Filters
total: 1645
displaying 1000 best results Help
Search results for: HYDROTECHNICAL CONSTRUCTIONS
-
Launching of steel bridge girder. Application of nonlinear shell models
PublicationThe paper describes the final technology of launching the steel bridge superstructure. The original technology failed in the first construction stage. Local damage of steel webs caused by plastic buckling stopped the procedure. In the effect of damage a new consulting team was employed to solve the problem and redesign a technology of constructing. The key element of the new solution was developed with great help of non-linear...
-
Research of the changeability of the vessels traffic intensity of inland waterways – case study for Lower Vistula
PublicationThe article presents an analysis of the changeability of traffic intensity of inland waterway vessels in the Vistula Delta. The concept of traffic intensity was defined, traffic flows and disturbances were identified in the studied area. The characteristics of the inland waterway traffic model are presented. The results of the analysis indicate the need to carry out modernization of inland waterways for the needs of inland waterway...
-
Synthesis of 11,12-dihydro benzo[c]phenanthridines via a Pd-catalyzed unusual construction of isocoumarin ring/FeCl3-mediated intramolecular arene-allyl cyclization: First identification of a benzo[c]phenanthridine based PDE4 inhibitor
Publication -
Mariusz Jaczewski dr inż.
People -
Seabed Topography Changes in the Sopot Pier Zone in 2010–2018 Influenced by Tombolo Phenomenon
PublicationBathymetric surveys of the same body of water, performed at regular intervals, apart from updating the geospatial information used to create paper and electronic maps, allow for several additional analyses, including an evaluation of geomorphological changes occurring in the coastal zone. This research is particularly important in places where the shape of the coastal zone has been violently disturbed, including by human activity....
-
Photogrammetric and computerized report on site model in feasibility study of navigability channel on vistula spit
PublicationIn the report the authors present a course of geodesic and geo-computerized works upon realization of feasibility study of navigability channel on Vistula Spit. A procedure of acquiring verification and modeling of data for requirements of a numeric model of a bottom and site has been presented with construction of original software for 3D visualization of the Vistula Spit area. The activities described in the report can be...
-
Construction Management, WILIS, Civil Engineering, sem. I, 2022/2023
e-Learning CoursesTechniques and methods of organization and planning in construction projects - review. Analysis of construction schedule. Ms Project as a construction planning tool.
-
Construction Management, WILIS, Civil Engineering, sem. I, 2023/2024
e-Learning CoursesTechniques and methods of organization and planning in construction projects - review. Analysis of construction schedule. Ms Project as a construction planning tool.
-
Timber - material of the future. Examples of small wooden architecture structures.
PublicationThe aim of this article is to present various types of wood-based products, classified as engineered timber, while specifying the implications of their structural properties for their forms. Timber is used as a construction material due to its fire resistance, good structural characteristics and insulating properties. The advent of new technologies of wood processing and wood-based materials production has converted timber into...
-
OPINIA TECHNICZNA nr 5/PG/hydrotechnika Sprawowanie nadzoru naukowo-technicznego podczas opracowywania projektów obiektów hydrotechnicznych, mostowych i drogowych w ramach realizacji przedsięwzięcia pn. „Budowa drogi wodnej łączącej Zalew Wiślany z Zatoka Gdańską” Opinia nt. rozwiązań technicznych przedstawionych w projekcie wykonawczym przekopu w lokalizacji Nowy Świat -branża hydrotechniczna
PublicationOpinię przygotowano w ramach prowadzonego nadzoru naukowo-technicznego podczas opracowywania projektów obiektów hydrotechnicznych, mostowych i drogowych w ramach realizacji przedsięwzięcia pn. „Budowa drogi wodnej łączącej Zalew Wiślany z Zatoka Gdańską”.
-
OPINIA TECHNICZNA nr 3/PG/hydrotechnika Sprawowanie nadzoru naukowo-technicznego podczas opracowywania projektów obiektów hydrotechnicznych, mostowych i drogowych w ramach realizacji przedsięwzięcia pn. „Budowa drogi wodnej łączącej Zalew Wiślany z Zatoka Gdańską” Opinia nt. rozwiązań technicznych przedstawionych w projekcie budowlanym przekopu w lokalizacji Nowy Świat - branża hydrotechniczna
PublicationOpinię przygotowano w ramach prowadzonego nadzoru naukowo-technicznego podczas opracowywania projektów obiektów hydrotechnicznych, mostowych i drogowych w ramach realizacji przedsięwzięcia pn. „Budowa drogi wodnej łączącej Zalew Wiślany z Zatoka Gdańską”.
