Search results for: 3d modelling
-
Surf Zone Currents in the Coastal Zone of the Southern Baltic Sea – a Modelling Approach
PublicationNearshore currents in a multi-bar non-tidal coastal zone environment located in the Southern Baltic Sea are studied. Spatiotemporal seaward-directed jets – so-called rip currents – are an important part of the nearshore current system. In previous research, Dudkowska et al. (2020) performed an extended modelling experiment to determine the wave conditions that are conducive to the emergence of rip currents. In this paper, the...
-
Spatial Modelling in Environmental Analysis and Civil Engineering
PublicationAs can be seen, Spatial Modelling in Environmental Analysis and Civil Engineering applies to a multitude of applications. In an attempt to bring the topic closer to potential readers, the special issue referred to security methods, optimization of calculations, conducting measurements and empirical tests. Each article has made an original contribution to the development of practical science that can be replicated by researchers...
-
Celebrating 50 years of SWIMs (Salt Water Intrusion Meetings)
PublicationThe Salt Water Intrusion Meetings, or SWIMs, are a series of meetings that focus on seawater intrusion in coastal aquifers and other salinisation processes. 2018 marks the 50th year of the SWIM and the 25th biennial meeting. The SWIM proceedings record half a century of research progress on site characterisation, geophysical and geochemical techniques, variable-density flow, modelling, and water management. The SWIM is positioning...
-
Mathematical Modelling of Drive System with an Elastic Coupling Based on Formal Analogy between the Transmission Shaft and the Electric Transmission Line
PublicationIn the paper, the kinematic structure of the transmission shaft between the driving motor and the working mechanism is studied. The analysis is based on electrical and mechanical similarities. The equivalent circuits, typical for electrical systems, are defined for the transmission shaft concerned. Modelling of the transmission shaft based on a formal analogy between the transmission shaft and the electric transmission line is...
-
Impact of maintenance of floodplains of the Vistula River on high water levels on the section from Włocławek to Toruń
PublicationThis article describes the methodology of hydraulic calculations to estimate the water levels in open channels for steady gradually varied flow. The presented method has been used to analyse the water level on the Vistula River from Włocławek cross-section to Toruń cross-section. The HEC-RAS modelling system has been used for parameterization of the river channel and floodplains, as well as for flow simulation. The results obtained...
-
Experimental and numerical investigations for GPR evaluation of reinforced concrete footbridge
PublicationThe GPR method has increasingly found application in non-destructive testing of reinforced concrete structures. This paper presents the new approach of modelling of the electromagnetic wave propagation for reinforced concrete structures with a complex system of the reinforcement. Simulations of the GPR field were performed on a three-dimensional model of a footbridge using the FDTD method. Numerical maps were compared with results...
-
Trust, Collaborative Culture and Tacit Knowledge Sharing in Project Management–a Relationship Model
PublicationThe aim of this research is to study the relationship between Trust, Collaborative Culture, and Tacit Knowledge Sharing in Project Management as a source of Team Creativity in the context of delivering value through knowledge. For this purpose authors conducted a study of 514 Polish professionals with different functions and experience in managing projects in construction industry. The data collected during the study has been analysed...
-
Modelling of the viscoelastic properties of the technical fabric VALMEX
PublicationThe analysis of the Burgers model used for the constitutive description of the technical fabric VALMEX vis-coelastic behavior is presented. It has revealed that the correctness of the identification depends strongly on the level of the immediate strain taken for calculations. Moreover, it has been proven that the Burgers model can be used for modelling of the viscoelastic properties of the polyester reinforced PVC coated VALMEX...
-
Analytical method of modelling the geometric system of communication route
PublicationThe paper presents a new analytical approach to modelling the curvature of a communication route by making use of differential equations. The method makes it possible to identify both linear and nonlinear curvature. It enables us to join curves of the same or opposite signs of curvature. Solutions of problems for linear change of curvature and selected variants of nonlinear curvature in polynomial and trigonometric form were analyzed....
-
Learning and memory processes in autonomous agents using an intelligent system of decision-making
PublicationThis paper analyzes functions and structures of the memory that is an indispensable part of an Intelligent System of Decision-making (ISD), developed as a universal engine for autonomous robotics. A simplified way of processing and coding information in human cognitive processes is modelled and adopted for the use in autonomous systems. Based on such a knowledge structure, an artificial model of reality representation and a model...
