Filters
total: 458
filtered: 391
Search results for: STANDARDS
-
INVESTIGATION INTO INTERFEROMETRIC SONAR SYSTEM ACCURACY
PublicationThe results of the accuracy measurements of phase differencing bathymetric sonar (PDBS) system in shallow waters are presented in the article. The measurement results were compared with the theoretical calculations for sonar system accuracy and international standards for hydrographic surveys. The proposed formulas enable to assess a priori sonar system performance using system quality factor (SQF), which takes into account influence...
-
Smart Cities Concept - Readiness of City Halls as a Measure of Reaching a Smart City Perception
PublicationThe article presents a proposal for a new approach to the assessment of Smart Cities: testing the readiness of city halls to a Smart City. The approach is the result of two-year studies involving ten major city halls. Readiness is compared with the previously used Smart City assessment methods: rankings or ISO standards. The relationship between readiness and organization maturity was also presented. The key role of city halls...
-
Effect of wet Hydrogen Sulfide on Carbon Steels Degradation in Refinery Based on Case Study
PublicationMaterial degradation caused by wet hydrogen sulfide (Wet H2S) is one of the major issues in refineries. Carbon steel is the main construction material used in refineries and is subjected not only to thickness loss but the hydrogen is the major concern. H2S leads to high atomic hydrogen penetration in steel which causes degradation in the form of blistering and/or cracking (HIC/SOHIC) and stress cracking in the area of welds and...
-
Convenient identification of desulfoglucosinolates on the basis of mass spectra obtained during liquid chromatography-diode array-electrospray ionisation mass spectrometry analysis: Method verification for sprouts of different Brassicaceae species extracts
PublicationOver the past decade, glucosinolates (GLs) present in different tissues of Brassicaceae and their breakdown products, especially isothiocyanates formed after myrosinase catalyzed hydrolysis, have been regarded as not only environment friendly biopesticides for controlling soilborne pathogens, but most importantly as promising anticarcinogenic compounds. For these reasons, the identification and quantitative determination of the...
-
Technical and Economic Analysis of the Implementation of Selected Variants of Road Investment
PublicationThe aim of the article is to analyze three variants of modernization and reconstruction of a road intersection, which in practice is the cause of numerous collisions and accidents. Detailed design solutions are presented for them. The aim of the analyses is to indicate an effective solution that, taking into account technical modifications of the road system elements, will ensure the functionality of the road system to the highest...
-
WYMAGANIA STAWIANE LEKKIEJ OBUDOWIE
PublicationW artykule omówiono wymagania stawiane lekkim obudowom. Przywołano odpowiednie normy i rozporządzenia dotyczące zagadnień ogólnobudowlanych i techniczno-użytkowych.
-
Analysis of regulations regarding transport of dangerous goods by road in Poland and in Europe
PublicationThe subject of the article are regulations regarding transport of hazardous materials in road transportation. In Poland, as well as in most European countries, these regulations are mainly governed by the ADR Agreement, which is a supra-national legal act. The article contains an analysis of the mentioned legal act. Despite the fact that the ADR Agreement harmonizes regulations concerning the transport of hazardous materials, there...
-
Dynamic state assessment of the water turbine with the power of 600 kW
PublicationThe article discusses the results of experimental studies to assess the dynamic state of the turbine set with the Kaplan turbine. The dynamic assessment was made on the basis of appropriate standards, based on the measurement results of selected parameters of vibration, which have been measured for several states of the machine load. In addition, we attempted to identify the causes of the increased vibration levels based on the...
-
Depth Determination Accuracy of the Modified Prony Method in a Swath Mapping Application
PublicationThis article presents the performance of the modified Prony method in a swath mapping application. Depth determination accuracy is assessed by processing raw signal acquired by an EdgeTech 6205 swath bathymetry system over flat seafloor. An updated version of the method, proposed previously by the authors, is used to determine the number of signal echoes. The number of signal echoes is essential for performing the low-rank approximation...
-
The influence of position of the post or its absence on the performance of the cable barrier system
PublicationRoad safety barriers are used to increase safety in potentially dangerous places on the roads. They are designed and installed on the roads to prevent any vehicle from getting outside the travelled way or from entering the opposite lane of the road. Barriers, which are used on European roads, have to undergo full scale crash tests according to the EN 1317 standards. Nowadays as a supplement to real crash tests, numerical simulations...
