Publications
Filters
total: 568
Catalog Publications
-
Matrix Strengthening the Identification of Observations with Split Functional Models in the Squared Msplit(q) Estimation Process
Publication -
Matrix Strengthening the Identification of Observations with Split Functional Models in the Squared Msplit(q) Estimation Process
PublicationThis article addresses the issue of raising the level of identification of observations with either single or more split functional models in the squared Msplit(q) estimation process. The theoretical part of the study presents the theoretical grounds for the classical method for estimating parameters in a split functional model and proposes a modification of the computational algorithm to increase the quality of the determinations...
-
Analyzing the Impact of Simulated Multispectral Images on Water Classification Accuracy by Means of Spectral Characteristics
PublicationRemote sensing is widely applied in examining the parameters of the state and quality of water. Spectral characteristics of water are strictly connected with the dispersion of electromagnetic radiation by suspended matter and the absorp-tion of radiation by water and chlorophyll a and b.Multispectral sensor ALI has bands within the ranges of electromagnetic radia-tion: blue and infrared, absent in sensors such as Landsat, SPOT,...
-
Evaluation of the Effectiveness of Methods for Delimitation of the Boundaries of Registered Parcels in the Process of Modernization of Land and Building Registration
PublicationIn the article, a comparative analysis of two methods for delimitation of the boundaries of registered parcels was carried out: the method of direct measurement in the field and the photogrammetric method. One of the analyzed factors was the attendance of parcels’ owners during the development of boundary recognition agreements. Research has shown that in this aspect the method of direct measurement...
-
Automated Parameter Determination for Horizontal Curves for the Purposes of Road Safety Models with the Use of the Global Positioning System
PublicationThis paper presents the results of research conducted to develop an automated system capable of determining parameters for horizontal curves. The system presented in this article could calculate the actual course of a road by means of a two-stage positioning of recorded points along the road. In the first stage, measurements were taken with a Real-Time Network (RTN) receiver installed in a research vehicle. In the second stage,...
-
Very high altitude micro air vehicle deployment method
PublicationThe paper presents the original work and method for high altitude micro air vehicle deployment. The method is based on the scientific ballooning, and adapted for stratospheric flight of commercial off-the-shelf micro air vehicle in flying wing configuration. The High Altitude Micro Air Vehicle, built for this research, was deployed during a test experiment at the lower level of the stratosphere. The results of the experiment and...
-
Sensors in River Information Services of the Odra River in Poland: Current State and Planned Extension
PublicationAccording to adopted in 2016 by the polish Council of Ministers assumptions for the plans for the progress of inland waterways in Poland for the years 2016-2020, with the perspective of 2030, assume that by 2030 Odra along its entire length and the Vistula from Warsaw to Gdansk, they will have become international shipping routes, which will be implemented system of River Information Services (RIS). Aspects of RIS sensor application...
-
An Algorithm for Optimizing the Determination of Cycling Routes on the Example of the Gdansk Agglomeration
PublicationPhysical activity is an essential part of a healthy lifestyle. One of the manifestations of the change in a society type from consumer to information one is the understanding of the importance of ecology and a healthy lifestyle. This is evident, inter alia, in the inventiveness and involvement of the society in the start-up and solutions referred to as the Smart City. One example is the development of e-bike rental and local investments...
-
The Use of Gravimetric Measurements to Determine the Orthometric Height of the Benchmark in the Port of Gdynia
PublicationThis paper contains a description of the technology used to make gravimetric measurements of the height of a reference point located in the Port of Gdynia, Poland. Measurements were made using a CG-5 gravimeter manufactured by LaCoste & Romberg Scintrex Inc., and determinations of position used a Leica Viva GS15 receiver integrated with a network of HxGN SmartNet GNSS reference stations. The measuring methodology required gravimeter...
-
Photogrammetric and total station's measurement of compressed column's model
PublicationModelling studies continue to play an important role. One of such study is stress determination in the reinforcement bars of reinforced columns and determine column's axis deformation. The article presents measurements results of control points located on the model of reinforced concrete column. The column was compressed in few series till it's destruction. In this studies, photogrammetric method and total station measurements...
-
An Archaeological - Architectural Documentation Based on Close Range Photogrammetry
PublicationWisłoujście Fortress is a historical defensive object located on the southwest coast of the Gulf of Gdańsk. Fort Carre, Eastern Sconce and Ravelin are parts of this postmediaeval fortification. In view of planned regeneration of this fortification complex, at the initiative of the Gdańsk History Museum and Institute of Archaeology and Ethnology of the University of Gdańsk it was decided to perform a documentation of one Fortress...
-
ASSESSMENT OF CLIFF STABILITY AFTER THE DEMOLITION OF THE ENGINEERING FACILITIES
PublicationAs a part of an experiment, cliff in Gdynia Redlowo (southern coast of Baltic Sea, Gdansk Bay) was measured using terrestrial laser scanner. The main reason for taking up the subject of the Orlowo Cliff’s stability was a decision about controlled removal one of the war fortification elements. The main purpose of that analysis was to specify suitability of laser scanning in determination of slope’s stability after a violent event....
-
Application of Regression Line to Obtain Specified Number of Points in Reduced Large Datasets
PublicationModern measurement techniques like scanning technology or sonar measurements, provide large datasets, which are a reliable source of information about measured object, however such datasets are sometimes difficult to develop. Therefore, the algorithms for reducing the number of such sets are incorporated into their processing. In the reduction algorithms based on the...
