Search results for: 5D PRINTING
-
Cure kinetics of epoxy/MWCNTs nanocomposites: Isothermal calorimetric and rheological analyses
PublicationA combinatorial route has been applied in cure kinetics study of epoxy nanocomposites containing multi-walled carbon nanotubes (MWCNTs) based on differential scanning calorimetry and rheokinetic analyses under isothermal conditions. Pristine and amine-modified MWCNTs bearing primary and secondary amines were used at very low concentrations (0.1 and 0.3 wt.% based on epoxy weight). Model-free and model-fitting methods were applied...
-
Technical Writing 2
e-Learning CoursesZapraszam na semestralny internetowy kurs pisania tekstów technicznych w języku angielskim, który zacznie się .......... Informacje i zapisy: dr Iwona Mokwa-Tarnowska imtarn@pg.gda.pl
-
Fluctuation-Enhanced Sensing of Organic Vapors by Ink-Printed MoS2 Devices under UV Irradiation
PublicationThis work presents the results of fluctuationenhanced sensing (FES) of selected organic gases by MoS2 sensor fabricated via a simple ink printing method. We demonstrate that low-frequency noise measured under UV irradiation (275 nm) is more sensitive to different gases than measured in the dark. The noise at 1 Hz under UV light increased 3.3, 3.5, 1.6, and 2.9 times for chloroform, tetrahydrofuran, acetonitrile, and acetone ambiances, respectively....
-
Spray deposited carbon nanotubes counter electrodes for dye-sensitized solar cells
PublicationCarbon nanotubes due to their catalytic properties are a promising alternative to platinum counter electrodes (CE) for dye-sensitized solar cells (DSSC). In this study, counter electrodes were made from double-walled carbon nanotube (DWCNT) ink using the spray printing technique and afterwards thermally treated at temperatures ranging from 120 to 300 °C. Morphology and structure was studied using scanning electron microscopy and...
-
Spray-deposited carbon-nanotube counter-electrodes for dye-sensitized solar cells
PublicationCarbon nanotubes due to their catalytic properties are a promising alternative to platinum counter electrodes (CE) for dye-sensitized solar cells (DSSC). In this study, counter electrodes were made from double-walled carbon nanotube (DWCNT) ink using the spray printing technique and afterwards they were thermally treated at temperatures ranging from 120 to 300 °C. Morphology and structure was studied using scanning electron microscopy...
-
A novel method of creating thermoplastic chitosan blends to produce cell scaffolds by FDM additive manufacturing
PublicationDue to its remarkable and promising biological and structural properties, chitosan has been widely studied in several potential applications in the biomedical sector. Attempts are being made to use this polymer and its properties in thermoplastics dedicated to 3D printing in FDM technology. However, chitosan can be processed only from acid solution, which limits its applications. The paper presents a new path for the production...
-
Polyurethanes
PublicationHandbook of Thermoset Plastics, Fourth Edition provides complete coverage of the chemical processes, manufacturing techniques and design properties of each polymer, along with its applications. This new edition has been expanded to include the latest developments in the field, with new chapters on radiation curing, biological adhesives, vitrimers, and 3D printing. This detailed handbook considers the practical implications of using...
-
Three-dimensional printed trachea helps to design tailored treatment for tracheobronchomalacia
PublicationTracheobronchomalacia is a rare respiratory disease that is manifesting by impaired ventilation with expiratory collapse of the tracheal wall due to softening of the supporting cartilage and hypotonia of myoelastic elements [1]. Surgery is the mainstay of treatment. We report the case of 39 -year old man with exacerbation of chronic respiratory distress. The membranous wall of the trachea and the large bronchi was stretched to...
-
Rectangular Waveguide Filters Based on Deformed Dual-Mode Cavity Resonators
PublicationIn this paper, a novel design for rectangular waveguide filters with deformed dual-mode (DM) cavity resonators is demonstrated. The new resonant cavity shape is a result of applying shape deformation to the basic rectangular cavity to enable its dual-mode operation. Internal coupling between the two orthogonal cavity modes is realized by geometry deformation, eliminating the need for additional coupling elements. The designs are...
