Search
Filters
total: 664
-
Catalog
Search results for: PODCHWYCENIE FUNDAMENTÓW
-
Wind Conditions at Pedestrian Level in Different Types of Residential Urban Development for a High Degree of Land Use Efficiency
PublicationThe paper concerns wind conditions around urban building development at the pedestrian level. The article aims to identify aerodynamic phenomena around three types of multi-family housing developmentswith different forms and the same urban parameters of building development intensity (high intensity was taken into account). The aim of the research was mainly to achieve qualitative results that would lead to understanding fundamental...
-
The Conceptual Research over Low-Switching Modulation Strategy for Matrix Converters with the Coupled Reactors
PublicationIn this paper, different Pulse Width Modulation (PWM) strategies for operating with a low-switching frequency, a topology that combines Conventional Matrix Converters (CMCs), and Coupled Reactors (CRs) are presented and discussed. The principles of the proposed strategies are first discussed by a conceptual analysis and later validated by simulation. The paper shows how the combination of CMCs and CRs could be of special interest...
-
Low-volume label-free SARS-CoV-2 detection with the microcavity-based optical fiber sensor
PublicationAccurate and fast detection of viruses is crucial for controlling outbreaks of many diseases; therefore, to date, numerous sensing systems for their detection have been studied. On top of the performance of these sensing systems, the availability of biorecognition elements specific to especially the new etiological agents is an additional fundamental challenge. Therefore, besides high sensitivity and selectivity, such advantages...
-
A Review: Applications of the Spectral Finite Element Method
PublicationThe Spectral Finite Element Technique (SFEM) has Several Applications in the Sciences, Engineering, and Mathematics, which will be Covered in this Review Article. The Spectral Finite Element Method (SFEM) is a Variant of the Traditional Finite Element Method FEM that Makes use of Higher Order Basis Functions (FEM). One of the most Fundamental Numerical Techniques Employed in the Numerical Simulation is the SFEM, which Outperforms...
-
Local buckling of composite channel columns
PublicationThe investigation concerns local buckling of compressed flanges of axially compressed composite channel columns. Cooperation of the member flange and web is taken into account here. The buckling mode of the member flange is defined by rotation angle a flange about the line of its connection with the web. The channel column under investigation is made of unidirectional fibre-reinforced laminate. Two approaches to member orthotropic...
-
Inverse modeling for fast design optimization of small-size rat-race couplers incorporating compact cells
PublicationIn the paper, a framework for computationally-efficient design optimization of compact rat-race couplers (RRCs) is discussed. A class of hybrid RRCs with variable operating conditions is investigated, whose size reduction is obtained by replacing ordinary transmission lines with compact microstrip resonant cells (CMRCs). Our approach employs a bottom-up design strategy leading to the development of compact RRCs through rapid design...
-
Current harmonic controller in multiple reference frames for series active power filter integrated with 18-pulse diode rectifier
PublicationThe paper presents the control system and selected results of experimental tests of the AC/DC power converter consisting of an 18-pulse diode rectifier based on coupled reactors and a serial active power filter. Proportional integral controllers with decoupling components are implemented in multiple reference frames for selective line current harmonic suppression. The regulator is provided with a backtracking anti-windup mechanism...
-
Radar Signal Parameters Estimation Using Phase Accelerogram in the Time-Frequency Domain
PublicationRadar signal parameter estimation, in the context of the reconstruction of the received signal in a passive radar utilizing other radars as a source of illumination, is one of the fundamental steps in the signal processing chain in such a device. The task is also a crucial one in electronic reconnaissance systems, e.g. ELINT (Electronic Intelligence) systems. In order to obtain accurate results it is important to measure, estimate...
-
Wave Method for Structural Health Monitoring: Testing Using Full-Scale Shake Table Experiment Data
PublicationAn algorithm of the wave method for structural health monitoring (SHM) is tested and calibrated using shake table experiment data of a full-scale, seven-story, reinforced-concrete building slice. The method is based on monitoring changes in the velocity of waves propagating vertically through the structure, identified by least-squares (LSQ) fit of beam models. The experiment was conducted by a team from the University of California,...
