Filters
total: 696
filtered: 585
-
Catalog
Chosen catalog filters
Search results for: SPALLING
-
Technical evaluation of marine auxiliary diesel engine on the basis of parameters synchronous generator
PublicationThe article presents a method for evaluating the technical condition of selected structural elements of the reciprocating internal combustion engine driving a synchronous generator. Th results of measurements of the electric generator parameters are the diagnostic information source. On this basis it is possible to determine the instantaneous angular speed marine engine crankshaft which, in turn, is the basis for reasoning about...
-
Microwave Alignment and Displacement Sensors in Groove Gap Waveguide Technology
PublicationThis paper is aimed at presenting highly sensitive microwave displacement and alignment sensors. With this goal, the method of realizing mechanically tunable cavity resonators in groove gap waveguides technology is presented. The resonance frequency of the cavity is then used for displacement sensing. It is also demonstrated that the symmetry properties of a pair of groove gap waveguide cavities can be used to improve the robustness...
-
TS-based RSM-aided design of cold-formed steel stiffened C-sectional columns susceptible to buckling
PublicationThe paper focuses on joint-performance analysis of a built-up cold-formed thin-walled C-sectional column with a fillister (stiffener) of the same type, interconnected with a series of bolts located along the length of the compressed members in specific spacing. The quantity of bolts and the non-connected starting distance of the fillister are considered random variables of the problem. Optimal distribution of joints on the stiffener...
-
Makro modele przebiegu pojazdów
PublicationWśród wielu miar transportowych praca przewozowa pojazdów jest bardzo często wykorzystywana na poziomie makro (dla obszaru kraju) i używana do szacowania: przewidywanej wielkości zużytego paliwa, potencjalnej liczby pojazdów, wielkości i rodzaju emitowanych spalin, a także liczby wypadków i liczby ofiar wypadków drogowych. W referacie przedstawiono makro modele pracy przewozowej pojazdów zbudowane na bazie danych z kilkudziesięciu...
-
A COMPUTATIONAL ALGORITHM FOR THE NUMERICAL SOLUTION OF NONLINEAR FRACTIONAL INTEGRAL EQUATIONS
Publication -
MEMORY EFFECT ANALYSIS USING PIECEWISE CUBIC B-SPLINE OF TIME FRACTIONAL DIFFUSION EQUATION
PublicationThe purpose of this work is to study the memory effect analysis of Caputo–Fabrizio time fractional diffusion equation by means of cubic B-spline functions. The Caputo–Fabrizio interpretation of fractional derivative involves a non-singular kernel that permits to describe some class of material heterogeneities and the effect of memory more effectively. The proposed numerical technique relies on finite difference approach and cubic...
-
A NUMERICAL STUDY ON THE DYNAMICS OF DENGUE DISEASE MODEL WITH FRACTIONAL PIECEWISE DERIVATIVE
PublicationThe aim of this paper is to study the dynamics of Dengue disease model using a novel piecewise derivative approach in the sense of singular and non-singular kernels. The singular kernel operator is in the sense of Caputo, whereas the non-singular kernel operator is the Atangana–Baleanu Caputo operator. The existence and uniqueness of a solution with piecewise derivative are examined for the aforementioned problem. The suggested...
-
Calculations of notch stress factor of a thin-walled spreader bracket fillet weld with the use of a local stress approach
PublicationPresence of geometric notches in welded joints causes concentration of strains and stresses, therefore reducing fatigue strength of such joints. This article presents an analysis of stress concentrations in a fillet weld of a spreader mounting bracket on a small sailing yacht. The aim of this article is to direct the attention of designers, manufacturers and regulatory bodies to issues of fatigue cracks that form in brackets fastening...
-
DL_MG: A Parallel Multigrid Poisson and Poisson–Boltzmann Solver for Electronic Structure Calculations in Vacuum and Solution
PublicationThe solution of the Poisson equation is a crucial step in electronic structure calculations, yielding the electrostatic potential -- a key component of the quantum mechanical Hamiltonian. In recent decades, theoretical advances and increases in computer performance have made it possible to simulate the electronic structure of extended systems in complex environments. This requires the solution of more complicated variants of the...
