Filters
total: 201
filtered: 89
Search results for: BIM
-
Education Towards The Use Of BIM On The Example Of Polish Universities
PublicationBIM (Building Information Modeling) has been one of the rapidly developing fields of digital techniques supporting the realization of construction projects in recent years. Further development, and especially the use of these techniques, depends to a large extent on the qualifications of young construction engineers who start their professional careers in this field. The article attempts to synthetically list and compare subjects,...
-
Modeling BIM Objects From Point Clouds. Examples
PublicationThe article presents several ways to obtain BIM (Building Information Modeling) models from point clouds using standard commands in Revit 2018. In Revit geometric forms are possible to obtain in project, family or conceptual environments. Efficient modeling requires knowledge of methods of creating families and components in these environments and ways to combine them. Modeling methods with system and loadable families are presented,...
-
Aktualny stan wdrożenia BIM w polskich firmach budowlanych
PublicationCelem artykułu jest określenie zakresu zastosowania technologii BIM przez inżynierów budownictwa. Wykorzystując badania ankietowe, zidentyfikowaliśmy m.in. zasadnicze bariery związane z wdrożeniem BIM. Przeprowadzone badanie potwierdziło, że stopień aplikacji technologii BIM w polskich firmach budowlanych nadal nie jest satysfakcjonujący, a jej tempo rozwoju w znacznej mierze zależy od wymagań, jakie stawiają zamawiający publiczni...
-
Computer-Aided Automated Greenery Design—Towards a Green BIM
PublicationContemporary climate challenges are changing the architect’s awareness, which results in a broader spectrum of interest. The available software enables the design of vegetation, but it is often very limited and requires specialist knowledge. The available software allows the creation of individual solutions based on visual algorithms or writing scripts; however, they are still not common methods used in architecture and urban planning....
-
BIM jako narzędzie wspomagające zarządzanie ryzykiem przedsięwzięcia inwestycyjnego
PublicationW artykule prezentuje się przykłady dużych rozbieżności w kalkulacji kosztu inwestycji przez zamawiającego i oferentów oraz zasadnicze przyczyny najczęściej występującego w praktyce ryzyka przekroczenia parametrów przedsięwzięcia inwestycyjnego. Wskazano możliwości wyeliminowania tak znacznych różnic dzięki zastosowaniu technologii BIM oraz stosowaniu jednakowych i spójnych danych przez wszystkich uczestników przedsięwzięcia inwestycyjnego....
-
Bariery i ograniczenia wdrażania technologii BIM- wyniki badań pilotażowych
Publication.
-
Technologie komputerowego wspomagania projektowania BIM w procesie kształcenia inżyniera branży sanitarnej
PublicationRozwiązanie, którego początków należy szukać pod koniec lat 80, a które na przełomie XX i XXI wieku zostało nazwane BIM-em, będące innowacyjną technologią parametrycznego modelowania informacji o budynku (z ang. Building Information Modeling), jest do dzisiaj intensywnie rozwijane we wszystkich etapach projektowania inżynierskiego. Uczelnie techniczne, chcąc dostosować program kształcenia współczesnego inżyniera branży sanitarnej...
-
PRESERVATION THROUGH DIGITIZATION - STANDARDIZATION IN DOCUMENTATION OF BUILD CULTURAL HERITAGE USING CAPTURING REALITY TECHNIQUES AND HERITAGE/HISTORIC BIM METHODOLOGY
Publication -
Wpływ parametrów asymetrycznego walcowania na krzywiznę walcowanej blachy bimetalowej = The influence of parameters of assymetric rolling on the curvature of bimmetal plate
PublicationWyginanie się bimetalowych blach grubych po wyjściu z kotliny walcowniczej jest zjawiskiem utrudniającym bezawaryjne prowadzenie procesu technologicznego. Na podstawie licznych prac [1¸4] można stwierdzić, że zastosowanie walcowania asymetrycznego jest jedną z metod pozwalających na wyeliminowanie niekorzystnego wpływu wyginania się dwuwarstwowej blachy po procesie walcowania. Do badań numerycznych asymetrycznego procesu walcowania...
-
Modelowanie asymetrycznego procesu walcowania blach bimetalowych = The modeling of asymetrical rolling process of bimetallic plate
PublicationW pracy rozważano problem płynięcia plastycznego bimetalowego pasma podczas asymetrycznego procesu walcowania blach bimetalowych. Asymetrię procesu uzyskano w wyniku wprowadzenia różnic w wartościach sił tarcia na powierzchniach styku pasma z poszczególnymi walcami.
-
Numeryczne modelowanie prędkości płynięcia warstw blachy bimetalowej w procesie walcowania = The numerical modelling of the layers flow velocity in bimetal plates rolling proces
PublicationW pracy przedstawiono wyniki obliczeń numerycznych dotyczących procesu asymetrycznego walcowania blach bimetalowych 18G2A+1H13.