-
Racjonalne projektowanie podpór wiaduktu drogowego
PublicationPosadowienie obiektów mostowych i dróg realizowane jest bardzo często w trudnych warunkach geotechnicznych. Trasy autostrad, dróg ekspresowych i obwodnic miast prowadzi się przez obszary gdzie występują grunty uwarstwione o bardzo zróżnicowanej wytrzymałości i odkształcalności. Projektowanie obiektów inżynierskich i dróg w takich warunkach wymaga zastosowania specjalistycznych technologii i nowoczesnych metod obliczeniowych. Takie...
-
Metoda CPTU w rozpoznaniu geotechnicznym w świetle geomechaniki obliczeniowej
PublicationW analizie licznych problemów geotechnicznych, takich jak np. osiadanie i nośność graniczna fundamentów, stateczność skarp i wykopów czy deformacje zapór ziemnych, posługujemy się najczęściej programami komputerowymi, które rozwiązują zagadnienia brzegowo-początkowe równowagi ciała stałego wykorzystując numeryczne narzędzia jakim najczęściej jest metoda elementów skończonych.Dzisiaj każdy projektant wie, że jest to efektywne narzędzie...
-
Aktualizacja modelu teoretycznego Mostu Rędzińskiego na podstawie pomiarów konstrukcji, po 10 latach eksploatacji
PublicationW roku 2020 zrealizowano prace badawcze, które miały na celu ocenę stanu konstrukcji Mostu Rędzińskiego we Wrocławiu po 10 latach eksploatacji. W ramach badań eksperckich wykonano pomiary sił w wantach mostu metodą wibracyjną, dokonano pomiarów geodezyjnych przęseł i pylonu oraz zbudowano model numeryczny. Model posłużył do oceny aktualnego stanu wytężenia elementów konstrukcji. Konieczne było przeprowadzenie aktualizacji pierwotnego...
-
Prognozowanie pracy pali Vibro obciążonych osiowo z wykorzystaniem wyników sondowania CPT.
PublicationW odniesieniu do obecnych trendów optymalnego projektowania obiektów inżynierskich, dąży sie do określania rzeczywistych wartości współoddziaływania podłoża gruntowego i konstrukcji. Pale Vibro należą do grupy pali przemieszczeniowych z poszerzoną podstawą, charakteryzują się bardzo dużą nośnością, szczególnie w gruntach niespoistych. Próbne obciążenia statyczne (SPLT) wskazują, że nośność pali Vibro...
-
General Genetics, I stopień Biotechnologia
e-Learning CoursesCelem wykładu będzie zapoznanie Studentów z najważniejszymi odkryciami, prawami i terminami genetyki. Wykład będzie obejmował kluczowe zagadnienia genetyki: zasady dziedziczenia cech i chorób, mechanizmy regulacji ekspresji genów i mechanizmy zmienności genetycznej. Wykład będzie kładł duży nacisk na wyjaśnienie, szczególnie istotnego dla biotechnologów, molekularnego podłoża dziedziczności, zmienności genetycznej i regulacji...
-
General Genetics
e-Learning CoursesCelem wykładu będzie zapoznanie Studentów z najważniejszymi odkryciami, prawami i terminami genetyki. Wykład będzie obejmował kluczowe zagadnienia genetyki: zasady dziedziczenia cech i chorób, mechanizmy regulacji ekspresji genów i mechanizmy zmienności genetycznej. Wykład będzie kładł duży nacisk na wyjaśnienie, szczególnie istotnego dla biotechnologów, molekularnego podłoża dziedziczności, zmienności genetycznej i regulacji...
-
Pomiar ryzyka bankowego - propozycja typologii
PublicationW artykule zaproponowano typologię pomiaru ryzyk bankowych. Wyodrębnione kryteria podziału podejść do pomiaru ryzyka to: (1) pomiar bezpośredni/pośredni, (2) pomiar ex post/ex ante, (3) kryterium oparte o składnik ryzyka – częstotliwość, dotkliwość, ekspozycja, całościowa strata, (4) kryterium oparte o parametr rozkładu: pomiar wartości oczekiwanej/przeciętnej, pomiar rozproszenia, pomiar wartości skrajnych. Wśród motywów pomiaru...
