Filtry
wszystkich: 710
wybranych: 525
Wyniki wyszukiwania dla: MANUFACTURING
-
Effect of plasma nitrided layers on low-alloy steel on its hydrogen degradation
PublikacjaPrzedstawiono badania wpływu warstw azotowanych jarzeniowo na stali 34CrAlNi7-10 na jej podatność na niszczenie wodorowe. Wytworzono warstwy azotowane w atmosferach technologicznych o różnym udziale wodoru. Próbki materiału rodzimego i z warstwami azotowanymi poddano próbie rozciągania z małą prędkością odkształcania w środowisku 0,01 N kwasu siarkowego przy polaryzcaji katodowej. Względny spadek plastyczności i charakter przełomu...
-
Types of wear and tear of biomaterials used in orthopaedic surgery
PublikacjaPurpose of this paper is presentation of observations on different kinds of wear and tear of biomaterials used in contemporary orthopaedic surgery. Types of prosthesis damage, encountered in medical practice, and their causes have been described. Results of many clinical studies were analysed to review prosthesis damage from the stage of implanting (such as intrusion of a foreign object between its components) to their natural...
-
Antimicrobal and ostheointegration activity of bone cement contains nanometals
PublikacjaPurpose: One of the major problems in bone surgery are infections – especially thoseoccurring in the course of the operating on the patients with lowered immunity system,because they carry the danger of complications. In the Mechanical Department of TechnicalUniversity of Gdansk, there has been carried the research with the use of bone cement andmetal nanoparticles.Design/methodology/approach: The bone cement was used without supplement...
-
Evaluation of reformer tubes degradation after long term operation
PublikacjaPurpose of this paper is to show the effect of long-term service at elevated temperatures on microstructural changes of cast steel reformer tubes made of the alloy IN-519 (24%Cr, 24%Ni, Nb). The relationship between mechanical properties and microstructure degradation is discussed. Investigations were performed on five tubes taken from ammonia reformer furnace. Tubes worked at temperature of 880C and 3,2 MPa pressure. The operation...
-
Dissimilar underwater wet welding of HSLA steels
PublikacjaThe high-strength low-alloy S460ML and S460N steels were chosen for underwater wet welding of dissimilar T-joints using covered electrodes. For improving the quality of joints, the temper bead welding (TBW) method was used. The application of TBW in pad welding conditions has been investigated earlier but the possibility of usage of this technique in welded joints was not analyzed. The main aim of the study was to check the influence...
-
Failure of austenitic stainless steel tubes during steam generator operation
PublikacjaThe article presents the failure process of austenitic stainless steels used in power devices, such as heat exchangers, steam generators, in terms of local corrosion: pitting, stress and intergranular corrosion, paying particular attention to welded joints area. The effect of steel chemical composition, microstructure, welding process and work environment was analyzed. The second part of the article presents the results of the...
-
Various approaches to a human preference analysis in a digital signage display design
Publikacja -
The Effect of Cryogenic Treatment on Microstructure and Mechanical Response of AISI D3 Tool Steel Punches
PublikacjaRecently, deep cryogenic treatment is performed to improve the mechanical responses (wear, hardness, fatigue, and thermal conductivity) of various steel components. Researchers have tried to evaluate the eco-friendly and nontoxic process to optimize the parameters. Cold-shearing punches used to manufacture various holes that undergo severe impact loading and wear in the metal forming process. This study concerns the effect of soaking...
-
Corrosion Properties of Dissimilar AA6082/AA6060 Friction Stir Welded Butt Joints in Different NaCl Concentrations
PublikacjaA solid-state friction stir welding method which is increasingly used in the marine and shipbuilding industry, has been developed to produce welds with high mechanical properties. In seawater, the oxide layer of aluminium is attacked by Cl− ions resulting in its disruption and formation of pitting corrosion. It is particularly important to determine the electrochemical properties of the produced welds and to evaluate the efect...