-
Obiektywizacja bimodalnego procesu percepcji wzrokowo-słuchowej
PublicationJednoczesny odbiór bodźców słuchowych i wzrokowych często prowadzi do ukrycia lub przekłamania informacji zawartych w tych bodźcach. W literaturze efekt ten nazywany jest wpływem ściągającym obrazu na percepcję dźwięku. Do niedawna większość badań związanych ze zrozumieniem natury tego zjawiska opierała się na subiektywnych ocenach osób badanych. W referacie zaproponowano metodologię obiektywizacji wyników badań opartą na technologii...
-
Docieranie jednostronne płaskich elementów bimetalowych.
PublicationPrzedstawiono ogólne problemy technologiczne wytwarzania płaskich elementów bimetalowych. Omówiono wyniki eksperymentów docierania części brązowej na docierarce jednotarczowej o standardowym układzie kinematycznym. Określono ubytek wagowy oraz chropowatość i nośność powierzchni. Wskazano na niebezpieczeństwo występującego skażenia powierzchni brązu mikroziarnami ściernymi po docieraniu, co ma duże znaczenie eksploatacyjne.
-
Zależność stałej rekombinacji bimolekularnej od wybranych parametrów doświadczalnych
PublicationW komunikacie przedstawiono najważniejsze wnioski wynikające z zaproponowanego opisu rekombinacji bimolekularnej w materiałach molekularnych dotyczące wpływu natężenia pola elektrycznego oraz koncentracji nośników ładunku na wartość stałej rekombinacji bimolekularnej.
-
REJESTRACJA, PARAMETRYZACJA I KLASYFIKACJA ALOFONÓW Z WYKORZYSTANIEM BIMODALNOŚCI
PublicationPraca dotyczy rejestracji i parametryzacji alofonów w języku angielskim z wykorzystaniem dwóch modalności. W badaniach dokonano rejestracji wypowiedzi w języku angielskim mówców, których znajomość tego języka odpowiada poziomowi rodowitego mówcy. W kolejnym etapie wyodrębnione zostały alofony z nagrań fonicznych i odpowiadające im sygnały wizyjne. W procesie tworzenia wektorów cech wykorzystano odrębne systemy parametryzacji,...
-
Dependence of bimolecular recombination rate constant on different experimental parameters
PublicationZ otrzymanych wzorów analitycznych oraz przeprowadzonych obliczeń numerycznych wynika, że dla wysokich natężeń pola elektrycznego stała szybkości rekombinacji bimolekularnej jest funkcją zewnętrznego pola elektrycznego oraz koncentracji nośników ładunku. Szczególnie interesujący jest wynik dotyczący obniżania się stałej szybkości rekombinacji wraz ze wzrostem natężenia pola elektrycznego, który różni się zupełnie od przewidywań...
-
Analiza procesu asymetrycznego walcowania blachy bimetalowej Al-Cu
PublicationW pracy określono wpływ asymetrii prędkości obwodowej walców na wygięcie blachy bimetalowej Al-Cu. Wprowadzenie asymetrycznego procesu walcowania do wytwarzania blach bimetalowych ma na celu zwiększenie prędkości płynięcia warstwy o większym oporze odkształcenia oraz zwiększenie równomierności rozkładu odkształcenia całkowitego na warstwy pasma. Ponadto w pracy określono optymalne wartości współczynnika asymetrii av, dla których...
-
Bimodal Emotion Recognition Based on Vocal and Facial Features
PublicationEmotion recognition is a crucial aspect of human communication, with applications in fields such as psychology, education, and healthcare. Identifying emotions accurately is challenging, as people use a variety of signals to express and perceive emotions. In this study, we address the problem of multimodal emotion recognition using both audio and video signals, to develop a robust and reliable system that can recognize emotions...
-
Photoelectrochemical properties of BIMEVOX (ME=Cu, Zn, Mn) electrodes in contact with aqueous electrolyte
PublicationLayered oxide Bi4O2O11 and mixed oxides of bismuth, vanadium and a third metal (ME = Cu, Zn, Mn) were synthesized and characterized using XRD, Raman and SEM. The energy band gap (Eg) of samples determined using UV–VIS reflectance spectra equals to 2.46, 2.34, 2.27 and 2.18 eV for Bi4V2O11, BICUVOX (Bi2V1 − xCuxO5.5 − 3x/2), BIZNVOX (Bi2V1 − xZnxO5.5 − 3x/2) and BIMNVOX (Bi2V1 − xMnxO5.5 − x/2) (x = 0.1), respectively. Open circuit...
-
Bimolecular excited species in optical emission from organic electroluminescent devices
PublicationW pracy dokonano przeglądu dwu-molekularnych stanów wzbudzonych emitujących światło (ekscymery, ekscypleksy, elektromery, elektropleksy) w organicznych diodach EL
-
Dependence of the charge carries photogeneration yield on the bimolecular recombination in tetracene layers
PublicationBadano mechanizmy generacji nośników ładunku dwóch znaków w warstwie tetracenu. Rezultaty pomiarów doświadczalnych oraz prowadzona analiza wykazały, że rekombinacja wpływa znacząco na produkcję nośników ujemnych.
-
Analiza docierania elementów bimetalowych docierakami żeliwnymi i ścierno-metalowymi.
