Search results for: DESTRUCTIVE ENTREPRENEURSHIP
-
Noise spectral density computation based on finite element model of piezoceramic sensor
PublicationThe high sensitivity with wide bandwidth is required for sensor applications in non-destructive testing (NDT). The sensitivity of piezoceramic sensors demands to minimize their noise especially thermal noise, polarisation noise and low frequency 1/f noise,which are the main sources of voltage or current fluctuation in this sort of sensors. For simplicity, only the piezoceramic part of sensor was under study. the theoretical and...
-
Reduction of Derivative pipeline effort in water turbine
PublicationThe paper presents an approach to evaluate and reduce the effort of the derivative pipeline in a water turbine of a hydrostatic power station in its vulnerable spots. Potential places of the biggest effort of the structure, as well as the coefficient of displacement and safety factor related to them were identified using FEM numerical method. Pipeline reinforcement was designed and made based on FEM analysis. Original technology...
-
Experimental and numerical investigations for GPR evaluation of reinforced concrete footbridge
PublicationThe GPR method has increasingly found application in non-destructive testing of reinforced concrete structures. This paper presents the new approach of modelling of the electromagnetic wave propagation for reinforced concrete structures with a complex system of the reinforcement. Simulations of the GPR field were performed on a three-dimensional model of a footbridge using the FDTD method. Numerical maps were compared with results...
-
Exergy analysis of a negative CO2 emission gas power plant based on water oxy-combustion of syngas from sewage sludge gasification and CCS
PublicationA power cycle with water-injected oxy-combustion (water cycle) is investigated by exergy analysis. It is fueled with syngas (aka. producer gas) from gasification of sewage sludge. The cycle is equipped with a spray-ejector condenser (SEC). CO2 is separated and compressed for transportation and storage. The net delivered electric power is 31% of the fuel exergy. The task efficiency is 39% when the flue gas bleed to gasification...
-
Przedsiębiorczość międzynarodowa jako nowy obszar badań w teorii internacjonalizacji
PublicationPomimo iż przedsiębiorczość międzynarodowa (international entrepreneurship) pojawiła się w literaturze przedmiotu w końcu lat 80. XX w., to jej intensywny rozwój rozpoczął się prawie dekadę później, tj. od połowy lat 90. XX w. i trwa do dzisiaj. Obecnie szkoła przedsiębiorczości międzynarodowej rozwija się na pograniczu przedsiębiorczości i biznesu międzynarodowego oraz teorii internacjonalizacji. W niniejszym opracowaniu omówiono...
-
Obraz przedsiębiorczości w Polsce w badaniach GEM
PublicationWraz ze stale rosnącą popularnością badań nad przedsiębiorczością rośnie też zainteresowanie i skala wykorzystywania danych pochodzących z raportów Global Entrepreneurship Monitor. W niniejszym artykule wykorzystano te dane do nakreślenia ogólnego obrazu przedsiębiorczości w Polsce, a w końcowej części przybliżono pewne problemy wynikające z metodyki prowadzenia tych badań. Ta krytyczna analiza ma na celu przyczynienie się do bardziej...
-
Intencje przedsiębiorcze studentów – analiza międzynarodowa oparta na rozszerzonym modelu Ajzena
PublicationPoszukiwanie czynników wpływających na rozpoczęcie działalności gospodarczej doczekało się opisu w wielu publikacjach. Nie ma wątpliwości, że czynnikiem kluczowym w procesie przedsiębiorczym są intencje, a dzięki pracom I. Ajzena wiadomo także, jakie grupy czynników wpływają na intencje. Jednak jego teoria planowanego zachowania wydaje się być niewystarczająca. Celem rozdziału było opracowanie propozycji rozszerzenia teorii Ajzena....
-
Wykorzystanie metafor w identyfikacji i kształtowaniu postaw przedsiębiorczych
PublicationEdukacja przedsiębiorcza odgrywa coraz większą rolę w promowaniu i kształtowaniu zachowań oraz kompetencji przedsiębiorczych młodego pokolenia. W tym kontekście szczególnie podkreśla się znaczenie wykorzystywania nowych, interaktywnych metod i form kształcenia, niezwykle istotnych dla jednego z aspektów edukacji przedsiębiorczej, jakim jest kształcenie kreatywności i proaktywności. Zastosowanie metafor spełnia wymagania stawiane...
