Search
Filters
total: 2007
displaying 1000 best results Help
Search results for: electroplated tools
-
Lateral forces determine dimensional accuracy of the narrow‑kerf sawing of wood
PublicationThe shrinking global forest area limits the supply of industrially usable raw resources. This, in combination with the ever‑increasing consumption of timber due to population growth can lead to the lack of a positive balance between the annual volumetric growth and consumption of wood. An important innovation toward increasing environmental and economic sustainability of timber production is to reduce the volume of wood residues...
-
Integrating Digital Twin Technology Into Large Panel System Estates Retrofit Projects
PublicationAs sustainability is now a standard for the proposed developments, the focus ought to be shifted towards the existing buildings and, among them, the worldwide stock of large panel system (LPS) buildings. Major upgrades and retrofits were done to some of the LPS estates in Germany and France, but a leading sustainable way must still be developed for LPS buildings in Eastern European countries, where apartments in those half‐a‐century‐old...
-
Catalytic Mechanism of Non-Target DNA Cleavage in CRISPR-Cas9 Revealed by Ab Initio Molecular Dynamics
PublicationCRISPR-Cas9 is a cutting-edge genome editing technology, which uses the endonuclease Cas9 to introduce mutations at desired sites of the genome. This revolutionary tool is promising to treat a myriad of human genetic diseases. Nevertheless, the molecular basis of DNA cleavage, which is a fundamental step for genome editing, has not been established. Here, quantum–classical molecular dynamics (MD) and free energy methods are used...
-
The innovations services in Scania company
PublicationThis chapter shows us the service innovations in Scania company. Current research were based on actual situation on market and were supported by tools which help to generate innovative ideas. The new product will not only benefit the company and its clients, but also improve the situation on the market.
-
Energy Modeling of Single-Family Houses in the Conceptual Phase
PublicationThe aim of the article is to identify the potential impact of the latest commercial digital tools for building energy analysis on the everyday architectural practice in Poland in the context of typology and energy optimization of single –family houses. The reason for this survey is that “architect friendly” interfaces simulation results’ visualization and energy analysis tools are not given deserved attention in the architectural...
-
Improvement of Task Management with Process Models in Small and Medium Software Companies
PublicationSmall and medium software companies exhibit many special features that give reason for a dedicated approach to process improvement. They often cannot afford implementing maturity models or quality standards both in terms of time and money. Instead, they expect simpler solutions that can allow to run projects in more systematic and repeatable way, increase quality and knowledge management. In this paper, we present a method focused...
-
Research into the Movements of Surface Water Masses in the Basins Adjacent to the Port
PublicationThis paper presents the results of the practical and simulation research into determining the routes of movement of small objects moving together with surface water masses in basins adjacent to the port. The results of this research were referenced against the modelling of routes of small objects in port channel basins. The results of practical research concerning the movement of small objects in basins adjacent to the port were...
-
The role of numerical tests in assessing road restraint system functionality
PublicationKey to understanding the needs and building road infrastructure management tools to prevent and mitigate run-off-road accidents is to identify hazards and their sources which are a result of wrong design, construction, and installation of road restraint systems. Building such tools requires advanced studies with field tests, simulations and models to demonstrate the effects of selected parameters on road user safety. The research...
-
Local Planning - Summer 2024
e-Learning CoursesLocal Planning, Spatial Management Course focuses on the practical aspects of the local planning both spatial and communal. Topics such as policy measures and tools used by the local government to guide provision of the local services and planning will be discussed. The course is complementary to 'Comprehensive Planning'. Course is delivered in English.
-
Stereostructure of mycoheptin A2
PublicationThe absolute configurations of all the stereogenic centers of the antibiotic mycoheptin A2 were established upon previouslyelaborated general procedure, consisting of DQF-COSY, NOESY, ROESY, HSQC and HMBC experiments as major tools. Thestructure of mycoheptin A2 without stereochemistry of its aglycone has been reported before.
