Wyszukiwarka
Wyniki wyszukiwania dla: SILICATED
-
SILICATES INDUSTRIELS
Czasopisma -
Ionic conductivity in bismuth silicate glasses.
PublikacjaZbadano właściwości elektryczne szkieł krzemianowo- bizmutowych zawierających 55 mol% tlenku bizmutu. Uzyskane wyniki potwierdzają jonowy charakter przewodnictwa, za które odpowiedzialne są jony tlenu.
-
Microwave-assisted preparation of potato starch silicated with silicic acid
PublikacjaApplication of microwave irradiation for the silication of granular potato starch with silicic acid, and the properties of silicated starch were investigated. Potato starch was esterified on 20 min microwave irradiation of starch with silicic acid, applying the power of 450 or 800Wand, for comparison, on 120 min convectional heating of the reagent blend at 100 ◦C. The degree of esterification and the reaction efficiency did not...
-
Improvement of photocatalytic activity of silicate paints by removal of K2SO4
Publikacja -
Bismuth germanate and bismuth silicate glasses in cryogenic detectors.
PublikacjaStwierdzono, że przewodnictwo elektryczne redukowanych szkieł silnie zależy od temperatury, czasu reakcji i koncentracji Bi. Zależność przewodnictwa elektrycznego od temperatury jest dobrze opisana przez funkcję ĺ~exp[-(T0/T)n,gdzie n=1/4. Współczynnik emisji wtórnej elektronów jest praktycznie niezależny od stopnia redukcji ale znacznie rośnie po domieszkowaniu szkieł alkalicznymi jonami. Badania dowiodły, że modyfikowane...
-
Ionic conductivity of bismuth silicate and bismuth germanate glasses.
PublikacjaPrzedstawiono wyniki badań przewodnictwa d.c i a.c. szkieł BixGe1-xO2-0.5x (gdzie x=0.13, 0.23, 0.33, 0.47) i BixSi1-xO2-0.5x (gdzie x=0.47, 0.57, 0.67). Wyniki sugerują, że przewodnictwo elektryczne jest zdeterminowane ruchem jonów tlenu. Znaczący wzrost przewodnictwa elektrycznego przy x> 0.33 został wytłumaczony na podstawie faz perkolacyjnego modelu ruchu jonów w podsieci BiO5-6.
-
Evaluation of dampness-induced strength reduction of calcium silicate blocks
Publikacja -
Rigid polyurethane foams modified with selected layered silicate nanofillers
PublikacjaThe aim of this study was to investigate the effect of three different nanofillers on the properties of rigid polyurethane foams, which were prepared by a one-step, laboratory-scale method from a two-component system at the ratio of NCO groups to OH groups equaled to 2. The reaction mixture consisted of the proper amounts of the commercial oligoether polyol, catalysts, water, nanoclays, and polymeric diphenylmethane diisocyanate....
-
Characterization of structural, thermal and mechanical properties of bismuth silicate glasses
Publikacjahe influence of heating and reduction processes on the structural, thermal and mechanical properties of bismuth-silicate glasses has been investigated. Two compositions of glasses: 40Bi2O3–60SiO2 (Bi0.57Si0.43Ox) and 27Bi2O3–73SiO2 (Bi0.43Si0.57Ox) were fabricated by a typical melt quenching technique. Then the reduction in hydrogen at 380 °C for 20, 42 or 67 h was performed. It was found that a 50 μm-thick layer was formed on...
-
The influence of Be addition on the structure and thermal properties of alkali-silicate glasses
PublikacjaBe-Na-(Li)-Si oxide glasses containing up to 15 mol% of BeO were prepared. Their structure was characterized by X-ray powder diffraction and Raman as well as infrared spectroscopic techniques, while their chemical compositions were examined by Inductively Coupled Plasma Optical Emission Spectrometry. All materials were found to be amorphous and contain Al contaminations from minor dissolution of the alumina crucibles. The results...
-
Effect of short time reduction on electrical properties of bismuth-silicate glasses
PublikacjaPodczas krótkiego wygrzewania szkieł bizmutowo-krzemianowych w wodorze (około 5 min w 375C) przewodnictwo powierzchniowe wzrasta o kilka rzędów wartości. Nośnikiem ładunku w tych próbkach jest hopping elektronowy między zlokalizowanymi stanami w badanej warstwie krzemu, zawierającej małe klastry Bi. Wpływ granul bizmutu na przewodnictwo jest widoczny w drugim stadium redukcji, które zachodzi po redukcji dłuższej niż 4h.
