Filters
total: 1301
filtered: 815
Search results for: BODIPY
-
Comparison of the impact test and the harmonic test in measurements of natural resonant frequencies of circular saw blades
PublicationIn this paper results of measurements of natural resonant frequencies of circular saw blades with the impact test and the harmonic test are presented. Comparison of these two methods revealed that during testing of circular saw blades, in which bodies the open and closed notches (cuts) for cleaning of knives are present, with the harmonic test method it has been observed appearing of quasi-twin resonant frequencies, whereas the...
-
Inverse heat transfer problem solution of sounding rocket using moving window optimization
PublicationAn Inverse Heat Transfer Problem is solved for a sounding rocket module given its geometry and measured temperature profile. The solution is obtained via moving window optimization, a technique for solving inverse dynamics. An analysis is performed to modify the method to avoid oscillatory behavior of the resulting heat flux profile. The method parameters are tuned in relation to characteristic phases of the flight. Results are...
-
Influence of e-beam irradiation on poly(aliphatic/aromatic-ester) multiblock copolymers used as biomaterials
PublicationThe use of polymers became more relevant in medical applications for the versatility in processing and enhanced material properties of polymers. In order to be suitable as a biomaterial, it is of medical importance that these polymers are biocompatible and do not elicit negative responses from the body after implantation. Furthermore during the course of usage under load-bearing conditions, these biomaterials must sustain dynamical...
-
Uncovering the invisible barriers to women’s success
PublicationIn the area of science and higher education, as in business and politics, the job situation of women is improving, and the percentage of women on executive positions is increasing. However, there is still a serious underrepresentation of women in the highest decision-making bodies. Ladies also take part in the strategic institutional events less frequently. There are still serious disproportions in academic and management positions,...
-
Sintering Parameter Investigation for Bimetallic Stainless Steel 316L/Inconel 718 Composite Printed by Dual-Nozzle Fused Deposition Modeling
PublicationFused deposition modeling (FDM) nowadays offers promising future applications for fabricating not only thermoplastic-based polymers but also composite PLA/Metal alloy materials, this capability bridges the need for metallic components in complex manufacturing processes. The research is to explore the manufacturability of multi-metal parts by printing green bodies of PLA/multi-metal objects, carrying these objects to the debinding...
-
Badanie i analiza efektywności alokacji strumieni danych w heterogenicznej sieci WBAN
PublicationW niniejszej dysertacji doktorskiej poddano dyskusji efektywność alokacji strumieni danych w heterogenicznej radiowej sieci WBAN (Wireless Body Area Networks). Biorąc pod uwagę dynamiczny rozwój nowoczesnych sieci radiokomunikacyjnych piątej generacji (5G), którego część stanowią radiowe sieci działające w obrębie ciała człowieka, bardzo ważnym aspektem są metody maksymalizujące wykorzystanie dostępnych zasobów czasowo –częstotliwościowych...
-
4-[(tert-Butyldimethylsilyl)oxy]-6-methoxy-7-methyl-5-(oxiran-2-ylmethyl)-2-benzofuran-3(1H)-one
PublicationThe title compound, C19H28O5Si, was obtained in the reaction of 1,3-dihydro-4-[(tert-butyldimethylsilyl)oxy]-6-methoxy-7-methyl-3-oxo-5-(prop-2-enyl)isobenzofuran with meta-chloroperbenzoic acid. This reaction is one of the stages of the total synthesis of mycophenolic acid, which we attempted to modify. The title compound forms crystals with only weak intermolecular interactions. The strongest stacking interaction is found between...
-
Influence of Dielectric Overlay Dimensions on Performance of Miniaturized ESPAR Antenna
PublicationIn this paper, the influence of dielectric overlay size on miniaturized ESPAR antenna performance has been investigated. The dielectric overlay’s main function is antenna’s size reduction but it can also be used to modify its radiation pattern. This creates the possibility of easy adopting antenna parameters to different applications by swapping used overlay. In particular, the lowering of antenna’s main beam elevation direction...