PublicationPrzedstawiono wyniki badań jednotarczowego docierania powierzchni płaskich elementów bimetalowych. W badaniach stosowano docieraki żeliwne i niekonwencjonalne narzędzia ścierno-metalowe. Docieraki te charakteryzują się tym, iż w metalowym korpusie rozmieszczone są równomiernie tabletki ścierne.
-
Dielectric and electro-optic studies of a bimesogenic liquid crystal composed of bent-core and calamitic units
Publication -
Wytwarzanie blach bimetalowych al 99,98 -m1e wstępnie łączonych metodą zgrzewania wybuchowego
PublicationW artykule omówiono proces wytwarzania blach bimetalowych AL99,8-M1E obejmujący etap łączenia warstw stanowiących wsad bimetalowy oraz etap związany z ich plastycznym kształtowaniem poprzez walcowanie. Przedstawiono i omówiono wpływ parametrów procesu walcowania na nierównomierność odkształcenia warstw stanowiących bimetal.
-
Wpływ technologii sporządzania mieszanin poliamidu 6 z bimodalnym polietylenem na ich wybrane właściwości mechaniczne.
PublicationPrzedstawiono wyniki badań DMTA poliamidu 6 (PA6) bimodalnego polietylenu(b-PE).
-
Two-Dimensional Molybdenum Diselenide Tuned by Bimetal Co/Ni Nanoparticles for Oxygen Evolution Reaction
Publication -
BADANIA ZŁĄCZY SPAWANYCH BIMETALU ZGRZEWANEGO WYBUCHOWO STALI NIESTOPOWEJ SA516 Gr. 60 ZE STOPEM MONEL 400
PublicationW pracy przedstawiono wyniki badań doczołowych złączy spawanych bimetalu typu stal niestopowa SA516 Gr. 60 - monel 400 (SB127 UNS 04400). Badany bimetal został wytworzony poprzez zgrzewanie wybuchowe. Określono własności mechaniczne, rozkład twardości oraz strukturę otrzymanych złączy. Zwrócono uwagę na trudności technologiczne spawania tego rodzaju materiału oraz możliwość generowania niezgodności spawalniczych.
-
Wpływ stężeń typu bimomentowego na siłę krytyczną wyboczenia skrętnego cienkościennych prętów stalowych w podwyższonych temperaturach
PublicationRozważana jest stateczność prętów cienkościennych o przekroju bisymetrycznym otwartym ze stężeniami typu bimomentowego w podwyższonych temperaturach. Wyznaczono pierwszą wariację sił krytycznej wyboczenia skrętnego pręta cienkościennego przy wariacji temperatury przekroju poprzecznego. Analizę oparto na klasycznej teorii prętów cienkościennych. Zmiany właściwości stali w zależności od temperatury przyjęto zgodnie z normą PN-90/B-03200....
-
Progress, Challenge, and Perspective of Bimetallic TiO2-Based Photocatalysts
PublicationBimetallic TiO2-based photocatalysts have attracted considerable attention in recent years as a class of highly active catalysts and photocatalysts under both UV and Vis light irradiation. Bimetallic noble metal structures deposited on TiO2 possess the ability to absorb visible light, in a wide wavelength range (broad LSPR peak), and therefore reveal the highest level of activity as a result of utilization of a large amount of...
-
Bimodal classification of English allophones employing acoustic speech signal and facial motion capture
PublicationA method for automatic transcription of English speech into International Phonetic Alphabet (IPA) system is developed and studied. The principal objective of the study is to evaluate to what extent the visual data related to lip reading can enhance recognition accuracy of the transcription of English consonantal and vocalic allophones. To this end, motion capture markers were placed on the faces of seven speakers to obtain lip...
-
Teoretyczna analiza wpływu kierunku fali detonacyjne na krzywiznę bimetalowego pasma Al-Cu w asymetrycznym procesie walcowania.
PublicationPrzedstawiono wpływ kierunku rozchodzenia się fali detonacji na wartość naprężeń uplastyczniających materiałów tworzących blachę bimetalową Al-Cu. Przy użyciu programu FORGE-2D analizowano wpływ walcowania asymetrycznego na krzywiznę walcowanego pasma.
-
Preparation, characterization and photocatalytic activity of TiO2 microspheres decorated by bimetallic nanoparticles
PublicationComposite photocatalysts that consist of TiO2and noble metal nanostructures have been considered tobe the promising and pivotal material for accessible enhancement of the efficiency in the photocatalyticprocess carried out in the aqueous and gas phases. In this work we fabricated porous TiO2microspheresthrough a hydrothermal process followed by photochemical reduction of noble metal nanoparticles atthe TiO2surface. The morphology...
-
Badanie właściwości fotokatalitycznych, biobójczych i magnetycznych tlenku tytanu(IV) modyfikowanego nanocząstkami monoi bimetalicznymi Pt, Ag, Cu, Au oraz Pd
PublicationZakres badań obejmował otrzymywanie i charakterystykę nanokompozytów tlenku tytanu(IV) modyfikowanego mono- oraz bimetalicznymi nanocząstkami metali platyny, palladu, złota, srebra oraz miedzi. Zbadano wpływ zawartości metali, matrycy TiO2 oraz połączeniami metali na właściwości fotokatalityczne, biobójcze i magnetyczne otrzymanych nanokompozytów TiO2. Aktywność fotokatalityczną zbadano w reakcji degradacji modelowych związków oraz...
