Search
Filters
total: 21983
filtered: 1258
-
Catalog
Chosen catalog filters
displaying 1000 best results Help
Search results for: ELIMINATION OF CLICKS
-
Acoustic evaluation of road surfaces using different Close Proximity testing devices
PublicationAccording to the valid standard, Close Proximity (CPX) method intends to evaluate the influence of road surfaces on traffic noise. Measurements may be carried out with the use of a self-powered vehicle or a special test trailer equipped with testing tyre towed by another vehicle. Two different testing devices took part in the research organized in Poland in order to determine the ranking of road surfaces in terms of acoustic parameters....
-
The unstable thermoelectric effect in non-stoichiometric Cu2Se during the non-equilibrium phase transition
PublicationThe superionic α ↔ β phase transition in Cu1.96Se thermoelectric material is investigated by means of thermal analysis (DSC) and measurements of Seebeck coefficient and electrical conductivity. Results of the DSC measurements with 1–10 K/min heating and cooling rates show that the material is close to the equilibrium phase composition during the transformation. However, the kinetic limitation of the process exists, which is indicated...
-
Chain Action - How Do Countries Add Value Through Digital Government?
PublicationThis study examineshow countries develop and benefit from Digital Government(DG).The literature proposes various conceptualizations of the value-adding logic of DG, but the benchmarking practice is not respondingto such proposals.For instance, the United Nations’E-Government Surveycombines the readiness and uptake indicatorsand failsto cover any impactindicators;thus,its diagnostic valueis limited. To overcome...
-
ZASPA NOVA - połączeni dziedzictwem blokowisk/ connected by the heritage of housing estates
PublicationWizje nowe Zaspy – Zaspa Nova – prezentują koncepcje architektoniczne dla wybranych, kluczowych stref osiedla. Węzeł komunikacyjny, wnętrze urbanistyczne między blokami i obszar rekreacyjny powiązany funkcjonalnie z ogródkami działkowymi zyskały w propozycjach europejskich studentów architektury nowy kształt i wyraz przestrzenny.
-
Dominant Pathways of Adenosyl Radical-Induced DNA Damage Revealed by QM/MM Metadynamics
PublicationBrominated nucleobases sensitize double stranded DNA to hydrated electrons, one of the dominant genotoxic species produced in hypoxic cancer cells during radiotherapy. Such radiosensitizers can therefore be administered locally to enhance treatment efficiency within the solid tumor while protecting the neighboring tissue. When a solvated electron attaches to 8-bromoadenosine, a potential sensitizer, the dissociation of bromide...
-
Syntheses and Structures of Transition Metal Complexes with Phosphanylphosphinidene Chalcogenide Ligands
PublicationThe reactivity of the phosphanylphosphinidene complex [(DippN)2W(Cl)(η2-P-PtBu2)]− (1) toward chalcogens (Ch = Se, S) was studied. Reactions of stoichiometric amounts of 1 with chalcogens in DME yielded monomeric tungsten complexes with phosphanylphosphinidene chalcogenide ligands of the formula tBu2P−P−Ch (Ch = Se (in 2) and S (in 5)), which can be regarded as products of the addition of a chalcogen atom to a P=W bond in starting...
-
Selected aspects of two-phase flow studies using different visualization techniques in minichannels
PublicationThe subject of the study is to present the possibility of the use of visualization techniques in the researches on two-phase flows, carried out by the authors for many years. These works included as follows: heat transfer during the flow boiling, boiling crises and condensation in flow. The issue of the heat transfer intensification during the flow boiling through the channels of small diameters was analyzed. All this work focused...
-
Development of a simulation model of the activities of a transport and forwarding enterprise in the organization of international road cargo transportation
PublicationThe object of this study is the process of planning the work of a transport and forwarding company when serving different categories of customers who need organizational support for the delivery of goods by road transport in international traffic. The solved problem is due to the need to devise recommendations for organizing the work of forwarders when interacting with customers of transport and forwarding services that export...
