Search
Filters
total: 789
filtered: 256
Search results for: pipelines, environmental engineering, controlled drilling
-
Analysis of the Application of Horizontal Directional Drilling
PublicationConstruction works are often considered to be very intrusive for the environment. Project designers assume deep excavations, or a complete replacement of the ground within the investment, which sometimes changes the initial conditions drastically. The problem started to appear in places, where the terrain is complicated and the excavation is burdensome. Some of state authorities...
-
LDFEM analysis of FDP auger installation in cohesive soil
PublicationThis paper deals with large deformation finite element (LDFE) preliminary modelling of Full Displacement Pile (FDP) installation in cohesive soil deposit located in Jazowa, Poland. The detailed FDP auger geometry is applied and the drilling process is modelled with full 3D Coupled Eulerian-Lagrangian (CEL) formulation. The total stress approach and elastic-perfectly plastic model with rate-dependent Mises plasticity is used. The...
-
METHODS OF TEACHING NOISE PROTECTION AT ENVIRONMENTAL ENGINEERING
PublicationNoise strongly influences both our health and behavior in everyday life and as employees or employers. The lost of hearing and other effects of noise on humans result not only in a significant decrease in the quality of life or work efficiency but have also have economic consequences. As noise can be preventable in part by the Environmental Engineers, but it is necessary to introduce them noise issues during their education process....
-
Spatial Modelling in Environmental Analysis and Civil Engineering
PublicationAs can be seen, Spatial Modelling in Environmental Analysis and Civil Engineering applies to a multitude of applications. In an attempt to bring the topic closer to potential readers, the special issue referred to security methods, optimization of calculations, conducting measurements and empirical tests. Each article has made an original contribution to the development of practical science that can be replicated by researchers...
-
Bridging the gap between architectural and environmental engineering education in the context of climate change
PublicationIndicated in this article is the urgent need to adjust architectural education to the challenges triggered by climate change. Although reports on the future scenarios for cities are alarming, documents that set criteria for architectural education do not indicate competencies related to climate change adaptation and mitigation, mainly by avoiding environmental engineering considerations. An immediate answer to this problem could...
-
Environmental Degradation of Engineering Materials & Materials Engineering and Technologies
Publication -
6.2, Engineering structures. [Chapter] 6.2.1, Assessment of the technical condition and repairs to cylindrical tank : 6.2.2, Assessment and repair of underground arterial pipelines : 6.2.4, Assessment and repair of steel chimneys
PublicationJerzy Ziółko opracował następujące fragmenty książki: w rozdziale 6.2. Engineering structures (Obiekty inżynierskie), pkt. 6.2.1 Assessment of the technical condition and repairs to cylindrical tank (Diagnostyka stanu technicznego i naprawy zbiorników walcowych), pkt. 6.2.2 Assessment and repair of underground arterial pipelines (Diagnostyka i naprawy podziemnych rurociągów magistralnych, pkt. 6.2.4 Assessment and repair of steel...
-
Design of knowledge based systems in environmental engineering.
PublicationW pracy omawia się konstrukcję samo narastającego modelu rozmytego zarządzania przedsięwzięciami informatycznymi, stosowanego do wspomagania wytwarzania systemów opartych na wiedzy. Proponowany model służy w szczególności do zarządzania zmianami finansowania i czasu realizacji projektów. Opiera się on na eksperymentalnej regułowej wiedzy, pochodzącej z realizacji zarządzania przedsięwzięciami informatycznymi, na teorii systemów...
-
Design of knowledge-based systems in environmental engineering.
PublicationW pracy omawia się konstrukcję iteracyjnie dostrajającego się modelu rozmytego zarządzania przedsięwzięciami informatycznymi, stosowanego do wspomagania wytwarzania systemów opartych na wiedzy. Proponowany model służy w szczególności do zarządzania zmianami finansowania i czasu realizacji projektów dotyczących m.in. systemów wykorzystywanych w (inżynierii) ochronie środowiska. Struktura tego modelu zasadza się na teorii systemów...
-
Numerical simulations of triaxial test with sand using DEM. Archives of Hydro-Engineering and Environmental
PublicationW artykule przedstawiono wyniki symulacji badania trójosiowego dlamateriałów granulowanych. Obliczenia wykonano przy zastosowaniu metodyDEM. Pokazano wpływ momentów kontaktowych na wytrzymałoć próbki. Zbadanowpływ parametrów mikroskopowych na zachowanie się materiału. Wynikiporównano z doswiadczeniami.