-
Evaluating Business Accelerator Participants’ Experiences – Effectuation at Play?
PublicationResponding to the new phenomena in entrepreneurship ecosystems in Poland, the author undertakes the study that aims to explore experiences of participants of (pre)accelerator programme for start-ups. Clipster is a business an acceleration and incubation programme, where participants have a unique co-living opportunity and work on their new venture ideas. With phenomenological interviews with six nascent entrepreneurs - participants...
-
Evaluating Business Accelerator Participants’ Experiences – Effectuation at Play?
PublicationResponding to the new phenomena in entrepreneurship ecosystems in Poland, the author undertakes the study that aims to explore experiences of participants of (pre)accelerator programme for start-ups. Clipster is a business an acceleration incubation programme, where participants have a unique co-living opportunity and work on their new venture ideas. With phenomenological interviews with six nascent entrepreneurs - participants...
-
Dlaczego tak mało wiemy o wzroście małych i średnich przedsiębiorstw - subiektywizm w badaniach
PublicationRozwój przedsiębiorstwa jako przedmiot badań, doczekał się wielu opracowań literaturowych (patrz: Birch, Storey, Davidsson, Demar, Wiklund, Coad, Wasilczuk, Matejun itd.), jednak cały czas brakuje odpowiedzi na pytanie dlaczego małe firmy wzrastają i jakie czynniki na ten wzrost wpływają. Brak wiedzy na ten temat nie wynika z braku chęci badawczych, a raczej z nadmiaru problemów z takimi badaniami związanymi. Osoby prowadzące badania...
-
Malignant melanoma, NOS - Unknown, 58 - Tissue image [3300730069403601]
Open Research DataThis is the histopathological image of ACCESSORY SINUSES tissue sample obtained in Medical University Gdańsk and deposited in ZMDL-GUMED. The sample image was taken using: Pannoramic 250 3DHistech slide scanner (20x magnification) and saved to DICOM format.
-
Malignant melanoma, NOS - Unknown, 58 - Tissue image [3300730069404801]
Open Research DataThis is the histopathological image of ACCESSORY SINUSES tissue sample obtained in Medical University Gdańsk and deposited in ZMDL-GUMED. The sample image was taken using: Pannoramic 250 3DHistech slide scanner (20x magnification) and saved to DICOM format.
-
Malignant melanoma, NOS - Unknown, 58 - Tissue image [3300730069404351]
Open Research DataThis is the histopathological image of ACCESSORY SINUSES tissue sample obtained in Medical University Gdańsk and deposited in ZMDL-GUMED. The sample image was taken using: Pannoramic 250 3DHistech slide scanner (20x magnification) and saved to DICOM format.
-
Malignant melanoma, NOS - Unknown, 58 - Tissue image [3301001549114601]
Open Research DataThis is the histopathological image of ACCESSORY SINUSES tissue sample obtained in Medical University Gdańsk and deposited in ZMDL-GUMED. The sample image was taken using: Pannoramic 250 3DHistech slide scanner (20x magnification) and saved to DICOM format.
-
Malignant melanoma, NOS - Unknown, 58 - Tissue image [3300730069409371]
Open Research DataThis is the histopathological image of ACCESSORY SINUSES tissue sample obtained in Medical University Gdańsk and deposited in ZMDL-GUMED. The sample image was taken using: Pannoramic 250 3DHistech slide scanner (20x magnification) and saved to DICOM format.
-
Malignant melanoma, NOS - Unknown, 58 - Tissue image [3300730069403321]
Open Research DataThis is the histopathological image of ACCESSORY SINUSES tissue sample obtained in Medical University Gdańsk and deposited in ZMDL-GUMED. The sample image was taken using: Pannoramic 250 3DHistech slide scanner (20x magnification) and saved to DICOM format.
-
Malignant melanoma, NOS - Unknown, 58 - Tissue image [3300730069403801]
Open Research DataThis is the histopathological image of ACCESSORY SINUSES tissue sample obtained in Medical University Gdańsk and deposited in ZMDL-GUMED. The sample image was taken using: Pannoramic 250 3DHistech slide scanner (20x magnification) and saved to DICOM format.
-
Malignant melanoma, NOS - Unknown, 58 - Tissue image [3300730069409671]
Open Research DataThis is the histopathological image of ACCESSORY SINUSES tissue sample obtained in Medical University Gdańsk and deposited in ZMDL-GUMED. The sample image was taken using: Pannoramic 250 3DHistech slide scanner (20x magnification) and saved to DICOM format.
