Filters
total: 2986
filtered: 1790
displaying 1000 best results Help
Search results for: complex root tracing
-
Spectral Finite Element Method in Condition Monitoring and Damage Detection
PublicationIt is well known that the dynamic behaviour of engineering structures may carry very important and crucial information that can be further used for the assessment of their condition as well as detection of any damage induced. The current interest in monitoring techniques based on the propagation of guided elastic waves requires that numerical techniques used for modelling the phenomena associated must shift into the realm of high...
-
Numerical model for thin liquid film with evaporation and condensation on solid surfaces in systems with conjugated heat transfer
PublicationCondensation and evaporation processes from wetted surfaces are of utmost importance in many technological or industrial applications. In many devices such as home-appliances and air conditioning systems just to name a few, condensation and evaporation processes greatly impact their performance and energy efficiency; The physics of these processes is quite complex, involving conjugate heat transfer among solid–liquid film-gaseous...
-
DL_MG: A Parallel Multigrid Poisson and Poisson–Boltzmann Solver for Electronic Structure Calculations in Vacuum and Solution
PublicationThe solution of the Poisson equation is a crucial step in electronic structure calculations, yielding the electrostatic potential -- a key component of the quantum mechanical Hamiltonian. In recent decades, theoretical advances and increases in computer performance have made it possible to simulate the electronic structure of extended systems in complex environments. This requires the solution of more complicated variants of the...
-
Engineering boron and nitrogen codoped carbon nanoarchitectures to tailor molecularly imprinted polymers for PFOS determination
PublicationPer- and polyfluoroalkyl substances (PFAS) have gained significant attention as emerging contaminants due to their persistence, abundance, and adverse health effects. Consequently, the urgent need for ubiquitous and effective sensors capable of detecting and quantifying PFAS in complex environmental samples has become a priority. In this study, we present the development of an ultrasensitive molecularly imprinted polymer (MIP)...
-
Impact of abiotic stressors on nutrient removal and rhizomicrobiome composition in floating treatment wetland with Equisetum hyemale
PublicationFloating treatment wetlands (FTW) are receiving growing interest as a phyto-technology. However, there are significant research gaps regarding the actual role of plant species and plant-microbiome interactions. In this study, the nutrient uptake of Equisetum hyemale was examined in FTW microcosms under the influence of abiotic stressors: As (3 mg/L) and Pb (3 mg/L) as well as Cl− (300 and 800 mg/L) in reference to a control during...
-
Estymacja parametrów kanału NB-IoT w łączu w dół.
PublicationArtykuł dotyczy doboru metody estymacji parametrów kanału, odpowiedniej do zastosowania w terminalu wąskopasmowego Internetu Rzeczy. Przedstawiono strukturę sygnału pilotowego NRS, używanego do wyznaczenia współczynników kanału w LTE-NB. Zaproponowano cztery warianty metody wyznaczenia współczynników kanału dla całej ramki transmisyjnej. Dokonano oceny tych wariantów w oparciu o dwa wskaźniki jakościowe skojarzone z błędem odtworzonych...
-
New Algorithms for Adaptive Notch Smoothing
PublicationThe problem of extraction/elimination of a nonstationary complex sinusoidal signal buried in noise is considered. This problem is usually solved using adaptive notch filtering (ANF)algorithms. It is shown that accuracy of signal estimation can be increased if the results obtained from ANF are further processed using a cascade of appropriately designed filters. The resulting adaptive notch smoothing (ANS) algorithms can be employed...
-
Fracture simulations in concrete beam under bending using a mesoscopic model with cohesive elements
PublicationThe main aim of this paper was to investigate a complex fracture process in a concrete beam subjected to 3-point bending test by means of the 2D meso-scale FEM with 4-node cohesive elements embedded in the initial mesh of 3-node solid elements. The material heterogeneity was taken into account by considering 3 different phases (aggregate, cement matrix, ITZs) on the basis of randomly generated internal structure of concrete and...
-
Definition of urban regeneration projects in Russian cities
PublicationUrban regeneration is extremely important process for Russian cities, which faced to the challenges of post-industrial economy. In an attempt, to explain needs of urban regeneration in Russian megacities author analyzed the social and economic trends and some historic features of Russian cities development. The article identified the key areas for regeneration such as the regeneration of historic core, the regeneration of the urban...