-
Measuring Consumers' Engagement With Brand-Related Social-Media Content. Development and Validation of a Scale that Identifies Levels of Social-Media Engagement with Brands
PublicationThe purpose of the current study was to develop a scale to measure the consumer's engagement with brand-related social-media content, based on three dimensions established in the framework of an earlier theoretical construct, “Consumer's Online Brand-Related Activities” (Muntinga, Moorman, and Smit, 2011). Qualitative techniques were used to generate an initial pool of items that captured different levels of consumer engagement...
-
Bond-graphs based modelling of hybrid energy systems with permanent magnet brushless machines
PublicationW referacie przedstawiono metodę grafów wiązań (GW) w zastosowaniu do modelowania hybrydowych systemów energetycznych z bezszczotkowymi maszynami elektrycznymi o magnesach trwałych. W części pierwszej referatu omówiono ogólne formalizm GW. Następnie przedstawiono kolejno: ogólną strukturę modelu hybrydowego systemu energetycznego w ujęciu GW; założenia modelowania maszyn elektrycznych w ujęciu GW, model silnika bezszczotkowego...
-
Bond-graphs based modelling of hybrid energy systems with permanent magnet brushless machines
PublicationW referacie przedstawiono metodę grafów wiązań (GW) w zastosowaniu do modelowania hybrydowych systemów energetycznych z bezszczotkowymi maszynami elektrycznymi o magnesach trwałych. W części pierwszej referatu omówiono ogólne formalizm GW. Następnie przedstawiono kolejno: ogólną strukturę modelu hybrydowego systemu energetycznego w ujęciu GW; założenia modelowania maszyn elektrycznych w ujęciu GW, model silnika bezszczotkowego...
-
Smooth Particle Hydrodynamics (SPH) approach in simulating large penetration into soil
PublicationA study of Smooth Particle Hydrodynamics (SPH) approach for predicting large soil deformation is presented. Theoretical basics of SPH method, including the equations governing, discussion of the importance of smoothing function length, contact formulation, boundary treatment and finally utilization in hydrocodes simulations are presented. An application of SPH to a real case of large penetrations (crater creating) into soil caused...
-
Use of Sensory Analysis Methods to Evaluate the Odor of Food and Outside Air
PublicationSensory analysis is applied in many areas of daily life. It is used to carry out the sensory evaluation of foodstuffs or other products and to evaluate the properties of odors present in the environment. The authors attempt to summarize the knowledge on the classification and application of sensory analysis methods to evaluate the odor nuisance of air, which allows the identification of sensory impressions and determination of...
-
Development trends of automotive engine cooling systems
PublicationDzięki daleko idącym modyfikacjom układów zasilania i zapłonu silników samochodowych oraz udoskonaleniom układów oczyszczania spalin uzyskano znaczne zmniejszenie emisji związków toksycznych. Układy chłodzenia z pompą cieczy napędzaną mechanicznie stają się archaiczne nie pozwalając na swobodne sterowanie obiegiem cieczy. Również różna wartość temperatury potrzebnej do schładzania różnych procesów wymaga sterowanych zaworów trójdrożnych...
-
Possible use of combined diesel engine/steam turbine in ship power plant = Możliwości zastosowania układów kombinowanych: silnik diesla - turbina parowa w siłowniach okrętowych
PublicationW artykule przedstawiono układ kombinowany dużej mocy. Składa się on z silnika spalinowego tłokowego oraz skojarzone z nim układu turbiny parowej, wykorzystującego energię spalin wylotowych. Rozpatrzono tylko wariant silnik Diesla - turbina parowa, z kotłem utylizacyjnym jednociśnieniowym. Podano założenia i ograniczenia oraz wyniki obliczeń z opracowanego programu komputerowego. Obliczenia numeryczne wykonano dla silników spalinowych...
-
Monocykl elektryczny – projekt i realizacja
PublicationW ostatnich czasach zaobserwować można rozwój pojazdów elektrycznych. Czynnikami, które pozytywnie wpływają na to zjawisko jest redukcja emisji spalin oraz hałasu, które emitują standardowe pojazdy. Przy mniejszych, mobilnych konstrukcjach elektrycznych, dodatkową zaletą jest zmniejszenie problemu związanego z zatłoczeniem ulic. Artykuł przedstawia projekt oraz wykonanie monocyklu elektrycznego. Uwzględniając założenia projektowe,...