-
Bedload transport and temporal variation of non-uniform sediment in a seepage-affected alluvial channel
Publication -
Characterization of TiO2 Modified with Bimetallic Ag/Au Nanoparticles Obtained in Microemulsion System
PublicationFotokatalizatory TiO2 modyfikowane nanocząstkami bimetalicznymi Ag/Au przygotowano metodą mikroemulsyjną w układzie woda/surfaktant/cykloheksan. Aktywność fotokatalityczna próbek Ag/Au-TiO2 oszacowano przez wyznaczenie stopnia degradacji fenolu pod wpływem światła VIS. Fenol został użyty jako model zanieczyszczeń, ponieważ jest substancją niebezpieczną dla środowiska. Najwyższą aktywność w zakresie światła widzialnego wykazała...
-
Resonance-Raman spectro-electrochemistry of intermediates in molecular artificial photosynthesis of bimetallic complexes
PublicationThe sequential order of photoinduced charge transfer processes and accompanying structure changes were analyzed by UV-vis and resonance-Raman spectroscopy of intermediates of a Ru(II) based photocatalytic hydrogen evolving system obtained by electrochemical reduction.
-
Temperature-controlled nanomosaics of AuCu bimetallic structure towards smart light management
PublicationGold–copper nanostructures are promising in solar-driven processes because of their optical, photocatalytic and photoelectrochemical properties, especially those which result from the synergy between the two metals. Increasing interest in their internal structure, such as the composition or distribution of the Au and Cu as well as the size and shape of the nanoparticles, have developed to define their physicochemical properties. In...
-
Transformation of bimetallic Ag–Cu thin films into plasmonically active composite nanostructures
PublicationFormation of plasmonically active silver, copper and composite silver-copper nanostructures were studied in this paper. Metallic nanostructures were fabricated by thermal disintegration, so called dewetting, of the thin films in an argon atmosphere. The formation process of the nanostructures was in-situ observed by a novel method, based on resistance measurements. The influence of the material and thickness of the initial thin...
-
Synthesis of bimetallic Co–Pt/cellulose nanocomposites for catalytic reduction of p-nitrophenol
PublicationIn this study, bimetallic nanoparticles (NPs) of Co–Pt anchored on cellulose nanofibers (CNFs) for catalytic applications were synthesized via a sonochemical approach. The electro-spinning technique was employed for the synthesis of CNFs from cellulose acetate. The thorough characterization of synthesised Co–Pt/CNF nanocomposites was performed with the help of scanning electron microscopy (SEM), Fourier transform infra-red (FT-IR)...
-
Bimodal Nd-Doped LuVO4 Nanoprobes Functionalized with Polyacrilic Acid for X-Ray Computed Tomography and NIR Luminescent Imaging
Publication -
Visible light photoactivity of TiO2loaded with monometallic(Au or Pt) and bimetallic (Au/Pt) nanoparticles
PublicationTiO2modified with monometallic (Au or Pt) and bimetallic (Au/Pt) nanoparticles have been preparedusing a water-in-oil microemulsion system (water/AOT/cyclohexane) followed by calcination step. Theeffect of metal ratio, reducing agent type (NaBH4or N2H4), TiO2matrix type (P-25, ST-01, TiO-5, TiO2nano-tubes or TiO2obtained by TIP hydrolysis) as well as calcination temperature (from 350 to 650◦C) weresystematically investigated. Obtained...
-
Natural Environments for Nanoparticles Synthesis of Metal, Metal Oxides, Core–Shell and Bimetallic Systems
Publication -
Inert gas condensation made bimetallic FeCu nanoparticles - plasmonic response and magnetic ordering
Publication -
Porphyrazines Peripherally Functionalized with Hybrid Ligands as Molecular Scaffolds for Bimetallic Metal-Ion Coordination
Publication -
The Antibacterial and Antifungal Textile Properties Functionalized by Bimetallic Nanoparticles of Ag/Cu with Different Structures
PublicationWe reported a preparation and characterization of five kinds of impregnation solutions, containing Ag/Cu in the formof bimetallic nanoparticles (alloy and core-shell) as well as ionic species. The cotton-polyester textiles were successfully impregnated during the washing and ironing process by as-prepared solutions to have antibacterial and antifungal properties against to Escherichia coli, Staphylococcus aureus, and Candida albicans....
-
Preparation, Structure and Catalytic Activity of Pt–Pd Bimetallic Nanoparticles on Multi-Walled Carbon Nanotubes
Publication -
Synthesis and Characterization of Monometallic (Ag, Cu) and Bimetallic Ag-Cu Particles for Antibacterial and Antifungal Applications
PublicationIn this paper, the experimental studies are concerned with the effect of the synthesis parameters on the formation of monometallic Ag and Cu nanoparticles (NPs). We consider the synthesis strategies verification for the bimetallic core-shell and alloy particles preparation. It was successfully obtained by chemical reduction method. The obtained colloidal solution is characterized by the transmission electron microscopy (TEM) with...