-
Accuracy of Trajectory Tracking Based on Nonlinear Guidance Logic for Hydrographic Unmanned Surface Vessels
PublicationA new trend in recent years for hydrographic measurement in water bodies is the use of unmanned surface vehicles (USVs). In the process of navigation by USVs, it is particularly important to control position precisely on the measuring profile. Precise navigation with respect to the measuring profile avoids registration of redundant data and thus saves time and survey costs. This article addresses the issue of precise navigation...
-
Application of the distributed transfer function method and the rigid finite element method for modelling of 2-D and 3-D systems
PublicationIn the paper application of the Distributed Transfer Function Method and the Rigid Finite Element Method for modelling of 2-D and 3-D systems is presented. In this method an elastic body is divided into 1-D distributed parameter elements (strips or prisms). The whole body (divided into strips or prism) is described by a set of coupled partial differential equations. Solving this equations in the state space form it is possible...
-
Nowa adaptacyjna metoda alokacji strumieni danych oparta na estymacie parametrów kanału radiowego w heterogenicznej sieci WBAN
PublicationW artykule przedstawiono nową metodę adaptacyjnej alokacji strumieni danych w heterogenicznej sieci WBAN (Wireless Body Area Network) typu off-body oraz wykonane stanowisko badawcze. Wyniki uzyskane przy użyciu opracowanej metody porównano z wybranymi algorytmami możliwymi do zastosowania w tychże sieciach. Wykazano zwiększenie efektywności wykorzystania dostępnych zasobów czasowo-częstotliwościowych niezależnie od miejsca montażu...
-
BADANIE I ANALIZA METOD ALOKACJI STRUMIENI DANYCH W HETEROGENICZNYCH SIECIACH WBAN
PublicationW artykule przedstawiono nową metodę adaptacyjnej alokacji strumieni danych w heterogenicznej sieci WBAN (Wireless Body Area Network) typu off-body oraz wykonane stanowisko badawcze. Wyniki uzyskane przy użyciu opracowanej metody porównano z wybranymi algorytmami możliwymi do zastosowania w tychże sieciach. Wykazano zwiększenie efektywności wykorzystania dostępnych zasobów czasowo-częstotliwościowych niezależnie od miejsca montażu...
-
Knowledge representation of motor activity of patients with Parkinson’s disease
PublicationAn approach to the knowledge representation extraction from biomedical signals analysis concerning motor activity of Parkinson disease patients is proposed in this paper. This is done utilizing accelerometers attached to their body as well as exploiting video image of their hand movements. Experiments are carried out employing artificial neural networks and support vector machine to the recognition of characteristic motor activity...
-
Enhanced-Performance Circularly Polarized MIMO Antenna with Polarization/Pattern Diversity
PublicationDesign of a compact wideband circularly polarized (CP) multiple-input multiple-output (MIMO) antenna with polarization diversity is proposed and characterized for off-body communication. The antenna is based on a simple coplanar waveguide (CPW)-fed monopole extension of the microstrip line. The orthogonal field components required by CP are induced using a simply modified right/left side ground plane. In particular, a stub extending...
-
Koncepcja systemu wspomagania decyzji nawigatora statku opartego na ewolucyjnym planowaniu manewrów antykolizyjnych
PublicationArtykuł przedstawia koncepcję systemu wspomagania decyzji nawigatora statku opartego na wątkach badań prowadzonych wcześniej przez autora. System będzie rozszerzał funkcjonalność systemów dotychczasowych o możliwość szczegółowego planowania bezpiecznej trajektorii statku na wodach zamkniętych, z dużą liczbą statków obcych i ograniczeniami toru wodnego. Artykuł zawiera dyskusję możliwych podejść do planowania manewrów, optymalizacji...