-
Methodology of Constructing and Analyzing the Hierarchical Contextually-Oriented Corpora
PublicationMethodology of Constructing and Analyzing the Hierarchical structure of the Contextually-Oriented Corpora was developed. The methodology contains the following steps: Contextual Component of the Corpora’s Structure Building; Text Analysis of the Contextually-Oriented Hierarchical Corpus. Main contribution of this study is the following: hierarchical structure of the Corpus provides advanced possibilities for identification of the...
-
Calix[4]arenes appended with thioamide moieties as powerful tool for heavy metals recognition
PublicationSelectivity of new thioamide derivatives was assessed using those ligands as sensor materials in ion-selective membrane electrodes and tested towards Pb2+ - selectivity. The influence of the nature of the thioamide function (linear, branched or cyclic substituents) on their ionophoric properties was investigated. Electrodes based on cyclic thioamide moieties are promising analytical tools for monitoring Pb2+ concentration in natural...
-
The Influence of Microstructure on the Passive Layer Chemistry and Corrosion Resistance for Some Titanium-Based Alloys
PublicationThe effect of microstructure and chemistry on the kinetics of passive layer growth and passivity breakdown of some Ti-based alloys, namely Ti-6Al-4V, Ti-6Al-7Nb and TC21 alloys, was studied. The rate of pitting corrosion was evaluated using cyclic polarization measurements. Chronoamperometry was applied to assess the passive layer growth kinetics and breakdown. Microstructure influence on the uniform corrosion rate of these alloys...
-
Microscopic examination of the texture of paper products
Open Research DataAtomic force microscopy (AFM) can be used to study the state of the paper fibers with the aim of providing qualitative and semi-quantitative information on degradation and aging. The work [1] reports the results of tests of various paper products subjected to deliberate aging processes under the influence of various factors. Chemical and biological...
-
Development and validation of an eco-compatible UV–Vis spectrophotometric method for the determination of Cu2+ in aqueous matrices
PublicationCu 2+ are ubiquitous ions in the ecosystem and are responsible of serious environmental pollution. Indeed, the development of sensitive methods for Cu 2+ detection is an urgent demand. In this work, we proposed a new spectrophotometric method for Cu 2+ determination in different water matrices (distilled water, drinking water, wastewater, and river water). The method employs a bio-based organic ligand namely tetrasodium iminodisuccinate...
-
Cure kinetics of epoxy/MWCNTs nanocomposites: Nonisothermal calorimetric and rheokinetic techniques
PublicationNonisothermal calorimetric and isothermal rheokinetic analyses were used to study cure kinetics of epoxy/anhydride systems containing very low concentration of pristine and amine-functionalized multiwalled carbon nanotubes (MWCNTs). Isoconversional methods were applied in calorimetric modeling of cure kinetics. Eα vs. α dependency and autocatalytic nature of curing were identified for both types of nanocomposites by isoconversional...
-
Wpływ struktur wsparcia na efektywność nauczania języka pisanego w środowisku e-learningowym
PublicationThe process of knowledge and language skills development during an online course can be very effective if student engagement in learning is achieved. This can be attained by introducing general and specific support mechanisms prior to the commencement of the course and during it. The former relates to the technological aspect, that is to familiarizing students with the functionalities of the virtual learning environment they will...
-
MSRL 2.0. as a new method for research education on urban issues
PublicationThe MSRL 2.0. research is focused on the Baltic Sea Region (BSR) as a multidimensional urban phenomenon with Gdansk acting as a hub for the research teams. The idea of the MSRL 2.0. is to promote the collaboration of professionals and graduate and PhD students by bringing together the mentor(s) with a local research team sharing experiences and proposing strategic recommendations to strengthen sustainable urban development initiatives...
-
Planetary roller extruders in the sustainable development of polymer blends and composites – Past, present and future
PublicationScrew extruders as continuous flow reactors allow the synthesis of new polymers, preparation of polymer blends and composites, and modification or functionalization of commercially available polymers. Literature data shows that the twin screw extrusion is the most popular solution used for this purpose. In contrast, the number of scientific papers on alternative methods, such as multi-screw extruders, is somewhat limited. This...
-
Arabinoxylans: A review on protocols for their recovery, functionalities and roles in food formulations
PublicationArabinoxylans (AXs) are compounds with high nutritional value and applicability, including prebiotics or supplementary ingredients, in food manufacturing industries. Unfortunately, the recovery of AXs may require advanced separation and integrated strategies. Here, an analysis of the emerging techniques to extract AXs from cereals and their by-products is discussed. This review covers distinct methods implemented over the last...