-
Falling accident risk in Poland.
PublicationFor the last few years we observe optimistic tendencies in traffic risk development in Poland - the number of fatalities decreases about 10% per year, bringing Poland closer to European Union standards. Nevertheless in 2001 we observed the unexpected, and bigger than forecasted, fatality reduction. The reason was the economic downturn suffered across the country, resulting in reduced demand for transportation. The danger lies in...
-
Falling accident risk in Poland.
PublicationFor the last few years we observe optimistic tendencies in traffic risk development in Poland the number of fatalities decreases about 10% per year, bringing Poland closer to European Union standards. Nevertheless in 2001 we observed the unexpected, and bigger than forecasted, casualty reduction. The reason was the economic downturn suffered across the country, resulting in reduced demand for transportation. The danger lies in...
-
Semantic technologies based method of collection, processing and sharing information along food chain
PublicationIn the paper the method of collecting, processing and sharing information along food chain is presented. Innovative features of that method result from advantages of data engineering based on semantic technologies. The source to build ontology are standards and regulations related to food production, and data collected in databases owned by food chain participants. It allows food chain information resources can be represented in...
-
Manufacturing collective intelligence by the means of Decisional DNA and virtual engineering objects, process and factory
PublicationEngineering collective intelligence is paramount in current industrial times. This research proposes and presents case studies for collective knowledge structures required in the industry field. Knowledge structures such as Set of Experience and Decisional DNA are extended into more advanced knowledge structures for manufacturing processes. These structures are called Virtual Engineering Object, Virtual Engineering Process and...
-
Acoustics-related aspects of historic interior modernization projects
PublicationThe paper presents three historic interiors in which modernization projects have been carried out having an important impact on their acoustic qualities. Two of the described case studies are positive examples of solving the problem of a natural contradictions between modern technical standards and strict discipline imposed by the heritage conservation system. On the other hand, the effect of neglecting the acoustic needs when...
-
Współczesne metody zapewniania jakości oprogramowania. Od klasyki do zwinności
PublicationKsiążka opisuje problematykę jakości w kontekście metod wytwarzania oprogramowania. Składa się z 22 rozdziałów podzielonych na 6 części: Znaczenie jakości oprogramowania, Podstawowe pojęcia i problemy jakości, Jakość w ujęciu klasycznym, Pomiary jakości, Dokumentacja i normy jakości procesu, Jakość w podejściu zwinnym. Zebrany materiał pokazuje ewolucję podejścia do jakości w klasycznych metodykach wytwarzania (od modelu kaskadowego...
-
Removal of indicator bacteria from treated wastewater using physical and chemical methods. Pilot plant study.
PublicationEven after highly efficient biological processes the effluents from wastewater treatment plants may contain significant number of fecal bacteria, from 104 to 106 CFU/100 mL. Since no standards are set on the bacteriological quality of treated wastewater in Poland the elimination of bacterial contaminants is not a priority in wastewater treatment policy. Thus microbiological hazards become particularly significant in the situation...
-
Botanical and geographical origin characterization of polish honeys by headspace SPME-GCxGC-TOFMS
PublicationVolatile organic compounds (VOCs) composition of Polish honeys obtained from various geographical regions was studied. Headspace solid phase microextraction (HS-SPME) using Divinylbenzene/Carboxen/Polydimethylsiloxane-coated fibers was used in combination with comprehensive two-dimensional gas chromatography-time-of-flight mass spectrometry (GC× GC-TOFMS) because of the complexity of the samples. Acacia, linden, rapeseed, buckwheat...
-
Recent advancements in LC‐MS based analysis of biotoxins: Present and future challenges
PublicationThere has been a rising concern regarding the harmful impact of biotoxins, source of origin, and the determination of the specific type of toxin. With numerous reports on their extensive spread, biotoxins pose a critical challenge to figure out their parent groups, metabolites, and concentration. In that aspect, liquid chromatography‐mass spectrometry (LC‐MS) based analysis paves the way for its accurate identification and quantification....
-
Data fusion of GPS sensors using Particle Kalman Filter for ship dynamic positioning system
PublicationDepending on standards and class, dynamically positioned ships make use of different numbers of redundant sensors to determine current ship position. The paper presents a multi-sensor data fusion algorithm for the dynamic positioning system which allows it to record the proper signal from a number of sensors (GPS receivers). In the research, the Particle Kalman Filter with data fusion was used to estimate the position of the vessel....