-
Coastline change-detection method using remote sensing satellite observation data
PublicationCoastal zones are not only the fundaments for local economics based on trade, shipping and transport services, but also a source of food, energy and resources. Apart from offering diverse opportunities for recreation and tourism, coastal zones provide protection against storms and other meteorological disturbances. Environmental information is also essential because of the direct influence on a country’s maritime zones, which are...
-
Wyznaczanie optymalnej krzywizny toru zwrotnego w rozjazdach dla kolei dużych prędkości na podstawie analizy dynamicznej
PublicationW artykule została przedstawiona analityczna metoda wyznaczania krzywizny toru zwrotnego rozjazdu kolejowego posiadającego na swojej długości odcinki zmiennej krzywizny. Taki rozjazd jest dedykowany w głównym stopniu kolejom dużych prędkości. Rozpatrzono dwa odrębne przypadki obejmujące liniowy przebieg krzywizny oraz przebieg nieliniowy, w postaci wielomianowej. Uzyskane rozwiązania problemu pozwalają na przyjmowanie dowolnych...
-
On local buckling of cold-formed channel members
PublicationThe paper deals with local buckling of the compressed flanges of cold-formed thin-walled channel beams subjected to pure bending or axially compressed columns. Arbitrarily shaped flanges of open cross-sections and the web-flange interactions are taken into account. Buckling deformation of a beam flange is described by displacement related to torsion of the flange about the line of its connection with the web. Total potential energy...
-
Time-domain description of point-source acoustic wavefields as a useful approach in ultrasonic techniques
PublicationIn traditional acoustics, field problems are usually treated in the frequency domain, broadband fields being reduced to superposition of harmonic spectrum components. However, this approach is inherently acausal and it is known that in case of arbitrary signals, the distribution-based, time-domain description can be more effective. The present paper is an attempt to expand the time-domain linear systems formalism onto space problems...
-
Real-time simulator of agricultural biogas plant
PublicationThis article presents a real-time simulator of an agricultural biogas plant. The project contains biogas and biomass circuits simulation, as well as heating circuit simulation with a complete control system and visualization interface of the whole process. The software tool used to simulate the plant work is CFD (Computational Fluid Dynamics), which enables a user to create and test simulation objects based on fundamental physical...
-
Time-Domain Description of Point-Source Acoustic Wavefields as a Useful Approach in Ultrasonic Techniques
PublicationIn traditional acoustics, field problems are usually treated in the frequency domain, broadband fields being reduced to superposition of harmonic spectrum components. However, this approach is inherently acausal and it is known that in case of arbitrary signals, the distribution-based, time-domain description can be more effective. The present paper is an attempt to expand the time-domain linear systems formalism onto space problems...
-
Determination of odour concentration by TD-GC×GC–TOF-MS and field olfactometry techniques
PublicationField olfactometry is one of the sensory techniques used to determine odour concentration, in atmospheric air, directly in emission sources. A two-dimensional gas chromatography with time of flight mass spectrometer (GC×GC–TOF-MS) allows performing the chemical characterization of various groups of chemical compounds, even in complex mixtures. Application of these techniques enabled determination of odour concentration level in...
-
The influence of climate change on the life insurance in the EU: A panel data approach
PublicationThe financial sector, as one of the most sensitive economic sectors, is alert to all trends and changes in the environment. The aim of the article is to study the impact of climate change on the life insurance market using panel data from 28 countries of the European Union (EU) for the last 9 years. This study is based on a panel model, where the amount of premiums under life insurance contracts is defined as a function of the...
-
Failure analysis of a high-speed induction machine driven by a SiC-inverter and operating on a common shaft with a high-speed generator
PublicationDue to ongoing research work, a prototype test rig for testing high-speed motors/generators has been developed. Its design is quite unique as the two high- speed machines share a single shaft with no support bearings between them. A very high maximum operating speed, up to 80,000 rpm, was required. Because of the need to minimise vibration during operation at very high rotational speeds, rolling bearings were used. To eliminate...