-
Agri-food waste biosorbents for volatile organic compounds removal from air and industrial gases – A review
PublicationApproximately 1.3 billion metric tons of agricultural and food waste is produced annually, highlighting the need for appropriate processing and management strategies. This paper provides an exhaustive overview of the utilization of agri-food waste as a biosorbents for the elimination of volatile organic compounds (VOCs) from gaseous streams. The review paper underscores the critical role of waste management in the context of a...
-
Optimized photodegradation of palm oil agroindustry waste effluent using multivalent manganese–modified black titanium dioxide
PublicationThis article presents a methodological approach to use manganese (Mn3+Mn7+)-modified black titanium dioxide (Mn/BTiO2) as a photocatalyst to optimize and improve visible-light-driven photodegradation of treated agro-industrial effluent (TPOME). A modified wet chemical process was used to prepare BTiO2. The BTiO2 was then wet impregnated with Mn and calcined at 300 °C for 1 h to produce Mn/BTiO2. The activity of Mn/BTiO2 was investigated...
-
Two-spinors, oscillator algebras, and qubits: aspects of manifestly covariant approach to relativistic quantum information
PublicationThe first part of the paper reviews applications of 2-spinor methods to relativistic qubits (analogies between tetrads in Minkowski space and 2-qubit states, qubits defined by means of null directions and their role for elimination of the Peres-Scudo-Terno phenomenon, advantages and disadvantages of relativistic polarization operators defined by the Pauli-Lubanski vector, manifestly covariant approach to unitary representations...
-
Green chromatography
PublicationAnalysis of organic compounds in samples characterized by different composition of the matrix is very important in many areas. A vast majority of organic compound determinations are performed using gas or liquid chromatographic methods. It is thus very important that these methods have negligible environmental impact. Chromatographic techniques have the potential to be greener at all steps of the analysis, from sample collection...
-
New nanoadsorbent based on magnetic iron oxide containing 1,4,7,10-tetraazacyclododecane in outer chain (Fe3O4@SiO2-cyclen) for adsorption and removal of selected heavy metal ions Cd2+, Pb2+, Cu2+
PublicationMagnetic Fe3O4@SiO2-cyclen nanoparticles were prepared and used as adsorbent for Cd2+, Pb2+ and Cu2+ from aqueous solution removal process controlled with differential pulse anodic stripping voltammetry (DPASV) and hanging mercury drop electrode (HDME). Nanomaterial was synthesised in three-step process co-precipitation of Fe3O4 core, coating with silane and N-(3-(triethoxysilyl)propyl)-1,4,7,10-tetraazacyclododecane-1-carboxamide...
-
Audio Feature Analysis for Precise Vocalic Segments Classification in English
PublicationAn approach to identifying the most meaningful Mel-Frequency Cepstral Coefficients representing selected allophones and vocalic segments for their classification is presented in the paper. For this purpose, experiments were carried out using algorithms such as Principal Component Analysis, Feature Importance, and Recursive Parameter Elimination. The data used were recordings made within the ALOFON corpus containing audio signal...
-
Challenges and recent advances in bio-based isocyanate production.
PublicationPolyurethanes (PUs) are key players in the plastics industry. According to the Global Polyurethane Market (2019–2023), their value in the global market reached $95.13 billion in 2019 and is expected to grow at a compound annual growth rate of 12%. This is in line with the increase in the number of research papers and patents on the synthesis and application of petroleum-based PUs (P-PUs) and biomass or green PUs (G-PUs) (from 67 657...
-
Synthesis, structure and properties of poly(ether-urethane)s synthesized using a tri-functional oxypropylated glycerol as a polyol
PublicationThe main aim of this work was to obtain poly(ether-urethane)s using tri-functional polyoxyalkylene polyol (Rokopol G1000), which introducing the chemical cross-links into the structure of polyurethanes. Poly(ether-urethane)s were prepared using two-step method, called prepolymer method, which involves in the first step the reaction of 4,4'-diphenylmethane diisocyanate (MDI) and tri-functional polypropylene glycol glycerol triether...
-
How can HSR promote inter-city collaborative innovation across regional borders?