-
Analysis of load carrying capacity and destruction mechanism of an intermediate anchorage steel plate for pillar jib crane
PublicationPillar jib cranes are often mounted to existing floors with the use of an intermediate anchorage steel plate instead of using independent foundations, what is shown in the figure. Standards for steel design provide only basic rules for the design of such an intermediate plate. This study presents a simple design approach by using a numerical model in order to analyze different parameters that have significant influence in the anchorage...
-
The Realization of NGN Architecture for ASON/GMPLS Network
PublicationFor the last decades huge efforts of telecommunication,Internet and media organizations have been focusingon creating standards and implementing one common networkdelivering multimedia services - Next Generation Network.One of the technologies which are very likely to beused in NGN transport layer is ASON/GMPLS optical network.The implementation of ASON/GMPLS technology usingopen source software and its results are the subject...
-
COMPARATIVE ANALYSIS OF TRANSPORT ORGANIZATION AND FUNCTIONING OF WATER TRAMS IN GDAŃSK, BYDGOSZCZ AND KRAKÓW
PublicationThe subject of this work is to identify and juxtapose solutions implemented in transport provided by water trams for the following cities: Gdańsk, Bydgoszcz and Kraków. As a result of the conducted analysis of transport factors, the degree of conformity of project objectives to the actual role of the water tram has been determined. It was found that the Kraków Water Tram (also known as Cracow Water Tram) is characterized by the...
-
LOKALIZACJA OBIEKTÓW BUDOWLANYCH W SĄSIEDZTWIE LINII 110 kV
PublicationW artykule omówiono wymagania przepisów w zakresie dopuszczalnych wartości pola elektrycznego i magnetycznego niskiej częstotliwości. Przedstawiono wyniki obliczeń rozkładu pola elektrycznego metodą ładunków stymulowanych i w programie FEMM dla przykładowej lokalizacji obiektu przemysłowego w sąsiedztwie linii 110 kV.
-
Time-current tripping characteristics of RCDs for sinusoidal testing current
PublicationLow-voltage electrical installations are verified initially – before being put into operation, as well as periodically – during their utilization. According to the IEC standards, the scope of the verification includes measurements of both the tripping current and the disconnection time of residual current devices (RCDs). Experiences in RCDs testing show that disconnection times of two or more similar RCDs can be quite different....
-
Considerations of Adaptive Digital Communications in Underwater Acoustic Channel
PublicationDown-link communication (DLC) and air transportable communication (ATAC) buoys as well as autonomous underwater vehicles (AUV) use acoustic links for gathering oceanographic data from underwater monitoring systems. The underwater channel propagation conditions are diverse in nature and require a special adaptive approach to the communication system design. The article presents a methodology for the communication systems design,...
-
On the Importance of Resilience Engineering for Networked Systems in a Changing World
PublicationResilience is featured increasingly often in the media, usually applied to society when faced, for example, with disasters such as flooding and the enormous challenges that the Covid-19 pandemic posed. There are now many resilience-related discussion groups worldwide, and some standards initiatives devoted in particular to city resilience. However, there is relatively little explicit interest in resilience engineering for communication...
-
Corrosion degradation impact on mechanical properties of structural steel
PublicationRecently, extensive research was conducted regarding the impact of corrosion degradation on the mechanical properties of structural steel. Studies show that at the material level, the microstructure is somewhat unchanged due to corrosion degradation. However, the corrosion causes pits and structural surface irregularities that consequently impact the mean stress-strain response of typical coupon specimens subjected to tensile loading....
-
Anti-theft lab security system based on RFID
PublicationThe aim of the project is to design and create an electronic system, which can be used to protect laboratory equipment against theft. The main task of the system is to warn a person responsible for the facilities about any attempts made to steal equipment from a laboratory. In a case of an alarm situation, the system emits a sound signal. The concept of the anti-theft security system based on RFID was developed on the basis of...
-
Shallow Water Experiment of OFDM Underwater Acoustic Communications
PublicationThe large variability of communication properties of underwater acoustic channels, and especially the strongly varying instantaneous conditions in shallow waters, is a challenge for the designers of underwater acoustic communication (UAC) systems. The use of phase modulated signals does not allow reliable data transmission through such a tough communication channel. However, orthogonal frequency-division multiplexing (OFDM), being...