-
Zagrożenia środowiska podczas eksploatacji gazociągów podmorskich = Environmental threats during oparation of subsea gas pipelines
PublicationPrzedstawiono wybrane zagadnienia eksploatacji gazociągów podmorskich, w tym zagrożenia dla rekreacyjnego i gospodarczego korzystania z morza. Uszkodzenie gazociągu podmorskiego jest zazwyczaj spowodowane korozją, działaniami morskimi lub zagrożeniami naturalnymi. W określonych warunkach mogą wytrącić się kryształy hydratów węglowodorów gazowych, co może prowadzić do zablokowania linii przesyłowej
-
EIA in teaching sustainable development and environmental protection in engineering education
PublicationA multifaceted approach in teaching the environmental impact assessment (EIA) as a way to stress the role of environmental education in technical sciences is the focus of this article. The EIA is an example of an effective tool that supports spatial planning in implementing sustainable development. The aim is to present the idea and benefits of a facilitative and collaborative approach in teaching the EIA, stressing the role of...
-
Real and virtual enviromnents in environmental engineering: approaches, models, technologies, and critical issues.
PublicationW pracy scharakteryzowano zagadnienia związane z projektowaniem systemów uwzględniającym ochronę środowiska.
-
ADAPTIVE METHOD FOR THE SOLUTION OF 1D AND 2D ADVECTION-DIFFUSION EQUATIONS USED IN ENVIRONMENTAL ENGINEERING
PublicationThe paper concerns the numerical solution of one-dimensional (1D) and two-dimensional (2D) advection-diffusion equations. For the numerical solution of the 1D advection-diffusion equation a method, originally proposed for solution of the 1D pure advection equation, has been developed. A modified equation analysis carried out for the proposed method allowed increasing of the resulting solution accuracy and consequently, to reduce...
-
Open source learning management systems at civil engineering and environmental department: TeleCAD and Moodle.
PublicationW rozdziale zaprezentowano dwa systemy zarządzania kształceniem, służące do przygotowania i prowadzenia e-kursów. Pierwszy z nich TeleCAD został opracowany w ramach projektu Leonardo da Vinci (1998-2001). Ostanie użycie systemu miało miejsce w roku akademickim 2003/2004 i był on wykorzystany w projekcie CURE (V Program Ramowy, 2003-2006). W roku 2003 dzięki wsparciu projektu Leonardo da Vinci EMDEL (2001-2005) Centrum Edukacji...
-
Research, consulting and educational offer directed to Pomeranian province society in the area of hydro and environmental engineering.
PublicationPrzedstawiono skład osobowy, Laboratoria i Katedry Wydziału zajmujące się tematyką inżynierii wodnej i inżynierii środowiska. Omówiono zakres i tematykę prac i oferty naukowej i dydaktycznej. Podano przykłady zrealizowanych obiektów oraz propozycję współpracy na przyszłość dla województwa pomorskiego.
-
Ontology-Aided Software Engineering
PublicationThis thesis is located between the fields of research on Artificial Intelligence (AI), Knowledge Representation and Reasoning (KRR), Computer-Aided Software Engineering (CASE) and Model Driven Engineering (MDE). The modern offspring of KRR - Description Logic (DL) [Baad03] is considered here as a formalization of the software engineering Methods & Tools. The bridge between the world of formal specification (governed by the mathematics)...
-
Virtual Engineering Objects (VEO): Designing, Developing and Testing Models
PublicationIn this article, the development and implementation of the concept of Virtual Engineering Object (VEO) is described. A VEO is a computerized real world representation of an engineering object. VEO will act as a living representation of the object capable of adding, storing, improving and sharing knowledge through experience, in a way similar to an expert of that object. In this paper, it is shown through test models how the concept...
-
Modeling of Composite Shells in 6-Parameter Nonlinear Theory with Drilling Degree of Freedom
PublicationWithin the framework of a 6-parameter nonlinear shell theory, with strain measures of Cosserat type, constitutive relations are proposed for thin elastic composite shells. The material law is expressed in terms of five engineering constants of classical anisotropic continuum plus an additional parameter accounting for drilling stiffness. The theory allows for unlimited displacements and rotations. A number of examples are presented...
-
THE INFLUENCE OF THE URBAN DESIGN ON THE AIR EXCHANGE IN CITIES. SELECTED PROBLEMS IN POLISH REALITY
PublicationThe progress of the architecture and urbanism raises problems requiring interdisciplinary research conducted with the use of advanced experimental techniques and computer simulation. The fields of this research include aerodynamics, especially in intensively developed area of Environmental Wind Engineering (EWE). Aerodynamic phenomena occurring around buildings have a significant impact on the quality of the climate in the cities....
-
Critical analysis of laboratory measurements and monitoring system of water-pipe network corrosion-case study.