-
Anion binding by p-aminoazobenzene-derived aromatic amides: spectroscopic and electrochemical studies
PublicationThe synthesis and complexing properties of p-aminoazobenzene-derived mono-, bis-, and trisamides were described. Ligands 3 and 4 bind anions, including fluorides, chlorides, bromides, acetates, benzoates, dihydrogen phosphates, hydrogen sulfates, and p-toluenesulfonates, in chloroform forming 1 : 1 complexes. The highest value of stability constant was evaluated for the 4-F− complex (log K = 5.63 ± 0.21). On the basis of 1H NMR,...
-
Synthesis and Spectroscopic Properties of New Bis-tetrazoles
PublicationSyntheses of N,N'-phenyltetrazole podands link with aliphatic chains containing oxygen, nitrogen and sulphur atoms, are described. The complexing properties of these compounds towards metal cations (Fe2+, Cu2+, Zn2+, Co2+, Ni2+) were investigated by absorption and infrared spectroscopy. The UV-Vis titrations were performed to estimate the stability constant values of the respective complexes with Cu2+ ion. Changes in UV-Vis absorption...
-
Evolution of Animats Following a Moving Target in an Artificial Ecosystem
PublicationMany biological animals, even microscopically small, are able to track moving sources of food. In this paper, we investigate the emergence of such behavior in artificial animals (animats) in a 2-dimensional simulated liquid environment. These "predators" are controlled by evolving artificial gene regulatory networks encoded in linear genomes. The fate of the predators is determined only by their ability to gather food and reproduce—no...
-
A Novel Multicast Architecture of Programmable Networks
PublicationIn the paper a multicast architecture for programmable networks based on separation of group management and network control tasks is proposed. Thanks to this separation, services which want to make use of multicast communications no longer have to implement low-level network functionalities and their operation is greatly simplified. Abstracting service’s view of the network into a fully connected cloud enables us to transparently...
-
A theoretical framework for understanding trust and distrust in internet voting
PublicationEach and every case of success and failure in the implementation of internet voting is permeated by a common element: the concept of trust. Several researchers highlighted the relevance of creating trust for the successful implementation of technology [15] and, in particular, of internet voting [13]. But the concept itself is complex and challenging to define, for one fundamental reason: it is a concept of everyday social use...
-
Reactions of Lithiated Diphosphanes R2P-P(SiMe3)Li (R = tBu, iPr, iPr2N, Et2N) with [Cp2WCl2]. Syntheses and Structures of the First Terminal Phosphanylphosphido Complexes of Tungsten(IV)
PublicationReactions of R2P−P(SiMe3)Li (R = tBu, iPr, iPr2N, Et2N) with [Cp2WCl2] yield terminal phosphanylphosphido complexes [Cp(C5H4P-PR2)WH] or [Cp{C5H4P-PR2}-W(SiMe3)] by way of a hydrogen or SiMe3 migration to tungsten. The solid-state structures of [Cp(C5H4P−PtBu2)-WH] and [Cp(C5H4P-PNEt2)WH] were established by singlecrystalX-ray diffraction. Two stereoisomers of [Cp(C5H4P−PtBu2)WH] were identified by solution NMR spectroscopy. Reaction...
-
Human Centric Lighting. The New X Factor?
PublicationWe live in challenging times, and one could even claim we’re experiencing a revolution in lighting with LED technology taking over the world. Part of this rapid change involves a concept called Human Centric Lighting (HCL). In Frankfurt this year, during Light+Building, it was the buzzword, with nearly every second manufacturer’s stand claiming they had figured out the special formula necessary to create perfect HCL illumination....
-
A Concept of Modeling and Optimization of Applications in Large Scale Systems
PublicationThe chapter presents the idea that includes modeling and subsequent optimization of application execution on large scale parallel and distributed systems. The model considers performance, reliability and power consumption. It should allow easy modeling of various classes of applications while reflecting key parameters of both the applications and two classes of target systems: clusters and volunteer based systems. The chapter presents...
-
The consequences of applying a new Polish Water Law Act for protection against urban flooding
PublicationPrevious legal regulations did not create conditions for a comprehensive solution to the problems of the urban melioration complex. For over 20 years, urban flooding caused by atmospheric precipitation has been systematically recurring in Poland. The article was elaborated on the experience resulting from the 2001 and 2016 floods in Gdansk (Poland). The newly adopted Water Law Act creates a foundation for a systemic solution...
-
Emotion Recognition - the need for a complete analysis of the phenomenon of expression formation
PublicationThis article shows how complex emotions are. This has been proven by the analysis of the changes that occur on the face. The authors present the problem of image analysis for the purpose of identifying emotions. In addition, they point out the importance of recording the phenomenon of the development of emotions on the human face with the use of high-speed cameras, which allows the detection of micro expression. The work that was...