-
Enterprise Gamification - Learning as a Side Effect of Competition
PublicationGmification in companies can be used for driving desired employees behaviour that are advantageous to their development and performance improvement. This paper presents tools acquired from online social networking services and game mechanisms to encourage managers to compete by providing extended statistics and user profiles features in e-learning system.
-
Information Theory and Coding 2023/2024
e-Learning CoursesThe course is an auxiliary tool for completing the subject Information Theory and Coding.
-
Stereostructure of mycoheptin A2
PublicationThe absolute configurations of all the stereogenic centers of the antibiotic mycoheptin A2 were established upon previously elaborated general procedure, consisting of DQF-COSY, NOESY, ROESY, HSQC and HMBC experiments as major tools. The structure of mycoheptin A2 without stereochemistry of its aglycone has been reported before.
-
Pin Angle Thermal Effects on Friction Stir Welding of AA5058 Aluminum Alloy: CFD Simulation and Experimental Validation
PublicationThe friction stir welding (FSW) of tool pin geometry plays a critical role in the final properties of the produced joint. The tool pin geometry directly affects the generation of heat and the flow of internal materials during the FSW process. The effects of the FSW tool pin angle on heat generation and internal flow have not been quantitatively investigated in detail. In this manuscript, a validated Computational Fluid Dynamic...
-
An Analysis of Contextual Aspects of Conceptualization: A Case Study and Prospects
PublicationIn this chapter we present a new approach to development of modularized knowledge bases. We argue that modularization should start from the very beginning of modeling, i.e. from the conceptualization stage. To make this feasible, we propose to exploit a context-oriented, semantic approach to modularization. This approach is based on the Structural Interpretation Model (SIM) presented earlier elsewhere. In the first part of thischapter...
-
Modeling the Customer’s Contextual Expectations Based on Latent Semantic Analysis Algorithms
PublicationNowadays, in the age of Internet, access to open data detects the huge possibilities for information retrieval. More and more often we hear about the concept of open data which is unrestricted access, in addition to reuse and analysis by external institutions, organizations and people. It’s such information that can be freely processed, add another data (so-called remix) and then published. More and more data are available in text...
-
Hybrid Laboratory of Radio Communication With Online Simulators and Remote Access
PublicationContribution: Two toolsets for the remote teaching of radio communication laboratory classes: 1) online simulators for individual work of students and 2) a remote access system to laboratory workstations for group work. Initial assumptions and method of implementation of both tools are presented. Background: The COVID-19 pandemic has forced a change in teaching at all levels of education. The specificity of practical classes, such...
-
Wpływ struktur wsparcia na efektywność nauczania języka pisanego w środowisku e-learningowym
PublicationThe process of knowledge and language skills development during an online course can be very effective if student engagement in learning is achieved. This can be attained by introducing general and specific support mechanisms prior to the commencement of the course and during it. The former relates to the technological aspect, that is to familiarizing students with the functionalities of the virtual learning environment they will...
-
Artificial intelligence for software development — the present and the challenges for the future
PublicationSince the time when first CASE (Computer-Aided Software Engineering) methods and tools were developed, little has been done in the area of automated creation of code. CASE tools support a software engineer in creation the system structure, in defining interfaces and relationships between software modules and, after the code has been written, in performing testing tasks on different levels of detail. Writing code is still the task...
-
The Impact of Information and Communication Technology on the Rise of Urban Social Movements in Poland
PublicationThe chapter examines the relationship between the use of Information and Communications Technology (ITC) and the emergence of social movements focused on urban agenda in Poland. The aim is to investigate how and to what extent a growing body of smaller activist groups use opportunities provided by the ITC to achieve their political objectives. The research results indicate that Web-based media have helped to raise the profile...