-
Functional Safety and Cybersecurity Analysis and Management in Smart Manufacturing Systems
PublicationThis chapter addresses some of the issues of the integrated functional safety and cybersecurity analysis and management with regard to selected references and the functional safety standards: IEC 61508, IEC 61511, ISO 13849-1 and IEC 62061, and a cybersecurity standard IEC 62443 that concerns the industrial automation and control systems. The objective is to mitigate the vulnerability of industrial systems that include the information...
-
Experience-Based Product Inspection Planning for Industry 4.0
PublicationIn this paper we describe how our Smart Virtual Product Development (SVPD) system can be used to enhance product inspection planning. The SVPD system is comprised of three main modules, these being the design knowledge management (DKM) module, the manufacturing capability and process planning (MCAPP) module, and the product inspection planning (PIP) module. Experiential knowledge relating to formal decisional events is collected,...
-
Pyrolysis and Torrefaction—Thermal Treatment of Creosote-Impregnated Railroad Ties as a Method of Utilization
PublicationA fundamental issue of waste management and the rail transport industry is the problem of utilizing used railroad ties. Wooden railroad ties are treated with a preservative, usually creosote. Due to their high toxicity, railroad ties are considered hazardous waste and must be utilized under various directives. It is proposed to utilize the troublesome waste by using the pyrolysis and torrefaction process. The research proves that...
-
Electrical properties of Na2O-CaO-P2O5 glasses doped with SiO2 and Si3N4
PublicationSodium-calcium-phosphate glasses doped with SiO2 or Si3N4 having similar sodium ion concentrations were prepared by melt quenching. The conductivity was measured by impedance spectroscopy under nitrogen atmosphere in a wide frequency range (10 mHz–1 MHz) and wide temperature range (153–473 K). At 36.6 °C, DC conductivities of all glasses vary between 1.1 ∗ 10−12 and 8.9 ∗ 10−12 S cm−1 and have similar activation energies (between...
-
Hydrophobic deep eutectic solvents as “green” extraction media for polycyclic aromatic hydrocarbons in aqueous samples
PublicationThe paper presents novel nonionic and hydrophobic deep eutectic solvents which were synthesized from natural compounds, i.e., thymol, ±camphor, decanoic and 10-undecylenic acids. Fundamental physicochemical properties of the synthesized deep eutectic solvents were determined, followed by their application as extractants in ultrasound-assisted dispersive liquid-liquid microextraction to isolate and enrich polycyclic aromatic hydrocarbons...
-
Buck-Boost Inverters with Symmetrical Passive Four-terminal Networks
PublicationAlternating Voltage Inverters (Converters) supplied by low-voltage sources DC (ex. fuel cell, photovoltaic cell) are most frequently realized on the basis of the three fundamental topologies: a) PWM voltage inverter with boost-converter" system, b) PWM voltage inverter with transformed converter DC/DC in the ,,boost-converter" system, c) PWM current converter. However none of these solutions is claimed to be the best and dominant...
-
The influence of intermolecular correlations on the infrared spectrum of liquid dimethyl sulfoxide
PublicationDimethyl sulfoxide (DMSO) is routinely applied as an excellent, water-miscible solvent and chemical reagent. Some of the most important data concerning its liquid structure were obtained using infrared (IR) spectroscopy. However, the actual extent of intermolecular correlations that connect the isolated monomer spectrum to the IR response of the bulk liquid is poorly studied thus far. Using ab initio molecular dynamics (AIMD) simulations,...
-
Modelling of heat transfer in supercritical pressure recuperators
PublicationIn the paper presented is analysis of convective flow heat transfer at supercritical pressure in channels of heat exchanger working in the thermodynamic cycle. The modelling is based on the division of the flow into three regions, namely the heavy fluid, a two phase flow consisting of the heavy and light fluids and finally the light fluid flow. Modelling is concentrated on the region of simultaneous flow of two fluids divided into...
-
A simplified energy dissipation based model of heat transfer for subcooled flow boiling
PublicationIn the paper a model is presented based on energetic considerations for subcooled flow boiling heat transfer. The model is the extension of authors own model developed earlier for saturated flow boiling and condensation. In the former version of the model we used the heat transfer coefficient for the liquid single-phase as a reference level, due to the lack of the appropriate model for heat transfer coefficient for the subcooled...