-
International Journal of Sustainable Construction Engineering and Technology
Journals -
Experimental Research of an Axial Piston Pump with Displaced Swash Plate Axis of Rotation
PublicationThe article describes the influence of displacement of the swash plate rotation axis on the efficiency of axial piston pumps. The dead space volume was defined as the volume of the working chamber in the extreme position of the piston at the end of the pumping phase and its variability was determined as a function of the position of the axis of rotation of the swash plate and the swing angle of swash plate. The influence of swash...
-
Inventory of the eastern wall of the presbytery of the former Dominican church - St. Mary's Church in Elbląg, stage from 2015.
Open Research DataThe drawing presents an inventory of the eastern wall of the presbytery of the former Dominican church - St. Mary's Church in Elbląg (now Art Gallery: Galeria EL), stage from 2015.The drawing also indicates the original, not overfolded during subsequent conservation and construction works, fragments of walls from 3 medieval stages of construction.
-
Multiacces quantum communication and product higher rank numerical range
PublicationIn the present paper we initiate the study of the product higher rank numerical range. The latter, being a variant of the higher rank numerical range, is a natural tool for study- ing a construction of quantum error correction codes for multiple access channels. We review properties of this set and relate it to other numerical ranges, which were recently introduced in the literature. Further, the concept is applied to the construction...
-
Mosleh Ahmadi PhD Candidate
PeopleMosleh Ahmadi has received his bachelor's and master's degrees from 2011-2015 and 2015-2017, respectively, at Islamic Azad University. He is a member of Iran Construction Engineering Organization in Kurdistan as architectural designer since 2020. His pervious publications are focused on the human perception and experience of movement in the built environment. Currently, he is interested in the impact of the daylight on the built...
-
Inspection of Gas Pipelines Using Magnetic Flux Leakage Technology
PublicationMagnetic non-destructive testing methods can be classified into the earliest methods developed for assessment of steel constructions. One of them is the magnetic flux leakage technology. A measurement of the magnetic flux leakage is quite commonly used for examination of large objects such as tanks and pipelines. Construction of a magnetic flux leakage tool is relatively simple, but a quantitative analysis of recorded data is a...
-
Construction project I
e-Learning CoursesLearning how to prepare building elements, structural design of a single-family house
-
Cold Cracking Of Underwater Wet Welded S355G10+N High Strength Steel
PublicationWater as the welding environment determines some essential problems influencing steel weldability. Underwater welding of high strength steel joints causes increase susceptibility to cold cracking, which is an effect of much faster heat transfer from the weld area and presence of diffusible hydrogen causing increased metal fragility. The paper evaluates the susceptibility to cold cracking of the high strength S355G10+N steel used,...
-
Angular welding distortion - one sided fillet weld
Open Research DataWelding is the basic method of joining ship hull elements during its construction. However, this method of joining structural elements generates shrinks. Shrinks causes deformation of the entire welded structure, both linear and angular. In the shipbuilding industry, there is a tendency to oversize fillet welds, at the design as well as manufacturing...
-
Metody komputerowe w hydrotechnice - Nowy
e-Learning Courses -
High-efficiency mini and micro heat exchangers for dispersed power generation
PublicationTaking into account the dispersed systems technologies and their development, the ORC systems seem to be promising technology amongst various micro-CHP domestic units (electrical power production below 10 kWe), however practical realization of the ORC cycle in a micro-scale is technically challenging. The system consists in devices such as the vapour generation unit (boiler), expansion device and heat exchangers. Each of them should...
-
Stormwater runoff in the urbanized coastal basin of Gdańsk Urbanized basin of Gdańsk
PublicationAnthropopressure strongly affects the primal water cycle. Alternation of the natural basins imposes changes of drainage patterns, reduction of bioretention, infiltration and base flow. As a result the overland flow predominates and greater runoff rates flow into storm water collection systems and reservoirs. Moreover changing climatic conditions increase the frequency of rapid extreme weather events. Infrastructures of urban areas...
-
Latest Achievements in Concrete Structures Three-Dimensional Printing
PublicationWe can hear about three-dimensional printed concrete structures for several years, up to date solutions in this technology allow entire printing settlements of tiny concrete houses. Due to technical limitations, these houses are still small and not very durable, but undoubtedly, this technology is developing. Home printed in three-dimensional technology can be an alternative to modular container buildings implemented in areas affected...