-
Projekt mechanizmu różnicowego do pojazdu samochodowego z zachowaniem wymogów jakościowych ISO/TS 16949
PublicationW artykule przedstawiono proces projektowania mechanizmu różnicowego. Dokonano wyboru koncepcji z pośród istniejących rozwiązań stosowanych obecnie w pojazdach samochodowych. Skupiono się przede wszystkim na przebiegu procesu wykonania prototypu z zachowaniem wymogów i standardów ISO/TS 16949 dla produktu i projektu.
-
Laser-textured cross-hatched surface topography analysis with evaluation of high-frequency measurement noise
PublicationThe precision of surface roughness determination using ISO 25178 parameters relies on various factors that directly impact the measurement process. In industry applications, the contactless roughness measurement reduces data collection time. However, it introduces several potential errors, including those stemming from the environment. One of the main types of errors encountered during topography analysis is measurement noise,...
-
Comparison of Tire Rolling Resistance Measuring Methods for Different Surfaces
PublicationThe rolling resistance of car tires is one of the most important parameters characterizing tires today. This resistance has a very significant contribution to the energy consumption of wheeled vehicles. The climate crisis has forced tire and car manufacturers to place great emphasis on the environmental impact of their products. Paradoxically, the development of electric vehicles has led to an even greater importance of rolling...
-
The occurrence of heavy metals and metal-resistant bacteria in water and bottom sediments of the Straszyn reservoir (Poland)
PublicationThe aim of this study is investigate the distribution of selected heavy metals (zinc, copper, lead, cadmium) and metal-resistant bacteria in water and bottom sediments of drinking water reservoir for Gdańsk (Poland). The research area - Straszyn Lake is a dam reservoir on Radunia river, of the total volume of 3 mln m3. Sediment and water sampling took place between May and October 2013 (eight series). Regarding metal concentration...
-
Effect of the integration into Global Value Chains on the employment contract in Central and Eastern European countries
PublicationResearch background: In the era of globalization, there is a need to address decent work deficits in Global Value Chains (GVCs). The forms of working conditions reveal a broad dispersion of contents. The literature review exposes hardly any Europe-focused research assessing the socioeconomic impact of global production links and going beyond their pure economic effects assessed in terms of employment, productivity or wages. Purpose...
-
Combination of instrumental and qualitative descriptive analysis for evaluation of selected tonic waters quality features
PublicationThe combination of sensory and instrumental analysis was applied for quality assurance of selected tonic waters. The Quantitative Descriptive Analysis (QDA) in terms of fourteen sensory attributes (aroma, astringency, bite, burn, numbing, tongue heaviness, carbonation, mouth coating, sweet taste, sour taste, bitter taste, sweet aftertaste, sour aftertaste, bitter aftertaste) of selected tonic waters was performed by sensory experts....
-
Błędy dotyczące kotwienia w budownictwie
PublicationW artykule zwrócono uwagę na typowe błędy w projektowaniu oraz wykonawstwie systemów kotwienia w budownictwie. Omówiono normowe zalecenia dotyczące obliczeń nietypowych elementów. Przedstawiono kilka przykładów błędnego wykonania kotwienia z rzeczywistej realizacji. Skomentowano rodzaj błędów i ich przyczynę.
-
The importance and availability of marine certified reference materials
PublicationTraceability and reliable results are the two pillars of analytical methods; certified reference materials (CRMs) meet this requirement. ISO 17034:2016 credentials provide brief information on general requirements for the competence of Reference Material Producers (RMPs). The different types of CRMs have been produced in recent years for chemical analysis in food, water, soil, and sediment matrices in recent years. This review...
-
Factors Shaping the Working Environment, Living Conditions and Recreation on Board Ship
PublicationA seagoing ship is a working place, an accommodation space and a recreation area at the same time. Being exposed to harsh physical conditions, it must satisfy different requirements. The human organism and its qualities become a point of reference here; consequently, the functions and spatial arrangement and interiors of a ship must be subordinated to its needs. The organisation of the space in contemporary ships meant for human...
-
Knowledge-based functional safety management using ProSIL software
PublicationIn the article the ProSIL software for computer aided functional safety management is presented. The software consists of three modules for the determination of the required SIL level (ProSILen) and verification of the SIL level (ProSILver). In the ProSIL the calibrated knowledge-based risk graph method for determining the required safety integrity level (SIL) of the safety functions identified in hazard analysis is implemented....