-
Modelling and Simulation of a New Variable Stiffness Holder for Milling of Flexible Details
PublicationModern industry expectations in terms of milling operations often demand the milling of the flexible details by using slender ball-end tools. This is a difficult task because of possible vibration occurrence. Due to existence of certain conditions (small depths of cutting, regeneration phenomena), cutting process may become unstable and self-excited chatter vibration may appear. Frequency of the chatter vibration is close to dominant...
-
Multibody models for gait analysis
PublicationThe aim of this study was to create multibody biomechanical models to analyze a normal gait of the human. Proposed models can be used to identify joint moments of the lower limbs during normal gait in the single and double support phases. Applying Newton-Euler formulation, following planar models were developed: 1) a mathematical 6DOF model describing a gait in the sagittal plane of the body for single support phase and double...
-
Dynamika bezzałogowego aparatu latającego w układzie czterowirnikowego pionowzlotu
PublicationDziałanie maszyn, w tym również pojazdów latających, jest nieodłącznie związane z przekazywaniem oddziaływań siłowych: statycznych i dynamicznych. Dynamika jest działem mechaniki zajmującym się makroskopowym ruchem ciał przy uwzględnieniu przyczyn wywołujących ten ruch. Pierwszym etapem analizy dynamiki konstrukcji są zwykle obliczenia wartości i postaci drgań własnych modelu konstrukcji. Drgania własne zwykle ulegają szybkiemu...
-
Improved method for real-time speech stretching
Publicationn algorithm for real-time speech stretching is presented. It was designed to modify input signal dependently on its content and on its relation with the historical input data. The proposed algorithm is a combination of speech signal analysis algorithms, i.e. voice, vowels/consonants, stuttering detection and SOLA (Synchronous-Overlap-and-Add) based speech stretching algorithm. This approach enables stretching input speech signal...
-
POPRAWA OBIEKTYWNYCH WSKAŹNIKÓW JAKOŚCI MOWY W WARUNKACH HAŁASU
PublicationCelem pracy jest modyfikacja sygnału mowy, aby uzyskać zwiększenie poprawy obiektywnych wskaźników jakości mowy po zmiksowaniu sygnału użytecznego z szumem bądź z sygnałem zakłócającym. Wykonane modyfikacje sygnału bazują na cechach mowy lombardzkiej, a w szczególności na efekcie podniesienia częstotliwości podstawowej F0. Sesja nagraniowa obejmowała zestawy słów i zdań w języku polskim, nagrane w warunkach ciszy, jak również w...
-
In-situ optical diagnostics of boron-doped diamond films growth
PublicationInterferometry is a desirable method for in-situ measurement of thin, dielectric film growth, as it don't modify conditions of film deposition. Here we present interferometrical measurements of thickness of doped diamond films during Chemical Vapor Deposition (CVD) process. For this purpose we used a semiconductor laser with a 405nm wavelength. Additional ex-situ measurement using spectral interferometry and ellipsometry...
-
Improving sensitivity of residual current transformers to high frequency earth fault currents
PublicationFor protection against electric shock in low voltage systems residual current devices are commonly used. However, their proper operation can be interfered when high frequency earth fault current occurs. Serious hazard of electrocution exists then. In order to detect such a current, it is necessary to modify parameters of residual current devices, especially the operating point of their current transformer. The authors proposed...
-
The effect of laser on metal surfaces for multidisciplinary usage in material and thermal engineering
PublicationThe subject of heat transfer and cooling systems is still a matter of contention in many different fields of science and industry. Infrigidation is much more difficult than warming, and so, much more needed in more and more different devices, starting from massive industrial machinery and air conditioning in commercial buildings, up to micro and nano-surgery tools. In fact, the size of many cooling systems is still a problem. It...
-
A Population-Based Method with Selection of a Search Operator
PublicationThis paper presents a method based on a population in which the parameters of individuals can be processed by operators from various population-based algorithms. The mechanism of selecting operators is based on the introduction of an additional binary parameters vector located in each individual, on the basis of which it is decided which operators are to be used to modify individuals’ parameters. Thus, in the proposed approach,...
