Search
Filters
total: 567
filtered: 196
Search results for: REVENUE EQUALIZATION
-
Green aspects, developments and perspectives of liquid phase microextraction techniques
PublicationDetermination of analytes at trace levels in complex samples (e.g. biological or contaminated water or soils) are often required for the environmental assessment and monitoring as well as for scientific research in the field of environmental pollution. A limited number of analytical techniques are sensitive enough for the direct determination of trace components in samples and, because of that, a preliminary step of the analyte...
-
Operational Performance and Weld Bead Characteristics of Experimental Tubular-Wires for Underwater Welding
PublicationAiming to evaluate new formulations and their operational behavior underwater, two experimental tubular wires with different chemical compositions in their internal flux were initially manufactured, employing a pilot machine and a unique manufacturing process. Weld beads were deposited on a plate placed in a flat position inside a tank using a mechanized system and the IMC 300 welding power source. The work was done at a depth...
-
Enhanced gas sensing by graphene-silicon Schottky diodes under UV irradiation
PublicationThe effect of ultraviolet (UV) or blue irradiation on graphene/n-doped silicon Schottky junctions toward gas sensing was investigated. Schottky diodes were subjected to oxidizing nitrogen dioxide (NO2, 1–3 ppm) and reducing tetrahydrofuran (THF, 50–200 ppm), showing significantly different responses observed on the currentvoltage (I-V) characteristics, especially under UV light (275 nm). NO2 affected the resistive part of the forward region...
-
Managing knowledge in a tourism crisis: case study from Poland
PublicationPurpose: This study deals with a tourism organisation from Poland, which experienced not only the COVID-19 pandemic, but also the close war situation in Ukraine which caused a significant decrease in tourist traffic and revenues. Since, based on the literature, knowledge management can be useful for crisis management, this study aims to explore the role and usefulness of KM during crisis situations in tourism. Methodology: Qualitative...
-
Thermodynamic, ecological, and economic analysis of negative CO2 emission power plant using gasified sewage sludge
PublicationCurrently, sewage sludge is considered as a biomass, according to the Polish act on renewable energy sources from 20th of February 2015 and its novel version from 19th of July 2019. Possibility to utilize sewage sludge in gasification process is an additional advantage of the negative CO2 emissions power plant (nCO2PP). The work presents results of thermodynamic, ecological, and economical analysis using a zero-dimensional mathematical...
-
Towards Changes of Macro-Economic Structures in Middle Eastern Countries. Empirical Evidence for 1970–2018
PublicationMiddle East countries share a wide bundle of specific structural economic features and one of the latest is a high dependency of these economies on fossil fuels, which is quantitatively demonstrated through the share of oil and gas revenues in total export, but also in gross domestic product composition. This high economic dependency on natural resources on one hand has recently generated a material wealth of Middle Eastern countries...
-
Mobile virtual presence in civil engineering education and training
PublicationEducation technologies are on the cusp, emerging technologies connected with each other might reveal new added value in this field. In this paper, the author showed a framework for conducting civil engineering classes with a virtual presence on the construction site. The presented idea might be realized by use of the unnamed aerial vehicle equipped with 360 video camera. On-site activities are transmitted at a distance by GSM and...
-
The importance of trust and altruistic social orientation for COVID-19 distress
PublicationBackground: The COVID-19 pandemic, the biggest global health crisis in decades, has been a difficult experience for nations all over the world. In the present study we wanted to assess to what extent a positive attitude towards others, expressed in altruistic social orientation and a high level of trust, would be linked to lower levels of COVID-19 distress in infected and non-infected individuals. Participants and procedure:...
-
Modélisation d'ordre non entier des machines synchrones. Modèle fréquentiel non linéaire, identification des paramètres, calcul de la réponse temporelle.