-
The oxidation of limonene at raised pressure and over the various titanium-silicate catalysts
Publikacja -
EXAFS analysis of bismuth atom neighbourhood in reduced bismuth silicate glass
PublikacjaPraca zawiera wyniki strukturalnej analizy EXAFS niemodyfikowanego szkła bizmutowo-krzemianowego o składzie 0.4Bi2O3 0.6SiO2 oraz jego modyfikowanych w atmosferze gorącego wodoru form. Przedstawiono wpływ czasu redukcji na strukturę rozważanego szkła. Wyniki wskazują na silną tendencję do aglomeracji neutralnych atomów bizmutu w metaliczne nanostruktury.
-
Niobate in silicate and phosphate glasses: Effect of glass basicity on crucible dissolution
PublikacjaUsing niobium crucibles for melting phosphate and silicate glasses of various modifier oxide contents, and therefore varying optical basicity (Λ), was found to result in varying dissolution rates of niobate during melting. Because of their high electronic polarizability, even small concentrations of niobates are detectable in the Raman spectra of glasses. Even less than 1 mol% Nb2O5 can be identified, as independently confirmed...
-
Epitoanyag-Journal of Silicate Based and Composite Materials
Czasopisma -
The effects of calcium–silicate–hydrate (C–S–H) seeds on reference microorganisms
Publikacja -
Structural studies and melting of bismuth nanocrystals in reduced bismuthgermanate and bismuth silicate glasses.
PublikacjaOtrzymano nanostruktury krystalicznego bizmutu w matrycy XO2 (X=Si,Ge) oraz warstwę nanostruktur krystalicznego bizmutu na powierzchni redukowanych w atmosferze wodoru szkieł Bi0.33Ge0.67O1.84 i Bi0.57Si0.43O1.72. Kompozyt Bi-szkło badano metodą DSC, XRD oraz AFM. Zaobserwowano zmniejszenie temperatury topnienia nanokrystalicznego bizmutu znajdującego się w matrycy szkła z 544 K do 387 K oraz do 502 K w przypadku powierzchniowej...
-
Structure and morphology of hydrogen reduced surface of bismuth germanateand bismuth silicate glasses.
PublikacjaOtrzymano nanostruktury krystalicznego bizmutu w matrycy XO2(X=Si,Ge) oraz warstwę nanostruktur krystalicznego bizmutu na powierzchni redukowanych w atmosferze wodoru szkieł Bi0.33Ge0.67O1. i Bi0.57Si0.43O1.72. Zaproponowano prosty model budowy zredukowanych szkieł bizmutowo-germanowych potwierdzony wynikami badań AFM i XRD. Obserwowane zmiany przewodnictwa elektrycznego redukowanych szkieł wyjaśniono na podstawie modelu.
-
Ciliated protozoa in the impact zone of the Uzhgorod treatment plant
PublikacjaThis paper presents the results of studies on the Uzh River (Ukraine, Zakarpattia Oblast) near the effluent point of a sewage treatment plant in Uzhgorod. The samples were taken at various sites of the treatment plant along the stages of purification process, as well as in the river, at a number of different points above and below the wastewater discharge. At each of these objects, the temperature...
-
The bismuth atom neighbourhood in bismuth-silicate glasses from X-ray absorption experiment
PublikacjaPraca zawiera wyniki strukturalnej analizy EXAFS lokalnego otoczenia atomów bizmutu w krystalicznym tlenku bizmutu (odmiana alfa) i w szklach bizmutowo-krzemianowych o składzie xBi2O3 (1-x)SiO2,x=0.3, 0.4, 0.5, 0.6. Analizę XA- FS realizowano w oparciu o metodę GNXAS. Otrzymane wyniki porównano z danymi literaturowym.
-
Ion conduction in beryllium-alumino-silicate glasses doped with sodium or sodium and lithium ions
PublikacjaElectrical properties of beryllium-alumino-silicate glasses containing sodium ions or sodium and lithium ions were studied with impedance spectroscopy technique over a frequency range from 10 mHz to 1 MHz and at temperature range from 213 to 473 K. The frequency- and temperature-dependent conductivity spectra of individual single alkali glasses were superimposed by means of the Summerfield scaling. Mixed-alkali glasses do not overlap...