-
Projektowanie sterowania monocyklem elektrycznym
PublicationWraz z rozwojem technologii zaobserwować można globalny wzrost zainteresowania branżą pojazdów elektrycznych. Czynnikami, które pozytywnie wpływają na to zjawisko jest możliwość redukcji spalin oraz hałasu, które emitują standardowe pojazdy. Przy mniejszych, mobilnych konstrukcjach elektrycznych, dodatkową zaletą jest zmniejszenie problemu związanego z zatłoczeniem ulic. Artykuł zawiera opis projektu monocyklu elektrycznego, dla...
-
Monitoring zrównoważonej mobilności miejskiej
PublicationDynamiczny rozwój miast i zmiany w stylu życia mieszkańców, skutkują nieustannym wzrostem i zmianami ich potrzeb transportowych. Zmiany zachowań transportowych wiążą się ściśle z kongestią, wypadkami komunikacyjnymi, emisjami spalin i hałasu, a w konsekwencji – wpływają na jakość życia. W związku z tym, zrównoważone podejście do zagadnień mobilności i planowania transportu w miastach, staje się coraz bardziej powszechne we wszystkich...
-
On extremal sizes of locally k-tree graphs
PublicationA graph G is a locally k-tree graph if for any vertex v the subgraph induced by the neighbours of v is a k-tree, k>=0, where 0-tree is an edgeless graph, 1-tree is a tree. We characterize the minimum-size locally k-trees with n vertices. The minimum-size connected locally k-trees are simply (k + 1)-trees. For k >= 1, we construct locally k-trees which are maximal with respect to the spanning subgraph relation. Consequently, the...
-
Modelowanie osiągów niskoemisyjnych ogniw paliwowych za pomocą modeli matematycznych typu CFM.
PublicationW artykule przedstawiono matematyczny model rurkowego ogniwa paliwowego i jego implementację do własnego kodu typu CFM (Computational Flow Mechanics) o nazwie COM-GAS. Kody numeryczne CFM pozwalają przewidzieć podstawowe parametry ogniwa takie jak: prąd, napięcie, skład spalin etc. Napięcie generowane przez ogniwo paliwowe wyznaczono na podstawie rozszerzonego równania Nernsta. Skład spalin oszacowano opierając się o stałą równowagi...
-
Smoking: Traditional
PublicationSmoking, drying, and salting belong to the oldest methods of food preservation. Meat hung by the fire was preserved by a combination of drying and smoking. Often the raw material was first pickled in brine. In different regions of the world various procedures have been developed, best suited for treating meats and fish for specific purposes. Smoking extended the shelf life and imparted very desirable, new sensory properties to...
-
A Method of Real-Time Non-uniform Speech Stretching
PublicationDeveloped method of real-time non-uniform speech stretching is presented.The proposed solution is based on the well-known SOLA algorithm(Synchronous Overlap and Add). Non-uniform time-scale modification isachieved by the adjustment of time scaling factor values in accordance with thesignal content. Dependently on the speech unit (vowels/consonants), instantaneousrate of speech (ROS), and speech signal presence, values of the scalingfactor...
-
Daylight design for urban residential planning in Poland: in regulations and practice. A comparison study of daylight conditions observed in the four neighbouring residential areas
PublicationThis paper reports on the partial results of the research aiming to illustrate how an integration of daylight design into an architectural planning process can help designers to create the residential buildings in respect to the environmental issues, solar and illuminance gains, as well as, the residents’ needs and comfort. It describes how changing daylight recommendations affected the design of the block of flats regarding their...
-
Design of Jack-up Platform for 6 MW Wind Turbine: Parametric Analysis Based Dimensioning of Platform Legs
PublicationThe article presents the results of the research conducted within the framework of the project entitled WIND-TU-PLA (ERA-NET, MARTEC II), the general aim of which was to design and analyse supporting structures for wind turbines intended for operation on the South Baltic area. The research part described in the article aimed at developing a preliminary design for a jack-up platform which can operate on water areas with depth of...