-
Displacement measurements during load testing of railway arch bridge
PublicationThe paper discusses issues concerning load tests carried out on a twin-track, arch railway bridge over the Martwa Wisla river in Gdansk. Currently, it is the bridge with the longest span in its class in Poland. The load-bearing structure consists of three no-hinge arches and an orthotropic deck suspended from them. The studies of the structure assumed the performing of static and dynamic tests. The paper presents the method for...
-
Bridge Non-Destructive Measurements Using a Laser Scanning during Acceptance Testing: Case Study
PublicationOwing to the recent proliferation of inventory works on roads and railways, bridge acceptance tests have increased exponentially. These tests’ results are often misinterpreted owing to the use of various measuring equipment types, rendering integrated interpretation problematic. It is also problematic that adjusting the measurement method is difficult when the structure’s response to load is uncertain. Therefore, it is important...
-
Sensors and System for Vehicle Navigation
PublicationIn recent years, vehicle navigation, in particular autonomous navigation, has been at the center of several major developments, both in civilian and defense applications. New technologies, such as multisensory data fusion, big data processing, or deep learning, are changing the quality of areas of applications, improving the sensors and systems used. Recently, the influence of artificial intelligence on sensor data processing and...
-
Correction of determined coordinates of railway tracks in mobile satellite measurements
Publication -
Review of Shoreline Extraction Methods from Aerial Laser Scanning
PublicationAutonomous technologies are increasingly used in various areas of science. The use of unmanned vehicles for hydrographic surveys in shallow coastal areas requires accurate estimation of shoreline position. This is a nontrivial task, which can be performed using a wide range of sensors and methods. The aim of the publication is to review shoreline extraction methods based solely on data from aerial laser scanning (ALS). This narrative...
-
Comparative Analysis of Unmanned Aerial Vehicles Used in Photogrammetric Surveys
PublicationThere are many manufacturers on the market offering various types of Unmanned Aerial Vehicles (UAV). The multitude of drones available on the market means that the choice of a UAV for a specific application appears to be a decision problem to be solved. The aim of this article is a comparative analysis of drones used in photogrammetric surveys. The criteria for evaluating the UAVs were: availability and product support, payload...
-
4D Models in World Wide Web
PublicationThe paper presents some results of research curried out within the framework of the European project named "Cultural Heritage Through Time" (CHT2). One of the main project aims were to develop a methodology for sharing multi-temporal information via the Internet (webGIS) for remote analysis of structures and landscapes over time. Reported in this paper results are focused on testing two technologies (Hexagon and Esri) for online...
-
Impact of Galileo Observations on the Position and Ambiguities Estimation of GNSS Reference Stations
PublicationDevelopment of Galileo navigation system has caused that it is increasingly used in various areas. One of the most important of them is precise positioning of the reference networks. In this paper we present the impact of Galileo observations on the differential precise positioning as well as ambiguities resolution of selected GNSS stations. We tested five different solutions: GPS-only, Galileo-only, GPS/Galileo, GPS/GLONASS and...
-
Photogrammetric Development Of The Threshold Water At The Dam On The Vistula River In Wloclawek From Unmanned Aerial Vehicles (Uav)
PublicationBarrage in Wloclawek (Poland) was designed by Hydroprojekt and built in the years of 1962 - 1970 as the first stage of the planned Lower Vist ula Cascade. Cascade design assumed the construction of 8 dams in Wyszogr o d, Plock, Wloclawek, Nieszawa (Ciechocinek as an option), Solec Kujawski, Chelmno, Opalen and Tczew. Nieszawa dam was supposed to ensure the maintenance of an adequate free surface...
-
System of monitoring of the Forest Opera in Sopot structure and roofing
PublicationThe authors present a solution realized in Forest Opera (name in Polish: Opera Leśna) in Sopot (Poland) in connection with the modernization and construction of a new roof. The complicated structure of the roof of the facility and the used covering in form of membrane made of technical fabric required (for security reasons) to install the unit of devices allowing for the continuous geodetic monitoring of the facility. Monitoring...
-
A commercial of the shelf components for a unmanned air vehicle photogrammetry
PublicationA photogrammetry from a unmanned aerial vehicle (UAV) can be understood as a new measurement tool. Is introduces a low-cost alternatives for a traditional aerial photogrammetry. A commercial off-the-shelf products (COTS), that are commercially available for a costumers, are the standard manufactures products, not custom. COTS products are available in the commercial market and can be bought and used under government contract. That...
-
Low-Level Aerial Photogrammetry as a Source of Supplementary Data for ALS Measurements
PublicationThe development of laser scanning technology ALS allows to make high-resolution measurements for large areas result-ing in significant reduction of costs. The main stakeholders at heights data received from the airborne laser scanning is mainly state administration. The state institutions appear among projects such as ISOK. Each point is classified in ac-cordance with the standard LAS 1.2, our research focuses on the class 6 -...
-
Influence of datasets decreased by applying reduction and generation methods on Digital Terrain Models
PublicationThe number of point clouds provided by LiDAR technology can be sometimes seen as a problem in development and further processing for given purposes (e.g. Digital Terrain Model (DTM) generation). Therefore, there is still a need to reduce the obtained big datasets. Reducing can be done, inter alia, by reducing the size of the set or by generating the set. This paper presents two variants of the reduction of point clouds in order...