-
Modelling Object Behaviour in a Video Surveillnace System Using Pawlak's Flowgraph
PublicationIn this paper, methodology of acquisition and processing of video streams for the purpose of modelling object behaviour is presented. Multilevel contextual video processing was also mentioned. The Pawlak’s flowgraph is used as a container for the knowledge related to the behaviour of objects in the area supervised by a video surveillance system. Spatio-temporal dependencies in transitions between cameras can be easily changed in...
-
Path Loss Modelling in the Untypical Outdoor Propagation Environments
PublicationIn the paper three ways of path loss modelling in the untypical outdoor environments are presented. The exemplary untypical outdoor environment is analyzed. The investigated environment is characterized, and the measurement campaign are shortly described. The following models have been analyzed: the COST231 Walfisch-Ikegami model, the modified COST231Walfisch-Ikegami model tuned on the basis of empirical data, and the empirical...
-
Neural Networks, Support Vector Machine and Genetic Algorithms for Autonomous Underwater Robot Support
PublicationIn this paper, artificial neural networks, a classification technique called support vector machine and meta-heuristics genetic algorithm have been considered for development in autonomous underwater robots. Artificial neural networks have been used for seabed modelling as well as support vector machine has been applied for the obstacles classification to avoid some collision problems. Moreover, genetic algorithm has been applied...
-
Early Oceanographical Data Collected by the Institute of Oceanography, University of Gdańsk
PublicationThree data sets entitled Water currents in Głębinka Passage in late spring of 1975, Hydrometeorological and hydrochemical conditions in the Gulf of Gdańsk in the vicinity of Vistula river mouth in July of 1977, and Gulf of Gdańsk monitoring conducted by the Institute of Oceanography, University of Gdańsk, in 1981–1994 contain archival field measurement results from the Gulf of Gdańsk (the southern Baltic). The data can be used...
-
Modelling the context of use for Intranet portals design
PublicationIntranet portals in contemporary enterprises affect the way how people work, communicate and build relationships within teams and organizations. Developing high usability in Intranet projects requires analysing context of use and including many additional organizational and cultural factors, normally not present in regular software projects. A modelling framework presented in this paper is useful for analysing context of use for...
-
Application of the distributed transfer function method and the rigid finite element method for modelling of 2-D and 3-D systems
PublicationIn the paper application of the Distributed Transfer Function Method and the Rigid Finite Element Method for modelling of 2-D and 3-D systems is presented. In this method an elastic body is divided into 1-D distributed parameter elements (strips or prisms). The whole body (divided into strips or prism) is described by a set of coupled partial differential equations. Solving this equations in the state space form it is possible...
-
A Method for Optimising the Blade Profile in Kaplan Turbine
PublicationThis paper introduces a method of blade profile optimisation for Kaplan-type turbines, based on modelling the interaction between rotor and stator blades. Rotor and stator blade geometry is described mathematically by means of a midline curve and thickness distribution. Genetic algorithms are then used to find a global optimum that minimises the loss coefficient. This allows for variety of possible blade shapes and configurations....
-
On exact two-dimensional kinematics for the branching shells
PublicationWe construct the two-dimensional (2D) kinematics which is work-conjugate to the exact 2D local equilibrium conditions of the non-linear theory of branching shells. It is shown that the compatible shell displacements consist of the translation vector and rotation tensor fields defined on the regular parts of the shell base surface as well as independently on the singular surface curve modelling the shell branching. Several characteristic...
-
Design of weighted PID controllers for control of the Stewart-Gough platform
PublicationStewart-Gough platform (SGP) is a popular parallel type manipulator that involves a 6 degrees of freedom (DOF) motion. In this paper, the process of mathematical modelling of SGP is presented. Two selected control algorithms that use PID controllers and weighted PID controllers are designed. Both control systems using these algorithms are implemented in MATLAB environment as well as on the actual SGP. Parameters of the controllers...
-
Analysis of economical lighting of highways in the environment of SMOL language
PublicationThe paper puts forward and implements a method of designing and creating a modelling simulation environment for eztensive and complete analysis of economical lighting on highways. From a general design viewpoint, the proposed solution explores the concept of a network description language (SMOL), which has been designed to describe the necessary network functions, mechanisms, and devices; for the purpose of their computer simulation...