-
Malignant melanoma, NOS - Unknown, 58 - Tissue image [330073006940661]
Open Research DataThis is the histopathological image of ACCESSORY SINUSES tissue sample obtained in Medical University Gdańsk and deposited in ZMDL-GUMED. The sample image was taken using: Pannoramic 250 3DHistech slide scanner (20x magnification) and saved to DICOM format.
-
Malignant melanoma, NOS - Unknown, 58 - Tissue image [3300730069408511]
Open Research DataThis is the histopathological image of ACCESSORY SINUSES tissue sample obtained in Medical University Gdańsk and deposited in ZMDL-GUMED. The sample image was taken using: Pannoramic 250 3DHistech slide scanner (20x magnification) and saved to DICOM format.
-
Chromium Cluster Luminescence: Advancing Near‐Infrared Light‐Emitting Diode Design for Next‐Generation Broadband Compact Light Sources
Open Research DataIn modern technology devices, an energy-saving miniature near-infrared (NIR) light source plays a critical role in non-destructive, non-invasive sensing applications and further advancement of technology. This dataset reports the broadband NIR luminescence of Cr3+ clusters for designing phosphor-converted NIR light-emitting diodes as an alternative...
-
Quality assessment of high voltage varistors by third harmonic index
PublicationHigh voltage varistors that consist of grained ZnO have to be tested before assembling into a surge arrester. The existing methods demand a usage of high voltages and intensive currents that is inconvenient, destructive and needs extensive power consumption. Additionally, these methods require metallization of the prepared varistor structures that increases costs. We propose another method of varistors quality assessments by a...
-
Characterization of Corrosion-Induced Fracture in Reinforced Concrete Beams Using Electrical Potential, Ultrasound and Low-Frequency Vibration
PublicationThe paper deals with the non-destructive experimental testing of the reinforced concrete beams under progressive corrosion. A series of experiments using electrical potential, ultrasound and low-frequency vibrations techniques are reported. Electrical potential and natural frequencies were used to characterise and monitor the corrosion process at its initial state. The P-wave velocity measurements were proved to be effective in...
-
Assessment of fitness for service of Cr-Mo steel tubes in catalytic reforming charge heaters
PublicationIn this paper characteristic features of metal dusting corrosion in high temperature gas mixtures of high carbon activity in catalytic reforming units, including Continuous Catalyst Regeneration (CCR) platformer are presented. Examples of 2.25Cr-1Mo and 9Cr-1Mo steel tubes at advanced stages of metal dusting process after long-term service in charge heaters are used to prove that destructive examinations are necessary to provide...
-
Modal properties identification of a novel sandwich footbridge – Comparison of measured dynamic response and FEA
PublicationA modern sandwich composite footbridge made of high-tech materials, being an example of practical application of laminated composites in civil engineering, is presented. The in situ non-destructive testing of the footbridge, aiming to identify modal properties and pedestrian comfort, is described. The measured eigenmodes and eigenfrequencies are compared with numerically estimated values. Finite element analyses of the footbridge...
-
Approach to evaluation of time to the critical degradation of ship pipelines
PublicationIn the article an approach to the problem of estimating time to the critical degradation of ship pipelines is considered. Such an assessment would consist of six stages. The fundamental idea is to include to the estimation of time to failure of pipelines such elements like: materials that the pipelines are made, destructive physical phenomena taking place in them and applied means of protection. The result of that evaluation should...
-
Classification of high-voltage varistors into groups of differentiated quality
PublicationThe research was aimed on defining a factor of quality for high-voltage varistors using Non-Destructive Testing (NDT) techniques, which could be applied during the production testing. The newly proposed parameter Q determined on the basis of the lowest resonant frequency fr measured within the preselected frequency range was taken into account. The parameter Q was defined for ZnO structures after firing, without metallized contacts....
-
Niekorzystny wpływ przekształtnikowego zasilania PWM na silniki asynchroniczne trakcyjne
PublicationThe electric traction drives with an AC motor fed by a frequency converter are used more and more often nowadays. The most significant side effects, of a converter's output voltage forming PWM method for AC motor windings, are steep voltage changes, which can initiate several destructive phenomena. The paper presents the adverse influence of a converter common mode voltage on the motor windings' increased voltage exposure and the...