-
Radar and Sonar Imaging and Processing (2nd Edition)
PublicationThe 14 papers (from 29 submitted) published in the Special Issue “Radar and Sonar Imaging Processing (2nd Edition)” highlight a variety of topics related to remote sensing with radar and sonar sensors. The sequence of articles included in the SI deal with a broad profile of aspects of the use of radar and sonar images in line with the latest scientific trends, in which the latest developments in science, including artificial intelligence,...
-
Clinical anatomy of the spatial structure of the right ventricular outflow trac
PublicationBackground. The right ventricular outflow tract (RVOT) is located above the supraventricular crest and reaches the level of the pulmonary valve. Detailed knowledge of the RVOT spatial structure and its morphology is extremely important for cardiac invasive therapeutic procedures. Objectives. To examine the spatial structure of the RVOT using virtual models of the right ventricle (RV) interior obtained post mortem. Material and...
-
Seven Different Lighting Conditions in Photogrammetric Studies of a 3D Urban Mock-Up
PublicationOne of the most important elements during photogrammetric studies is the appropriate lighting of the object or area under investigation. Nevertheless, the concept of “adequate lighting” is relative. Therefore, we have attempted, based on experimental proof of concept (technology readiness level—TRL3), to verify the impact of various types of lighting emitted by LED light sources for scene illumination and their direct influence...
-
A model of the response of the MGS-6 gravity sensor to tilting
PublicationThe reliable interpretation of the measurements made by the Micro-g marine gravimetric system (MGS-6) depends on how the temporary changes of the scale coefficients such as gravimeter scale factor, vertical cross-coupling (VCC) effect, tiltmeter cross and tiltmeter long are compensated for during the signal analysis. The listed coefficients cannot be determined from readings during the measurements or by analysing the final data....
-
Remote Sensing Methods In the Study of the Impact of Long-Term Process of Sulphur Mining on Environmental Changes of the Carpathian Foreland
PublicationThe paper presents research on the extent of impact of sulphur mining process and post-mining activities upon properties of selected elements of the environment, as well as the assessment of the influence of indirect effects resulting from many years' process of exploitation of sulphur deposits in the areas of the Carpathian Foreland (south-east Poland). Within the scope of research conducted, the assessment of the extent of...
-
Assessing historical church tower asymmetry using point cloud spatial expansion
Publication -
The Symmetry of GPS Orbit Ascending Nodes
Publication -
Assessing historical church tower asymmetry using point cloud spatial expansion
PublicationChurch towers are key cultural heritage. In theory, towers are vertical, while facade elements are symmetrically positioned around the tower axis. However, during service of a structure, building and lifetime conditions cause deviations, with associated risks. Laser scanning point clouds can be used to assess the structural state but a universal approach was missing. The proposed algorithm first estimates the tower inclination,...
-
Application of multi-criteria method to assess the usefulness of a hydrotechnical object for floating housing
PublicationThis publication presents the analysis of three hydrotechnical objects located in the Municipality of Gdańsk with a view of mooring Floating Houses. The assessment of the adaptation of a hydrotechnical object has been carried out by a multi- criteria method AHP and using the main criteria such as: mooring system, communication with the mainland, availability of the utility networks, waste disposal and location of the parking spaces....
-
DETERMINATION OF VERTICAL DISPLACEMENTS IN RELATIVE MONITORING NETWORKS
PublicationThe problem of determining displacements of objects is an important and current issue, in particular in terms of operational safety. This is a requirement that covers geodetic, periodic control measurements in order to determine horizontal and vertical displacements. The paper is focused on the analysis of vertical displacements. Geodetic measurements and their interpretation allow to reduce the risk of possible structural catastrophes....
-
A New Geodetic Method of Examination of Geometrical Conditions of a Crane Bridge
PublicationSafety is one of the key aspects related to crane-based material transport. In order to ensure safe crane operation and material transport, it is necessary to meet certain geometrical conditions. The authors addressed the geometrical conditions of a crane bridge, a substantial crane component. The paper presents the method to compute displacement components of points on the top of a bridge crane relative to their design position....
-
Emotion Recognition - the need for a complete analysis of the phenomenon of expression formation
PublicationThis article shows how complex emotions are. This has been proven by the analysis of the changes that occur on the face. The authors present the problem of image analysis for the purpose of identifying emotions. In addition, they point out the importance of recording the phenomenon of the development of emotions on the human face with the use of high-speed cameras, which allows the detection of micro expression. The work that was...
-
Hydrographic Multisensory Unmanned Watercraft
PublicationThis article describes the design of the unmanned surface vessel (USV) and the algorithms for planning the trajectories to be followed on measurement missions. The algorithms take account of the dynamically varying impacts of external forces (wind and surface current) on the vessel's motion. Feedback loops enable the counteraction of external factors that cause disturbance to the desired trajectory. The sensors installed on the...
-
Modelling of heat and mass transfer through wooden buildings
PublicationThe aim of this review paper is to examine the most recent available studies dealing with theoretical, numerical and experimental aspects related to modelling of heat and mass transfer through wooden buildings. The main thermophysical, mechanical and hygrometric properties of wood are firstly discussed. Then, the basic governing equations of heat and mass transfer phenomena are presented. A detailed description of the physical...
-
Has EGNOS its own place in maritime navigation?
PublicationGNSS (in fact it usually means GPS) is at the moment the fundamental means of positioning for any variants of navigation. However some attributes of it can be not sufficient for every users or in some tasks, so there are any cases when this system needs support. From the mariner point of view pure GPS properties perfectly fulfils expectations of sailors at the open sea, however there are lot of cases, when accuracy of the system...