PublicationMany studies have shown that high-speed rail (HSR) can reshape the spatial pattern of economic geography. However, there needs to be more logical argumentation and rigorous empirical design on the paths and mechanisms involved. This paper considers the impact of the border effect on HSR links and innovation clusters from the perspective of inter-regional collaborative innovation. It provides a logical and compact theoretical...
-
Current Trends in Wick Structure Construction in Loop Heat Pipes Applications: A Review
PublicationThermal control systems have been introduced as an important part of electronic devices, enabling thermal management of their electronic components. Loop heat pipe (LHP) is a passive two-phase heat transfer device with significant potential for numerous applications, such as aerospace applications, high-power LEDs, and solar central receivers. Its advantages are high heat transfer capability, low thermal resistance, long-distance...
-
Position and velocity measurement using incremental encoder and microcontroller.
PublicationThere is presented measurement of position and velocity using Atmel's microcontroller ATTiny2313 with 20 MHz clock and encoder with 1024 pulses per revolution. This configuration allows measuring maximum speed 48800 rpm with 1x accuracy, 20200 rpm with 2x accuracy and 9400 rpm with 4x accuracy (quadrature). Position is measured with resolution of 0.352', 0.176' and 0.088' for 1x, 2x, 4x accuracy respectively. Algorithms of position...
-
Bezzałogowe środki latające (BSL) w układzie czterowirnikowego helikoptera
PublicationRozwój układów sterowania, kamer pracujących w świetle widzialnym oraz w podczerwieni doprowadził do wzrostu znaczenia bezpilotowych środków latających. Bezpilotowe środki latające wykorzystywane są do realizacji celów zarówno wojskowych, jak i cywilnych. Podstawowymi zaletami bezpilotowych środków latających są: małe wymiary, duża mobilność, niskie koszty wytworzenia i eksploatacji. Użytkowanie bezpilotowych środków latających...
-
Eksperymentalna weryfikacja procedury szacowania wytrzymałości młodego betonu wg normy ASTM C1074
PublicationW referacie przedstawiono metodę służącą oszacowaniu wytrzymałości betonu w trakcie procesu dojrzewania (ang. Maturity Method) bazującą na procedurze określonej zgodnie z amerykańską normą, która uwzględnia wpływ połączonych efektów temperatury i czasu na rozwój wytrzymałości betonu. Standardy ASTM C1074 zostały opracowane przez NBS (ang. National Bureau of Standards) z uwagi na powtarzające się wypadki na palcu budowy wynikające...
-
Ochrona odbiorników GNSS przed zakłóceniami celowymi
PublicationArtykuł dotyczy zastosowania algorytmów przestrzennego cyfrowego przetwarzania sygnałów dla potrzeb selektywnej eliminacji sygnałów zakłócających pracę odbiorników nawigacji satelitarnej GNSS. Omówiono podatność tych odbiorników na ataki elektroniczne typu zagłuszanie oraz spoofing. Polegają one na celowej emisji sygnałów niepożądanych w paśmie pracy systemu. Następnie przedstawiono koncepcję przeciwdziałania tego rodzaju zakłóceniom...
-
Przyczółki mostowe z konstrukcją odciążającą z gruntu zbrojonego geosyntetykami
PublicationPrzegląd najważniejszych cech geotekstyliów i wyrobów pokrewnych, zastosowanych do budowy bloków odciążających ze szczególnym uwzględnieniem ich wytrzymałości długo i krótkookresowej oraz reologii. Określenie obciążeń działających na konstrukcję gruntową współpracującą z przyczółkiem; obciążenia normowe i rzeczywiste. Obliczenia konstrukcji z gruntu zbrojonego współpracującej z przyczółkiem
-
Nowe zakresy kreowania wizerunku fasad przy zastosowaniu technologii filtrów optycznych.
PublicationModern facades, whether made of glass or including transparent, translucent or reflective elements, let through a particular light spectrum or change its intensity in many different ways. “Filtering facades” may change the image seen through them or change the colour of passing light according to specific circumstances: the angle of observation or temperature. These indicated properties of facades acting as “filters” were made...