-
Morphology, Photocatalytic and Antimicrobial Properties of TiO2 Modified with Mono- and Bimetallic Copper, Platinum and Silver Nanoparticles
PublicationNoble metal nanoparticles (NMNPs) enhanced TiO2 response and extended its activity under visible light. Photocatalytic activity of TiO2 modified with noble metal nanoparticles strongly depends on the physicochemical properties of NMNPs. Among others, the differences in the size of NMNPs seems to be one of the most important factors. In this view, the effect of the metal’s nanoparticles size, type and amount on TiO2 photocatalytic...
-
Water vapor induced self-assembly of islands/honeycomb structure by secondary phase separation in polystyrene solution with bimodal molecular weight distribution
Publication -
Gas‐Phase Removal of Indoor Volatile Organic Compounds and Airborne Microorganisms Over Mono‐ and Bimetal‐Modified (Pt, Cu, Ag) Titanium(IV) Oxide Nanocomposites
PublicationThe photocatalytic deactivation of volatile organic compounds and mold fungi using TiO2 modified with mono‐ and bimetallic (Pt, Cu, Ag) particles is reported in this study. The mono‐ and bimetal‐modified (Pt, Cu, Ag) titanium(IV) oxide photocatalysts were prepared by chemical reduction method and characterized using XRD, XPS, DR/UV‐Vis, BET and TEM analysis. The effect of incident light, type and content of mono‐ and bimetallic...
-
Preparation and characterization of monometallic (Au) and bimetallic (Ag/Au) modified-titania photocatalysts activated by visible light
PublicationThe Au-TiO2 and Ag/Au-TiO2 nanoparticles have been prepared using a water-in-oil microemulsion system of water/AOT/cyclohexane and water/Triton X-100/cyclohexane. The obtained photocatalysts were subsequently characterized by a BET method, DRS spectroscopy, X-ray photoelectron emission spectroscopy (XPS), scanning transmission electron microscopy (STEM) and X-ray powder diffraction analysis (XRD). For gold-doped titanium (IV) oxide...
-
Mono- and bimetallic nanoparticles decorated KTaO 3 photocatalysts with improved Vis and UV–Vis light activity
PublicationNew mono- and bimetallic nanoparticle-decorated perovskite-type KTaO3 photocatalysts were successfully synthesized by hydrothermal reaction followed by photodeposition of MNPs/BNPs. The effect of noble metal type, amount of metal precursor as well as photoreduction method on the physicochemical and photocatalytic properties of MNPs- and BNPs-KTaO3 have been investigated. Photocatalytic activity under Vis light irradiation was estimated...
-
Bimetallic Bi/Cu0-catalyzed persulfate-based advanced oxidation processes towards clofibric acid degradation in wastewater
PublicationClofibric acid (CFA), an important blood-lipid regulatory drug is an emerging organic pollutant and widely reported in water resources. A novel bimetallic, bismuth/zero valent cupper (Bi/Cu0) catalyst was prepared which showed better physiological, structural, and catalytic properties than Cu0. The Bi/Cu0 effectively catalyzed persulfate (S2O82−) and caused 85% degradation of CFA. The Bi coupling improved reusability and stability...
-
Mono- and bimetallic (Pt/Cu) titanium(IV) oxide photocatalysts. Physicochemical and photocatalytic data of magnetic nanocomposites’ shell
PublicationSurface modification of titania with noble and semi-noble metals resulted in significant enhancement of photocatalytic activity. Presented data, showing the photocatalytic properties of TiO2-M (where M is Pt and/or Cu) photocatalysts were further used as Fe3O4@SiO2/TiO2-M magnetic nanocomposites shells in "Mono- and bimetallic (Pt/Cu) titanium(IV) oxide core-shell photocatalysts with Vis light activity and magnetic separability"...
-
Wpływ współczynnika promienia walca i stosunku grubości warstw na odkształ- cenie warstwy twardej. The influence of radius of rolls coefficient and re-lations of thickness layers at the deformation of hard layers of bimetalic plate
PublicationW pracy przedstawiono analizę numeryczną walcowania blachy platerowanej 18 G2A i 0H18N10T. Wytwarzanie blach dwuwarstwowych jest procesem trudnym do rozwiązania na drodze teoretycznej. Do analizy procesu wykorzystano program Forge 2 oparty na teorii elementów skończonych. Artykuł przedstawia wpływ wartości współczynnika promienia walcaH/R i stosunku grubości warstw HT/HM na charakter rozkładu odkształceń blachy dwuwarstwowej.