-
The Impact of Information and Communications Technology on the Rise of Urban Social Movements in Poland
PublicationThe chapter examines the relationship between the use of Information and Communications Technology (ITC) and the emergence of social movements focused on urban agenda in Poland. The aim is to investigate how and to what extent a growing body of smaller activist groups use opportunities provided by the ITC to achieve their political objectives. The research results indicate that Web-based media have helped to raise the profile of...
-
The structure of knowledge resources supporting a model of IT technologies architecture = Struktury zasobów wiedzy wspierających model architektury technologii IT
PublicationThis paper introduces an abstract model for tools used in the software engineering process. The main goal of the research is to develop a universal model which allows a description of tools used in the process. The model supports a decision making process and gives an option to choose the best tooling for the situation. The model considers many factors including, but not exclusive to, the company structure, project environment...
-
Influence of Honing Parameters on the Quality of the Machined Parts and Innovations in Honing Processes
PublicationThe article presents a literature review dealing with the effect of the honing parameters on the quality of the machined parts, as well as with the recent innovations in honing processes. First, an overview about the honing and the plateau-honing processes is presented, considering the main parameters that can be varied during machining. Then, the influence of the honing parameters on surface finish, shape deviation and material...
-
IMAGE CORRELATION AS A TOLL FOR TRACKING FACIAL CHANGES CAUSING BY EXTERNAL STIMULI
PublicationExpressions of the human face bring a lot of information, which are a valuable source in the areas of computer vision, remote sensing and affective computing. For years, by analyzing the movement of the skin and facial muscles scientists are trying to create the perfect tool, based on image analysis, allowing the recognition of emotional states of human beings. To create a reliable algorithm, it is necessary to explore and examine...
-
An updated method identifying collision-prone locations for ships. A case study for oil tankers navigating in the Gulf of Finland
PublicationTo ensure the risk level associated with continuously increasing maritime traffic through particularly sensitive sea areas remains at acceptable level, a periodic risk assessment needs to be carried out by the relevant authorities. As a part of such assessment, allowing for proactive countermeasures to mitigate risk, the frequency of accidents is estimated along with the assessment of geographical locations where the accidents...
-
The added value of using the HEPA PAT for physical activity policy monitoring: a four-country comparison
PublicationBackground Public policy is increasingly recognized as an important component of physical activity promotion. This paper reports on the current status of physical activity policy development and implementation in four European countries based on the Health-Enhancing Physical Activity Policy Audit Tool (HEPA PAT) developed by WHO. It compares the findings to previous studies and discusses the general utility of this tool and its...
-
Przydział narzędzi obróbkowych a efektywność szeregowania zadań produkcyjnych
PublicationThe paper addresses issues concerning the analysis of tool flow within a multi-machine machining cell, designated to small batch manufacturing a definite spectrum of prismatic parts. The approach utilises a method for job and tool allocation to work centres with limited number of machines and capacity of tool resources, based on the analysis of formalised relations: job - tool sets required. Selected allocation strategies are considered...
-
Modern trends in internet marketing - Researching the virality of brands on social media channels
PublicationThis paper presents a new approach for the research and identification of users generated content on social media channels. For the online branding research is proposed the use of twi software - SentiOne and NodeXL. The combination of those tools elicit a different point of view of how to manage in an effective way the overflow of the content publish by single individuals in social media networks.
-
Modelling processes for Polish civil aviation market
PublicationThe present , paper is the first step in research of Polish civil aviation market, focusing on the area of civil, legacy airlines. First, the market is described with its players, current conditions and its main problems. Next, the tools which are currently used for the prognosis processes are presented. Finally, the idea of a new model (fuzzy model) for the process of prognosis is presented.
-
Modern trends in internet marketing - Researching the virality of brands on social media channels
PublicationThis paper presents a new approach for the research and identification of users generated content on social media channels. For the online branding research is proposed the use of twi software - SentiOne and NodeXL. The combination of those tools elicit a different point of view of how to manage in an effective way the overflow of the content publish by single individuals in social media networks.