-
Laser Beam as a Precision Tool to Increase Fatigue Resistance in an Eyelet of Undercarriage Drag Strut
PublikacjaThe article contains the results of tests on a laser-processed eyelet of undercarriage drag strut to increase its fatigue strength. Laser processing concentrated on both sides around the hole of eye for connecting the undercarriage drag strut caused that the material in this area withstood more than twice the number of load cycles established for this material. In order to determine the reasons for the increase in fatigue strength,...
-
Storage of High-Strength Steel Flux-Cored Welding Wires in Urbanized Areas
PublikacjaThe condition of the consumables is a key factor determining the waste reduction in the welding processes and the quality of the welded joint. The paper presents the results of tests of four types of fux-cored wires dedicated for welding high-strength steels, stored for 1 month and 6 months in Poland in two urbanized areas: in a large seaside city (Gdańsk) and in Warsaw, located in the center of the country. The wires were subjected...
-
Recent Advances in Development of Waste-Based Polymer Materials: A Review
PublikacjaLimited petroleum sources, suitable law regulations, and higher awareness within society has caused sustainable development of manufacturing and recycling of polymer blends and composites to be gaining increasing attention. This work aims to report recent advances in the manufacturing of environmentally friendly and low-cost polymer materials based on post-production and postconsumer wastes. Sustainable development of three groups...
-
Metrisable assessment of the course of stream‑systemic processes in vector form in industry 4.0
PublikacjaThe goal of this paper is to present an innovative conception how to use metrisable vector structure of a manufacturing process, based on quantitative relations between the activity of input streams, features of the product, and effect of losses; all of which are excellent practical solution for Industry 4.0, and in turn intelligent factories. This solution can be a usefull way in the process of building sustainable organization....
-
Metrisability of managing of stream-systemic processes
PublikacjaTo achieve the planned goal, in order to properly describe the manufacturing system management, six process stream functions were introduced. Non-dimensional flows of these functions in time can be empirically defined during the manufacturing process. They are interpreted as non-dimensional expenses. Maximum values for these functions in properly-managed processes equal one. Also, a global management function was introduced, being...
-
Decisional-DNA-Based Digital Twin Implementation Architecture for Virtual Engineering Objects
PublikacjaDigital twin (DT) is an enabling technology that integrates cyber and physical spaces. It is well-fitted for manufacturing setup since it can support digitalized assets and data analytics for product and process control. Conventional manufacturing setups are still widely used all around the world for the fabrication of large-scale production. This article proposes a general DT implementation architecture for engineering objects/artifacts...
-
Concept of managing quality in baking industry, in vector representation
PublikacjaThe author introduced an innovative metrisable method of describing a manufacturing process. The idea of vector structure of a manufacturing process allows to formulate quantitative relations between the activity of input streams, elements of product quality, and measurable effects of losses. The structure was basis for the formulation of the concept of the process of managing product quality in the baking industry in a vector...
-
Systematic Assessment of Product Quality
PublikacjaThe article describes an innovative metrizable idea for systemic assessments of product quality within the baking industry. Complex product quality analysis requires the employment of metrizability criteria for factors that impact the quality of the product, and these are called determinants. Therefore, such analysis is only possible with the use of systems engineering. A system represents the potential of a manufacturing process,...
-
Applications of Additively Manufactured Tools in Abrasive Machining—A Literature Review
PublikacjaHigh requirements imposed by the competitive industrial environment determine the development directions of applied manufacturing methods. 3D printing technology, also known as additive manufacturing (AM), currently being one of the most dynamically developing production methods, is increasingly used in many different areas of industry. Nowadays, apart from the possibility of making prototypes of future products, AM is also used...