-
A Device for Measuring Auditory Brainstem Responses to Audio
PublicationStandard ABR devices use clicks and tone bursts to assess subjects’ hearing in an objective way. A new device was developed that extends the functionality of a standard ABR audiometer by collecting and analyzing auditory brainstem responses (ABR). The developed accessory allows for the use of complex sounds (e.g., speech or music excerpts) as stimuli. Therefore, it is possible to find out how efficiently different types of sounds...
-
Anomalous decay of quantum correlations of quantum-dot qubits
PublicationWe study the evolution of quantum correlations, quantified by the geometric discord, of two excitonic quantum-dot qubits under the influence of the phonon environment. We show that the decay of these correlations differs substantially from the decay of entanglement. Instead of displaying sudden-death-type behavior, the geometric discord shows a tendency to undergo transitions between different types of decay, is sensitive to nonlocal...
-
ECG-based prediction of ventricular fibrillation by means of the PCA
PublicationA Sudden Cardiac Death (SCD) is a death resulting from cardiac failure with no significant symptoms earlier than one hour before occurrence. It is the cause of for approximately 400000 deaths per year in United States and millions of deaths worldwide. The proposed system, including two-stage algorithm and wearable diagnostic device allows for SCD risk estimation and continuous monitoring of high risk patients. A single channel...
-
Junctions In Shell Structures: A Review
PublicationMany shell structures used in modern technology consist of regular shell parts joined together along their common boundaries. We review different theoretical, numerical, and experimental approaches to modelling, analyses and design of the compound shell structures with junctions. Several alternative forms of boundary, continuity and jump conditions at the singular midsurface curves modelling the shell junction are reviewed. We...
-
Transition-Metal-Promoted Oxidative Cyclization To Give 1,2,4-Trisubstituted Carbazole Scaffolds
PublicationHerein, we describe the synthesis of a 1,2,4-trisubstituted carbazole core from 5-(1H-indol-3-yl)-3-oxopentanoic acid esters or amides. For oxidative cyclization, we tested two different approaches. First, we used manganese triacetate as a conventional moderate oxidizer to ensure the radical course of the reaction. Second, we examined the use of a more complex oxidizing agent I2/Me(OTf)3. In both cases, formation of a fused-ring...
-
ICT and social development. Conceptual considerations.
PublicationThis chapter is intended to provide basic ideas and concepts related to technology, technological progress and society. It explains how and why technology and society are interrelated, forming a dynamic, complex and interdependent evolutionary system. It introduces the terms Digital (ICT) Revolution and information and communication technologies (ICTs), showing elementary features of new technologies. The chapter explains why ICTs...
-
Microstructure–Property Relationship of Polyurethane Foams Modified with Baltic Sea Biomass: Microcomputed Tomography vs. Scanning Electron Microscopy
PublicationIn this paper, novel rigid polyurethane foams modified with Baltic Sea biomass were compared with traditional petro-based polyurethane foam as reference sample. A special attention was focused on complex studies of microstructure, which was visualized and measured in 3D with high-resolution microcomputed tomography (microCT) and, as commonly applied for this purpose, scanning electron microscopy (SEM). The impact of pore volume,...
-
Application of Multivariate Analysis Methods in Welding Engineering
PublicationPhenomena and processes taking place during welding are usually very complex and, for this reason, should be described using multivariate methods. The article discusses the methodological basis and selected application areas as regards the solving of welding problems using statistical multivariate methods. In addition, the article presents exemplary applications of the design of experiment, multiple regression analysis, cluster...
-
Determination of p-y curves for offshore piles based on in-situ soil investigations
PublicationOffshore piles are subjected to complex loads with considerable lateral component. The pile-soil response to lateral loads can be described with the p-y method. For a given depth the load–deflection relationship is built to simulate the surrounding soil stiffness. This state-of-art paper presents a brief discussion of determination methods for the p-y curves using a standard approach based on the soil parameters derived from laboratory...
-
GIUSEPPE VOLPI. IL GRANDE MEDIATORE TRA ISTITUZIONI, POLITICA ED ECONOMIA
PublicationGiuseppe Volpi di Misurata represented a mediation point between different interests both in the economic field and in the complex national – but also regional and local – political balance that long underpinned the fascist regime. This article intends to revisit this figure between the 1920s and the Second World War. The attempt will be made to identify, through an approach that will be chronological and thematic, the passages...