-
Study of displacements of a bridge abutment using FEM
PublicationSteel sheet piles are often used to support excavations for bridge foundations. When they are left in place in the permanent works, they have the potential to increase foundation bearing capacity and reduce displacements; but their presence is not usually taken into account in foundation design. In this article, the results of finite element analysis of a typical abutment foundation, with and without cover of sheet piles, are presented...
-
APPLYING RANSAC ALGORITHM FOR FITTING SCANNING STRIPS FROM AIRBORNE LASER SCANNING
PublicationDuring the development of the data acquired by airborne laser scanning the important issue is the fitting and georeferencing of ALS point clouds by means of the tie surfaces and the reference planes. The process of scanning strips adjustment is based on mutual integration of point clouds (scanning strips) and their adaptation to the reference planes.In simultaneous adjustment all strips are combined into one geometrically coherent...
-
Przegląd budowy i funkcjonalności współczesnych bezzałogowych statków powietrznych
PublicationFotogrametria z lotniczych platform bezzałogowych rozumiana jako nowe narzędzie do wykonywania pomiarów łączy możliwości wykonywania pomiarów fotogrametrycznych naziemnych, lotniczych, a nawet suborbitalnych, stanowiąc jednocześnie niskobudżetową konkurencję dla klasycznej fotogrametrii lotniczej czy teledetekcji satelitarnej. W pracy przedstawiono podstawy budowy bezzałogowego statku powietrznego przeznaczonego do lotów fotogrametrycznych...
-
Przegląd budowy i funkcjonalności współczesnych bezzałogowych statków powietrznych do celów fotogrametrycznych
PublicationFotogrametria z lotniczych platform bezzałogowych rozumiana jako nowe narzędzie do wykonywania pomiarów łączy możliwości wykonywania pomiarów fotogrametrycznych naziemnych, lotniczych, a nawet suborbitalnych, stanowiąc jednocześnie niskobudżetową konkurencję dla klasycznej fotogrametrii lotniczej czy teledetekcji satelitarnej. W pracy przedstawiono podstawy budowy bezzałogowego statku powietrznego przeznaczonego do lotów fotogrametrycznych...
-
Determination of vertical displacements by using the hydrostatic levelling systems with the variable location of the reference sensor,
PublicationAbstract: In this paper, the author proposed a new method for determination of vertical displacements with the use of hydrostatic levelling systems. The traditional method of hydrostatic levelling uses a rule in which a position of reference sensor is stable. This assumption was not adapted in the proposed method. Regarding the issue mentioned above, the reference sensor is treated in the same way as the others sensors that measure...
-
Framework for extracting rails and setting-out railway line axis based on UAV photogrammetric measurements
PublicationTechnical diagnostics enables assessing the current technical condition of a railway line and adjacent infrastructure, and forecasting its changes over a specific time horizon. One of its elements is the periodic monitoring of rail position and their geometry. This article presents a new framework for the setting-out of a railway track axis. The process presented in the manuscript is based on the specific filtration and extraction...
-
Spatial Modelling in Environmental Analysis and Civil Engineering
PublicationAs can be seen, Spatial Modelling in Environmental Analysis and Civil Engineering applies to a multitude of applications. In an attempt to bring the topic closer to potential readers, the special issue referred to security methods, optimization of calculations, conducting measurements and empirical tests. Each article has made an original contribution to the development of practical science that can be replicated by researchers...
-
A New Adaptive Method for the Extraction of Steel Design Structures from an Integrated Point Cloud
PublicationThe continuous and intensive development of measurement technologies for reality modelling with appropriate data processing algorithms is currently being observed. The most popular methods include remote sensing techniques based on reflected-light digital cameras, and on active methods in which the device emits a beam. This research paper presents the process of data integration from terrestrial laser scanning (TLS) and image data...
-
Standard deviation as the optimization criterion in the OptD method and its influence on the generated DTM
PublicationReduction of the measurement dataset is one of the current issues related to constantly developing technologies that provide large datasets, eg. laser scanning. It could seems that presence and evolution of processors computer, increase of hard drive capacity etc. is the solution for development of such large datasets. And in fact it is, however, the “lighter” datasets are easier to work with. Additionally, reduced datasets can...
-
Framework for extracting rails and setting-out railway line axis based on UAV photogrammetric measurements
Publication -
Methodology for Performing Bathymetric Measurements of Shallow Waterbodies Using an UAV, and their Processing Based on the SVR Algorithm
PublicationState-of-art methods of bathymetric measurements for shallow waterbodies use Global Navigation Satellite System (GNSS) receiver, bathymetric Light Detection and Ranging (LiDAR) sensor or satellite imagery. Currently, photogrammetric methods with the application of Unmanned Aerial Vehicles (UAV) are gathering great importance. This publication aims to present step-by-step methodology for carrying out the bathymetric measurements...
-
Methodology for Performing Bathymetric Measurements of Shallow Waterbodies Using an UAV, and their Processing Based on the SVR Algorithm
PublicationState-of-art methods of bathymetric measurements for shallow waterbodies use Global Navigation Satellite System (GNSS) receiver, bathymetric Light Detection and Ranging (LiDAR) sensor or satellite imagery. Currently, photogrammetric methods with the application of Unmanned Aerial Vehicles (UAV) are gathering great importance. This publication aims to present step-by-step methodology for carrying out the bathymetric measurements...