-
A shared curriculum for daylighting education to meet the educational needs of society
PublicationThis article describes the collaborative creation of the curriculum for a new eLearning programme on daylighting design of buildings targeting both traditional and lifelong learners. The programme consists of an online platform integrated with a summer school for practical applications. The process was conducted through several workshops with professionals, representatives of national bodies on building regulations, academics,...
-
Immunosuppressive properties of amino acid and peptide derivatives of mycophenolic acid
PublicationMycophenolic acid (MPA) was coupled with amino acids and biologically active peptides including derivatives of tuftsin to modify its immunosuppressive properties. Both amino acid unit in the case of simple MPA amides and modifications within peptide moiety of MPA - tuftsin conjugates influenced the observed activity. Antiproliferative potential of the obtained conjugates was investigated in vitro and MPA amides with threonine methyl...
-
Conducting polymers for biodegradable metallic implants
PublicationNowadays permanent metallic cardiovascular stents are long-term implants. The long-time presence of such an implant in human body can cause overgrowth of tissue within the treated portion of the vessel, blockage of the circulatory system and many other clinical complications, such as thrombosis, prolonged physical irritations or chronic inflammation. Therefore, in recent years, there is an interest to create biodegradable metallic...
-
Calculations of notch stress factor of a thin-walled spreader bracket fillet weld with the use of a local stress approach
PublicationPresence of geometric notches in welded joints causes concentration of strains and stresses, therefore reducing fatigue strength of such joints. This article presents an analysis of stress concentrations in a fillet weld of a spreader mounting bracket on a small sailing yacht. The aim of this article is to direct the attention of designers, manufacturers and regulatory bodies to issues of fatigue cracks that form in brackets fastening...
-
Underwater Navigation Ssystem Based on Doppler Shift – Measurements and Error Estimations
PublicationA new acoustic navigation system was developed to determine the position and speed of moving underwater objects such as divers and underwater vehicles. The path of an object and its speed were determined by the Doppler shifts of acoustic signals emitted by a transmitter placed on the object and received by four hydrophones installed at the periphery of the monitored body of water. The position and speed measurements were affected...
-
Current situation in Polish nuclear medicine and Polish example of model Nuclear Medicine Centre meeting European Union requirements
PublicationNuclear medicine is currently a well-established part of medicine. It is applied in many fields of clinical medicine and science like endocrinology, oncology, cardiology, molecular medicine and engineering, radiopharmacy, physics and information science. Due to its increasing importance and application, several regulation and supervision bodies have been founded to ensure safe usage of radiation and to improve diagnostic and therapeutic...
-
Age Prediction from Low Resolution, Dual-Energy X-ray Images Using Convolutional Neural Networks
PublicationAge prediction from X-rays is an interesting research topic important for clinical applications such as biological maturity assessment. It is also useful in many other practical applications, including sports or forensic investigations for age verification purposes. Research on these issues is usually carried out using high-resolution X-ray scans of parts of the body, such as images of the hands or images of the chest. In this...
-
IoT for healthcare applications
PublicationThis chapter summarizes IRACON contributions related to the application of IoT in healthcare. It consists of the following three sections. Section 8.1 presents the measurement campaigns and the related statistical analysis to obtain various channel models for wearable and implantable devices. In addition, the importance of physical human-body phantoms used for channel, Specific Absorption Rate (SAR), and Electromagnetic (EM) exposure...
-
The degradation of metal implants
PublicationThe presence of metal implants in the human body causes some dangers, which result from introducing another object into organism. There may occur a biocorrosion, which causes different modifications of implant surface.