-
Room temperature synthesis of water-dispersible Ln 3+ :CeF 3 (Ln = Nd, Tb) nanoparticles with different morphology as bimodal probes for fluorescence and CT imaging
Publication -
The effect of preparation route on structure and photocatalytic properties of bimetallic nanoparticles (Au/Pd, and Au/Pt) deposited at TiO2 surface
PublicationNoble metal nanoparticles have often been used to enhance the photocatalytic activity of TiO2 and to extend the absorption wavelength from the ultraviolet to visible region. Bimetallic nanoparticles, composed of two different metal elements, can exhibit peculiar electronic, optical, and catalytic or photocatalytic properties that are absent in the corresponding monometallic nanoparticles. In this work we show the effect kind and...
-
Gamma rays-assisted bacterial synthesis of bimetallic silver-selenium nanoparticles: powerful antimicrobial, antibiofilm, antioxidant, and photocatalytic activities
Publication -
The effect of metal cluster deposition route on structure and photocatalytic activity of mono- and bimetallic nanoparticles supported on TiO2 by radiolytic method
PublicationTiO2 (P25) was modified with small and relatively monodisperse mono- and bimetallic clusters (Ag, Pd, Pt, Ag/Pd, Ag/Pt and Pd/Pt) induced by radiolysis to improve its photocatalytic activity. The as-prepared samples were characterized by X-ray fluorescence spectrometry (XRF), photoluminescence spectrometry (PL), diffuse reflectance spectroscopy (DRS), X-ray powder diffractometry (XRD), scanning transition electron microscopy (STEM)...
-
Photoactivity of decahedral TiO2 loaded with bimetallic nanoparticles: Degradation pathway of phenol-1- 13 C and hydroxyl radical formation
PublicationDecahedral TiO2decorated with bimetallic nanoparticles were synthesized via radiolysis and photode-position method. The effect of bimetallic surface composition (Ag Pt, Ag Au, Au Pd, Au Pt) as well asdeposition technique (simultaneous or sequential) on the photocatalytic activity in phenol degradationand efficiency of hydroxyl radicals generation under UV–vis light irradiation were investigated. Modifiedand pristine decahedral...
-
Effect of Porosity on the Thermo-Mechanical Behavior of Friction-Stir-Welded Spark-Plasma-Sintered Aluminum Matrix Composites with Bimodal Micro- and Nano-Sized Reinforcing Al2O3 Particles
PublicationThe thermo-mechanical behavior of nanosized Al2O3 particles reinforcing aluminum was analyzed in the present paper. The material was prepared by spark plasma sintering and friction stir welding. The thermal stresses affecting the composite behavior during welding were modeled through COMSOL MultiPhysics, and the results were validated by the analyses of the composites’ mechanical properties. The spark-plasma-sintered materials...
-
Synergistic catalysis of Fe3O4/CuO bimetallic catalyst derived from Prussian blue analogues for the efficient decomposition of various organic pollutants
Publication -
Mono- and bimetallic (Pt/Cu) titanium(IV) oxide core–shell photocatalysts with UV/Vis light activity and magnetic separability
PublicationTitanium(IV) oxide is one of the most widely investigated photocatalysts. However, separation of nano-sized particulate titania might result in profitless technologies for commercial applications. Additionally, bare titania is almost inactive under the Vis range of solar spectrum due to its wide bandgap. Therefore, the present study aims to prepare novel coreinterlayer- shell TiO2 magnetic photocatalysts modified with metal nanoparticles...
-
Effect of processing parameters on the cyclic behaviour of aluminium friction stir welded to spark plasma sintered aluminium matrix composites with bimodal micro-and nano-sized reinforcing alumina particles
PublicationUnderstanding the cyclic behaviour of Alumina reinforced Aluminium composites (Al-A2O3) was of critical importance, for their further application in the different industrial sectors. The present study is focussing on the cyclic behaviour of the Al-Alumina nanocomposite produced through the combination of spark plasma sintering (SPS) method and friction stir welding (FSW). The added Alumina with total content of 10% is the combination...
-
Enhancement of photocatalytic-based processes by mono- and bimetallic (CuPd) rutile loaded nanoparticles for antibiotic resistance genes and facultative pathogenic bacteria removal
PublicationThe aim of the study was the strong reduction of facultative pathogenic bacteria (FPB), and clinically relevant antibiotic resistance genes (ARGs) from secondary effluent. To evaluate the ARGs removal efficiency comparative study of individual unit processes and combined AOPs has been performed. The present work investigated: i) removal of selected ARGs, namely blaTEM, ermB, qnrS, tetM, five FPB as well as 16S rDNA and the integrase...
-
High-temperature Co-electrolysis of CO2/H2O and direct methanation over Co-impregnated SOEC. Bimetallic synergy between Co and Ni
PublicationTo study the synergy between the transition metals for enhancing the electrochemical and chemical activity, a series of SOECs were modified with a small amount of Co ions, namely 1.8, 3.6, and 5.4 wt% in the reduced state. The addition of βCD into the precursor solution allowed for extremely fine dispersion of Co species across the Ni-YSZ cermet structure. The sample containing 3.6 wt% Co reached an outstanding over 2.5-times-higher...
-
Numeryczna analiza wpływu kierunku rozchodzenia się fali wybuchu na krzywiznę asymetrycznie walcowanego pasma Al-Cu. Numerical analysis the influence of the direction of explosion wave at the curvature of asymmetrical rolling of bimetallic plate.