-
Spatio-Temporal Validation of GNSS-Derived Global Ionosphere Maps Using 16 Years of Jason Satellites Observations
PublicationExisting ionospheric models perform very well in mapping the calm state of the ionosphere. However, the problem is accurately determining the total electron content (TEC) for disturbed days. Knowledge of the exact electron density is essential for single−frequency receivers, which cannot eliminate the ionospheric delay. This study aims to investigate temporal and spatial variability in the distribution of TEC based on differences...
-
Analysis of free‐air anomalies on the seaway of the Gulf of Gdańsk. A case study
PublicationIn this paper, we present an attempt to determine the accuracy of shipborne gravimetry for the needs of geoid determination. The shipborne gravity campaign, described in this article, is the beginning of a series of gravimetry measurements in the Polish Exclusive Economy Zone. The campaign was conducted in the area where the accuracy of geoid determination is crucial for the safety of navigation on numerous intersecting ships routes....
-
The method of analysis of damage reinforced concrete beams using terrestial laser scanning
PublicationThe authors present an analysis of the possibility to assess deformations and mechanisms of destructing bent reinforced concrete beams using the terrestrial laser scanning. As part of the experiments carried out at the Regional Laboratory of Construction of the Concrete Structures Division of the Civil and Environmental Engineering Faculty at Gdansk University of Technology, the reinforced concrete beams were subjected to destruction...
-
MULTI-OBJECTIVE OPTIMIZATION PROBLEM IN THE OptD-MULTI METHOD
PublicationNew measurement technologies, e.g. Light Detection And Ranging (LiDAR), generate very large datasets. In many cases, it is reasonable to reduce the number of measuring points, but in such a way that the datasets after reduction satisfy specific optimization criteria. For this purpose the Optimum Dataset (OptD) method proposed in [1] and [2] can be applied. The OptD method with the use of several optimization criteria is called...
-
COMPARATIVE ANALYSIS OF POINT CLOUDS OBTAINED BY TLS AND PHOTOGRAMMETRY
PublicationTechnical progress in the field of 3D modelling resulted in increasing use of such technics to create a virtual 3D models of objects. Three-dimensional spatial models are used in a wide range of applications such as inventorisation of architectural-construction, an inventorisation of archaeological sites, medicine and wide-known engineering. Spatial models are created based on the point clouds acquired with laser scanners or photogrammetry....
-
Determination of rectification corrections for semi gantry crane rail axes in the local 3D coordinate system
PublicationElectronic tacheometers are currently the standard instruments used in geodetic work, including also geodetic engineering measurements. The main advantage connected with this equipment is among others high accuracy of the measurement and thus high accuracy of the final determinations represented for example by the points’ coordinates. One of many applications of the tacheometers is the measurement of crane rail axes. This measurement...
-
THE RESEARCH ON EGNOS SYSTEM IN CONTEXT OF THE ABILITY TO DETERMINE THE SHIP’S HULL SPATIAL ORIENTATION
PublicationThe European Geostationary Navigation Overlay Service (EGNOS) thanks to geostationary satellites covers an area of whole Europe, including Baltic and North Sea. It allows to fix the coordinates of object position with typical absolute accuracy of 1,5 m. Previous research have shown that relative accuracy is usually higher than absolute one [Nowak A., 2010, Nowak A., 2011], so probably it could be possible to use EGNOS to determine...
-
MEASUREMENT AND ANALYSIS OF A FLOOD WAVE PROPAGATION ON THE KACZA RIVER IN GDYNIA IN NORTHERN POLAND
PublicationKacza river is located in northern Poland in the neighborhood of the Gulf of Gdansk and the Baltic Sea. A Kacza having length of 15 km and catchment area of 53 km2 collects the water into the Gulf mostly from inhabited and forested areas within the administrative boundaries of the city of Gdynia. On the 14th and 15th of July 2016 in northern Poland on the large area of Tri-City agglomeration (Gdynia, Gdansk and Sopot) total daily...
-
Digital Photogrammetry in the Analysis of the Ventricles' Shape and Size
PublicationThis article presents spatial analyzes conducted to assess the potential of ReMake software to be used for medical purposes, with emphasis on the analysis of the shape and dimensions of the ventricles. To achieve this goal, the length of the sections measured with the ReMake and Image Master programs have been compared. RMS error was on the level of 1.2 mm. In addition to indicating the appropriateness of using this software, there...
-
SEDIMENT DEPOSITION IN RESERVOIRS IN URBAN BASIN
PublicationIn recent years Gdańsk had sustained economic and social losses due to severe flash floods coming down from moraine hills. The first flood occurred in July 2001 and the second in July 2016. Both events were caused by intense and long rainfall characterized by different from each other rain intensity in time. Among other Gdansk’s streams the Oliwski Stream has the most extended flood protection system consist of 15 small retention...
-
IMAGE CORRELATION AS A TOLL FOR TRACKING FACIAL CHANGES CAUSING BY EXTERNAL STIMULI
PublicationExpressions of the human face bring a lot of information, which are a valuable source in the areas of computer vision, remote sensing and affective computing. For years, by analyzing the movement of the skin and facial muscles scientists are trying to create the perfect tool, based on image analysis, allowing the recognition of emotional states of human beings. To create a reliable algorithm, it is necessary to explore and examine...