-
Mercury concentration and the absolute and relative sizes of the internal organs in cormorants Phalacrocorax carbo (L. 1758) from the breeding colony by the Vistula Lagoon (Poland)
PublicationThis work analyses the effect of mercury on the condition of cormorants (Phalacrocorax carbo) from an extensive breeding colony in northern Poland, the largest in Europe. A total of 55 birds (44 adults and 11 immature) were obtained. Total mercury (Hg) concentrations were measured in the liver, kidneys, breast muscles, heart, gullet (oesophagus), stomach, intestines, trachea, lungs and eyeballs. The total body mass (TBM) and empty...
-
Nonlinear Impedance as Possible Result of Ion-Polaron Interaction in Cu2O-Al2O3-SiO2 Glass
PublicationNonlinear a.c. impedance measurements were performed in Cu2O-Al2O3-SiO2 glass in wide frequency range. The obtained results shows that a large nonlinearity in the impedance signal is observed at moderate electric fields of an order 1V/mm. The contents of the third harmonics reaches about 10% and strongly depends on temperature and frequency. The investigated glass exhibits mixed electronic-ionic conductivity. Electronic conduction...
-
The effect of processing on the safety and nutritional value
PublicationAgricultural crops as well as animal food raw materials are usually somehow processed before being used by humans. Processing should make them more useful, increase their safety and nutritional value, extend the shelf life, and modify the sensory properties. However, changes and interactions of various compounds in the conditions of processing may generate products toxic or otherwise unsafe for the human organism. The food industry...
-
HYBRID ENERGY SYSTEM FOR A CLASSIC SHIP POWER PLANT
PublicationThe article presents a brief overview of hybrid energy systems used on ships. The area of their application is outlined. The benefits of using such systems are also indicated. Then, the classic ship power plant is defined. The most important part of the article is a proposal how to modify a classic engine room by using a hybrid energy system. The idea is: to accumulate a part of electricity in areas where it is allowed to burn...
-
Thermoplastic elastomer filaments and their application In 3D printig
PublicationThe paper provides an overview on the materials used in the 3D printing technology (the Polish and foreign market) with a particular focus on flexible filaments and their possible application in the industry. There are described the techniques of 3D printing and modern filaments available on the market. There is observed the increase of interest in the production of products from filaments based on thermoplastic elastomers (TPE),...
-
Superconductivity of Ta-Hf and Ta-Zr alloys: Potential alloys for use in superconducting devices
PublicationThe electronic properties relevant to superconductivity are reported for bulk Ta-Hf and Ta-Zr body centered cubic alloys, in a large part to determine whether their properties are suitable for potential use in superconducting qbits. The body centered cubic unit cell sizes increase with increasing alloying. The results of magnetic susceptibility, electrical resistivity, and heat capacity characterization are reported. While elemental...
-
The Use of Vegetables in the Biomonitoring of Cadmium and Lead Pollution in the Environment
PublicationLead and cadmium emitted from various anthropogenic sources have the ability to accumulate in tissues of living organisms. The phenomenon of accumulation of metals in the body is harmful and undesirable. On the other hand, the ability of plants to accumulate heavy metals from the individual elements of the environment has been used in biomonitoring of pollution. Leaf and root of vegetables have particular predisposition for accumulating...
-
Bioaccumulation of metals in tissues of marine animals, Part II - metal concentrations in animal tissues
PublicationThe bioaccumulation of metals in an animal depends on a multitude of factors: biotic ones, like its body dimensions and mass, age, sex, diet, metabolism and position in the trophic web, as well as abiotic ones such as the distribution of metals in its environment, the salinity, temperature and pH of the water, habitat type, interactions with other metals. But it is diet that has the greatest influence on the accumulation of metals...
-
Insights into oral microbiome and colorectal cancer – on the way of searching new perspectives
PublicationMicrobiome is a keystone polymicrobial community that coexist with human body in a beneficial relationship. These microorganisms enable the human body to maintain homeostasis and take part in mechanisms of defense against infection and in the absorption of nutrients. Even though microbiome is involved in physiologic processes that are beneficial to host health, it may also cause serious detrimental issues. Additionally, it has been...