-
EMG and gaze based interaction with graphic interface of smart glasses application
PublicationIn this paper we investigate the effectiveness of the interaction using eye tracking and electromyography. Smart glasses requires reliable interfaces for controlling the graphic content displayed directly in front of the user's eye. Presented research is related with the eGlasses project, which is focused on the development of an open platform in the form of multisensory electronic glasses and related interaction methods. One of...
-
Number of tax returns filed by taxpayers who obtain income taxed with a lump sum on income recorded according to sources of income (2011-2015)
Open Research DataTaxpayers engaged in non-agricultural business activities benefiting from taxation in the form of a lump sum on recorded income, are required to have and store proofs of purchase of goods, keep a list of fixed assets and intangible assets, records of equipment and, separately for each tax year, a record of revenues. The obligation to keep records of...
-
[Soft Skills] Writing grant application
e-Learning CoursesWriting grant application, 5 h., Teacher: Renata Downar-Zapolska, GUT Schedule: 20 & 21 April 2022, time: 15:45-18:00
-
Anthropopressure’s intensification with reference to Arctic ecosystems
PublicationThis paper concerns issue of long range atmospheric transport of pollutants to polar areas and intensification of their toxic effect on biota in the face of climate change. Arctic which was for years seen as a pristine and not affected by antropopressure region became a sink of xenobiotics. Atmospheric circulation facilitates transport of chemicals from Eurasia to Arctic. Influence of climate change on crucial balance of polar...
-
Parallel computations in the volunteer based Comcute system
PublicationThe paper presents Comcute which is a novel multi-level implemen- tation of the volunteer based computing paradigm. Comcute was designed to let users donate the computing power of their PCs in a simplified manner, requiring only pointing their web browser at a specific web address and clicking a mouse. The server side appoints several servers to be in charge of execution of particular tasks. Thanks to that the system can survive...
-
MEMS Gyro in the Context of Inertial Positionning
PublicationThe article undertake some vital aspect in geodesy, namely an inertial positioning problem using MEMS. Although MEMS inertial sensors offer affordable, appropriately scaled units, and though their inherent measurement noise can be relatively easily mitigated, there are still parameters due to they are not currently capable of meeting all requirements for the accurate and precise inertial positioning. The article presents crucial...
-
Mid-infrared spectroscopy for characterization of Baltic amber (succinite)
PublicationNatural Baltic amber (succinite) is the most appreciated fossil resin of the rich cultural traditions dating back to prehistoric times. Its unequivocal identification is extremely important in many branches of science and trades including archeology, paleontology, chemistry and finally mineralogical and gemological societies. Current methods of modification of natural succinite are more and more sophisticated making the identification...
-
The effect of an active force while slide diamond burnishing of wooden shafts upon process quality
PublicationThe quality of the surface of wooden elements that have been turned and burnished has got a crucial meaning in the whole production process flow, since the obtained effects affect the quality of the wooden surface after finishing (coating, painting). In the paper, selected results of the investigation of the effect of the burnishing process on the surface quality of the elements after turning are presented. Research experiments...
-
The principles of arturbain.fr for teaching sustainable urban design
PublicationThe article is an attempt to show how important it is in the contemporary education of architecture students to use an ordered repertoire of principles and concepts of a universal nature, at the same time, pointing to the new directions of solutions and answers to the problems of the 21st century. This task is implemented by the French Association L'Arturbain dans les Territoires. It is accompanied by an idea consisting in observing...
-
Stan przedawaryjny wykopu głębokiego w obudowie z pali CFA
PublicationW artykule przedstawiono stan przedawaryjny wykopu głębokiego w obudowie z pali CFA. Omówiono warunki geotechniczne podłoża oraz rozwiązania projektowe. Przeprowadzono analizę dwóch wersji projektów konstrukcyjnych oraz fazę wykonawstwa z wskazaniem na liczne błędy. Przedstawiono możliwe oraz przyjęte działania naprawcze. Omówiono problemy i błędy projektowe na etapie działań naprawczych. Wskazano przyczyny wystąpienia stanu przedawaryjnego.