PublicationCase study of corrosion failure of urban water supply system caused by environmental factors was presented. Nowadays corrosion monitoring of water distribution systems is an object of major concern. There is possibility of application broad range of techniques like gravimetric and electrochemical. Both kinds of techniques can be applied in laboratory and field conditions. In many cases researches limit the case analysis to measurements...
-
Analiza porównawcza procesów tłumienia i wygładzania fali ciśnienia w trakcie nieustalonego przepływu w rurociągach wykonanych z różnych materiałów.
PublicationUderzenie hydrauliczne jest uważane za jeden z najważniejszych problemów nieustalonego przepływu w przewodach, dlatego nadal stanowi obiekt badań wielu naukowców. To zagadnienie może być badane na dwóch poziomach: praktycznym i teoretycznym. W artykule zaprezentowane zostały wyniki badań doświadczalnych przeprowadzonych na stanowisku pomiarowym nieustalonego przepływu, funkcjonującym w Laboratorium Hydraulicznym Wydziału Inżynierii...
-
ANALIZA STANU TECHNICZNEGO RUROCIĄGÓW: WODY PRZeMYSŁOWEJ I SOLANKI
PublicationPracę wykonano na zlecenie Przedsiębiorstwa Badawczo-Wdrożeniowego "HYDRO-POMP" Sp. z o.o. ul. Wróblewskiego 19, 93-578 Łódź. Wykonawcą zlecenia jest Politechnika Gdańska, Wydział Chemiczny, Katedra Elektrochemii, Korozji i Inżynierii Materiałowej, 80-233 Gdańsk, ul. G. Narutowicza 11/12. Celem pracy była analiza stanu technicznego i badania dwóch rurociągów: solanki oraz wody przemysłowej. Badania wykonywano w warunkach terenowych...
-
Ontology Engineering Aspects in the Intelligent Systems Development
PublicationThe ontology engineering encompasses both, artificial intelligence methods and software engineering discipline. The paper tries to address a selection of aspects pertaining to development activities such as choice of the environmental framework, functionality description, specification methods and roles definition. Authors refer to the ontology development projects they were involved in.
-
Laboratory research on the influence of swelling clay on the quality of borehole cementing and evaluation of clay-cutting wellbore tool prototype
PublicationSwelling clay phenomenon is frequently observed during oil and gas drilling operations and has a significant impact on the quality of cementing procedure. Certain types of clayey minerals increase their volume in contact with water-based drilling fluids. After drilling is completed, borehole remains unsupported and filled with waterbased drilling fluids for several hours, before a casing string is inserted and secured with cement....
-
Employment of a Nonlinear Adaptive Control System for Improved Control of Dissolved Oxygen in Sequencing Batch Reactor
PublicationA proper control in a complex system, such as Wastewater Treatment Plant (WWTP) with each year is becoming increasingly important. High quality control can minimize an environmental impact as well as reduce operational costs of the WWTP. One of the core issues is providing adequate dissolved oxygen (DO) concetration for microorganisms used in a treatment process. An aeration process of the wastewater realised by an system consisting...
-
Corrosion monitoring as a factor increasing the safety of hydrotechnical infrastructure
PublicationWater distribution systems at KGHM S.A. are of great importance for the efficient production of copper and environmental protection. For failures leading to perforation and leakage, the corrosion processes are responsible. This paper aims to assess corrosion on the basis of the analysis of the exposure of the Hydrotechnical Plant pipelines. To this end, the system of transfer and deposition of post-flotation waste as well as the...
-
Cross-cultural problem of quality
PublicationThe paper, by presenting issues such as variability of reality, quality of life, quality and environmental management systems, emphasizes the opportunities of taking the socially important problem under control by utilization of efficient quality engineering analytical methods.
-
Geo-engineering computer simulation seems attractive but is it the real world?
PublicationCorrect formulation of the differential equation system for equilibriom conditions of subsoil, especially in terms of controlled numerical calculation, is discussed. The problem of solution stability is also considered. The solution of problems, which are ill-posed, have no practical value in the majority of cases and is this way the engineering prognosis can lead to real disaster. The object of this paper is quite relevant if...
-
Physics augmented classification of fNIRS signals
PublicationBackground. Predictive classification favours performance over semantics. In traditional predictive classification pipelines, feature engineering is often oblivious to the underlying phenomena. Hypothesis. In applied domains such as functional Near Infrared Spectroscopy (fNIRS), the exploitation of physical knowledge may improve the discriminative quality of our observation set. Aims. Give exemplary evidence that intervening the...