-
Paradygmat informacyjny projektowania systemów wytwórczych nowej generacji
PublikacjaW niniejszym rozdziale pokazano informacyjny paradygmat projektowania i eksploatacji elastycznych systemów produkcyjnych na przykładzie róznych modeli systemów nowej generacji NGMS (Next Generation Manufacturing System). Na bazie modeli BMS (Bionc Manufacturing System)HMS (Holonie Manufacturing System), FFMS (Fraktal Factory Maufacturing System) dokonano analizy porównawczej wybranych rozwiązań w przedmiotowym obszarze, formułując...
-
Water sorption and blistering of GFRP laminates with varying structures
PublikacjaThe microstructures, water absorption as well as blistering was studied for bi- and tri- axial glass fibre vinyl ester and polyester -matrix laminates coated with gel coat layer and uncoated. The effect of manufacturing technique on water sorption characteristics was considered. It was found that water sorption characteristics of GFRP depend on manufacturing methods. The least water intake was found for specimens having perfect...
-
Designing Intelligent Factory: Conceptual Framework and Empirical Validation
PublikacjaThis paper presents a framework for monitoring, analysing and decision making for a smart manufacturing environment. We maintain that this approach could play a vital role in developing an architecture and implementation of Industry 4.0. The proposed model has features like experience based knowledge representation and semantic analysis of engineering objects and manufacturing process. It is also capable of continuous real time...
-
Virtual Engineering Factory: Creating Experience Base for Industry 4.0
PublikacjaABSTRACT In recent times, traditional manufacturing is upgrading and adopting Industry 4.0, which supports computerization of manufacturing by round-the-clock connection and communica- tion of engineering objects. Consequently, Decisional DNA- based knowledge representation of manufacturing objects, processes, and system is achieved by virtual engineering objects (VEO), virtual engineering processes (VEP), and virtual engineering...
-
Smart Virtual Product Development (SVPD): Experience Based Product Development System for Industry 4.0
PublikacjaThis chapter presents the concept of smart virtual product development (SVPD) system capable of supporting industrial product development. It enhances the decision making process during various activities involved in product development i.e. product design, manufacturing, and inspection planning. This is achieved by using the explicit knowledge of past formal decision events, which are captured, stored, and recalled in the form...
-
STRATEGIA DOBORU PROCESU PRODUKCYJNEGO WG. REAKCJI NA ZAMÓWIENIA KLIENTA
PublikacjaW opracowaniu poruszono zagadnienie doboru strategii wytwarzania w zakresie procesu produkcyjnego. W ramach tego zagadnienia dokonano podziału procesów produkcyjnych wg różnych kryteriów. Skupiano się na podziale procesów wg. reakcji na zamówienia klienta. Przedstawiono pokrótce najistotniejsze cechy charakteryzujące tego typu procesy. By móc określić strategię w zakresie procesu produkcyjnego zestawiono kryteria wyboru procesu...
-
Global value chains and productivity gains: a cross-country analysis
PublikacjaThe main aim of this article is to assess the implications of involvement in global value chains (GVC) on sectoral productivity growth from the international perspective. Our panel data analysis covers 40 countries, 20 industries (13 manufacturing and 7 services sectors) in the period 1995–2011. Estimation results suggest that there is a positive link between TFP growth and the involvement of sectors in global value chains (measured...
-
Wire Arc Additive Manufactured Mild Steel and Austenitic Stainless Steel Components: Microstructure, Mechanical Properties and Residual Stresses
PublikacjaWire arc additive manufacturing (WAAM) is an additive manufacturing process based on the arc welding process in which wire is melted by an electric arc and deposited layer by layer. Due to the cost and rate benefits over powder-based additive manufacturing technologies and other alternative heat sources such as laser and electron beams, the process is currently receiving much attention in the industrial production sector. The gas...
-
Community of Practice for Product Innovation Towards the Establishment of Industry 4.0
PublikacjaThe aim of this paper is to present the necessity of formulating the Community of Practice for Product Innovation process based on Cyber-Physical Production Systems towards the establishment of Industry 4.0. At this developing phase of Industry 4.0, there is a need to define a clear and more realistic approach for implementation process of Cyber-Physical Production Systems in manufacturing industries. Today Knowledge Management...