-
Application of 3D- printed hydrogels in wound healing and regenerative medicine
PublicationHydrogels are three-dimensional polymer networks with hydrophilic properties. The modifiable properties of hydrogels and the structure resembling living tissue allow their versatile application. Therefore, increasing attention is focused on the use of hydrogels as bioinks for three-dimensional (3D) printing in tissue engineering. Bioprinting involves the fabrication of complex structures from several types of materials, cells,...
-
Introduction to the RSC Advances themed collection on nano and microscale modifications of biomaterials
PublicationThe dramatically increasing development of novel biomaterials, their manufacturing techniques, and surface modications, as well as their application in in vivo tests and clinical trials, is evident. It is interesting to note in what a relatively short time the well-known long-term implants have become medical standard: titanium dental implants started in 1965, and total hip arthroplasty (not very successful) was rst attempted...
-
Poloxamer: A versatile tri-block copolymer for biomedical applications
PublicationPoloxamers, also called Pluronic, belong to a unique class of synthetic tri-block copolymers containing central hydrophobic chains of poly(propylene oxide) sandwiched between two hydrophilic chains of poly(ethylene oxide). Some chemical characteristics of poloxamers such as temperature-dependent self-assembly and thermo-reversible behavior along with biocompatibility and physiochemical properties make poloxamer-based biomaterials...
-
Corrosion resistance examinations of Ti6Al4V alloy with the use of potentiodynamic method in Ringer`s and artificial saliva solutions
PublicationThe research results of corrosion resistance of the Ti6Al4V alloy in the simulated body fluids (SBF) are presented. The polished specimens have shown better corrosion resistance than grinded surfaces in both liquids. The artificial saliva has revealed more aggressive test solution than Ringer`s solution. The pitting tendency has been observed in Ringer`s solution for grinded specimens.
-
Science of Scientific Writing - 2022
e-Learning Courses -
Topological, nonreciprocal, and multiresonant slow light beyond the time-bandwidth limit
PublicationTopologically protected transport has recently emerged as an effective means to address a recurring problem hampering the field of slow light for the past two decades: its keen sensitivity to disorders and structural imperfections. With it, there has been renewed interest in efforts to overcome the delay-time-bandwidth limitation usually characterizing slow-light devices, on occasion thought to be a fundamental limit. What exactly...
-
Data on LEGO sets release dates and worldwide retail prices combined with aftermarket transaction prices in Poland between June 2018 and June 2023
PublicationThe dataset contains LEGO bricks sets item count and pricing history for AI-based set pricing prediction. The data spans the timeframe from June 2018 to June 2023. The data was obtained from three sources: Brickset.com (LEGO sets retail prices, release dates, and IDs), Lego.com official web page (ID number of each set that was released by Lego, its retail prices, the current status of the set) and promoklocki.pl web page (the retail...
-
Enhancement of the Magnetic Coupling in Exfoliated CrCl 3 Crystals Observed by Low‐Temperature Magnetic Force Microscopy and X‐ray Magnetic Circular Dichroism
PublicationMagnetic crystals formed by 2D layers interacting by weak van der Waals forces are currently a hot research topic. When these crystals are thinned to nanometric size, they can manifest strikingly different magnetic behavior compared to the bulk form. This can be the result of, for example, quantum electronic confinement effects, the presence of defects, or pinning of the crystallographic structure in metastable phases induced by...
-
Właściwości smarne cieczy roboczych układów hydraulicznych. Olej Total Azolla 46, emulsja HFA-E oraz woda.
PublicationPrzedstawiono wyniki badań własności smarnych wody destylowanej, jednoprocentowej emulsji oleju w wodzie typu HFA-E (sporządzonej na bazie koncentratu Isosynth VX110BF), oleju Total Azolla 46 oraz, w celach porównawczych, samego koncentratu Isosynth VX110BF. Przedstawiono również wyniki badań powierzchniowego zużycia zmęczeniowego (pitting), dla wyżej wymienionych czynników smarnych.
-
Influence of Flat Lapping Kinematics on Machinability of Ceramics
PublicationNew tools for flat grinding of ceramics are presented in the paper. Electroplated CBN tools (B64 and B107) were used in a modified single-disc lapping machine configuration. The results from experiments, such as the material removal rate and surface roughness parameters are presented and analyzed. Numerical simulations, based on the model for the shape error and tool wear estimation in machining with flat lapping kinematics, are...