-
Mathemathical model of radial passive magnetic bearing
PublicationIn the article mathematical radial model of passive magnetic bearings to ocean engineering units has been presented. The units application in underwater thrusters should increase propulsion systems durability and gives lower maintenance costs. The rotor of electric motor is hanging in magnetic field taken from radial passive magnetic bearings. However axial direction maintenance must be controlled with electromagnets and their...
-
A NEW MASTER'S DEGREE PROGRAM IN GEODESY
PublicationFaculty of Civil and Environmental Engineering (WILiS) at Gdansk University of Technology (GUT) offers studies in the fields of Geodesy and Cartography. The bachelor program (7 semesters) was started ten years ago in 2009. It provides the student with the basic skills and knowledge in the fields of surveying, geodesy and more generally geomatics and cartography. It is strongly related to expertise knowledge of civil building (geodetic...
-
The Use of Free Adjustment and Msplit-Estimation for Determination of the Vertical Displacements in Unstable Reference System
PublicationThe problem of the determining of the displacements of engineering objects and their surroundings is the current and important issue in the field of engineering geodesy. Most control measurements are made in relation to reference points (stable points). On the other hand, sometimes it happens that it is not possible perform the measurements with reference to the stable points or identification of stable points is difficult. Therefore,...
-
Importance of model tests in design and operation of watercraft for example CTO
PublicationShip Hydromechanics Division is a specialized research and development department of Ship Design and Research Centre conducting tests and research in the field of hydromechanics, connected with design and operation of ships and other floating structures, in scope of: predictions, numerical analyses, designs of - hull shape optimized with respect to the ship’s functions with the application of modern design tools, screw propellers...
-
Multi-headed chimera states in coupled pendula
PublicationWe discuss the occurrence of the chimera states in the network of coupled, excited by the clock’s mechanisms pendula. We find the patterns of multi-headed chimera states in which pendula clustered in different heads behave differently (oscillate with different frequencies) and create different types of synchronous states (complete or phase synchronization). The mathematical model of the network shows that the observed chimera states...
-
Photogrammetry image-based approach for imperfect structure modelling and FE analysis
PublicationThis study aims to model and analyse imperfect tructures using real measurements, employing photogrammetry technique commonly used in the geodesy. The study highlights the capability of the photogrammetry in aiding the structural analysis of imperfect engineering objects. Firstly, the photogrammetry measurements of a stiffened plate are carried out using a specially designed for the purpose experimental stand. Then, the plate surface...
-
Revision of Biological Methods for Determination of EDC Presence and Their Endocrine Potential
PublicationEndocrine-disrupting compounds (EDC) are chemicals responsible for disturbances in the hormonal balance of organisms. This group of chemicals includes both egzogenic and endogenic substances or their mixtures that impact functioning of natural hormones in organisms. In the available literature one can find information on the application of chromatographic and related techniques in the analysis of environmental samples for detection,...
-
Design and implementation of an illumination system to mimic skyglow at ecosystem level in a large‐scale lake enclosure facility
PublicationLight pollution is an environmental stressor of global extent that is growing exponentially in area and intensity. Artificial skyglow, a form of light pollution with large range, is hypothesized to have environmental impact at ecosystem level. However, testing the impact of skyglow at large scales and in a controlled fashion under in situ conditions has remained elusive so far. Here we present the first experimental setup to mimic...
-
Stormwater runoff in the urbanized coastal basin of Gdańsk Urbanized basin of Gdańsk
PublicationAnthropopressure strongly affects the primal water cycle. Alternation of the natural basins imposes changes of drainage patterns, reduction of bioretention, infiltration and base flow. As a result the overland flow predominates and greater runoff rates flow into storm water collection systems and reservoirs. Moreover changing climatic conditions increase the frequency of rapid extreme weather events. Infrastructures of urban areas...
-
Stormwater and snowmelt runoff storage control and flash flood hazard forecasting in the urbanized coastal basin.
PublicationCity of Gdańsk is located in a coastal region where changing climatic conditions increase the frequency of extreme weather events. Developing urbanization affects the hydrology of natural basins by simplification of the drainage system and reduction of infiltration and base flow. Consequently greater runoff rates flow into storm water collection systems, reservoirs and surrounding water bodies. Not only infrastructures of urban...
-
Landscape, EIA and decision-making. A case study of the Vistula Spit Canal, Poland
PublicationAlthough landscapes are often considered public goods, they frequently receive inadequate attention in Environmental Impact Assessments (EIAs), particularly in Poland. This neglect often leads to visible degradation during investment processes. This article examines the case of the Vistula Spit Canal, currently the largest engineering project under construction in Poland. We analysed whether the conclusions drawn in the EIA report,...