-
Electrochemical Production of Sodium Hypochlorite from Salty Wastewater Using a Flow-by Porous Graphite Electrode
PublicationThe production of sodium hypochlorite (NaOCl) from salty wastewater using an electrochemical cell has several advantages over other methods that often require hazardous chemicals and generate toxic waste, being more sustainable and environmentally friendly. However, the process of producing sodium hypochlorite using an electrochemical cell requires careful control of the operating conditions, such as the current density, flow rate,...
-
Rower w mieście - polskie doświadczenia
PublicationRozwój ruchu rowerowego może wpływać na jakość życia w mieście na kilka sposobów: zmniejszając zainteresowanie korzystaniem z indywidualnej komunikacji samochodowej, przyczyniając się do spadku emisji spalin oraz rozwijając wśród mieszkańców nawyk regularnej aktywności fizycznej. Na gęsto zaludnionych obszarach, wobec niewydolności rozbudowanych systemów komunikacji samochodowej, rower może stać się atrakcyjną alternatywą.Artykuł...
-
Planowanie zrównoważonego transportu miejskiego w Gdyni
PublicationWzrastający popyt na transport indywidualny jest jedną z przyczyn zatłoczenia sieci ulicznej, a co za tym idzie zwiększenia uciążliwości środowiskowych (emisja spalin i hałas) oraz pogorszenia bezpieczeństwa ruchu drogowego (wzrost liczby zdarzeń drogowych). Pojawia się zatem konieczność działań, które ograniczą negatywne skutki rozwoju motoryzacji i zaczną je niwelować. W referacie przedstawiono program działań, które miasto Gdynia...
-
Use of waste heat to improve the conditions of the piston engines start up
PublicationZespoły prądotwórcze z tłokowymi silnikami spalinowymi są obecnie powszechne stosowane jako awaryjne źródła energii elektrycznej albo elektrownie uzupełniające niedobory energii czy stabilizujące częstotliwość. Ich czas rozruchu powinien być krótki - poniżej 5 minut w przypadku dużych mocy. Zużycie silnika, zużycie paliwa i emisji spalin są silnie uzależnione od stanu cieplnego przed rozruchem. Przedstawiono pomiary laboratoryjne...
-
RAPORT-EKSPERTYZA Badania endoskopowe silników głównych i pomocniczych na jednostce "Kapitan Poinc"
PublicationOcena stanu technicznego dwóch silników Deutz typu SBV 12M628 oraz dwóch silników Deutz typu TBD 234 V08 opracowana na podstawie przeglądu endoskopowego przestrzeni cylindrowych, ze szczególnym uwzględnieniem gładzi cylindrowych, głowic, gniazd zaworowych i denek tłoków oraz dostępnych elementów konstrukcyjnych układów turbodoładowania, z kanałami połączeniowymi powietrza i spalin. Badania przeprowadzono wideoendoskopem firmy Everest...
-
Recent Advances in Graphene Oxide-Based Membranes for Heavy Metal Ions Separation
PublicationGraphene oxide (GO)-based membranes have been widely investigated for separation of dyes, salt ions, heavy metal ions, and biomolecules due to their high mechanical strength, single-layered structure, large surface area, and high affinity. However, due to irregular pore structure, nanochannels, interlayer distance, easy functionalization, swelling effect, and chemical stability under aqueous environment limited their separation...
-
Modification of Ground Tire Rubber—Promising Approach for Development of Green Composites
PublicationGround tire rubber (GTR) was mechano-chemically modified using a road bitumen 100/150 and two types of organic peroxides: di-(2-tert-butyl-peroxyisopropyl)-benzene (BIB) and dicumyl peroxide (DCP). The impact of used additives on reactive sintering efficiency and physico-mechanical properties of modified GTR was investigated using oscillating disc rheometer measurements, followed by tensile tests and swelling behavior studies....
-
Impact of interface heterogeneity on joint fracture
PublicationThe effects of heterogeneities (weak zones in particular) inadhesive joints and their importance on overall fracture propertiesare relatively unknown, but doubtlessly they may be crucial inmany applications. Using a model heterogeneous adhesive bond,represented by a given mixture of regions of strong and weakadhesion, we have studied the influence of interface variabilityon overall fracture energy (global energy release rate)....