-
3D Printing of Metallic Implants
PublikacjaThe fabrication of various elements, solid and open porous structures of stainless steel and Ti alloy is described. The process was started with the design of 3D models in CAD/CAM system. The 3D models were transformed into *.stl files and then the manufacturing process of the real structures by means of the selective laser melting with the SLM Realizer 100 3D printer was made. The paper shows the porous specimens made for possible...
-
Międzynarodowa konkurencyjność produkcji przemysłowej krajów UE 15 w świetle wybranych metod analizy przestrzennej
PublikacjaPublikacja ma na celu zweryfikowanie hipotezy o istotno¬ści zależności przestrzennych w badaniach międzynarodowej konkurencyjności produkcji. Choć to sekcja produkcji przemysłowej w krajach UE 15 charakteryzuje się dość niskim stopniem koncentracji przestrzennej, to jednak widoczne są istotne statystycznie zależności o charakterze autokorelacji przestrzennej, tj. zauważalna jest tendencja do skupiania się w sąsiedztwie krajów UE...
-
MATERIAŁY I ELEMENTY STOSOWANE DO WYKONANIA LEKKIEJ OBUDOWY cz. 1. Materiały metalowe
PublikacjaW artykule przedstawiono stosowane w lekkich obudowach materiały metalowe i kształtowane z nich wyroby. Omówiono charakterystyczne parametry i różnice technologiczne występujące w produkcji wyrobów. Przedstawiono ocenę odporności korozyjnej materiałów.
-
BASICS OF THE MANAGEMENT SYSTEM FOR TRANSFORMATIONS OF PRODUCTION PLANNING AND CONTROL PROCESSES
PublikacjaIntensive development of technologies, in particular of the spinotronics, nanotechnology, robotics, and ICT, shapes the new generation production systems. Their distinctive feature is the flexi-bility associated with production intelligence. It is required from all processes, including the production planning and control processes (PPCP). The article is of conceptual character. It was prepared based on literature research. It encompasses...
-
Wage response to global production links: evidence for workers from 28 European countries (2005–2014)
PublikacjaUsing rich individual-level data on workers from 28 European countries, this study provides the first so extensive cross-country assessment of wage response to global production links within GVC in the period 2005–2014. Unlike the other studies, the authors (i) address the importance of backward linkages in globally integrated production structures (capturing imports of goods and services needed in any stage of the production of...
-
Przydział narzędzi obróbkowych a efektywność szeregowania zadań produkcyjnych
PublikacjaThe paper addresses issues concerning the analysis of tool flow within a multi-machine machining cell, designated to small batch manufacturing a definite spectrum of prismatic parts. The approach utilises a method for job and tool allocation to work centres with limited number of machines and capacity of tool resources, based on the analysis of formalised relations: job - tool sets required. Selected allocation strategies are considered...
-
Virtual Engineering Objects: Effective Way of Knowledge Representation and Decision Making
PublikacjaThis paper presents a knowledge representation case study by constructing Decisional DNA of engineering objects. Decisional DNA, as a knowledge representation structure not only offers great possibilities on gathering explicit knowledge of formal decision events but also it is a powerful tool for decision-making process. The concept of Virtual engineering Object (VEO), which is a knowledge and experience representation of engineering...
-
Materiały szklane w lekkiej obudowie. cz. 3. Cechy techniczne i użytkowe szyb
PublikacjaOmówiono wyroby ze szkła budowlanego i wymagania jekie muszą spełniać zanim zostaną użyte w obiektach budowlanych, szczególnie w zakresie tworzenia szklano-metalowych fasad współczesnych budynków wysokościowych jak i halowych.