PublicationDans les réseaux d'énergie électrique contemporains, on assiste à une diversification considérable des différentes sources d'énergie. L'énergie produite est transformée par une grande quantité de dispositifs électriques pour être finalement acheminée à diverses installations électriques. Il devient donc primordial d'améliorer les modèles des différents composants électriques afin de pouvoir prévoir les interactions entre eux et...
-
Application of 3D scanning and computer simulation techniques to assess the shape accuracy of welded components
PublicationWhile traditional measurement methods prove to be insufficient when facing more complex shapes and intricate challenges, increasingly efficient solutions are emerging in their place. 3D scanners in particular exhibit versatility. They clearly represent a useful tool in many fields with diverse requirements; thus, it is advisable to explore further areas of their potential applications, e.g., in quality control or reverse engineering....
-
Limited dissolution of transition metals in the nanocrystalline cerium (IV) oxide
PublicationNanocrystalline cerium (IV) oxides doped with transition metals have gained significant interest recently, mostly in the field of catalysis. Herein, we present the comprehensive studies on ceria doped with 10 mol.% of transition metals (Mn, Fe, Co, Ni or Cu) synthesized by the reverse microemulsion method. The aim of this work is to study the properties of those materials with the use of different complementary methods like XRD,...
-
High-Temperature Oxidation of Heavy Boron-Doped Diamond Electrodes: Microstructural and Electrochemical Performance Modification
PublicationIn this work, we reveal in detail the effects of high-temperature treatment in air at 600 °C on the microstructure as well as the physico-chemical and electrochemical properties of boron-doped diamond (BDD) electrodes. The thermal treatment of freshly grown BDD electrodes was applied, resulting in permanent structural modifications of surface depending on the exposure time. High temperature affects material corrosion, inducing...
-
Carbon nanoarchitectures as high-performance electrodes for the electrochemical oxidation of landfill leachate
PublicationNanomaterials and assemblies of the aforementioned into complex architectures constitute an opportunity to design efficient and selective solutions to wide spread and emerging environmental issues. The limited disposal of organic matter in modern landfills generates extremely concentrated leachates characterised by high concentrations of refractory compounds. Conventional biochemical treatment methods are unsuitable, while advanced...
-
Genetic Algorithm Approach for Gains Selection of Induction Machine Extended Speed Observer
PublicationThe subject of this paper is gains selection of an extended induction machine speed observer. A high number of gains makes manual gains selection difficult and due to nonlinear equations of the observer, well-known methods of gains selection for linear systems cannot be applied. A method based on genetic algorithms has been proposed instead. Such an approach requires multiple fitness function calls; therefore, using a quality index...
-
Recent Advances in Loop Heat Pipes with Flat Evaporator
PublicationThe focus of this review is to present the current advances in Loop Heat Pipes (LHP) with flat evaporators, which address the current challenges to the wide implementation of the technology. A recent advance in LHP is the design of flat-shaped evaporators, which is better suited to the geometry of discretely mounted electronics components (microprocessors) and therefore negate the need for an additional transfer surface (saddle)...
-
Relationship between Telomere Length, TERT Genetic Variability and TERT, TP53, SP1, MYC Gene Co-Expression in the Clinicopathological Profile of Breast Cancer
PublicationThe molecular mechanisms of telomerase reverse transcriptase (TERT) upregulation in breast cancer (BC) are complex. We compared genetic variability within TERT and telomere length with the clinical data of patients with BC. Additionally, we assessed the expression of the TERT, MYC, TP53 and SP1 genes in BC patients and in BC organoids (3D cell cultures obtained from breast cancer tissues). We observed the same correlation in the...
-
Numerical simulation of temperature distribution of heat flow on reservoir tanks connected in a series
PublicationThe flow of temperature distribution through a medium in thermodynamic studies plays an important role in understanding physical phenomena in chemical science and petroleum engineering, while temperature distribution indicates the degree of reaction that must be undergone to obtain the final product. Therefore, this paper aims to present and apply the exponential matrix algorithm (EMA), differential transformation algorithm (DTA),...