-
THE METHOD OF MEASURING THE MEMBRANE COVER GEOMETRY USING LASER SCANNING AND SYNCHRONOUS PHOTOGRAMMETRY
PublicationThe authors present the experience and results of field studies carried out at the technical acceptance of Forest Opera (name in Polish: Opera Leśna) in Sopot (Poland). An unusual design of covering made in the form of “Sheerfill I” technical fabric membrane required spanned in the form of sails, required the use of terrestrial laser scanning. Such approach allowed for the fast and accurate record of the surface of individual panels...
-
THE METHOD OF ANALYSIS OF DAMAGE REINFORCED CONCRETE BEAMS USING TERRESTRIAL LASER SCANNING
PublicationThe authors present an analysis of the possibility to assess deformations and mode of failure of R-C beams using terrestrial laser scanning. As part of experiments carried out at the Regional Laboratory of Construction (at Gdansk University of Technology), reinforced concrete beams were subjected to destruction by bending and by shear. The process of press impact on the reinforced concrete beam was recorded using terrestrial laser...
-
ARTIFICIAL MODEL IN THE ASSESSMENT OF THE ALGORITHM OF OBJECTS RECORDED BY LASER SCANNING SHAPE DETECTION (ALS/TLS)
PublicationBrief description of the study and used methods. Brief description of the study and used As part of the preparatory work aimed to create the application solution allowing for the automation of searching objects in data, obtained in the scanning process using ALS (Airborne Laser Scanning) or TLS (Terrestrial Laser Scanning), the authors prepared a artificial (synthetic, theoretical) model of space, used for the verification of operation...
-
Transformation of the Perpetual Usufruct Right Into the Ownership of a Real Property Estate
PublicationIn addition to the ownership, there is in Poland the so-called perpetual usufruct right, which is an intermediate form between ownership and limited property rights. It allows for long-term use of the land which is not our ownership. Makes it possible to mortgage a property, is transferable and inheritable. The article describes the legal regulations governing the establishment and functioning of the perpetual usufruct, and the...
-
GIS three-dimensional Modelling with geo-informatics techniques
PublicationThe integration issue of virtual models and geo-referenced database have a very broad spectrum of potential applications. Before the integration issue was on the cusp, it was quite problematic to combine three-dimensional models with the geo-referenced database. An integrated database contains a variety of data including such as object orientated data model and raster data. Within this paper, authors present an integration process...
-
State-of-the-art framework for high-speed camera and photogrammetric use in geometry evaluation of prestressed concrete failure process
PublicationPrestressed structures are a key to the realization of the boldest architectural ideas, regardless of shape complexity, great height and large span. A characteristic feature of the prestressed structure is the better use of concrete material properties by insertion of internal forces. The internal forces are opposed to external loads effects (forces and deformations of structure). Prestressed reinforced concrete beams are characterized...
-
Accuracy improvement of the prestressed concrete structures precise geometry assessment by use of bubble micro-sampling algorithm
PublicationPrestressed concrete structures are well-known technology for a vast period, but nevertheless, this very technology is a leading solution, currently used in construction industry. Prestressed concrete structures have a huge advantage over conventional methods because it uses the properties of concrete in a very efficient way. The main idea behind this technology is to introduce into the cross-section of the structure, the internal...
-
3D Monitoring - Identification of measurement problems at larger movements of the tracked points
PublicationAuthors identified the problems associated with the determination of the controlled points coordinates by use of automated Total Station placed behind transparent barrier. Important thing in the mentioned analysis was a large change of controlled points position and not stable Total Station’s stand (because of stand’s thermal drift). This two elements, combined with measurement made through glass plate determine the need for impact...
-
Biomass estimation using a length-weight relationship in beetle larvae (Coleoptera: Aphodiidae, Histeridae, Hydrophilidae, Staphylinidae) obtained from cow dung
PublicationThis research enabled the relationship between length and dry body mass to be determined for 158 beetle larvaetaken from cow dung in north-eastern Poland. The larvae were divided into three morphological types, for which the power and linear function of the body length-weight relationship were determined. The linear regression equation characterizes the relationship between body weight and...
-
Analiza możliwości rozwoju Mieszkalnych Obiektów Pływających (MOP) w aspekcie czynników środowiskowych
PublicationW publikacji przestawiono wyniki badań dotyczących możliwości rozwoju Mieszkalnych Obiektów Pływających (MOP), popularnie nazywanych Domami Na Wodzie (DNW) z uwzględnieniem wpływu czynników środowiskowych. Badanie potencjalnych kierunków rozwoju MOP w aspekcie czynników środowiskowych przeprowadzone zostało z zastosowaniem metody Scenariuszy Stanów Otoczenia dla scenariusza optymistycznego, pesymistycznego i najbardziej prawdopodobnego....
-
Simulations of the Derecho Event in Poland of 11th August 2017 Using WRF Model
PublicationThis series contains datasets related to the forecasting of a severe weather event, a derecho, in Poland on 11 August 2017. The simulations were conducted using the Weather Research and Forecasting (WRF) model version 4.2.1 with different initial and boundary conditions of the pressure and model levels derived from 5 global models: Global Forecast System (GFS), Global Data Assimilation System (GDAS), European Centre for Medium-Range...