-
Learning and memory processes in autonomous agents using an intelligent system of decision-making
PublicationThis paper analyzes functions and structures of the memory that is an indispensable part of an Intelligent System of Decision-making (ISD), developed as a universal engine for autonomous robotics. A simplified way of processing and coding information in human cognitive processes is modelled and adopted for the use in autonomous systems. Based on such a knowledge structure, an artificial model of reality representation and a model...
-
Method of Skeletal System Modelling
PublicationAn original method of skeletal system modelling is presented in detail. Using DICOM images obtained from CT and PET tests, shell models of nine bones were created (humerus, radius, ulna, scapula, clavicle, femur, tibia, fibula, pelvis). Two methods of bone behaviour are also proposed, the first method treating the bone as a solid structure and the second method treating the bone as a complex porous structure. The behaviour of model...
-
Modelling of wastewater treatment plant for monitoring and control purposes by state - space wavelet networks
PublicationMost of industrial processes are nonlinear, not stationary, and dynamical with at least few different time scales in their internal dynamics and hardly measured states. A biological wastewater treatment plant falls into this category. The paper considers modelling such processes for monitorning and control purposes by using State - Space Wavelet Neural Networks (SSWN). The modelling method is illustrated based on bioreactors of...
-
Viscous versus electromagnetic damping – amplification in a neighbourhood of a mechanism singular position
PublicationIn the paper, damping of vibrations are considered and compared in a mechanical and in a electromechanical system. In the system, a continuous beam is considered as the main vibrating element. The compared dissipations methods are based on: viscous dampers and DC generators. To increase the possible damping effectiveness, velocity amplification is proposed, i.e., a mechanism is introduced between the beam and the damping element....
-
Hybrid, Approximate Models of Distributed-Parameter Systems
PublicationThe paper introduces the method of distributed-parameter systems modelling. It enables to obtain low order modal model of the system that experiences Coriolis acceleration component and gyroscopic effect. In such cases, corresponding system equations are non-self-adjoined. To solve this problem modal reduced model is built up for the system without Coriolis acceleration or gyroscopic effect terms. These phenomena are next included...
-
Hybrid Reduced Model of Continuous System
PublicationThe paper introduces an alternative method of modelling and modal reduction of continuous systems. Presented method is a hybrid one. It combines the advantages of modal decomposition method and the rigid finite element method. In the proposed method continuous structure is divided into one-dimensional continuous elements. For each 1D element modal decomposition and reduction is applied. Interactions between substructures are...
-
Interference aware Bluetooth scatternet (Re)configuration algorithm IBLUEREA
PublicationThe paper presents a new algorithm IBLUEREA, which enables reconfiguration of Bluetooth (BT) scatternet to reduce mutual interferences between BT and Wi-Fi (IEEE 802.11b) networks operating on the same area. IBLUEREA makes use of proposed procedure for modelling ISM environment around a given BT scatternet. The mechanism is based on estimation of the probabilities of successful (unsuccessful) frame transmissions. This determination...
-
A Generative Approach to Hull Design for a Small Watercraft
PublicationIn the field of ocean engineering, the task of spatial hull modelling is one of the most complicated problems in ship design. This study presents a procedure applied as a generative approach to the design problems for the hull geometry of small vessels using elements of concurrent design with multi-criteria optimisation processes. Based upon widely available commercial software, an algorithm for the mathematical formulation of...
-
MODELLING OF THE VISCOSITY EFFECT OF HEAVE PLATES FOR FLOATING WIND TURBINES BY HYDRODYNAMIC COEFFICIENTS
PublicationOne of the methods of modelling the movement of floating wind turbines is the use of the diffraction method. However, this method does not take into account the influence of viscosity; therefore, in many cases, it needs to be extended with a matrix of appropriate coefficients. The effect of viscosity causes both the added mass coefficient and the damping coefficient to increase. The determined coefficients were entered into the...
-
Some developments in constitutive modelling of soft clays, Keynote lecture
PublicationPrzedstawiono przegląd najczęściej stosowanych modeli konstytutywnych dla naturalnych gruntów słabonośnych, takich jak: gliny, namuły lub torfy. Skupiono się przede wszystkim na takich elementach charakterystyki mechanicznej gruntów słabonośnych jak: anizotropia, zjawisko pełzania i relaksacji oraz destrukturyzacja. Artykuł jest podsumowaniem 4-letniego projektu badawczego finansowanego w ramach 5 ramowego projektu Unii Europejskiej:...