-
Inspection of Gas Pipelines Using Magnetic Flux Leakage Technology
PublicationMagnetic non-destructive testing methods can be classified into the earliest methods developed for assessment of steel constructions. One of them is the magnetic flux leakage technology. A measurement of the magnetic flux leakage is quite commonly used for examination of large objects such as tanks and pipelines. Construction of a magnetic flux leakage tool is relatively simple, but a quantitative analysis of recorded data is a...
-
Acoustic imaging of selected areas of Gdansk Bay with the aid of parametric echosounder and side-scan sonar
PublicationThe article presents and analyses the data recorded during sounding of the Gdansk Bay seabed with the aid of a parametric echosounder and a side-scan sonar. The accuracy of seabed structure examination, as a condition for obtaining valuable results, requires correct configuration of echolocation devices and proper calibration of peripheral devices, such as the survey unit geographical position sensor – GPS, the navigation unit,...
-
Multibody models for gait analysis
PublicationThe aim of this study was to create multibody biomechanical models to analyze a normal gait of the human. Proposed models can be used to identify joint moments of the lower limbs during normal gait in the single and double support phases. Applying Newton-Euler formulation, following planar models were developed: 1) a mathematical 6DOF model describing a gait in the sagittal plane of the body for single support phase and double...
-
Monitoring and analytics of semivolatile organic compounds (SVOCs) in indoor air
PublicationThis paper reviews literature information on the behaviour of semivolatile organic compounds (SVOCs) in the indoor environment, as well as the most likely emission sources. The consecutive stages of analytical procedures used for monitoring SVOCs in indoor environments are described. The most common approaches used for collecting samples from the gas and particulate phases are mentioned. The paper discusses and compares various...
-
Real-Time Gastrointestinal Tract Video Analysis on a Cluster Supercomputer
PublicationThe article presents a novel approach to medical video data analysis and recognition. Emphasis has been put on adapting existing algorithms detecting le- sions and bleedings for real time usage in a medical doctor's office during an en- doscopic examination. A system for diagnosis recommendation and disease detec- tion has been designed taking into account the limited mobility of the endoscope and the doctor's requirements. The...
-
Modified nanodiamond particle size studies by means of dynamic light scattering technique
PublicationThe Methods Utilizing the Phenomena of Light Scattering to Measure Particle Size distribution in different solvent, such as deionise water and alcohol and also to study the various structural formation when nanodiamond solution is placed on silicon surface. The purpose of this research project is divided into two parts to configure the measurement units for examining modified nanodiamond particles, examination...
-
Modified nanodiamond particle size studies by means of dynamic light scattering technique
PublicationThe Methods Utilizing the Phenomena of Light Scattering to Measure Particle Size distribution in different solvent, such as deionise water and alcohol and also to study the various structural formation when nanodiamond solution is placed on silicon surface. The purpose of this research project is divided into two parts to configure the measurement units for examining modified nanodiamond particles, examination...
-
Evolutionary Planning of Safe Ship Tracks in Restricted Visibility
PublicationThe paper presents the continuation of the author's research on ship track planning by means of Evolutionary Algorithms (EA). The presented method uses EA to search for an optimal set of safe tracks for all ships involved in an encounter. Until now the method assumed good visibility – compliance with standard rules of the Convention on the International Regulations for Preventing Collisions at Sea (COLREGS, 1972). However, in restricted...
-
Real-Time Bleeding Detection in Gastrointestinal Tract Endoscopic Examinations Video
PublicationThe article presents a novel approach to medical video data analysis and recognition of bleedings. Emphasis has been put on adapting pre-existing algorithms dedicated to the detection of bleedings for real-time usage in a medical doctor’s office during an endoscopic examination. A real-time system for analyzing endoscopic videos has been designed according to the most significant requirements of medical doctors. The main goal of...