-
Long-Term GNSS Tropospheric Parameters for the Tropics (2001-2018) Derived from Selected IGS Stations
PublicationThis paper describes dataset “Tropospheric parameters derived from selected IGS stations in the tropics for the years 2001-2018” contains GNSS-derived zenith tropospheric delay (ZTD), a posteriori corrected zenith wet delay (ZWD), and precipitable water vapour (PWV) time series. These troposphere-related data were estimated for the Jan 2001 – Dec 2018 period for 43 International GNSS Service (IGS) stations located across the global...
-
Geodezyjne wyznaczanie przemieszczeń pionowych obiektów inżynierskich z pomiarów uzyskanych metodą niwelacji hydrostatycznej
PublicationNiwelacja hydrostatyczna (NH) jest obecnie często stosowaną metodą wyznaczenia przemieszczeń pionowych obiektów inżynierskich takich jak: mosty, wiadukty, estakady, tunele, wysokie budynki, obiekty zabytkowe, specjalistyczne obiekty inżynierskie (np. synchrotron), hale sportowe, widowiskowe, itp. Zastosowane w systemach niwelacji hydrostatycznej (SNH) sensory (czujniki) pomiarowe obejmują sensor referencyjny (RS) oraz czujniki...
-
Assessment of Adjustment of GNSS Railway Measurements with Parameter-Binding Conditions in a Stationary Scenario
PublicationThe study aims to assess the applicability of the ordinary least squares method, robust estimation, and conditions-binded adjustment in processing the six synchronous coordinate pairs of global navigation satellite system (GNSS) receivers. The research is part of the research project InnoSatTrack, focused on the enhancement of the determination of geometrical parameters of railway tracks using GNSS, inertial, and other sensors....
-
Modelowanie 3D zabytkowego obiektu sakralnego za pomocą stacjonarnego skaningu laserowego na podstawie analizy światła naturalnego
PublicationTechnologia skanowania laserowego jest powszechnie stosowana w inwentaryzacji obiektów kultury. Ciągły wzrost technologiczny pozwala na wykorzystanie złożonych modeli cyfrowych 3D przez coraz większą liczbę odbiorców. Jedną z odmian zastosowania modeli jest tzw. HBIM (HistoricalBIM/ HeritageBIM). W artykule skupiliśmy się na pierwszym z etapów zarządzania takim projektem, jak inwentaryzacja. Celem pracy jest określenie przydatności...
-
City scan as a tool to assess resilience challenges and vulnerabilities at the community level
PublicationThe majority of the world’s population lives in cities and cities are the key to achieving resilience. Local governments own only part of the land and can only partially decide about measures that should be taken ‘on the ground’. Local governments are therefore highly dependent on individuals, communities, and businesses to adapt and transform and take action in their own backyards or neighbourhoods. Since, for many people, climate...
-
Testing of the longest span soil-steel bridge in Europe – new quality in measurements
PublicationThe article describes interdisciplinary and comprehensive diagnostic tests of final bridge inspection and acceptance proposed for a soil – steel bridge made of corrugated sheets, being the European span length record holder (25.74 m). As an effect of an original concept a detailed and precise information about the structure response was collected. The load test design was based on the nonlinear numerical simulations performed by...
-
Evaluation of the Possibility of Identifying a Complex Polygonal Tram Track Layout Using Multiple Satellite Measurements
PublicationWe present the main assumptions about the algorithmization of the analysis of measurement data recorded in mobile satellite measurements. The research team from the Gda´nsk University of Technology and the Maritime University in Gdynia, as part of a research project conducted in cooperation with PKP PLK (Polish Railway Infrastructure Manager), developed algorithms supporting the identification and assessment of track axis layout....
-
KAMIŃSKI W.: Modelowanie przemieszczeń pionowych mieszaną, ortogonalną metodą najmniejszych kwadratów (Mixed Total Least Squares)
PublicationProblematyka modelowania przemieszczeń pionowych standardową metodą najmniejszych kwadratów i mieszaną ortogonalną metodą najmniejszych kwadratów. Przykłady praktycznych obliczeń na rzeczywistych i symulowanych wynikach obserwacji.
-
Zdalne rozpoznawanie twarzy w poprawie bezpieczeństwa osobistego interweniującego funkcjonariusza Policji
PublicationStreszczenie: W 2017 r. ruszył w Polsce pilotażowy program zakładania kamer cyfrowych na mundurach policyjnych. Z perspektywy dnia dzisiejszego wiadomo, że kamery będące indywidualnym wyposażeniem policjanta, rejestrując czas, datę i przebieg interwencji, niejednokrotnie stanowią istotny dowód w sprawach spornych, zwłaszcza w sytuacjach pomawiania policjantów o przekroczenie uprawnień podczas interwencji. W dobie nieustannie...
-
Enviromental factors az the elements determingthe development of floating homes
PublicationThe popularity of Floating Homes in Western Europe and North America is noticeable. The interest in thesefacilities in Poland is also constantly growing. The popularity of Floating Homes is due to climate change, risingland prices and population density in city centers. However, environmental factors play a significant role in theirdevelopment. The publication presents the results of research on the impact of environmental factors...
-
Determination of the tram track axis using a multi receiver GNSS measurement system
PublicationThis article refers to research, that has been conducted by an interdisciplinary research team from the Gdańsk University of Technology and the Maritime University in Gdynia since 2009. These investigation concerns the determination of a railway track axis using the mobile satellite measurement technique. Following the dynamic development of GNSS techniques, that could be seen in the last decade, the team carried out further experiments...
-
Weryfikacja założeń do badań sonarowych oraz pomiary testowe w basenie portowym
Publication.