PublicationW artykule przedstawiono numeryczną analizę wpływu kierunku rozchodzenia się fali wybuchu na krzywiznę asymetrycznie walcowanego pasma Al-Cu. Przeprowadzono symulacje dla procesu walcowania w temperaturze 20 C. Proces walcowania prowadzono w walcarce duo D 150 mm, o prędkości obwodowej 18,5 obr/min. Badania przeprowadzono dla dwóch stosunków grubości warstw 2/10 i 4/8. Symulację procesu przeprowadzono dla trzech gniotów 10%, 20%,...
-
Wpływ kierunku rozchodzenia się fali detonacyjnej oraz współczynnika asymetrii na rozkład prędkości odkształceń w kotlinie walcowniczej podczas asymetrycznego walcowania pasma Al-Cu. The influences of the direction of explosion wave and asymetrical coefficient at the distribution of strain rate in the roll cap of bimetallic plate Al-Cu of rolling process.
PublicationPrzedstawiono symulacje komputerowe walcowania blach Al-Cu łączonych wybuchowo. Symulacje przeprowadzono dla procesu walcowania w walcarce o średnicy walców D=150 mm z indywidualnym napędem walców roboczych. W ramach badań numerycznych określony został wpływ kierunku rozchodzenia się fali detonacyjnej na rozkład prędkości odkształcenia w kotlinie walcowniczej asymetrycznie walcowanej blachy bimetalowej Al-Cu.
-
Building Information Modeling in Small and Middle Sized Buildings – Case Study
PublicationBuilding Information Modeling (BIM) is a technology designed to improve and integrate all engineering aspects in the construction design process. Tools that incorporate the idea of BIM are becoming more advanced and also more popular. Available software solutions have already reached an assumable high level of development, but still are not as widespread and used on nearly as many construction projects as could be expected. Therefore...
-
Clinical effectiveness of primary prevention implantable cardioverter-defibrillators: results of the EU-CERT-ICD controlled multicentre cohort study
Publication -
Building Information Modelling as an opportunity and risk for stakeholders involved in construction investment process
PublicationThe requirements to apply Building Information Modelling (BIM) in public investments worldwide are currently very high. Significant interest (sometimes formulated also as a requirement) in BIM technology can be observed also among private investors. Design technology that applies BIM is supported by many private investors due to its numerous advantages. A growing group of construction designers (steel, concrete and reinforced concrete...
-
Appropriate Shocks and Mortality in Patients With Versus Without Diabetes With Prophylactic Implantable Cardioverter Defibrillators
Publication -
BUILDING INFORMATION MODELING - ANALIZA ZAKRESU I STANU IMPLEMENTACJI W POLSKIEJ BRANŻY BUDOWLANEJ
PublicationProblematyka BIM (Building Information Modeling) jest obecnie tematem wielu publikacji naukowych, ale także przedmiotem działań podejmowanych przez uczestników szeroko pojętego procesu budowlanego. Liczne zalety i szanse płynące ze stosowania technologii BIM w kolejnych etapach cyklu życia obiektu budowlanego, należy rozpatrywać z punktu widzenia inwestora/zamawiającego, architekta, projektanta konstrukcji i instalacji, dewelopera,...
-
Współczesne projektowanie mostów
PublicationW artykule zaprezentowano historyczne i współczesne aspekty projektowania mostów. Uwagę zwrócono na wirtualne, architektoniczne i funkcjonalne modele, które aktualnie zintegrowane są w środowisku BIM.
-
Simplified method of applying loads to flat slab floor structural model
PublicationThe article analyses the impact of the live load position on the surface of a reinforced concrete flat slab floor of 32.0 m × 28.8 m. Four variants of a live load position are investigated: located on the entire concrete slab, set in a chessboard pattern, applied by bands and imposed separately in each of the slab panels. Conclusions are drawn upon differences in bending moments, the time of calculation and the size of output files....
-
Synthesis, Characterization and Biological Investigations of Half-Sandwich Ruthenium(II) Complexes Containing Benzimidazole Moiety
PublicationHalf-sandwich Ru(II) complexes belong to group of biologically active metallo-compounds with promising antimicrobial and anticancer activity. Herein, we report the synthesis and characteri- zation of arene ruthenium complexes containing benzimidazole moiety, namely, [(η6-p-cymene)RuC l(bimCOO)] (1) and [(η6-p-cymene)RuCl2(bim)] (2) (where bimCOO = benzimidazole-2-carboxylate and bim = 1-H-benzimidazole). The compounds were characterized...
-
Human Resource Management Digitalisation in Multidisciplinary Ship Design Companies
PublicationThe digitalisation in the ship design sector is currently applied to the design process itself and is well defined, partially standardised and practically implemented by both independent design companies and the design departments of shipyards. The situation is similar in other sectors of engineering. However, the requirements for the digitalisation of other processes in design and engineering companies have not previously been...