-
Analiza lepko sprężysta wirnika promieniowego
PublicationAnalizie poddano wirnik wentylatora promieniowego z typoszeregu 405/315. Wentylator zaprojektowany jest w sposób poprawny; zgodny ze sztuką rzemieślniczą. W procesie projektowania posłużono się narzędziami inżynierskimi jak i analizą CSD. Wymagania Normowe do których należalo sie odnieść nie przewidują obciążeń od przejścia fali uderzeniowej. Wirnik wentylatora spełnia wymagania dla klasy F400, tzn. w czasie 120 min. pracy w temperaturze...
-
Inspection of protective linings using microwave spectroscopy combined with chemometric methods
PublicationOpisano nowa niedestrukcyjna metodę kontroli jakości nowych wykładzin ochronnych na podłożu metalowym oraz oceny ich stanu w trakcie eksploatacji przy zastosowaniu spektroskopii mikrofalowej w szerokim zakresie częstotliwości od 6,5 do 13 GHz. Uzyskane dane pomiarowe dodane zostały obróbce chemometrycznej w celu redukcji ilości danych doświadczalnych i wizualizacji rezultatów. Przedstawiono podstawy teoretyczne metody oraz wyniki...
-
Kontrola stanu wykładzin przeciwkorozyjnych przy zastosowaniu spektroskopii mikrofalowej i metod chemometrycznych
PublicationPrzedstawiono nową niedestrukcyjną metodę kontroli jakości nowych wykładzin przeciwkorozyjnych na podłożu metalowym oraz oceny ich stanu w trakcie eksploatacji przy zastosowaniu spektroskopii mikrofalowej w szerokim zakresie częstotliwości od 6,5 do 20 GHz. Uzyskane dane poddawane są obróbce chemometrycznej w celu redukcji danych doświadczalnych i wizualizacji rezultatów. Zaprezentowano podstawy teoretyczne metody oraz przykładowe...
-
Model niezawodnościowy turbinowego silnika spalinowego napędu głównego statku.
PublicationW artykule przedstawiono możliwość zastosowania teorii procesów semimarkowskich do opisu niezawodności okrętowego turbinowego silnika spalinowego. W rozważaniach uwzględniony został silnik dwuwałowy składający się z następujących urządzeń: sprężarki, komory spalania i turbiny wytwornicy spalin oraz turbiny napędowej. Wyprowadzone zostały wzory określające rozkład graniczny procesu zmian stanów technicznych takiego silnika. Rozkład...
-
Charakterystyka wielowymiarowa silnika spalinowego jako elementu hybrydowego układu napędowego pojazdu
PublicationCharakterystyka wielowymiarowa przypisuje kazdemu punktowi pracy silnika wektor, którego składowymi są, w rozważanym przypadku, jednostkowe zużycie paliwa ge oraz emisja jednostkowa toksycznych składników spalin: tlenku węgla CO, węglowodorów HC i tlenków azotu NOx. W referacie opisano stanowisko badawcze umożliwiające wykonanie pomiarów niezbędnych do wyznaczenia charakterystyki wielowymiarowej silnika spalinowego przeznaczonego...
-
A current-controlled FET
PublicationA novel semiconductor device, viz., Horizontally-Split-Drain Current-Controlled Field-Effect Transistor (HSDCCFET) with two control electrodes is proposed in this works. For the sake of brevity, the device can be called a CCFET. Operating principle of the proposed transistor is based on one of the galvanomagnetic phenomena, the Biot-Savart-Laplace law and a Gradual Channel Detachment Effect (GCDE). The transistor is dedicated...
-
New approach for the synthesis of Ag3PO4-graphene photocatalysts
PublicationA facile and effective plasma sputtering method for the preparation of a visible light active photocatalyst - rhombic dodecahedral silver phosphate Ag3PO4 covered with nanographene (Ag3PO4-GR) with improved stability has been developed. Proposed method allows for the usage of readily available materials for nanographene sputtering and for easy scaling-up. The stability improvement, confirmed by visible light-induced phenol degradation...
-
Improving Objective Speech Quality Indicators in Noise Conditions
PublicationThis work aims at modifying speech signal samples and test them with objective speech quality indicators after mixing the original signals with noise or with an interfering signal. Modifications that are applied to the signal are related to the Lombard speech characteristics, i.e., pitch shifting, utterance duration changes, vocal tract scaling, manipulation of formants. A set of words and sentences in Polish, recorded in silence,...