-
Materiały i elementy stosowane do wykonania lekkiej obudowy. Cz. 2. Materiały ze szkła budowlanego
PublikacjaW artykule przedstawiono stosowane w lekkich obudowach materiały szklane i kształtowane z nich wyroby. Omówiono charakterystyczne parametry i różnice technologiczne występujące w produkcji wyrobów szklanych przeziernych. Przedstawiono parametry definiujące właściwości przegród wykonanych ze szkła.
-
What fosters firm-level labour productivity in Eastern European and Central Asian countries?
PublikacjaThis study examines labour productivity performance and its determinants in Eastern European and Central Asian (EECA) firms using micro-level data. We find significant differences in labour productivity among members of the European Union in Eastern Europe and other Eastern European and Central Asian countries. We also confirm the important impact of foreign ownership, exporter status, and highly skilled workers on productivity...
-
Prosthetic Elements Made of the Ti-13Zr-13Nb Alloy by Selective Laser Melting
PublikacjaThe fabrication of the prosthetic foundations and bridges from the Ti-13Zr-13Nb alloy is described. The process was started from CAD/CAM design of 3D models of the foundations based on scanning of patient`s mouth. Next, 3D models were transformed into *.stl files for the manufacturing stage and then the manufacturing process by means of the selective laser melting with the SLM Realizer 100 equipment was made. The intrinsic structure...
-
DETERMINANTY WZROSTU POLSKIEGO EKSPORTU PRZEMYSŁU PRZETWÓRCZEGO – ANALIZA DŁUGOOKRESOWA
PublikacjaGłównym celem artykułu było określenie determinant eksportu polskiego przemysłu przetwórczego na podstawie danych pochodzących z 13 podsekcji przetwórstwa przemysłowego wyodrębnionych zgodnie z NACE 1.1. Analiza z wykorzystaniem modelu ECM objęła lata 1995–2011 i została przeprowadzona dwutorowo – dla całej sekcji przemysłu przetwórczego oraz dla poszczególnych jego podsekcji. Autorki zbadały, jak popyt zagraniczny, popyt krajowy,...
-
Establishing intelligent enterprise through community of practice for product innovation
PublikacjaThis paper presents the idea of implementing the virtual Community of Practice for Product Innovation processes towards the establishment of intelligent enterprise. Since the fourth industrial revolution is passing through the developing phase, implementation of Cyber-Physical Production Systems require more realistic approach. Knowledge Management and Engineering plays an important role in manufacturing industries facing global...
-
Implementing Virtual Engineering Objects (VEO) with the Set of Experience Knowledge Structure (SOEKS)
PublikacjaThis paper illustrates the idea of Virtual Engineering Object (VEO) powered by Set of Experience Knowledge Structure (SOEKS) and Decisional DNA (DDNA). A VEO is the knowledge representation of an engineering object, having embodiment of all its associated knowledge and experience within it. Moreover, VEO is a specialization of Cyber-Physical System (CPS) in terms of that its extension in knowledge gathering and reuse, whereas CPS...
-
Polyurethanes
PublikacjaThe chapter content is devoted to Polyurethanes and consists of the following items: general characteristics of polyurethanes, raw materials used in the synthesis of crosslinked polyurethanes, synthesis and crosslinking reactions of polyurethanes, morphology of liniear and branched PU, manufacturing methods and functional properties.
-
Decisional-DNA Based Smart Production Performance Analysis Model
Publikacjan order to allocate resources effectively according to the production plan and to reduce disturbances, a framework for smart production performance analysis is proposed in this article. Decisional DNA based knowledge models of engineering objects, processes and factory are developed within the proposed framework. These models are the virtual representation of manufacturing resources, and with help of Internet of Things, are capable...
-
Analysis and evaluation of grouping methods for effective cutting tool operation
PublikacjaThis article presents the possibilities for using cluster analysis in the assignment of machine tools in automated manufacturing systems. Based on the similarity of manufacturing processes in the system, cutting tools have been grouped. The objective was to obtain groups of similar objects, which could potentially ensure the reduction of the frequency and time of setups, optimizing the maintenance of tool resources and improving...