-
"Rzemieślnicza sztuka" budowania relacji w strukturach samorządności studenckiej
PublicationArtykuł opisuje rzemieślniczą sztukę budowania relacji partnerskich na polskich uczelniach. W tym celu posłużono się doświadczeniami Politechniki Gdańskiej - opracowano trójkąt relacji partnerskich pod kątem braku relacji partnerskich pomiędzy poszczególnymi grupami relacji uczelnianych: "Obserwując zmiany zachodzące w społeczeństwie można zauważyć, iż wśród ludzi wzrasta świadomość znaczenia dobrych relacji wzajemnych. Trend ten...
-
Budowanie relacji partnerskich
PublicationArtykuł opisuje rzemieślniczą sztukę budowania relacji partnerskich na polskich uczelniach. W tym celu posłużono się doświadczeniami Politechniki Gdańskiej - opracowano trójkąt relacji partnerskich pod kątem braku relacji partnerskich pomiędzy poszczególnymi grupami relacji uczelnianych: "Obserwując zmiany zachodzące w społeczeństwie można zauważyć, iż wśród ludzi wzrasta świadomość znaczenia dobrych relacji wzajemnych. Trend ten...
-
Wybrane aspekty formułowania, implementacji oraz aplikacji 6-parametrowej nieliniowej teorii powłok
Publicationpracy przedstawiono rekapitulację stanu wiedzy w zakresie nieliniowej 6-parametrowej teorii powłok, w której szóstym parametrem jest obrót prostopadły do powierzchni odniesienia powłoki tzw. obrót owinięcia (ang. drilling rotation). Zasadnicze fundamenty teorii 6-parametrowej wynikają z pracy między innymi osób: pierwotnego podejścia E. Reissnera podjętego dalej przez takich badaczy jak A. Libai, J.G. Simmonds, J. Makowski, W....
-
Ocena nośności konstrukcji pylonu Mostu Rędzińskiego po 10 latach eksploatacji. Propozycje działań utrzymaniowych
PublicationPylon mostu podwieszonego jest głównym elementem konstrukcyjnym przenoszącym niemal całe obciążenie z przęseł na fundamenty. W Moście Rędzińskim bardzo ważną rolę w pracy pylonu odgrywa rygiel dolny. Jest to żelbetowy element obciążony rozporem wynikającym z pochylenia nóg pylonu oraz reakcjami z przęseł. Jest zatem silnie rozciąganą i zginaną belką, ekscentrycznie sprężoną. Po ujawnieniu zarysowań w ryglu przystąpiono do kompleksowej...
-
Architekturführer Danzig: Gdansk Sopot Gdynia
PublicationIm Zweiten Weltkrieg bis auf die Grundmauern zerstört, wurde der historische Stadtkern der Hansestadt Danzig als polnisches Gdańsk wiederaufgebaut – ein Paradebeispiel für kritische Rekonstruktion in Polen und zugleich eine bis heute stark umstrittene Entscheidung. Zusammen mit dem mondänen Seebad Sopot und der modernen Hafenstadt Gdynia bildet die Bernsteinstadt eine Metropolregion an der polnischen Ostseeküste: die Dreistadt...
-
Load capacity and serviceability conditions for footbridges made of fibre-reinforced polymer laminates = Warunki nośności i użytkowalności w odniesieniu do kładek z laminatów polimerowych
PublicationThe contribution is focused on derivation of the Ultimate Limit State (ULS) and Serviceability Limit State (SLS) design criteria for footbridges built of fibre-reinforced polymer matrix (FRP) laminates. The ULS design criterion is based on the design guidelines for above-ground, pressure, FRP composite tanks and the Tsai-Wu failure criterion, which is used to predict the onset of FRP laminates damage. The SLS criterion is based...
-
An Innovative Approach to the Forecasting of Energetic Effects While Wood Sawing
PublicationIn the classical approach, energetic effects (cutting forces and cutting power) of wood sawing process are generally calculated on the basis of the specifi c cutting resistance, which is in the case of wood cutting the function of more or less important factors. On the other hand, the cutting forces (power) problem may be tackled with an innovative, up-to-date fundamental analysis of the mechanics of sawing based on modern fracture mechanics....