-
Technological Problems in Lapping on Flat Surfaces of Ceramic Parts
PublicationThis paper will present the results of research on single-disc lapping of flat surfaces of small ceramic elements. Machining with the use of different tools such as metallic, two-metallic and abrasive-metallic will be analyzed. The basics and techniques of reinforcement of laps will be discussed. The results of the influence of parameters on the surface quality of ceramic conponents (sealing) for three treatments on lapping machines...
-
Mobile Activity Plan Applications for Behavioral Therapy of Autistic Children
PublicationThis paper concerns technological support for behavioral therapy of autistic children. A family of tools dedicated for mobile devices is presented, that allows to design and perform an activity schedule in behavioral therapy. The paper describes the main challenges, that were encountered, especially in meeting the non-functional requirements of the application: simplicity, repeatability, robustness, personalization, re-usability...
-
Jerzy Proficz dr hab. inż.
PeopleJerzy Proficz, Ph.D. is the director of the Centre of Informatics – Tricity Academic Supercomputer & networK (CI TASK) at Gdansk University of Technology, Poland. He earned his Ph.D. (2012) in HPC (High Performance Computing) in the subject of supercomputer resource provisioning and management for on-line data processing D.Sc. (2022) in the discipline: Information and Communication Technology. Author and co-author of over 50...
-
Rzeczywistość rozszerzona – potencjał w kształceniu (przyszłych) pomorskich inżynierów
PublicationEdukacja młodzieży w zakresie nauk eksperymentalnych – takich jak chemia i fizyka – stanowi obecnie w obliczu ograniczeń zaplecza dydaktycznego w szkołach ogromne wyzwanie. Placówki edukacyjne nie posiadają często odpowiednich laboratoriów, lecz dysponują pracowniami komputerowymi. W ramach Projektu EDUAR, współfinansowanego przez NCBiR, przeprowadzono badania w 20 szkołach – po 10 z obszarów wiejskich i miejskich, podczas których...
-
Podstawowe narzędzia Lean Manufacturing
PublicationNiniejsza książka powstała w oparciu o doświadczenia wdrożeniowe LeanQ Team i samej autorki zdobywane na przestrzeni dziesięciu lat we współpracy z kilkuset firmami. Książka ta jest podręcznikiem dla poczatkujących, ale wierzę, że i doświadczeni praktycy znajdą w niej kilka inspiracji. Pisząc tę książkę starałam się odpowiedzieć na potrzeby tych, którzy zauważyli, że są na rynku konkurencyjne firmy, które uzyskują lepsze...
-
Stefan Dzionk dr hab. inż.
People -
Optoelectronic system for monitoring of thin diamond layers growth
PublicationDevelopment of the optoelectronic system for monitoring of diamond/DLC (Diamond-Like-Carbon) thin films growth during mu PA ECR CVD (Microwave Plasma Assisted Electron Cyclotron Resonance Chemical Vapour Deposition) process is described. The multi-point Optical Emission Spectroscopy (OES) and Raman spectroscopy were employed as non-invasive optoelectronic tools. Dissociation of H-2 molecules, excitation and ionization of hydrogen...
-
Using Moodle as a Solution to Interdisciplinary E-collaboration Issues
PublicationRapid technological development in recent years has contributed to numerous changes in many areas of life, including education and communication. Establishing interdisciplinary collaboration brings many benefits, however, it is often associated with numerous problems and inconveniences, as well as the need of constant improvement, lifelong learning, professional development (CPD) and finding an effective way of information transferring....
-
The Effects of Pin Profile on HDPE Thermomechanical Phenomena during FSW
PublicationFriction stir welding (FSW) of polymeric materials has recently attracted significant attention. Herein, we present the effect of the tool pin profile on the FSW of high-density polyethylene (HDPE) joints through joint experimental analysis and thermomechanical simulations. For analysis of pin profile effects on the thermomechanical properties of HDPE joints, frustum (FPT), cubic (CPT), and triangular (TPT) pin shapes were selected...