-
Analizy ilości i jakości odpływu wód deszczowych i roztopowych z kontrolowanej zlewni zurbanizowanej
PublicationIstotnym problemem Gdańska staje się bezpieczeństwo ekologiczne związane ze spływami miejskimi odprowadzanymi bezpośrednio do wód powierzchniowych, często akwenów użyteczności publicznej. W latach 2011÷2013, Katedra Hydrotechniki Wydziału Inżynierii Lądowej i Środowiska Politechniki Gdańskiej, we współpracy z Wojewódzkim Funduszem Ochrony Środowiska i Gospodarki Wodnej w Gdańsku oraz Gdańskimi Melioracjami, podjęła się wdrożenia...
-
Future of nature, our future. A preregistered report on future time perspective, social value orientation, and pro-environmental outcomes based on data from Poland and Sweden
PublicationIntroduction: The objective of the study was to examine the role of social value orientation and future time perspective to account for individual differences in pro-environmental behaviors, intentions, and opinions about the link between pro-environmental action and pandemic threat (three separate models) in Polish and Swedish samples expected to differ in rate of pro-environmental behaviors (higher in Sweden). We hypothesized...
-
Airborne wear particle emission from train brake friction materials with different contents of steel and copper fibres
PublicationThis study investigated the influence of the amount of steel and copper fibres in a train brake friction material on the tribological performance, emission intensity and characteristics of airborne wear particles. The particles were generated on a pin-on-disc tribometer under controlled friction and environmental conditions. It was found that the steel fibre results in a more intensive emission of 0.3–10 μm particles compared to...
-
IMPROVING THE QUALITY OF EDUCATION THROUGH THE IMPLEMENTATION OF THE DIPLOMAS AND GROUP PROJECTS DURING ENGINEERING STUDIES IN COOPERATION WITH EMPLOYERS
PublicationThe quality of education is one of the most important factors determining the job opportunity for graduates. The authors present the possibility of carrying out the diplomas in cooperation with employers and institutions interested in employment of students who graduated Gdansk University of Technology, Faculty of Civil and Environmental Engineering and University of Warmia and Mazury, Faculty of Geodesy and Land Management (major:...
-
IMPROVING THE QUALITY OF EDUCATION THROUGH THE IMPLEMENTATION OF THE DIPLOMAS AND GROUP PROJECTS DURING ENGINEERING STUDIES IN COOPERATION WITH EMPLOYERS
PublicationThe quality of education is one of most important factors determining the job opportunity for graduates. The authors present the possibility of carrying out the diplomas in cooperation with employers and institutions interested in employment of students who graduated Gdansk University of Technology, Faculty of Civil and Environmental Engineering and University of Warmia and Mazury, Faculty of Geodesy and Land Management (major:...
-
POLDER AND CITY: SUSTAINING WATER LANDSCAPES ON AN URBAN EDGE
PublicationThe question investigated in this paper is how to maintain the environmental quality of the polder landscape encompassing the city in the condition of urban pressure on this landscape. On the basis of theoretical approaches, historical surveys and introductory study models new ideas are tested on the case study of Gdansk, a city located in the Vistula River delta in northern Poland. Research shows that the city was created as a...
-
Polysaccharides-Based Hybrid Materials for Bio- and Non-Bio Sectors. Edytorial
PublicationThis special edition spotlights the recent research in the design, development, and emerging applications of polysaccharides-based hybrid materials for biotechnological and biomedical purposes. All the articles published in this issue underscore the significance of materials derived from cellulose, alginate, chitosan, starch, and carrageenan for various applications, including enzyme production, encapsulation, targeted drug delivery,...
-
Stateczność i niezawodność pełnomorskich platform wiertniczych
PublicationW pracy przedstawiono wieloletnie doświadczenia Autora w zakresie wybranych aspektów numerycznej analizy pełnomorskich platform wiertniczych, w szczególności stacjonarnych platform stalowych poddanych działaniu fal wiatrowych i wiatru. W opisie zachowania się platform uwzględniono współoddziaływanie trzech ośrodków: materiału konstrukcji, morskich fal wiatrowych i podłoża gruntowego. Przyjęcie do opisu stochastycznych właściwości...
-
Enzyme-linked carbon nanotubes as biocatalytic tools to degrade and mitigate environmental pollutants
PublicationA wide array of organic compounds have been recognized as pollutants of high concern due to their controlled or uncontrolled presence in environmental matrices. The persistent prevalence of diverse organic pollutants, including pharmaceutical compounds, phenolic compounds, synthetic dyes, and other hazardous substances, necessitates robust measures for their practical and sustainable removal from water bodies. Several bioremediation and...