-
DAB vs DAB+ Radio Broadcasting: a Subjective Comparative Study
PublicationIn the age of digital media, delivering high quality content to consumers is one of the most demanding tasks. There exist numerous broadcasting standards, with different pros and cons, and the DAB/DAB (Digital Audio Broadcasting) system is one of the most popular among them. From an engineer’s perspective, efficient resource management under limited bandwidth conditions has always been a challenge. In this paper a subjective quality...
-
Political Parties in the Digital World
PublicationThe aim of this report is to outline how digital technologies and digital media are redefining the way political parties fulfill their role as collective platforms for political participation of citizens, e.g. in relation to the parties’ decision-making processes, communication strategies, funding mechanisms, membership, information sharing, etc. and to highlight the existing international standards and good practices in this area....
-
Analysis of EN 1993-1-6 guidelines about determining amplitudes of equivalent imperfections of steel cylindrical shells subjected to uniform external pressure
PublicationCivil engineering structures should be designed with reference to relevant standards. One of them is a Eurocode 3 standard EN 1993-1-6:2007: Design of steel structures Part 1-6: Strength and Stability of Shell Structures. According to this standard, the value of buckling load can be determined using different approaches: classical hand calculations (stress design) and geometrical and material non-linear analysis of an imperfect...
-
Integrity level verification for safety-related functions
PublicationThis article describes methods for safety integrity level (SIL) verification of safety-related functions with regard to probabilistic criteria given international standards IEC 61508 and IEC 61511. These functions are to be realized using the electrical, electronic and programmable electronic (E/E/PE) systems or safety instrumented systems (SIS). Some methods are proposed for quantitative probabilistic modelling taking into account...
-
A walk Around Gdańsk for Physicists
PublicationI provide a guide to Gdańsk (Danzig) and some of its suburbs, focusing on sites of particular interest to physicists. These include the Town Hall with the old Gdańsk standards of length at its entrance, the solar dial of 1588 on its corner, and its bell tower; the Naturalists Society; the medieval harbor crane; the medieval astronomical clock in St. Mary's Church; the late nineteenth-century lighthouse and time ball; and sites...
-
Supporting Cybersecurity Compliance Assessment of Industrial Automation and Control System Components
PublicationThe chapter presents a case study demonstrating how security requirements of an Industrial Automation and Control System (IACS) component can be represented in a form of Protection Profile that is based on IEC 62443 standards and how compliance assessment of such component can be supported by explicitly representing a conformity argument in a form based on the OMG SACM meta-model. It is also demonstrated how an advanced argument...
-
Implementation of IMS/NGN Transport Stratum Based on the SDN Concept
PublicationThe paper presents the development and verification of software and a testbed aiming to demonstrate the ability of two telecommunication network concepts—Next Generation Network (NGN) and Software-Defined Networking (SDN)—to cooperate. The proposed architecture includes components of the IP Multimedia Subsystem (IMS) in its service stratum and of the SDN (controller and programmable switches) in its transport stratum, providing...
-
Operation, Administration, Maintenance in Carrier Grade Ethernet
PublicationOAM (Operation, Administration and Maintenance) plays a crucial role in carrier networks. OAM functionality ensures that network operators and service providers can maintain the quality of the services they offer. One of its major tasks is the detection of anomalies in the network before they become a problem. This enables network operators and service providers to deliver services that come up to a predetermined level of quality...
-
Preface
PublicationThis special issue of Discussiones Mathematice Graph Theory (DMGT) is dedicated to selected papers presented at the 13th Workshop on Graph Theory: Colourings, Independence and Domination (CID) held on 18-23 September 2009 in Szklarska Poręba, Poland. It continues a series of international workshops: 1993-1997 in Lubiatów, 1998-2001 in Gronów, and 2003-2007 in Karpacz. The meeting was organized by the Faculty of Mathematics, Computer...
-
Numerical analysis of lumbar spine injury during road safety barrier collision
PublicationPurpose: Enhancing road safety is a critical goal worldwide, necessitating the development of clear standards for road safety systems. This study focuses on lumbar spine (L-spine) compression injuries during collisions with concrete road safety barriers (RSBs). It aims to analyze internal forces during impact to understand L-spine injury biomechanics in such accidents. Methods: The research included a literature review, analyzing...