-
Metoda OptD do redukcji danych w opracowaniu wyników pomiarów linii elektroenergetycznych
PublicationSkaning laserowy to technologia dostarczająca we względnie krótkim czasie dużą ilość danych pomiarowych. Jest to zarazem pozytywna jak i negatywna cecha tej technologii. Z jednej strony w wyniku skaningu otrzymuje się dane, które szczegółowo odzwierciedlają pomierzony obiekt. Z drugiej strony trudność sprawia przetwarzanie takiej ilości danych i nie zawsze wszystkie dane ze skaningu są niezbędne do realizacji wybranego zadania....
-
Pomiary geodezyjne pionowości budowli wysmukłych : kominów
PublicationW pracy przedstawiono charakterystykę i zakres prac wykonywanych w trakcie pomiarów budowli wysmukłych. Omówiono stosowane metody wraz ze wskazaniem możliwości ich zastosowania
-
Zastosowanie metod nieniszczących w diagnostyce nawierzchni drogowych w rejonie obiektów mostowych
PublicationW artykule przedstawiono możliwość wykorzystania metod nieniszczących w diagnostyce nawierzchni drogowych jako alternatywę do metod tradycyjnych w celu wyjaśnienia przyczyn powstawania zarysowań poprzecznych nawierzchni w sąsiedztwie obiektów mostowych. Wykorzystano dwie metody skanowania: laserowe w celu szczegółowej inwentaryzacji powierzchni nawierzchni oraz georadarowe (GPR) w celu inwentaryzacji struktury nawierzchni. W wyniku...
-
Wpływ temperatury na pomiary geodezyjne oraz odkształcenia wybranych budowli
PublicationW rozdziale omówiono wpływ temperatury na wyniki pomiarów geodezyjnych różnych budowli inżynierskich
-
Pomiary elektrowni wiatrowych
PublicationW monografii zaprezentowano metodologię pomiaru konstrukcji elektrowni wiatrowej. Zaproponowano i omówiono metodę obserwacji przemieszczeń konstrukcji elektrowni w trakcie jej pracy i przestoi.
-
Badanie wychylenia budowli wieżowych
PublicationW rozdziale przedstawiono wyniki pomiarów wychylenia wieży zamku w Kwidzynie
-
Prognoza przestrzennej deformacji kompleksu hal przemysłowych z wykorzystaniem geodezyjnych obserwacji przemieszczeń
Publication.
-
Ekspertyza techniczna określająca przyczyny wystąpienia zarysowań w strefach dylatacji na ekranach zapory czołowej i bocznej zbiornika wodnego Nysa na rzece Nysa Kłodzka
PublicationCelem ekspertyzy technicznej jest określenie przyczyn wystąpienia zarysowań i pęknięć przy dylatacjach płyt żelbetowych, tworzących ekran zapory czołowej i bocznej zbiornika wodnego Nysa oraz prezentacja koncepcji naprawy.
-
Opinia biegłego ad hoc dla Sądu Okręgowego w Gdańsku, Wydział Gospodarczy
PublicationDotyczy awarii konstrukcji hydrotechnicznej.
-
Study of the Flow Dynamics of Surface Water Masses in the Area of the Coastal Gulf of Gdansk
PublicationThe paper describes two methods of predicting the movement of small objects with surface water masses. One of the methods uses graph theory to describe the motion of water masses in port docks. The results of this study were compared to a simulation using the hydrodynamic numerical model M3D. The results obtained in a virtual environment were related to the experiments in the real world. In the coastal area of the Gulf of Gdansk,...
-
Wykonanie pomiarów wraz z opracowaniem opinii naukowo-technicznej dotyczącej geometrii rotundy palmiarni wykonanej w ramach zadania: Rewitalizacja i przebudowa kompleksu budynku palmiarni w ogrodzie botanicznym w Parku Oliwskim im. Adama Mickiewicza w Gdańsku-Oliwie"
PublicationCelem opracowania jest wykonanie skanu laserowego konstrukcji rotundy palmiarni realizowanej w ramach zadania „Rewitalizacja i przebudowa kompleksu budynku palmiarni w ogrodzie botanicznym w Parku Oliwskim im. Adama Mickiewicza w Gdańsku Oliwie”, ocena zgodności geometrii konstrukcji z dokumentacją projektową oraz wydanie opinii nt dalszego postępowania z konstrukcją. Zakres opracowania obejmuje: 1) analizę dokumentacji obiektu; 2)...
-
Wykonanie skanowania terenu przy Urzędzie Wojewódzkim w Gdańsku wraz z opracowaniem raportu dla kontraktu: "Budowa wiaduktu Biskupia Górka w Gdańsku"
PublicationCelem opracowania jest wykonanie skanu obszaru w rejonie przyszłej inwestycji pn. "Wiadukt Góra Biskupia w Gdańsku" w poszukiwaniu możliwie występujących pod poziomem terenu zabytkowych zabudowań. W zakresie opracowania wykonano pomiary z użyciem metody georadarowej (GPR), badań elektrooporowych (ERT) oraz metody grawimetrycznej.
-
Opracowanie wyników pomiaru osiadania i odchylenia od pionu słupów stalowych kompleksu hal "Mostostalu Gdańsk S.A." przy ul. Marynarki Polskiej 96 w gdańsku
PublicationOkresowe geodezyjne pomiary osiadania i wychylenia słupów stalowych w kompleksie hal przemysłowych.