-
TIME- AND FREQUENCY-DOMAIN QUASI-2D SMALL-SIGNAL MOSFET MODELS
PublicationA novel approach to small-signal MOSFET modeling is presented in this book. As a result, time- and frequency-domain physics-based quasi-2D NQS four-terminal small-signal MOSFET models are proposed. The time-domain model provides the background to a novel DIBL-included quasi‑2D NQS four-terminal frequency-domain small-signal MOSFET model. Parameters and electrical quantities of the frequency-domain model are described by explicit...
-
Vibration Surveillance System with Variable Stiffness Holder for Milling Flexible Details
PublicationEfficient milling of the flexible details (i.e. rotor blades, thin-walled elements) using slender ball-end tools is a difficult task due to possibility of vibration occurrence. Because of the existence of certain conditions (small depths of cutting, regeneration phenomena), cutting process may lose stability and self-excited chatter vibration may appear. Frequency of the chatter vibration is close to dominant natural frequency...
-
Modal Adjustment of Rayleigh Based Structural Damping and Coordinate-Partitioning Algorithm Dedicated to Frictionless Contact Constraints between Multibody System and Structure Modelled with Finite Elements
PublicationThe paper presents a dedicated numerical algorithm. The algorithm is advantageous during investigations of the dynamics of a hybrid multibody / finite-elements system. We focus our attention on interactions resulting from mechanical contact. Pointwise contact connects a vertex of the multibody structure and a surface of the elastic reference body. Instead of a positive value of the relative penetration factor, constraint equations...
-
IN VIVO DEGRADATION OF BIOMATERIALS
PublicationThe material designed to be introduced into the human tissue should be biocompatible and biofunctional. Unless it is so, the body may respond to the implant in different ways. An inflammation reaction may appear such as: parting of items of the implant surface resulting from fraction or pressure. The condition of the surface has an important influence on the usefulness of the implant. The required values depend on the implant function...
-
Aktualne trendy w zakresie certyfikacji normatywnych systemów zarządzania w branży spożywczej
PublicationW opracowaniu omówiono aktualne trendy dotyczące certyfikacji systemu zarządzania jakością w sektorze rolno-spożywczym. Na podstawie danych uzyskanych z dużej, renomowanej jednostki certyfikującej przedstawiono analizę porównawczą dotyczącą liczby wydanych certyfikatów dla ogólnych systemów zarządzania oraz dla systemów branżowych dedykowanych sektorowi rolno-spożywczemu w odniesieniu do przedsiębiorstw różnych wielkości.
-
Żywność funkcjonalna- najważniejsze osiągnięcia w zakresie badań i wykorzystania
PublicationW wielu ośrodkach naukowych trwają badania ukierunkowane na poznanie mechanizmów działania składników żywności funkcjonalnej na poziomie ekspresji genetycznej, co stwarza możliwość precyzyjniejszego scharakteryzowania funkcji bioaktywnych składników diety z uwzględnieniem zmienności genetycznej populacji. Daje to w efekcie bardziej wiarygodne wyniki badań naukowych dotyczących wpływu bioaktywnych składników diety na funkcjonowanie...
-
MIASTO PORTOWE – STRUKTURA, WYZWANIA FUNKCJONALNE I MODELE ROZWOJU
PublicationPort cities are having different spatial structure than those located inlands. As a result of their seaside location, they face specific administrative and functional problems on a daily basis. In the economic and settlement structure of the country, they usually play the role of a "gate" through which streams of cargo are distributed further over the whole hinterland. It is the transport and logistics function of port cities,...
-
Polyurethane Nanocomposites Containing Reduced Graphene Oxide, FTIR, Raman, and XRD Studies
PublicationRecently, graphene and other graphene-based materials have become an essential part of composite science and technology. Their unique properties are not only restricted to graphene but also shared with derivative compounds like graphene oxide, reduced graphene oxide, functionalized graphene, and so forth. One of the most structurally important materials, graphene oxide (GO), is prepared by the oxidation of graphite. Though removal...