-
Database for integration of information in distributed data exchange system elements of Border Guard
PublicationThe paper presents the database solution for integration of information in distributed data exchange system elements of the Polish Border Guard. The proposed database solution is described in the context of data exchange system elements which control position and store identification data of vessels (fishing, sports and sailing boats) and other suspicious objects on the territorial sea, sea-coast and the internal sea-waters controlled...
-
Influence of lubricating oil improvers on performance of crankshaft seals
PublicationThis paper presents an original method for checking influence of lubricating oil improvers on performance of crankshaft seals of combustion piston engine. Crankshaft seals were tested with the use of a modified friction node of T-02 four- ball apparatus in laboratory conditions. The tests were conducted according to a worked-out algorithm. Their results confirmed usefulness of the method for determining „harmful” performance...
-
2015. Motion analysis of a kitesurfer employing a vision-based measurement system
PublicationAbstract. Kitesurfing is a relatively new phenomenon with rising popularity worldwide – a recently developed extreme watersport considered a high-risk injury sport. It combines elements of several other sports, in particular, sailing, surfing, windsurfing, wakeboarding, and snowboarding. The main purpose of authors’ research in the present paper is to use a vision-based system for measuring a kitesurfer’s body movements in order...
-
Psychometric properties of the polish version of the job-related affective well-being scale
PublicationObjectives: The aim of this study was to verify psychometric properties of the Polish version of the Job-related Affective Well-being Scale (JAWS). Specifically, theoretical 4-factor structure (based on the dimensions of pleasure and arousal) and reliability of the original – 20-item JAWS (van Katwyk et al., 2000) and the shortened – 12-item (Schaufeli and Van Rhenen, 2006) versions were tested. Material and Methods: Two independent...
-
Impact response of novel layered two stage fibrous composite slabs with different support type
PublicationThe performance of novel Layered Two Stage Fibrous Composite slabs (LTSFC) was pioneered under falling mass collisions using a combined experimental and numerical study. Such LTSFC slabs consist of three layers with and without the insertion of glass fibre mesh between the layers. LTSFC techniques were used to fabricate the composite slabs with three layers including 3%, 1.5%, and 3% of fibre content for the top, middle, and...
-
Effectiveness of toluene separation from gas phase using supported ammonium ionic liquid membrane
PublicationAmmonium ionic liquids (ILs) are relatively cheap in synthesis and environmentally benign and despite that they have been very rarely used in gas separation. In this research we used several ammonium ILs as liquid membranes for removal of residual toluene from gas phase. Ionic liquids used in this study were composed of bis(trifluoromethylsulfonyl)imide anion [Tf2N] and trimethylbutylammonium [N1114], trietylbutylammonium [N2224],...
-
Hybrid cross-linked chitosan/protonated-proline:glucose DES membranes with superior pervaporation performance for ethanol dehydration
PublicationThis work explores a protonated L-proline:glucose (molar ratio 5:1) deep eutectic solvent (DES) in fabricating biopolymer membranes utilizing chitosan (CS). Initially, the miscibility of CS and DES to prepare homogeneous dense blend membranes has been investigated. Different techniques, such as scanning electron microscopy, contact angle (CA), atomic force microscopy (AFM), Fourier transformed infrared spectroscopy (FTIR) and swelling...
-
A note on the affective computing systems and machines: a classification and appraisal
PublicationAffective computing (AfC) is a continuously growing multidisciplinary field, spanning areas from artificial intelligence, throughout engineering, psychology, education, cognitive science, to sociology. Therefore, many studies have been devoted to the aim of addressing numerous issues, regarding different facets of AfC solutions. However, there is a lack of classification of the AfC systems. This study aims to fill this gap by reviewing...
-
The Effect of Polyurethane Glycolysate on the Structure and Properties of Natural Rubber/Carbon Black Composites
PublicationIn this work the use of polyurethane chemical recycling product (i.e. glycolysis of polyurethane waste realized with the mass excess of polymer) as a plasticizer for natural rubber-based composites was proposed. The effect of plasticizer type (napthenic oil and polyurethane foam glycolysate) and amount (2, 4, 6 or 8 parts per 100 parts of natural rubber) on the processing properties of rubber mixtures and chemical structure, swelling,...