-
Barium boron aluminum silicate glass system for solid state optical gas sensors
PublikacjaRecent increasing demand for new eco-friendly materials and for low cost fabrication process for use in optical sensors field, raise concern about alternative materials for this application. We have designed two glass-ceramics compositions from the quaternary ROAl2O3- SiO2-B2O3(R=Ba) alkali-earth aluminum silicate system, labeled B72 and B69, with high refractive index (>1.6), large values of Abbe number (94.0 and 53.0, respectively),...
-
Physical and mechanical properties of rigid polyurethane faoms modified with selected flame retardants or layered silicates
PublikacjaW pracy przedstawiono charakterystykę pianek poliuretanowych zawierających klasyczne środki uniepalniające oraz nanonapełniacze z grupy glinokrzemianów warstwowych. Zbadano wpływ zarówno nanonapełniaczy na bazie naturalnego montmorylonitu, jak i modyfikowanych glinokrzemianów. Uzyskane spienione poliuretanowe o zmniejszonej palności charakteryzowano z wykorzystaniem różnych technik badawczych, między innymi wykonano badania DMA,...
-
Moisture Influence on Compressive Strength of Calcium Silicate Masonry Units–Experimental Assessment and Normative Calculations
Publikacja -
Structure and electric conductivity of reduced lead-germanate, bismuth-germanate and bismuth-silicate glasses modified with potassium
PublikacjaZbadano szkła germanianowo-ołowiowe i krzemianowo+bizmutowe. Warstwy metalicznych granul wytwarzano w nich poprzez redukcję powierzchni w atmosferze wodoru. Praca dotyczy wpływu potasu na właściwości szkła. Przeprowadzono badania metodami mikroskopii sił atomowych, DSC oraz pomiary przewodności elektrycznej. Stwierdzono, że obecność potasu poprawia mechaniczne i technologiczne właściwości szkła.
-
Development of an Oxide Layer on Al 6061 Using Plasma Arc Electrolytic Oxidation in Silicate-Based Electrolyte
Publikacja -
Proteolysis in dry-aged loins manufactured with sonicated pork and inoculated withLactobacillus caseiŁOCK 0900 probiotic strain
Publikacja -
Third-order nonlinear optical features of zirconia-added lead silicate glass ceramics embedded with Pb2Fe2O5 perovskite crystal phases and role of Fe ions
Publikacja -
Linear and nonlinear impedance of iron containing silicate glasses
Dane BadawczeThe linear and nonlinear impedance ofglasses doped with iron oxide were measured. Glass samples (50 SiO2-50-xPbO-xFe2O3 in mol%) were prepared by the conventional melt quenching technique. The substrates were powdered in a mortar and melted in Al2O3 crucibles. The melting was conducted in air at 1623K. The melts were poured out on plate heated up to...
-
The structure of lead-silicate glasses and nanocomposites doped with iron oxide
Dane BadawczeThe structure of iron-doped glasses and glass-ceramics were studied. Samples has the composition of 50SiO2–(50−x)PbO–xFe2O3, where x=15, 20 and 25 (in mol%). All samples were prepared by the conventional melt quenching technique; the melting was conducted in air at 1623 K in alumina crucibles. The melts were poured on a brass plate preheated to 573...
-
The structure of lead-silicate glasses containing nanocrystallites of iron oxides
Dane BadawczeThe structure of iron-doped glasses and glass-ceramics were studied. Samples has the composition of (50 − 0.5x)SiO2–(50 − 0.5x)PbO–xFe2O3, where x = 2, 5, 10, 15, 20 and 25 (in mol%). All samples were prepared by the conventional melt quenching technique; the melting was conducted in air at 1623 K in alumina crucibles. The melts were poured on a brass...
-
The morphology of lead-silicate glasses containing nanocrystallites of iron oxides
Dane BadawczeThe topography of iron-doped glasses and glass-ceramics were studied. Samples has the composition of (50 − 0.5x)SiO2–(50 − 0.5x)PbO–xFe2O3, where x = 2, 5, 10, 15, 20 and 25 (in mol%). All sampleswere prepared by the conventional melt quenching technique; the melting was conducted in air at 1623 K in alumina crucibles. The melts were poured on a brass...