-
Between Descriptive Geometry and CAD 3D
PublicationDescriptive geometry provides methods to analyse three-dimensional space through two-dimensional drawings and prepares to create technical documentation. Geometric form of an engineering project is presented by the means of projection methods based on a 3D model, which is present in designer’s imagination. The forthcoming era of Building Information Modelling (BIM) brings changes in the way the engineer works, as the vision is...
-
COOPERATION BETWEEN UNIVERSITY AND EXTERNAL COMPANY IN ARCHITECTURAL INVENTORY USING INNOVATIVE MEASURING TECHNOLOGY
PublicationArchitectural inventories are the main field for using innovative technology ( remote sensing). The main purpose of using ie. Laser scanning or photogrammetry is to capture all of the important details of structure. Regarding the extents of inventory works, it may only apply to external details, such as facades, supporting structures and surroundings, whilst in terms of advanced inventory, the building's interior is also expected...
-
Influence of Processing Conditions on Crystal Structure of Bi6Fe2Ti3O18 Ceramics
PublicationAim of the present research was to apply a solid state reaction route to fabricate Aurivillius-type ceramics described with the formula Bi6Fe2Ti3O18 (BFTO) and reveal the influence of processing conditions on its crystal structure. Pressureless sintering in ambient air was employed and the sintering temperatures were 850 and 1080 °C. It was found that the fabricated BFTO ceramics were multiphase ones. They consisted of two Bim+1Fem-3Ti3O3m+3...
-
Energy Modeling of Single-Family Houses in the Conceptual Phase
PublicationThe aim of the article is to identify the potential impact of the latest commercial digital tools for building energy analysis on the everyday architectural practice in Poland in the context of typology and energy optimization of single –family houses. The reason for this survey is that “architect friendly” interfaces simulation results’ visualization and energy analysis tools are not given deserved attention in the architectural...
-
Nowoczesne metody termografii w systemie monitorowania stanu sieci przesyłowych
PublicationW artykule przedstawiono obecnie stosowane metody inspekcji termowizyjnej, skupiając się na prewencyjnej diagnostyce stanu sieci przesyłowej. Badanie termowizyjne ma różne wymiary wpływu na efektywność energetyczną. Z jednej strony wykorzystuje się ją do inspekcji szczelności termoizolacji budynków, wpływając na świadomość, że „najtańsza energia to ta zaoszczędzona”, z drugiej strony jest narzędziem dla operatorów sieci dystrybucyjnych...
-
LEVEL OF DETAIL CATEGORIZATION FOR THE APPLICATION IN URBAN DESIGN
PublicationUrban planning and urban design involve complex processes that require detailed information about the visual information of a place at various scales. Different graphic tools, such as game engines, are evolving to use urban representation fields. The concept of "level of detail" (LOD) has been used to categorize the level of detail in AEC applications such as BIM and GML for urban representation models. However, there is a need...
-
Closing the gap – the opportunity for sustainability and smart transition in the Central and East Europe countries
PublicationFor almost half a century the countries of CEE were part of- or were remaining under the influence of- the Soviet Union what caused gaping difference in the starting line towards sustainability. Here the prefabricated concrete blocks of flats were being built at the scale unseen in the western countries. Those buildings, approximately a quarter of the residential market, are in a structurally sound condition to last another five...
-
Komputerowe modelowanie geometryczne w kształceniu architektonicznym I stopnia
PublicationDynamiczny rozwój technik cyfrowych i wynikające stąd postępujące zmiany w oprogramowaniu powodują wzrost znaczenia znajomości komputerowych metod wspomagania projektowania w warsztacie zawodowym architekta. W trosce o zapewnienie studentom możliwości rozwijania kompetencji w tym zakresie, konieczna jest stała analiza oraz potrzeba rozszerzania i wzbogacania treści programowych w ramach istniejąch programów kształcenia. Tematyka...
-
Integrating Digital Twin Technology Into Large Panel System Estates Retrofit Projects
PublicationAs sustainability is now a standard for the proposed developments, the focus ought to be shifted towards the existing buildings and, among them, the worldwide stock of large panel system (LPS) buildings. Major upgrades and retrofits were done to some of the LPS estates in Germany and France, but a leading sustainable way must still be developed for LPS buildings in Eastern European countries, where apartments in those half‐a‐century‐old...
-
Architectural Heritage Virtual Models in Conservation Practice
PublicationThe article presents the issues concerning architectural heritage digital models’ applications in conservation practice. These considerations are discussed in the context of the commencement of creating virtual models regarding no-longer existing historical buildings in the first half of the 1980s. Such models’ applications and possible uses are analyzed within the adopted criteria that distinguish the following model types....
-
From a Point Cloud to a 3D Model - an Exercise for Users of AutoCAD and Revit
PublicationThe paper presents a proposal of the topic of an exercise for students of building faculties as part of classes on 3D modelling. The task consists in creating a three-dimensional model based on the measurement obtained with the Leica P30 laser scanner. Due to the maximum number of points in the cloud in the presented programs, the output files must be properly cleared and reduced. The point cloud was pre-processed in Cyclone software....
-
Współczesny warsztat architekta
PublicationArtykuł omawia wpływ technologii komputerowej na kształt współczesnego warsztatu architektonicznego.