-
An innovative approach to the forecasting of energetic effects while wood sawing
PublicationIn the classical approach, energetic effects (cutting forces and cutting power) of wood sawing process are generally calculated on the basis of the specific cutting resistance, which is in the case of wood cutting the function of more or less important factors. On the other hand, the cutting forces (power) problem may be tackled with an innovative, up-to-date fundamental analysis of the mechanics of sawing based on modern fracture...
-
Al-Kindi’s “The Real One”: Considerations of a mathematician or of a metaphysician?
PublicationThe aim of the article is to analyze Al-Kindi’s concept of the True (Essential) One and certain additional issues, also taking into account the influence on his position from both classical philosophy and source texts of Islam. In the opening part of the article, Al-Kindi’s innovative approach to the application of mathematics in research in other areas of knowledge is discussed. In the next part,...
-
Commonly Accessible Web Service Platform - Wiki-WS
PublicationWeb Service technology on the basis had to supply complete and reliable system components. Nowadays this technology is commonly used by companies providing results of their work to end users and hiding implementation details. This paper presents a SOA-enabled platform - Wiki-WS - that empowers users to deploy, modify, discover and invoke web services. Moreover it discusses concepts and functionalities of this open source management...
-
Pre-analytical aspects in metabolomics of human biofluids – sample collection, handling, transport, and storage
PublicationMetabolomics is the field of omics research that offers valuable insights into the complex composition of biological samples. It has found wide application in clinical diagnostics, disease investigation, therapy prediction, monitoring of treatment efficiency, drug discovery, or in-depth analysis of sample composition. A suitable study design constitutes the fundamental requirements to ensure robust and reliable results from the...
-
Ipertrofan Revisited—The Proposal of the Complete Stereochemistry of Mepartricin A and B
PublicationBeing a methyl ester of partricin, the mepartricin complex is the active substance of a drug called Ipertrofan (Tricandil), which was proven to be useful in treatment of benign prostatic hyperplasia and chronic nonbacterial prostatitis/chronic pelvic pain syndrome. Nevertheless, no direct structural evidence on the stereochemistry of its components has been presented to date. In this contribution, we have conducted detailed, NMR-driven...
-
Predicting Ice Phenomena in a River Using the Artificial Neural Network and Extreme Gradient Boosting
PublicationForecasting ice phenomena in river systems is of great importance because these phenomena are a fundamental part of the hydrological regime. Due to the stochasticity of ice phenomena, their prediction is a difficult process, especially when data sets are sparse or incomplete. In this study, two machine learning models—Multilayer Perceptron Neural Network (MLPNN) and Extreme Gradient Boosting (XGBoost)—were developed to predict...
-
Spectrum Sensing Based on Hybrid Spectrum Handoff in Cognitive Radio Networks
PublicationThe rapid advancement of wireless communication combined with insufficient spectrum exploitation opens the door for the expansion of novel wireless services. Cognitive radio network (CRN) technology makes it possible to periodically access the open spectrum bands, which in turn improves the effectiveness of CRNs. Spectrum sensing (SS), which allows unauthorized users to locate open spectrum bands, plays a fundamental part in CRNs....
-
Comparison of traditional district heating with low temperature district heating systems featuring organic Rankine cycle and heat pump
PublicationPaper presents a comparison between a traditional district heating system with conventional boilers as a source of heat and electricity purchases from power utilities and a low temperature DH system incorporating the CHP with organic Rankine Cycle providing electricity and local heat pump raising the temperature of the DH fluid to the required temperature in the dwelling, meaning that both heat and electricity are produced within...
-
Electron-impact dissociation of molecular hydrogen: benchmark cross sections
PublicationWe present a joint experimental and theoretical investigation of a fundamental process in atomic and molecular physics: electron impact excitation of molecular hydrogen’s (H2) most dominant transition (X1Σg+ → b3Σu+). Excitation of this state is by far the main channel that causes the dissociation of H2 into H + H atoms at low energies. The Convergent Close-Coupling (CCC) calculations predicted significant, more than factor of...