-
The morphology of lead-silicate glasses and nanocomposites doped with iron oxide
Dane BadawczeThe topography of iron-doped glasses and glass-ceramics were studied. Samples has the composition of 50SiO2–(50−x)PbO–xFe2O3, where x=15, 20 and 25 (in mol%). All sampleswere prepared by the conventional melt quenching technique; the melting was conducted in air at 1623 K in alumina crucibles. The melts were poured on a brass plate preheated to 573...
-
Linear and nonlinear impedance of alkali and iron doped silicate-lead glasses
Dane BadawczeLinear and nonlinear impedance was studied for lead-silicate glass samples doped with iron ions and alkaline oxides. The compositions of glasses were as follows: (in %mol) 50% SiO2, 25% PbO, 15% Fe2O3 and 15% one of alkaline oxides: Na2O, K2O, Li2O. All samples were prepared by the conventional melt quenching technique. The substrates were powdered...
-
Magnetic properties of of lead-silicate glasses and nanocomposites doped with iron oxide
Dane BadawczeMagnetic properties of iron-doped glasses and glass-ceramics were studied. Two different sets of glass samples were prepared. The first group of samples has the composition of (50 − 0.5x)SiO2–(50 − 0.5x)PbO– xFe2O3, where x = 15 and 20 (in mol%). Composition of the second group was 50SiO2–(50−x)PbO–xFe2O3, where x=15, 20 and 25 (in mol%). All sampleswere...
-
Electrical properties of silicate-lead glasses containing nanostructures of iron oxides.
Dane BadawczeElectrical properties of silicate-lead glasses doped with different content of iron oxide was studied. The set of glass samples were prepared with the composition of (50 − 0.5x)SiO2–(50 − 0.5x)PbO–xFe2O3, where x = 2, 5, 10, 15, 20 and 25 (in mol%). All sampleswere prepared by the conventional melt quenching technique; the melting was conducted in...
-
Rheology of potato starch chemically modified with microwave-assisted reactions
PublikacjaNative potato starch was sulfated, selenated, borated, silicated and zincatated by means of microwave-assisted reactions with varying doses of relevant reagents. Resulting products were characterized involving rheological behavior of pastes, their weight-average molecular weight (Mw), and radius of gyration (Rg). Most of the pastes showed shear-thinning behavior, with the flow behavior index (n) below unity. The pastes of starch...
-
Electrical properties of nanostructures in lead-silicate glasses and nanocomposites doped with iron oxide
Dane BadawczeElectrical properties of iron oxide nanostructures observed in silicate glasses and glass-ceramics were studied. Two different sets of glass samples were prepared. The first group of samples has the composition of (50 − 0.5x)SiO2–(50 − 0.5x)PbO– xFe2O3, where x = 15, 20 and 25 (in mol%). Composition of the second group was 50SiO2–(50−x)PbO–xFe2O3, where...
-
Kinetics and mechanism of the chemically modified starches during gelatinization.
PublikacjaNative starch was silicated by means of microwave-assisted reactions with varying doses of reagents. Resulting products were characterized by DSC and HMR-relaxation methods. It was observed that the hydratation of the silicated starches during gelatinization decreases when compared to that of the native potato starch. The amount of unfrozen water for ungelitinizated silicated starches are less than in control samples. At the same...
-
Synthesis, structural characterization, and thermal properties of Ca‐ and La‐doped soda‐lime glasses by laser melting
PublikacjaLaser melting techniques have been used in the preparation of unconventional glass compositions with high melting temperatures. Thus, we wanted to test the feasibility of using a CO2 laser in the preparation of nitrogen-rich oxynitride glasses and nitride silicate glasses. Melting from oxides and metallic raw materials, we wanted to study first glass formation and possible evaporation losses of the glass components. Two glass series...
-
Effect of composition on the thermal properties and structure of M-Al-Si-O-N glasses, M = Na, Mg, Ca
PublikacjaThe primary objective of this study is to explore the relationship between the composition, structure, and thermal characteristics of M-Al-Si-O-N glasses, with M representing sodium (Na), magnesium (Mg), or calcium (Ca). The glasses were prepared by melting in a quartz crucible at 1650 °C and AlN precursor (powder) was utilized as a nitrogen source. The measured thermal properties studied were glass transition temperature (Tg),...