-
High-accuracy computation of hard X-ray focusing and imaging for refractive optics
PublicationA mathematical apparatus for solving problems of X-ray wave propagation through complex optical systems, when the lens thickness can change with jumps, is developed and presented. The developed method is based on the use of the superposition of oriented Gaussian beams, which satisfy the Helmholtz equation with high accuracy. The wave propagation in air and through kinoform and ordinary lenses is considered. Focusing and imaging...
-
Asynchronous Method of Simultaneous Object Position and Orientation Estimation with Two Transmitters
PublicationThis paper proposes an object location method for all types of applications, including the Internet of Things. The proposed method enables estimations of the position and orientation of an object on a plane or in space, especially during motion, by means of location signals transmitted simultaneously from two transmitters placed on the object at a known distance from each other. A mathematical analysis of the proposed method and...
-
Mercury in Living Organisms: Sources and Forms of Occurrence, Bioaccumulation, and Determination Methods
PublicationMercury (Hg) is a heavy metal with well-known and broadly tested toxicity. Since Hg pollution and its impacts on human health are of global concern, it has become necessary to develop analytical methodologies that will provide tools to obtain reliable analytical information about the levels of Hg in samples, which very often have a complex matrix composition. This chapter summarizes key information on Hg and its chemical forms,...
-
The impact of footing conditions of a vertical-axis floating-roof tank on structural shell deformation
PublicationStructural shells of fuel tanks are often subjected to geometric imperfections which may lead to exceeding the ultimate and serviceability limit states. One of the means triggering shell deformation is non-uniform settlement caused by incoherent soil conditions. Analysis carried out in the work concerns of vertical-axis, floating-roof cylindrical shell which volume is 50.000 m3, founded on a complex multi-layered soil. The sensitivity...
-
Trust in Electronic Word-of-Mouth (eWOM): the concept and the most important determinants
PublicationeWOM and trust in it is now the most important factor in determining buyers' purchasing behavior. Familiarity with the determinants of trust establishes the formation of appropriate marketing activities. However, the growing number of new forms of eWOM and its increasingly complex and multidimensional nature have created a lot of confusion. The article aims to organize the concepts related to trust in eWOM, to indicate the most...
-
Electromagnetic interference frequencies prediction model of flyback converter for snubber design
PublicationSnubber design for flyback converters usually requires experimental prototype measurements or simulation based on accurate and complex models. In this study simplified circuit modelling of a flyback converter has been described to dimension snubbers in early stage of design process. Simulation based prediction of the transistor and diode ringing frequencies has been validated by measurements in a prototype setup. In that way obtained...
-
Możliwości satelitarnej oceny położenia geometrycznego tramwajowych węzłów rozjazdowych
PublicationW referacie skupiono się na kwestii oceny złożonych układów geometrycznych linii tramwajowych, w rejonach krańcówek, ze szczególnym uwzględnieniem węzłów rozjazdowych. Przedstawiono wyniki ciągłych pomiarów satelitarnych przeprowadzonych w eksploatowanym torze. Omówiono metodykę opracowywania wyników, uwzględniającą specyfikę projektowania rozjazdów tramwajowych. Stwierdzono poprawność geometrycznego ukształtowania badanych układów,...
-
Direct human contact with siloxanes (silicones): safety or risk. Part 1: characteristics of siloxanes (silicones
PublicationSiloxanes are commonly known as silicones. They belong to the organosiliconcompounds and are exclusively obtained by synthesis. Their chemical structuredetermines a range of physicochemical properties which were recognized as unique.Due to the susceptibility to chemical modifications, ability to create short, long orcomplex polymer particles, siloxanes found an application in many areas of human life.
-
Landscape protection - the challenge for sustainable planning
PublicationGrowing spatial chaos reminds us of the need for systematic, complex approaches related to environmental and landscape issues within different planning, organizational, operational, legal and political activities. It has been proved, that LVIA within EIA plays an important role in the enhancement of the spatial planning system, and that there is a need to use the potential of EIA/LVIA in spatial development and management. But...
-
Modelling of Mechatronic Systems with Distributed Parameter Components
PublicationThe paper presents an uniform, port-based approach to modelling of both lumped and distributed parameter systems. Port-based model of distributed system has been defined by application of the bond graph methodology and the distributed transfer function method (DTFM). The proposed method of modelling enables to formulate input data for computer analysis by application of the DTFM. The computational package for the analysis of complex...
-
Optimum Control of Gyroscopic Systems
PublicationThe problem of optimum control of transverse rotor vibrations with gyroscopic interactions has been described and solved in the paper. An integral performance index has been defined for such system in order to minimize vibration level of a chosen rotor point. For this reason, an efficient way of finding the weight coefficients of integral performance index for multi-degrees-of-freedom system with gyroscopic interactions has been...