-
Road safety analysis in Poland using time-series modelling techniques
PublicationA number of international studies argue that there is a correlation between the number of traffic fatalities and the degree of public activity. The studies use the unemployment rate to support that argument. As unemployment grows miles travelled fall, a factor known to affect road safety. This relationship seems to be true for Poland, as well. The model presented in the paper is intended to prove it. It is a structural time-series local...
-
Surface diffusion and cluster formation of gold on the silicon (111)
PublicationPurpose: Investigation of the gold atoms behaviour on the surface of silicon by molecular dynamics simulation method. The studies were performed for the case of one, two and four atoms, as well as incomplete and complete filling of gold atoms on the silicon surface. Design/methodology/approach: Investigations were performed by the method of molecular dynamics simulation using the Large-scale Atomic/Molecular Massively Parallel...
-
REVIEW OF WEATHER FORECAST SERVICES FOR SHIP ROUTING PURPOSES
PublicationWeather data is nowadays used in a variety of navigational and ocean engineering research problems: from the obvious ones like voyage planning and routing of sea-going vessels, through the analysis of stability-related phenomena, to detailed modelling of ships’ manoeuvrability for collision avoidance purposes. Apart from that, weather forecasts are essential for passenger cruises and fishing vessels that want to avoid the risk...
-
Cost‐efficient performance‐driven modelling of multi‐band antennas by variable‐fidelity electromagnetic simulations and customized space mapping
PublicationElectromagnetic (EM) simulations have become an indispensable tool in the design of contemporary antennas. EM‐driven tasks, for example, parametric optimization, entail considerable computational efforts, which may be reduced by employing surrogate models. Yet, data‐driven modelling of antenna characteristics is largely hindered by the curse of dimensionality. This may be addressed using the recently reported domain‐confinement...
-
A three-dimensional periodic beam for vibroacoustic isolation purposes
PublicationThis paper presents results of investigations on a three-dimensional (3-D) isotropic periodic beam. The beam can represent a vibroacoustic isolator of optimised dynamic characteristics in the case of its longitudinal, flexural and torsional behaviour. The optimisation process concerned both the widths as well as the positions of particular frequency band gaps that are present in the frequency spectrum of the beam. Since the dynamic...
-
Techniki Komputerowe - Integracja Procesów Projektowania (2022/2023)
e-Learning CoursesProgram nauczania zapewnia studentom solidne podstawy w BIM (Building Information Modelling) przy użyciu programu Autodesk Revit Architecture. Plan zajęć wprowadza w typowy przepływ pracy projektowej, rozwija umiejętności rozwiązywania problemów podczas tworzenia pełnego modelu 3D BIM i powiązanej z nim dokumentacji architektoniczno-budowlanej. Kurs zawiera następujące zasoby: materiały szkoleniowe online, filmy instruktażowe oraz...
-
Fuzzy regresion approach to road safety analysis at regional level
PublicationRoad safety modelling on regional level of NUTS 2 in the EU is the complex issue and authors of this article indicate this in previous publications. NUTS 2 are basic regions for the application of regional policies (0.8-3 m inhabitants). During multivariate models development they discovered that it is difficult to make regression model well described all regions, even if they are from one country. In the first step Poisson model...
-
Tailoring the electrochemical degradation of iron protected with polypyrrole films for biodegradable cardiovascular stents
PublicationThe degradation of polypyrrole (PPy) coated iron is studied in phosphate buffer saline solution at 37 °C by odd random phase multisine electrochemical impedance spectroscopy (ORP-EIS). PPy is electropolymerized with anti-inflammatory salicylates incorporated in the film, as a drug release system. The modelling of EIS over time provides the quantitative description of the corrosion behaviour of the material. Thus, the reliable...
-
The influence of the thickness, recombination and space charge on the loss of photocurrent in organic semiconductors: an analytical model
PublicationWe propose an analytical model of the photocurrent efficiency dependence on the light intensity in organic semiconductors. The influence of the thickness of sample, space charge effects and recombination of charge on the loss of photocurrent has been considered. We demonstrate that the presented model is the enhancement of an analytical model reported recently by Rappaport et al (2005 J. Appl. Phys. 98 033714). The method to identify...