-
Assessment of toxic and endocrine potential of substances migrating from selected toys and baby products
PublicationAnalysis of literature data shows that there is limited information about the harmful biological effects of mixture of compounds from the EDC group that are released from the surface of toys and objects intended for children and infants. One of the tools that can be used to obtain such information is appropriate bioanalytical tests. The aim of this research involved determining whether tests that use living organisms as an active...
-
Friction Stir Welding of Aluminum in the Aerospace Industry: The Current Progress and State-of-the-Art Review
PublicationThe use of the friction stir welding (FSW) process as a relatively new solid-state welding technology in the aerospace industry has pushed forward several developments in different related aspects of this strategic industry. In terms of the FSW process itself, due to the geometric limitations involved in the conventional FSW process, many variants have been required over time to suit the different types of geometries and structures,...
-
Sustainable development model for measuring and managing sustainability in the automotive sector
PublicationA growing number of organizations across a variety of industries are now pursuing sustainable management business goals to improve business efficiency, manage stakeholder expectations, or for legislative compliance. This is also the case for automotive manufacturing organizations who are under pressure from their stakeholders to manage and improve sustainability performance. This requires the development of credible measurement...
-
QUANTITATIVE EASING POLICY AND ITS IMPACT ON THE GLOBAL ECONOMY
PublicationBased on the analysis of the impact of quantitative easing policies on the global economy, there was concluded that the world’s largest central banks and widespread debt stimulation have created the model of economic growth. This model was based on the productivity growth. The lack of productivity growth in the developed world, the active integration of developing countries (first of all China and India) in the global economy have...
-
Theory of Rural Architecture - EXAM
e-Learning CoursesThe series of lectures touching upon the history of rural architecture and regarding the composition of landscape designs. The lectures were designed to give students of architecture the tools to work with the nature and strengthen the presence of green spaces in their future designs. The exam is prepared to check what skills and competencies have been gained during the course.
-
Decisional-DNA Based Smart Production Performance Analysis Model
Publicationn order to allocate resources effectively according to the production plan and to reduce disturbances, a framework for smart production performance analysis is proposed in this article. Decisional DNA based knowledge models of engineering objects, processes and factory are developed within the proposed framework. These models are the virtual representation of manufacturing resources, and with help of Internet of Things, are capable...
-
Anna Rzeczycka dr hab.
PeopleAnna Rzeczycka is the deputy head of the Department of Finance at the Faculty of Economics and Management of the Gdańsk University of Technology. Publications are situated in the field of social sciences in the discipline of economics and finance. They include books, monographs, articles, publications and scientific editions of monographs and scientific journals. In terms of numbers, it includes the following items: 12 monographs...
-
Iwona Nowakowska dr
PeopleAssistant Professor at The Maria Grzegorzewska University Institute of Psychology. Graduate of Psychology (University of Warsaw, 2019), and PhD in this field (Maria Grzegorzewska University, 2022). Conducted research in the fields of: social and clinical psychology and individual differences. Her current research activity concentrates on prosociality (volunteering, philanthropy, socially responsible behaviors) and their correlates. She...
-
Włodzimierz Przybylski prof. dr inż.
People -
Computational fluid dynamics - lustres and shadows.
PublicationThe paper is devoted to the different aspects of CFD. The advantages of this concept are evident and obvious; powerfuk and effective tools bring this technology closer to the quantifiable world. However, certain weaknesses in this structure are apparent. Sometimes, a simplistic tendency towards simplifications and facilitations may degenerate and lead to negative behaviours and signs. These have not been serious up to date, but...
-
Integrating environmental issues with the practice of urban planning
PublicationEnvironmental protection of urban areas has become a common concern among academics, policy makers and urban planners. Therefore, environmental issues are often underlined and incorporated into many strategies for urban development. In the article a discussion about the development of the concept of sustainable development in the context of urban planning and international policies is presented, followed by a review of planning...