-
Application of Web-GIS and Cloud Computing to Automatic Satellite Image Correction
PublicationRadiometric calibration of satellite imagery requires coupling of atmospheric and topographic parameters, which constitutes serious computational problems in particular in complex geographical terrain. Successful application of topographic normalization algorithms for calibration purposes requires integration of several types of high-resolution geographic datasets and their processing in a common context. This paper presents the...
-
How to choose drive’s rated power in electrified urban transport?
PublicationSelection of drive's rated power influences not only vehicle's dynamics, but also its energy efficiency. Mentioned above approach requires a multiphysical model, which covers both mechanical and electrical phenomena. This paper discusses how selection of traction drive's rated power influences vehicle energy consumption on example of a trolleybus. A complex mathematical model was developed in Matlab/Simulink to describe the multiphisical...
-
GPU-Accelerated 3D Mesh Deformation for Optimization Based on the Finite Element Method
PublicationThis paper discusses a strategy for speeding up the mesh deformation process in the design-byoptimization of high-frequency components involving electromagnetic field simulations using the 3D finite element method (FEM). The mesh deformation is assumed to be described by a linear elasticity model of a rigid body; therefore, each time the shape of the device is changed, an auxiliary elasticity finite-element problem must be solved....
-
Framework for RIDM within functional safety management process
PublicationThe functional safety management in life cycle is a complex process starting with identifying hazards and defining safety-related functions (SRFs) with risk assessment oriented at determining the safety integrity level. Another element of such life cycle is a verification of required SIL for designed safety-related system which implements safety function. Due to complexity of the problem, to overcome difficulties in safety-related...
-
Multi-agent systems registration and maintenance of address mapping without agent self-registation
PublicationMonitoring of dynamic multi-agent systems, here agents are allowed to appear and disappear, and can migrate between network nodes is a complex tasks. Applying the traditional monitoring methods is not effective, as little can be assumed in advance about such environments. It is necessary to track changes in addressing and availability of agents to create and maintain mapping between agents and their network addresses. The...
-
A digital implementation of the PSK transmitter and receiver as multirate algorithms of the digital signal processing
PublicationIn this paper designs of the transmitter and the receiver of PSK signals as three-rate algorithms of the digital signal processing are described. Additionally we show the examples of the transmitter and the receiver of the following signals: BPSK, QPSK. We discussed also an influence of the cascade of the shaping filter and the receiving filter on the intersymbol interference in the received complex envelope.W pracy opisano projektowanie...
-
Modelling and analysis of beam/bar structure by application of bond graphs
PublicationThe paper presents an uniform, port-based approach to modelling of beam/bar systems (trusses). Port-based model of such distributed parameter system has been defined by application of the bond graph methodology and the distributed transfer function method (DTFM). The proposed method of modelling enables to formulate input data for computer analysis by application of the DTFM. The constructed computational package enables the frequency...
-
A Comprehensive Review: Applications of the Kozeny–Carman Model in Engineering with Permeability Dynamics
PublicationIn this review article, we investigate the dynamic nature of the Kozeny–Carman Model concerning permeability and its application in engineering contexts. Providing insights into the changing dynamics of permeability within mining, petroleum, and geotechnical engineering, among other engineering applications. While some are complex and require additional modifcations to be applicable, others are simple and still function in specifc...
-
Optimizing the computation of a parallel 3D finite difference algorithm for graphics processing units
PublicationThis paper explores the possibilities of using a graphics processing unit for complex 3D finite difference computation via MUSTA‐FORCE and WENO algorithms. We propose a novel algorithm based on the new properties of CUDA surface memory optimized for 2D spatial locality and compare it with 3D stencil computations carried out via shared memory, which is currently considered to be the best approach. A case study was performed for...
-
Synthesis and characterization of mononuclear Zn(II), Co(II) and Ni(II) complexes containing a sterically demanding silanethiolate ligand derived from tris(2,6-diisopropylphenoxy)silanethiol
PublicationFour heteroleptic complexes of zinc(II), cobalt(II) and nickel(II) containing a monodentate silanethiolate ligand derived from tris(2,6-diisopropylphenoxy)silanethiol (TDST), were prepared and characterized. The geometries of ligands in the complexes are typical: distorted tetrahedral in zinc and cobalt(II) complexes and square planar in nickel(II) compound. Magnetic studies performed for Ni(II) and Co(II) compounds confirm the...