-
Tuning the ferromagnetic phase in the CDW compound SmNiC2 via chemical alloying
PublicationWe report a study on tuning the charge density wave (CDW) ferromagnet SmNiC2 to a weakly coupled superconductor by substituting La for Sm. X-ray diffraction measurements show that the doped compounds obey Vegard’s law, where La (Lu) alloying expands (shrinks) the lattice due to its larger (smaller) atomic size than Sm. In the series Sm1−xLaxNiC2, CDW transition (TCDW =148K) for SmNiC2 is gradually suppressed, while the ferromagnetic...
-
Labour share and income inequalities in the European Union, taking into account the level of development of economies
Publicationesearch background: The relationship between labour share and income inequality is a complex and multifaceted problem. Despite ongoing discussions among economists, there is still no consensus on the direction of the relationship between labour share and income ine-quality. Purpose of the article: The article aims to assess the impact of labour share on income inequal-ity, which is measured in three ways: the Gini index...
-
The role of glucuronidation in drug resistance
PublicationThe final therapeutic effect of a drug candidate, which is directed to a specific molecular target strongly depends on its absorption, distribution, metabolism and excretion (ADME). The disruption of at least one element of ADME may result in serious drug resistance. In this work we described the role of one element of this resistance: phase II metabolism with UDP-glucuronosyltransferases (UGTs). UGT function is the transformation...
-
Nanoparticles and nanofiltration for wastewater treatment: From polluted to fresh water
PublicationWater pollution poses significant threats to both ecosystems and human health. Mitigating this issue requires effective treatment of domestic wastewater to convert waste into bio-fertilizers and gas. Neglecting liquid waste treatment carries severe consequences for health and the environment. This review focuses on intelligent technologies for water and wastewater treatment, targeting waterborne diseases. It covers pollution prevention...
-
Nonlinear Control of a Doubly Fed Generator Supplied by a Current Source Inverter
PublicationNowadays, wind turbines based on a doubly fed induction generator (DFIG) are a commonly used solution in the wind industry. The standard converter topology used in these systems is the voltage source inverter (VSI). The use of reverse-blocking insulated gate bipolar transistor (RB-IGBT) in the current source inverter topology (CSI), which is an alternative topology, opens new possibilities of control methods. This paper presents...
-
Neurochemical changes underlying cognitive impairment in olfactory bulbectomized rats and the impact of the mGlu5-positive allosteric modulator CDPPB
PublicationThe olfactory bulbectomized (OBX) rat model is a well-established model of depression in which antidepressant drugs reverse deficits in the passive avoidance test 14 days after administration. Recently, the olfactory bulbectomized rat model has been proposed to be a model of Alzheimer’s disease (AD), and the available data indicate similarities between the changes that typically occur in AD and those observed in OBX animals. In...
-
Photoresponsive Amide-Based Derivatives of Azobenzene-4,4′-Dicarboxylic Acid—Experimental and Theoretical Studies
PublicationAzobenzene derivatives are one of the most important molecular switches for biological and material science applications. Although these systems represent a well-known group of compounds, there remains a need to identify the factors influencing their photochemical properties in order to design azobenzene-based technologies in a rational way. In this contribution, we describe the synthesis and characterization of two novel amides...
-
The good, the bad, and the ugly: space use and intraguild interactions among three opportunistic predators—cat (Felis catus), dog (Canis lupus familiaris), and red fox (Vulpes vulpes)—under human pressure
Publication -
Design and thermodynamic analysis of an H2O–LiBr AHP system for naval surface ship application
Publication -
Response to the queries raised by Dr M.M. Awad in a letter to editor comments on “Pressure drop of HFE7000 and HFE7100 during flow condensation in minichannels”
Publication.