-
Adaptation of Architectural Heritage in the Era of Climate Change. Torpedo Platform in Babie Doły
PublicationThe paper provides original insight into the problem of adap¬tation of historical objects in the era of climate change. It conveys a message that in times of climate crisis, there is a need to go beyond an anthropocentric perspective, specifically, that architec¬ture should not only be designed for people, but should also provide a framework for nature. As well as shaping spaces for human beings, the architect is also responsible...
-
Family business experience and the probability of starting a venture: gender differences in Poland
PublicationThe aim of this study is to analyse whether the experience of working in a family member’s business is related differently to the assessed probabilities of men and women starting their own new venture in the future. The research is conducted on a sample of 334 Polish undergraduate students. Poland is an efficiency-driven European economy with a substantial gender gap in entrepreneurship. The results obtained indicate that the relationship...
-
Małgorzata Gawrycka dr hab.
PeopleMałgorzata Gawrycka, a graduate of the Faculty of Management at the University of Gdańsk, PhD in economics. From 2012-2020, deputy dean for teaching at the Faculty of Management and Economics of the Gdańsk University of Technology. Currently Dean of the Faculty. Scientific interests focus on issues related to the macroeconomic policy of the state. In particular, the problems of the situation on the labour market, demographic changes,...
-
THE METHOD OF ANALYSIS OF DAMAGE REINFORCED CONCRETE BEAMS USING TERRESTRIAL LASER SCANNING
PublicationThe authors present an analysis of the possibility to assess deformations and mode of failure of R-C beams using terrestrial laser scanning. As part of experiments carried out at the Regional Laboratory of Construction (at Gdansk University of Technology), reinforced concrete beams were subjected to destruction by bending and by shear. The process of press impact on the reinforced concrete beam was recorded using terrestrial laser...
-
Przedsiębiorczość społeczna w społeczeństwie obywatelskim w Polsce
PublicationW artykule przedstawiono koncepcję i zakres zjawiska przedsiębiorczości społecznej w Polsce, w kontekście funkcjonowania społeczeństwa obywatelskiego. W tym celu autorka analizuje dominujące szkoły badań nad zjawiskiem przedsiębiorczości społecznej, identyfikuje i charakteryzuje podstawowe modele przedsiębiorstw społecznych w Polsce oraz wskazuje na wyzwania związane z badaniem tego typu organizacji. Autorka przedstawia i poddaje...
-
Weldability of S500MC Steel in Underwater Conditions
PublicationWet welding with the use of covered electrodes is one of the methods of underwater welding. This method is the oldest, the most economic and the most versatile. The main difficulties during underwater wet welding are: high cooling rates of the joint, the presence of hydrogen in the arc area and formation of hard martensitic structure in the weld. These phenomena are often accompanied by porosity of welds and large number of spatters,...
-
An odor-sensing system - powerful technique for foodstuff studies
PublicationThis work examines gas sensor array technology combined with multivariate data processing methods and demonstrates a promising potential for rapid, non-destructive analysis of food. Main attention is focused on detailed description of sensor used in e-nose instruments, construction, and principle of operation of these systems. Moreover, this paper briefly reviews the progress in the field of artificial olfaction and future trends...
-
COLD CRACKING OF S460N STEEL WELDED IN WATER ENVIRONMENT
PublicationThis paper shows results of weldability testing of fine-grained high -strength low- alloy S460N steel welded in water environment by covered electrodes. The tests were carried out by using the CTS test specimens with fillet welds. Four specimens were welded under water and one specimen in air. Welded joints were subjected to non-destructive visual and penetration tests. The accepted joints were then subjected to macroscopic and...
-
Dynamics analysis of footbridge mode shapes the s8 expressway on the basis of the results of in situ tests
PublicationNon-destructive diagnostics for structure may use dynamic measurements realized during vibrations of a facility induced by dynamic environmental impact, enforced by the use of inductors or impulse impact. Dynamic tests and the analysis were undertaken for a footbridge situated over the expressway S8. The studies in situ allowed for dynamic characteristics to be determined: frequency, shape modes and damping for respective frequency...
-
Elemental composition of deposited sediments at the tram-route junction
Open Research DataThis data set contains the elemental composition results of deposited sediments collected at the tram-route junction in Gdańsk. Sample collection began in July 2022, when the tram lines were completed and before the rails were scrubbed (27/07/2022). The second sample round was carried out following rail scrubbing in October 2022 (7/10/2022). Since February...