-
2021 Construction management, PG_00042225
e-Learning CoursesThe course consists of several topics in the field of construction management: Construction projects, Project management, Risk management, Quality management, Financial Issues and Cash Flow, HR issues and motivation theories, etc.
-
Construction (A:01652) 2020/2021
e-Learning CoursesDodatkowy kurs dla grupy studentów z ERASMUSA
-
The Impact of Ergonomic Guiding Principles on the Formation of Modern Monumental Art
PublicationCommemoration of historic events is now a commonplace phenomenon both in culture and in academic research. The phenomenon is linked to an increase in the representation of the visualisation of the past in public sphere, which in turn leads to reformulation of monumental art. Modern monuments are often spatial forms consisting both of sculpture installation and bigger constructions. In case of these realisations, the designers,...
-
Airstrip Ground Improvement Works by Blasting Charge Technique and Dredged-Ash Material Mixture
PublicationSoil improvement by blasting charge technique is known in geotechnics as one of the efficient and inexpensive method. It can be used in preparing of underground to found road construction and buildings as well. The technique proves usefulness especially when dynamic load is applied. It is because of non-stiff or rather resilient type soil after improvement. In noncohesive or organic soil, blasting charge...
-
Piotr Grudowski dr hab. inż.
PeopleProfessor Dr hab. Eng. Piotr Grudowski heads the Department of Quality and Commodity Management at the Faculty of Management and Economics of Gdansk University of Technology. In the years 1987-2009 he worked at the Faculty of Mechanical Engineering of the Gdansk University of Technology, where he obtained a doctoral degree in technical sciences in the discipline of construction and operation of machines and he headed the Department...
-
Badanie dynamiki platform pływających morskich turbin wiatrowych z zastosowaniem metod numerycznej mechaniki płynów
PublicationPraca dotyczy badania ruchu platform pływających pod morskie turbiny wiatrowe. Przedstawiono w niej główne metody obliczeń i przedyskutowano ich zastosowanie. Na przykładzie koncepcji konstrukcji 3-kolumnowej platformy typu Spar przedstawiono metodykę wykonywania obliczeń z zastosowaniem programu AQWA opartego na metodzie dyfrakcyjnej, rozszerzonego o współczynniki wynikające z lepkości wyznaczone za pomocą obliczeń RANSE-CFD....
-
Comparative analysis of different numerical models of a steel radial gate
PublicationHydrotechnical structures are important components in water management system and general flooding safety. Their reliability should be ensured since potential damage might lead to catastrophic consequences. Weir gates are considered to be highly vulnerable elements of each hydro power plant, with regard to its dynamic resistance. The aim of the paper is to compare different numerical models and their influence on the results of...
-
Typology, current state and non-destructive testing of timber roof trusses of historic churches in the West Vistula Delta, Poland
PublicationThis paper presents the current state of conservation of historic roof churches located in the Żuławy of Gdańsk (Poland). It also describes the architecture of these temples, the region itself and old carpentry techniques for constructing roof trusses. Interdisciplinary tests were carried out in six churches. The geometry of the load bearing structures, the moisture content and the carpentry technique were specified. The field...
-
Virtual Engineering Objects: Effective Way of Knowledge Representation and Decision Making
PublicationThis paper presents a knowledge representation case study by constructing Decisional DNA of engineering objects. Decisional DNA, as a knowledge representation structure not only offers great possibilities on gathering explicit knowledge of formal decision events but also it is a powerful tool for decision-making process. The concept of Virtual engineering Object (VEO), which is a knowledge and experience representation of engineering...
-
Analiza kosztów i czasu budowy domu jednorodzinnego w technologii drewna krzyżowo klejonego CLT
Publication-
-
Construction project II 2023/2024
e-Learning CoursesBasic types of building structures, subdivision, definitions.Basic issues related to reinforced concrete and masonry structures.Pre-design work.Architectural and building design.Selected issues of fire safety regulations.Finishing work.Building elements e.g. stairs, façade systems and claddings, glazed walls, curtain walls, suspended ceilings, floors and flooring.suspended ceilings, floors and flooring, etc.Relationships between...
-
Modern Technologies in Construction 2023/24
e-Learning Courses -
Energy Systems Stations, PG_00042106, W, PE-ET, sem.7, winter 2023/24
e-Learning CoursesConstruction and operation of energy systems, based on the example of the ship power plant.
-
Patryk Ziółkowski dr inż.