-
Pressure drop of HFE7000 and HFE7100 during flow condensation in minichannels
PublicationAttention is focused on the issues of flow resistance and pressure drop of perspective refrigeration fluids during condensation in the two-phase flow in minichannels. The case of the flow through a cylindrical single channel of 2.3 mm inner diameter was carefully analyzed. Pressure drop tests have been performed in diabatic flow conditions. The effect of heat flux, mass flux, vapour quality and saturation temperature on the two-phase...
-
Detailed experimental investigations on frictional pressure drop of R134a during flow boiling in 5 mm diameter channel: The influence of acceleration pressure drop component =Études expérimentales détaillées sur la chute de pression frictionnelle du R134a lors de l'ébullition en écoulement dans un canal de 5 mm de diamètre : influence de la composante d'accélération de la chute de pression
PublicationThis article presents detailed two-phase diabatic pressure drop data for refrigerant R134a at a saturation pressure of 5.5 bar corresponding to the saturation temperature of 19.4 °C. Study cases have been set for a mass flux varying from 100 to 500 kg m−2 s−1. The obtained data are used as a validation of the void fraction literature models, a set of graphs shows comparisons, for a representative set of experimental conditions,...
-
Platelet RNA Sequencing Data Through the Lens of Machine Learning
PublicationLiquid biopsies offer minimally invasive diagnosis and monitoring of cancer disease. This biosource is often analyzed using sequencing, which generates highly complex data that can be used using machine learning tools. Nevertheless, validating the clinical applications of such methods is challenging. It requires: (a) using data from many patients; (b) verifying potential bias concerning sample collection; and (c) adding interpretability...
-
Oxygen concentration regulated the efficient liquefaction of vulcanized natural rubber
PublicationOxidative liquefaction represents a promising avenue for the homogeneous and high-value utilization of waste tire rubber. Given that truck tires predominantly comprise natural rubber (NR), this study investigated the efficient liquefaction of vulcanized NR regulated by oxygen concentration. Remarkably, the liquefaction of vulcanized NR was realized with an oxygen concentration of 75 % at 200 °C within 3 min. FTIR spectroscopy showed...
-
Effect of the welding environment and storage time of electrodes on the diffusible hydrogen content in deposited metal
PublicationIn the study the glycerin displacement method was used for determination of diffusible hydrogen content in deposited metal. Specimens were welded in the air and in the water with covered rutile electrodes. The first part of the specimens was made immediately after opening the package of the electrodes. The electrodes were then stored in opened packages in laboratory conditions that allowed for contact with the air for three years....
-
LABORATORIUM SZYBKIEGO PROTOTYPOWANIA : Inżynieria odwrotna
PublicationSzybkie prototypowanie (ang. Rapid Prototyping) i inżynieria odwrotna (ang. Reverse Engineering) są jednymi z najbardziej dynamicznie rozwijających się działów komputerowego wspomagania projektowania, wytwarzania i realizacji prac inżynierskich (CAD/CAM/CAE). Inżynieria odwrotna stanowi zwykle wyjściowy etap szybkiego prototypowania. Udostępnia ona metody generowania wirtualnych modeli 3D istniejących obiektów w wyniku ich pomiarów....
-
Establishing the allosteric mechanism in CRISPR‐Cas9
PublicationAllostery is a fundamental property of proteins, which regulates biochemical information transfer between spatially distant sites. Here, we report on the critical role of molecular dynamics (MD) simulations in discovering the mechanism of allosteric communication within CRISPR‐Cas9, a leading genome editing machinery with enormous promises for medicine and biotechnology. MD revealed how allostery intervenes during at least three...
-
The spindle speed optimal control as a mean of chatter vibration surveillance
PublicationNowa metoda nadzorowania drgań wirujących narzędzi w nowoczesnych frezarkach polega na wykorzystaniu sterowania optymalnego w układach niestacjonarnych przy energetycznym wskaźniku jakości. W rezultacie, sygnałem sterującym jest chwilowa zmiana prędkości obrotowej wrzeciona. Rozważano frezowanie czołowe smukłym frezem trzpieniowym. Wyniki symulacji komputerowych potwierdziły praktyczne uzasadnienie proponowanej metody. Drgania...