-
High-Speed Binary-to-Residue Converter Design Using 2-Bit Segmentation of the Input Word
PublicationIn this paper a new approach to the design of the high-speed binary-to-residue converter is proposed that allows the attaining of high pipelining rates by eliminating memories used in modulo m generators. The converter algorithm uses segmentation of the input binary word into 2-bit segments. The use and effects of the input word segmentation for the synthesis of converters for five-bit moduli are presented. For the number represented...
-
Evaluation of the Cathodic Electrodeposition Effectiveness of the Hydroxyapatite Layer Used in Surface Modification of Ti6Al4V-Based Biomaterials
PublicationThe important issue associated with the design and the fabrication of the titanium and titanium alloy implants is the increase of their biointegration with bone tissue. In the presented paper, the research results concerning the conditions used in the cathodic deposition of hydroxyapatite on the surface Ti6Al4V substrates primarily modified by the production of TiO2 nanoporous coatings, TiO2 nanofibers, and titanate coatings, are...
-
Morphology and mechanical properties of polyamide/clay nanocomposites toughened with NBR/NBR-g-GMA: A comparative study
PublicationThis work highlights the importance of nanoclay dispersion state in the nanocomposites containing polyamide 6 (PA6), nanoclay and elastomers as well as clay localization at the interface of thermoplastic/elastomer. Morphology and mechanical properties of a series of nanocomposites containing acrylonitrile butadiene rubber (NBR), glycidyl methacrylate-grafted NBR (NBR-g-GMA), and combined NBR/NBR-g-GMA were compared and discussed...
-
Laser Dissimilar Welding of AISI 430F and AISI 304 Stainless Steels
PublicationA dissimilar autogenous laser welded joint of AISI 430F (X12CrMoS17) martensitic stainless steel and AISI 304 (X5CrNi18-10) austenitic stainless steel was manufactured. The welded joint was examined by non-destructive visual testing and destructive testing by macro- and microscopic examination and hardness measurements. With reference to the ISO 13919-1 standard the welded joint was characterized by C level, due to the gas pores...
-
Distributed wireless sensor for measuring humidity and temperature
PublicationHumidity and temperature monitoring is often required in industrial halls and laboratories and can be crucial, because many properties of electrical devices deteriorates under influence of these parameters. There are several useful commercial methods for measuring humidity and temperature, such as commercial hygrometers and humidity recorders. However, they do not allow data acquisition simultaneously from multiple sensors. This...
-
Analysis of the dynamic influences on the Lowland Gate in Gdańsk
PublicationThe Lowland Gate has been built in 1626. It is one of the best-preserved historical buildings in Gdansk. The structure is still of the city's infrastructural importance as through it goes a road connecting two districts. The Gate is now so neglected that it is hard to appreciate its value. The main purpose of the investigation carried out was to determine the harmfulness of the traffic on the structure as well as the reasons of...
-
Automatyzacja procesu pozyskiwania wiedzy dla systemów ekspertowych.**2003,187 s. 24 rys. 7 tab. bibliogr. 248 poz. Rozprawa doktorska (2003.12.02) PG, Wydz. Elektroniki, Telekomunikacji i Aytomatyki. Promotor: Prof. dr. hab. M. Białko
PublicationPodczs tworzenia systemow ekspertowych występuje problem pozyskania wiedzy zdanej dziedziny. Duże korzyści daje zastosowanie szkieletowych systemów eks-pertowych z wbudowanym modulem automatycznego pozyskiwania wiedzy z istnie-jacych baz danych. Zbudowano i opisano w pracy system CLIPS-XT posiadajacyoryginalne moduły: indukcyjnego wydobywania wiedzy z baz danych za pomocą generowania drzew decyzyjnych i ich konwersji na reguły...
-
Routing decisions independent of queuing delays in broadband leo networks
PublicationThis paper presents an analysis of queuing and propagation delays of Inter-Satellite Links (ISLs) in broadband Low-Earth Orbit (LEO) satellite networks. It is shown that queuing delays are negligible in all reasonable working conditions of the broadband ISL network. This fact makes it possible to simplify the routing protocols in such networks and permits using already known multi-commodity flow solutions for routing. The performance...