-
A breath of fresh air - social cognitive career theory in studying entrepreneurial intentions
PublicationA pinch of robustness and a pinch of freshness create an interesting story. That is why this study focuses on entrepreneurial intentions from an alternative theoretical perspective in an underexplored context. In this paper, it is argued that social cognitive career theory is relevant to the study of individual entrepreneurial cognition and behaviour, and it offers a solid framework in entrepreneurship research. This paper expands...
-
The Hanseatic City Challenge
EventsSee more at www.hanseaticcitychallenge.com
-
Wave propagation in damage assessment of ground anchors
PublicationThe inspection possibilities of ground anchors are limited to destructive test such as pull-out test. Guided wave propagation gives an opportunity to develop an inspection system dedicated to determine the condition of inspected element without violation of their integrity. In this paper the experimental study on wave propagation in laboratory models of ground anchors are presented. Experiments were conducted for different bonding...
-
Polarization-sensitive optical coherence tomography for ceramic materials inspection
PublicationCeramics production is looking for a fast, reliable and non-destructive method that can be implemented on site for defect detection and analysis. In this paper we present polarization-sensitive optical coherence tomography (PS-OCT) as a method for defect inspection. Proposed extensions to standard OCT provide additional information for complete characterization of tested object. We compare OCT and microscope imaging that can easily...
-
DETECTION OF DEBONDING IN STEEL BARS EMBEDDED IN CONCRETE USING GUIDED WAVE PROPAGATION
PublicationThe paper presents a non-destructive diagnostic technique based on guided wave propagation phenomenon used to assess the adhesive bonding between a steel bar and a concrete cover. Double-layered cylindrical specimens with different levels of debonding and its location were investigated. The influence of bonding length on the excitation of multiple modes of longitudinal guided waves was analysed. Numerical simulations of guided...
-
Influence of Thermal Decomposition of Wood and Wood-Based Materials on the State of the Atmospheric Air. Emissions of Toxic Compounds and Greenhouse Gases
PublicationThis paper presents the energy characteristics of wood and wood-based materials in the form of commercially available pellets, furniture board (MDF) and OSB. Toxicometric indices were determined for gaseous destructs arising from thermal decomposition and combustion of the materials studied. The paper proves that combustion conditions are crucial in terms of toxic destructive emissions. It has been shown that the combustion of...
-
Assessment of Wooden Beams from Historical Buildings Using Ultrasonic Transmission Tomography
PublicationThe main goal of this study was non-destructive evaluation of wooden elements using ultrasonic waves. The inspection was carried out on wooden beams from a historical object. Elastic wave signals were processed by ultrasonic transmission tomography to obtain imaging of the internal structure of tested elements without disturbing their state and integrity. The focus was on the influence of wood anisotropy on the propagation of ultrasonic...
-
Influence of geotechnical conditions on damage states of Gdansk Bay Coast cliff formations
PublicationA geotechnical aspect of destruction processes of seashores was identified based on the case of erosion of Gdansk Bay Coast cliff formations. Causative factors of landslide were described in the context of natural phenomena, land development and its anthropogenic transformations. Possible directions of theoretical analysis of changes in groundwater relations were indicated.
-
What makes them dream big? Determinants of business growth aspirations among Polish students
PublicationThe objective of the article is to explore the concept of business growth aspirations and identify its determinants at an early stage of the entrepreneurial process. In this exploratory study, I focused on the underexplored approach to entrepreneurial process i.e. to study the growth aspirations and its determinants alongside entrepreneurial intentions. Studying growth aspirations and their determinants provides valuable insights...
-
PA32 aluminum alloy - tensile properties
Open Research DataIn addition to steel, aluminium alloys are the main building material used in the shipbuilding industry. Due to its undoubted advantages, such as low density (nearly three times lower than in the case of steel for shipbuilding) and high corrosion resistance, it is often used for hulls of yachts and small vessels as well as superstructures. For safety...
-
Strucutral steel - tensile test results
Open Research DataModern floating structures such as ships, oil platforms and offshore wind towers are built mostly of structural steel. It is a material that is subject to requirements which, when met, allows the construction and safe operation of the structure throughout its entire work cycle. One of the basic criteria that a material must meet is its strength. The...