-
Enhancing chain-elongating microbiomes: Sequential fungi-bacteria cooperation for efficient food waste upgrading using endogenous electron donors
PublicationThe upgrading of organic waste such as food waste (FW) into medium-chain carboxylates (MCC) is within a bio-based circular economy concept. An efficient chain elongation (CE) microbiome is difficult to obtain, which normally requires long-term acclimatization and an exogenous supplement of electron donor (ED, especially ethanol). In this study, the CE microbiome was rapidly shaped within 18 days and an efficient endogenous ethanol-based...
-
The Relation Between Art and Physical Activity in the Public Space of the Contemporary City
PublicationArt has always been and still is a mirror in which human activity is reflected. One of the basic human activities is physical activity, thanks to which humans are able to satisfy their needs, improve health and also function in society. Therefore, there are different relationships between physical activity and art. Both of them are present in the public space of cities and this aspect of connection is addressed in the article. The...
-
Study of a Multicriterion Decision-Making Approach to the MQL Turning of AISI 304 Steel Using Hybrid Nanocutting Fluid
PublicationThe enormous use of cutting fluid in machining leads to an increase in machining costs, along with different health hazards. Cutting fluid can be used efficiently using the MQL (minimum quantity lubrication) method, which aids in improving the machining performance. This paper contains multiple responses, namely, force, surface roughness, and temperature, so there arises a need for a multicriteria optimization technique. Therefore,...
-
Education biases perception of social robots
Publication -
Be fearless: Positive affect as a mediator between venturesomeness and self-efficacy in future entrepreneurs and managers
PublicationIntroduction and objectives Self-efficacy, personality and different affect states in entrepreneurs and managers are important factors for effectiveness and well-being. The aim of the study was to examine in young adults during entrepreneurship-related education, the relationships between venturesomeness and self-efficacy, and the mediating effects of positive affect and positive emotions (joviality, self-assurance, attentiveness)...
-
Novel DNA-binding protein from Nanoarchaeum equitans Kin4-M binds all kinds of nucleic acids
PublicationNanoarchaeum equitans is the only known representative of Archaea phylum Nanoarchaeota and stands out as one of the tiniest known living organism. What is more it has smallest genome, which is only 490.885 base pairs long. It is also one of the most compact genomes. According to predictions about 95% of the DNA encodes proteins or stable RNA. Nanoarchaeum equitans lacks genes for most vital metabolic pathways including lipid, cofactor,...
-
Nanoparticles preparation using microemulsion systems
PublicationMetallic nanoparticles become of current interests because they exhibit unique properties compared with those of metal atoms or bulk metal due to the quantum size effect and their large surface area, which make them attractive for applications in optics, electronics, catalysis biology and medicine. TiO2 has been used for environmental remediation purposes such as in the purification of water and air and also solar-to chemical energy...
-
Experiencing the Ocean the Paths for Urban Development of Sao Pedro do Estoril in Lisbon Metropolitan Area
PublicationThe areas of Cascais Municipality, one of the richest Municipalities in Portugal, located west to Lisbon, at the estuary of Tagus and the Atlantic Ocean coast is popular tourist destination. With its unique landscape it became the most attractive venue for spending vacations, for sport activities and leisure. It arose around the coastal town of Cascais, the former fishing village famous as a refuge for notables and claiming to...
-
The Unrestricted Global effort to complete the Closed Or Open after Source Control Laparotomy for Severe Complicated Intra-Abdominal Sepsis (COOL) Trial
Publication -
The unrestricted global effort to complete the COOL trial
Publication -
Elective surgery system strengthening: development, measurement, and validation of the surgical preparedness index across 1632 hospitals in 119 countries
Publication