-
Linking music data in executable documents
PublicationThis paper presents the application of Interactive Open Document Architecture (IODA) to music and video data. This architecture was design to create multilayer documents which consist of many files. The paper shows the method of creating media documents on the basis of IODA. These kind of documents were called IODA Media Documents (IMD). IMD have links that connect many different kinds of files containing music and video data....
-
Digital technologies and women's empowerment – casting the bridges
PublicationThis work briefly discusses the nexuses between digital technology development and adoption across societies, and its potential impact on overall welfare through women’s economic empowerment. In the first section it sets out the context and background. Next, Section 2 demonstrates the state of access to and the use of digital technologies across the world. Section 3 intends to trace the causal links and channels of digital technologies'...
-
Proportional-Derivative and Model-based Controllers used for a Serial Type Manipulator in case of a Variable Mass Payload
PublicationIn the paper, numerical analysis of dynamics of a variable mass system is considered. Its reference example is a serial-like manipulator composed of revolute joints and rigid bodies. Payload of its gripper is considered as its variable mass element (mass and inertia irregularly between subsequent payloads). For the rest of the system, inertia parameters are considered as known (precisely identified during the assembling process)....
-
To meet or to connect? Face-to-face contacts vs ICT in cluster organisations
PublicationThe main purpose of the paper is to explore how cluster organisations (COs) take advantage of direct (F2F) and indirect (ICT) contacts in fulfilling their main roles. The paper addresses the research question: “How important are Information and Communication Technologies at each level of advancement of cluster cooperation?” The research was conducted in 2016 in four purposefully selected cluster organisations representing metal...
-
Does technology matter for economic development? Empirical evidence for Latin American Countries
PublicationThe spread of new Information and Communication Technologies (ICTs) has been recognized worldwide. ICTs are broadly perceived as tools facilitating economic growth and development, especially in backward countries. They are easy and cheap to adopt, require minimum skills for effective use, and bring opportunities for disadvantaged societies. They enable education, knowledge dissemination and sharing, and processing and storing...
-
Wavelet-based denoising method for real phonocardiography signal recorded by mobile devices in noisy environment
PublicationThe main obstacle in development of intelligent autodiagnosis medical systems based on the analysis of phonocardiography (PCG) signals is noise. The noise can be caused by digestive and respiration sounds, movements or even signals from the surrounding environment and it is characterized by wide frequency and intensity spectrum. This spectrum overlaps the heart tones spectrum, which makes the problem of PCG signal filtrating complex....
-
Peptide conjugates of lactoferricin analogues and antimicrobials—Design, chemical synthesis, evaluation of antimicrobial activity and mammalian cytotoxicity
PublicationEight new peptide conjugates composed of modified bovine lactoferricin truncated analogues (LFcinB) and oneof the three antimicrobials — ciprofloxacin (CIP), levofloxacin (LVX), and fluconazole (FLC) — were synthesized. Four different linkers were applied to connect a peptide and an antimicrobial agent. The FLC-containing peptidic conjugates were synthesized using the “click chemistry” method. This novel approach is reported here...
-
Search engine marketing jako istotne narzędzie komunikacji marketingowej
PublicationKomunikacja marketingowa firmy w Internecie musi uwzględniać tzw. marketing w wyszukiwarkach internetowych (SEM). O efektywnej obecności przedsiębiorstwa w Sieci można mówić, gdy łatwo znaleźć serwis internetowy uwzględniając organiczne wyniki wyszukiwania wyszukiwarek, reklamy typu pay-per-click, optymalizację kluczowych fraz, istotność linków przychodzących (zewnętrznych) oraz wartość zamieszczonych treści. Każdy element projektu...
-
Multicomponent layers for aluminium alloys surface consolidation
PublicationThe main reason of the surface modification of the components such as pistons and cylinder blocks made of cast aluminium alloys is to obtain high hardness, wear and corrosion resistance of the working surface for larger lifetime of the motor-car and aircraft engines. In that aspect, the new conception of development - by hybrid method - of surface layers containing manganese, nitrogen, sulphur (Mn-N-S) and manganese, nitrogen,...