-
The role of heterotrophic plate count bacteria in bottled water quality assessment
PublicationThe ever-growing popularity of bottled water is the result of many factors. One of the most relevant is the widespread belief that bottled water is safer for drinking than tap water. In fact many literature sources describe the rapid growth of the amounts of microorganisms in bottled water samples following the bottling process. The main purpose of this article is to collect the information on the factors which may affect this...
-
Hanna Gaweł
PeopleHanna is a PhD student at the Doctoral School in Social Sciences in the discipline of Social Communication and Media Sciences at the Jagiellonian University and is employed as an Assistant at the Institute of Information Studies of the said university. She received her Master's degree from Jagiellonian University, where she studied Information Management at the Faculty of Management and Social Sciences. Her Bachelor's degree was...
-
Low temperature processed MnCo2O4 and MnCo1.8Fe0.2O4 as effective protective coatings for solid oxide fuel cell interconnects at 750 °C
PublicationIn this study two materials, MnCo2O4 and MnCo1.8Fe0.2O4 are studied as potential protective coatings for Solid Oxide Fuel Cell interconnects working at 750 °C. First powder fabrication by a modified Pechini method is described followed by a description of the coating procedure. The protective action of the coating applied on Crofer 22 APU is evaluated by following the area specific resistance (ASR) of the scale/coating for 5500...
-
Reducing nighttime light exposure in the urban environment to benefit human health and society
PublicationNocturnal light pollution can have profound effects on humans and other organisms. Recent research indicates that nighttime outdoor lighting is increasing rapidly. Evidence from controlled laboratory studies demonstrates that nocturnal light exposure can strain the visual system, disrupt circadian physiology, suppress melatonin secretion, and impair sleep. There is a growing body of work pointing to adverse effects of outdoor lighting...
-
Linear and branched polyester resins based on dimethyl-2,5-furandicarboxylate for coating applications
PublicationIn this study, novel bio-based hydroxyl-functional (co)polyesters from dimethyl-2, 5-furandicarboxylate (DMF), 2,3-butanediol, and a variety of comonomers viz. glycerol, pentaerythritol or trimethylolpropane are prepared using a solvent-free, bulk polycondensation technique. Extensive molecular and thermal characterization was performed to elucidate the properties of these materials. The materials showed suitable properties for solvent-borne...
-
Surface texture of pine wood beams after planing in industrial conditions
PublicationMeasuring the surface features of wooden components after planing is connected with the rising demands regarding to the quality of the painted window frames. In the paper the complex surface texture analysis especially identifying of surface damages using non-contact 3D measurement techniques for precise area measurement were presented.This enabled the study of irregular surface features with sufficient fidelity and resolution....
-
Rewitalizacja przestrzeni w kontekście zrównoważonego rozwoju - potencjał zielonych dachów
PublicationThe revitalization of space in the context of sustainable development – potential of green roof. The article shows the need to take into account the principles of sustainable development in the field of the revitalization of space, and point out green roofs as a tool in this process. It is presented in the light of the green city concept, and the criteria of the European Green City Index. The article shows the ecological, social...
-
Wireless Local Area Network Technologies as Communication Solutions for Unmanned Surface Vehicles
PublicationAs the number of research activities and practical deployments of unmanned vehicles has shown a rapid growth, topics related to their communication with operator and external infrastructure became of high importance. As a result a trend of employing IP communication for this purpose is emerging and can be expected to bring significant advantages. However, its employment can be expected to be most effective using broadband communication...
-
Project application workshops_Inter PhD_electronics, telecommunications and informatics
e-Learning Coursesdisciplinary field: ETI / The aim of the course is to provide the necessary information related to the search for sources of funding for scientific research and development work, with particular emphasis on competitions addressed to young researchers. Procedures for writing grant applications will be presented.
-
Project application workshops_InterPhDII_civil and environmental engineering
e-Learning Coursesdisciplinary field: WILiŚ / The aim of the course is to provide the necessary information related to the search for sources of funding for scientific research and development work, with particular emphasis on competitions addressed to young researchers. Procedures for writing grant applications will be presented.
-
Project application workshops_Inter PhDII_chemistry
e-Learning Coursesdisciplinary field: chemistry / The aim of the course is to provide the necessary information related to the search for sources of funding for scientific research and development work, with particular emphasis on competitions addressed to young researchers. Procedures for writing grant applications will be presented.