-
Modelling of Diffusing Capacity Measurement Results in Lung Microangiopathy Patients. A novel Diagnostic Suppport
PublicationLung microangiopathy is a little known negative influence of diabetes mellitus on the functioning of the lungs. The aim of this study is to design a supportive method for diagnosing lung microangiopathy. This will be based on routinely performed pulmonary measurements as well as on investigation process modelling and data processing. A model of the diffusion of oxygen from the alveoli to the blood has been described with a set...
-
FE analysis of support-specimen interaction of compressive experimental test
PublicationThe objective of this work is to investigate the support-specimen interaction during the compressive experimental testing of stiffened plates. The interaction is analyzed employing the nonlinear Finite Element Method using the commercial software ANSYS. The connection between the stiffened plate and testing supports is modelled with the use of contact elements, where several possible interaction scenarios are investigated, and...
-
LDFEM analysis of pore water pressure development in cohesive soil due to FDP auger drilling
PublicationThis paper presents the preliminary modelling of FDP auger drilling in soft soil with emphasis on excess pore water pressure (EPWP) development using CEL formulation and Abaqus software suit. The EPWP generation in single points is investigated and the results of a numerical analysis are compared with the field measurements. It is found that numerical model qualitatively reflects the field measurements. However,...
-
Simulation studies into quayside transport and storage yard operations in container terminals
PublicationThe focus of the paper is on quayside transport and storage yard operations in the sea container terminals. Developed algorithms for solving the issues of load handling and storage space allocation have been applied in the frame of adopted simulation model. The criteria chosen for decision making involved the total makespan of vessel unloading and the utilisation levels of the transportation trucks. Recommendations for unloading...
-
Mechanical properties of the human stomach under uniaxial stress action
PublicationThe aim of this study was to estimate the range of mechanical properties of the human stomach in order to use the collected data in numerical modelling of surgical stapling during resections of the stomach. The biomedical tests were conducted in a self-developed tensile test machine. Twenty-two fresh human stomach specimens were used for the experimental study of its general strength. The specimens were obtained from morbidly obese...
-
Pre-selection and assessment of green organic solvents by clustering chemometric tools
PublicationThe study presents the result of the application of chemometric tools for selection of physicochemical parameters of solvents for predicting missing variables – bioconcentration factors, water-octanol and octanol-air partitioning constants. EPI Suite software was successfully applied to predict missing values for solvents commonly considered as “green”. Values for logBCF, logKOW and logKOA were modelled for 43 rather nonpolar solvents...
-
Hierarchical random models in road transport safety
PublicationIn this paper multilevel approach to the issue of road safety level on the road network of European regions, classified as NUTS 2 in statistical databases of the EU, has been presented. The risk calculated as the number of death casualties in road accidents per 100,000 inhabitants of a given region has Poisson distribution. Therefore, generalized Poisson model has been assumed in the modelling process. Multilevel stochastic analysis...
-
Knowledge-Grid Modelling for Academic Purposes
PublicationNowadays, we face a huge amount of data and information sharing on the Web by different users worldwide. A multidimensional perspective in describing a university ontology seems to be very important for the modelling of higher education resources. This paper proposes a multi-dimensional knowledge model, designed to distribute and manage knowledge resources efficiently. We propose our model as the foundation of an advanced knowledge...
-
Long-term Hindcast Simulation of Currents, Sea Level, Water Temperature and Salinity in the Baltic Sea
PublicationThis dataset contains the results of numerical modelling of currents, sea level, water temperature and salinity over a period of 50 years (1958–2007) in the Baltic Sea. A long-term hindcast simulation was performed using a three-dimensional hydrodynamic model (PM3D) based on the Princeton Ocean Model (POM). The spatial resolution was 3 nautical miles, i.e. about 5.5 km. Currents, water temperature, and salinity were recorded...
-
Software tool for modelling of mechatronic systems with elastic continua
PublicationThe paper presents a systematic computational package for modelling and analysis of complex systems composed of multiple lumped and distributed parameter subsystems. The constructed computer program enables the frequency domain analysis of a class of linear systems and to obtain reduced order model in the form of bond graph. Obtained modal bond graph can be directly exported into 20-Sim package to further processing including nonlinear...
-
Spirometry measurement model - the diagnostic purpose support
Publicationthe paper presents a new model of respiratory mechanism based on the spirometry measurements. the spirometry test assesses the efficiency of the lung ventilation. the respiratory system functioning is based on the ventilation mechanism. thus the quality of the lung depends on the quality of lung ventilation. modelling of the respiratory system supports a diagnostic process. the model parameter estimates are obtained on the basis...