iterative thermal and flow calculations were made for both the heat cycle of the power plant block and the steam turbine itself, seeking to obtain...
-
Capillary pumped loop as a tool for collecting large heat fluxes from electronic devices on warships
PublicationThe combat potential of future warships will be directly related to the use of modern electronic devices being parts of advanced systems, such as, for instance, radar systems, fire aiming systems, fire detection systems, electric drive systems, and even electronic and radio-electronic weaponry, railguns and lasers, installed on these warships. The capacity and functionality of these devices is continually increasing, at decreasing...
-
Self-Organization in Multi-Agent Systems Based on Examples of Modeling Economic Relationships between Agents
PublicationThe goal of the research was to observe and analyze self-organization patterns in Multi-Agent Systems (MAS) by modeling basic economic relationships between agents forming a closed loop of relations necessary for their survival. The paper describes a worked-out MAS including an example of a production cycle and used economic rules. A special focus is put on behavior rules and decision systems of an individual agent such as: product...
-
Zabezpieczenia antykorozyjne stalowych barierek ochronnych na obiektach mostowych w ujęciu kosztów cyklu ich życia
PublicationThe article presents the Life Cycle Costs analysis of steel safety barriers operated in road lane conditions, located on a selected bridge structure. Three corrosion protection systems were proposed, analyzing them in terms of the cost of initial and planned outlays related to maintenance. Based on the LCC analysis for three options, taking into account the 25-year lifetime of the barriers, the optimal solutionwas indicated, i.e....
-
Shape Memory Materials from Rubbers
PublicationSmart materials are much discussed in the current research scenario. The shape memory effect is one of the most fascinating occurrences in smart materials, both in terms of the phenomenon and its applications. Many metal alloys and polymers exhibit the shape memory effect (SME). Shape memory properties of elastomers, such as rubbers, polyurethanes, and other elastomers, are discussed in depth in this paper. The theory, factors...
-
DESIGN AND THEORETICAL ANALYSIS OF A PROTOTYPE TILTING-PAD RADIAL BEARING WITH ADJUSTABLE CLEARANCE
PublicationThe article introduces a design and analysis results of a prototype ORC (organic Rankine cycle) turbo generator rotor assembly of 300kW power, supported by tilting-pad bearings of original design. The calculations were performed for a prototype turbo generator rotor. The shaft of this machine is supported with two radial bearings, lubricated with an unusual lubricant – a low-boiling-point agent. The main objective of the presented...
-
AN ENERGY APPROACH TO THE FATIGUE LIFE OF SHIP PROPULSION SYSTEMS
PublicationThe conducted research investigations aimed to carry out an identification of the constructional materials fatigue state of the ship propulsions’ rotational mechanical units for diagnostic purposes. The fatigue cracks of the elements transmitting mechanical energy streams from the propulsion engines to the ship propellers or to the generators of the ship’s electric power station stand for a primary reason for the secondary, usually...
-
Multi-instrument analysis of L-band amplitude scintillation observed over the Eastern Arabian Peninsula
PublicationThe study of scintillation-causing ionospheric irregularities is important to mitigate their effects on satellite communications. It is also important due to the spatial and temporal variability of these irregularities, given that their characteristics differ from one region to another. This study investigates the spatial and temporal characteristics of L1 amplitude scintillation-causing ionospheric irregularities over the Eastern...
-
Towards systemic functional safety and security management in hazardous plants
PublicationThe aim of this article is to identify and discuss some issues related to functional safety and security management in hazardous industrial plants. The safety functions are to be realised using the electric / electronic / programmable electronic systems (E/E/PESs) or the safety instrumented systems (SISs) that are designed and operated respectively according to IEC 61508 and IEC 61511 requirements in life cycle. Although the role...