-
TMSCl Promoted Acylation of Amines with 5-(α-amino- α'-hydroxy)methylene Meldrum's Acids - Elucidation of Mechanism.
PublikacjaRecently we have observed accelerating influence of trimethyl silyl chloride addition on the rate of the reactions of 5-(α-amino- α'-hydroxy)methylene Meldrum's Acids with amines, particularly in the case of highly basic amines. However the nature of the aforementioned process remain unexplained. In proposed communication we wish to report insightful elucidation of this mechanism. The reaction under investigation involves simply...
-
Aquatic biomass containing porous silica as an anode for lithium ion batteries
PublikacjaA composite electrode was manufactured by pyrolysis of Red Algae (Polysiphonia fucoides) covered by diatoms (Diatomophyceae). Electrodes were tested as a half cell with capacity of 500 mA h g−1 after 80 cycles. XPS analysis shows formation of lithium silicate under reduction of silica in an aprotic electrolyte containing LiPF6 salt.
-
Influence of silver nanoparticles addition on antibacterial properties of PEO coatings formed on magnesium
PublikacjaMagnesium is a biodegradable material and thus could be a choice for bone fixation devices and implants with a specific purpose. This study aims to enhance the anti-corrosive, biocompatible, and antibacterial properties on magnesium-based materials through ceramic coatings formation. To achieve this the silicate-based electrolyte was used to create of Plasma Electrolytic Oxidation (PEO) coatings. During investigation the bioactive...
-
Determination of ionic conductivity in the Bi-Si-O and Pb-Si-O glasses
PublikacjaImpedance spectroscopy measurements in various gas atmospheres were carried out in order to explain the doubts about the type of carriers and the mechanism of electrical conductivity in Bi-Si-O and Pb-Si-O glasses. In bismuth silicate glass, a typical ionic conductivity with oxygen ions as charge carriers was observed. The level of electrical conductivity of the glass at 400 °C was 5 × 10−8 S·cm−1 , with the activation energy of...
-
Hydrometeorological and hydrochemical conditions in the Gulf of Gdańsk in the vicinity of Vistula river mouth in July of 1977
Dane BadawczeSome results of the complex measurements in the coastal zone of the Gulf of Gdańsk in the vicinity of the Vistula river mouth are included in this archival data set. The measurements were carried out by Institute of the Oceanography of the University of Gdańsk (IO UG) in July of 1977. The list of parameters includes wind direction and speed, Secchi...
-
IR and Raman study of oxy-nitride glasses
PublikacjaVarious silicate and phosphate glasses with and without nitride addition were structurally characterized by IR and Raman spectroscopy. The studied glass systems include Na-Ca-P-O-N (1), AE-Si-O-N (with AE=Mg, Ca, Sr, Ba)(2), La-Si-O-N (3) as well as the Na-(Li)-Be-O-(N) (4,5) system. The samples were prepared by different techniques such as remelting of pre-prepared glass samples of the oxide systems with Mg and/or Si3N4 powders...
-
TEM and EDX study of the Al2O3 ultra thin films
Dane BadawczeThe ultra-thin layers of Al2O3 were deposited on a silicon substrates. The method of atomic layer deposition (Beneq TFS 200 ALD system) was chosen as the proper method of dielectric layer deposition. This method provides precise thickness control down to a single atomic layer. The precursors used were trimethylaluminum (Sigma-Aldrich) and purified water....
-
Coatings in arthroplasty [online]
PublikacjaThe modern coatings used in arthroplasty for long term implants are reviewed. The phosphate coatingsare the most popular technique to improve the bone-implant interfacial strength and promote theosseointegration. The plasma spraying, electrophoretic precipitation, powder metallurgy, ion beamsputtering, high velocity oxy-fuel (HVOF) combustion spraying, sol-gel technique, biomimeticdeposition are mostly used to obtain the phosphate,...
-
Preparation and characterization of rigid polyurethane-polyglycerolnanocomposite foams
PublikacjaThis work reports on the preparation of polyurethane-polyisocyanurate (PUR-PIR) foams containing different polyglycerols and layered silicate nanoclays. The rigid polyurethane foams were obtained in a laboratory scale, in a single step method, from a two-component system with a NCO to OH groups ratio equal to two. The reaction mixture consisted of the proper amounts of a commercial oligoetherpolyol, polyglycerol, catalysts, water,...