PeoplePatryk Ziolkowski is a graduate of the Faculty of Civil and Environmental Engineering at the Gdansk University of Technology, specializing in Building and Engineering Structures. He works as an Assistant Professor at the Department of Engineering Structures. He participated in international projects, including projects for the Ministry of Transportation of the State of Alabama (2015), he is also the winner of a grant from the Kosciuszko...
-
Mechanical-Level Hardware-In-The-Loop and Simulation in Validation Testing of Prototype Tower Crane Drives
PublicationIn this paper, the static and dynamic simulations, and mechanical-level Hardware-In-the-Loop (MHIL) laboratory testing methodology of prototype drive systems with energy-saving permanent-magnet electric motors, intended for use in modern construction cranes is proposed and described. This research was aimed at designing and constructing a new type of tower crane by Krupiński Cranes Company. The described research stage was necessary...
-
Likwidacja suchego doku przy Nabrzeżu Przemysłowym w Porcie Gdańsk
PublicationW niniejszej pracy przedstawiono problemy techniczne związane z likwidacją dużego obiektu hydrotechnicznego, stanowiącego utrudnienie nawigacyjne w intensywnie eksploatowanym portowym kanale dostępowym w Porcie Gdańsk. Dwukomorowy dok zlokalizowany przy Nabrzeżu Przemysłowym wybudowano w latach 1970-1972. Komory dokowe służyły do budowy żelbetowych, pływających skrzyń falochronowych, na potrzeby budowanego w tym czasie Portu Północnego....
-
Bulilding structures and technologies III
e-Learning CoursesLearning about technical issues related to the implementation of a construction project and a technical project.
-
Anisotropy and compaction gradient assessment on rammed earth specimens through sonic tomography approach
PublicationRammed earth is a traditional construction technique that has recently gained attention because of its benefits from an ecological perspective. The conservation of the existing valuable cultural heritage sites and the quality control of new constructions built with this material require the development and application of practical inspection techniques. This paper explores the application of sonic tests and sonic tomography as...
-
The experimental results of sorption cycles
Open Research DataExperimental studies of sorption cycles were carried out using a prototype research stand, which is a laboratory-scale model of an adsorption chiller. The Intensified Heat Transfer Adsorption Bed (IHTAB) reactor is adapted to the analysis and optimization of various parameters of adsorption systems, e.g., constructions and compositions of adsorption...
-
Building structures and technologies I / CONSTRUCTION PROJECT II
e-Learning CoursesLearning about the technical issues involved in carrying out a construction project / architectural project.
-
Modernization and adaptation of historical interiors
PublicationModernization of the historical building's interior entails the need to take many decisions, often conflicting. Operational requirements, protection of the architectural heritage, fire-safety recommendations, construction regulations, all these aspects involve a whole set of problems that require a rational solution, respecting ambient architectural and historical value, as well as the needs arising from the planned transformation....
-
Sidrish Zahra
PeopleSidrish Zahra received her B.Sc. degree in Electrical (Telecommunication) Engineering from school of Electrical Engineering, Government College University Faisalabad (GCUF), Pakistan in 2016.Then, she received the M.S. degree in School of Information and Communication Engineering, University of Electronic Science & Technology of China (UESTC) in 2019. Now, She is pursuing her Ph.D. degree in Control, Electrical and Electronics...
-
Construction Project III (BSc 2022/2023)
e-Learning CoursesKurs przeznaczony dla Studentów Wydziału Architektury (5 sem. inż.). Na zajęciach Studenci poznają podstawy projektowania konstrukcji metalowych, samodzielnie zaprojektują elementy konstrukcyjne.
-
Construction Project III (BSc 2023/2024)
e-Learning CoursesKurs ma na celu zapoznania studentów 5 sem. Wydziału Architektury z podstawami projektowania konstrukcji.
-
The most popular fields of study at full-time first-cycle studies and uniform master's studies in 2010/2011
Open Research DataUniversities try to adjust their didactic offer to the preferences of university candidates and the market situation. The socio-economic changes of the transformation period meant that specialists in the field of the market economy were in demand on the labor market. Subsequently, at universities, such fields as: "Management" or "Pedagogy" are ranked...
-
Structure of the SME sector by economy sectors in Poland and the EU-28
Open Research DataEurostat data show that almost 75% of SMEs in Poland are trade and services, and every seventh enterprise conducts activities related to construction, and every eight - in industry. Comparing the industry structure of Polish companies with the structure of enterprises operating in EU countries, it should be noted that we are characterized by a greater...