-
Smart Virtual Product Development (SVPD) System to Support Product Inspection Planning in Industry 4.0
PublikacjaThis paper presents the idea of supporting product inspection planning process during the early stages of product life cycle for the experts working on product development. Aim of this research is to assist a collaborative product development process by using Smart Virtual Product Development (SVPD) system, which is based on Set of Experience Knowledge Structure (SOEKS) and Decisional DNA (DDNA). The proposed system is developed...
-
Cooperative control in production and logistics
PublikacjaClassical applications of control engineering and information and communication technology (ICT) in production and logistics are often done in a rigid, centralized and hierarchical way. These inflexible approaches are typically not able to cope with the complexities of the manufacturing environment, such as the instabilities, uncertainties and abrupt changes caused by internal and external disturbances, or a large number and variety...
-
PU Polymers, Their Composites, and Nanocomposites: State of the Art and New Challenges
PublikacjaThe chapter is a review of the polyurethane(PU)-based composites and nanocomposites. The chapter details different components in the manufacturing of PU polymers, composites, and nanocomposites. The different types of glycols, isocyanates, and catalysts that are used for the synthesis of different polyurethanes are discussed. The applications and specialties of polyurethane composites and nanocomposites are also elaborated on.
-
Does offshoring affect industry employment? Evidence from a wide European panel countries
Publikacjais paper contributes to the literature on the possible impact of international outsourcing on domestic labour markets. We focus on off shoring-employment relationship. Th e analysis is performed for a wide European panel, composed of 27 EU countries and 13 manufacturing sectors, observed in the period 1995-2009. Th anks to the use of input-output tables from the WIOD project, we measure the intensity of off shoring in the sectors,...
-
Process layout planning and optimised product range selection in manufacture of wooden construction sets
PublikacjaThis paper introduces a systematic deterministic framework for planning and the analysis of facility layouts aimed at manufacturing a variety of parts, as components of specific end products. The essence of the proposed approach lies in the decomposition of a traditional job-shop into layout modules of generic material flow patterns, that inherently yields improved efficiency of the entire system. It entails the use of a relevant...
-
Microjet technology as a perspective intensification method for high performance heat exchangers
PublikacjaIn the paper two oryginal designs of compact heat exchangers with intensification effect produced by microjets are presented. The technology of microjets manufacturing is an "inhouse" patented design. The idea of such heat exchanger is shown together with the flow and thermal characteristics of the prototypes. The results of performer measurements are satisfactory and encourage for further research of the original designs.
-
Analiza zgodności wybranych sieci współpracy z definicyjnymi wyznacznikami klastra
PublikacjaCelem artykułu jest analiza wyróżnionych form współpracy, tj. inicjatyw klastrowych, grup producentów rolnych, parków technologicznych i naukowych oraz sieci opartych na systemach produkcji szczupłej (z ang. Lean Manufacturing) pod kątem ich zgodności z definicyjnymi wyznacznikami klastra.
-
Anisotropy and compaction gradient assessment on rammed earth specimens through sonic tomography approach
PublikacjaRammed earth is a traditional construction technique that has recently gained attention because of its benefits from an ecological perspective. The conservation of the existing valuable cultural heritage sites and the quality control of new constructions built with this material require the development and application of practical inspection techniques. This paper explores the application of sonic tests and sonic tomography as...
-
Novel Cold Crucible Ultrasonic Atomization Powder Production Method for 3D Printing
Publikacja: A new powder production method has been developed to speed up the search for novel alloys for additive manufacturing. The technique involves an ultrasonically agitated cold crucible installed at the top of a 20 kHz ultrasonic sonotrode. The material is melted with an electric arc and undergoes pulverization with standing wave vibrations. Several different alloys in various forms, including noble and metallic glass alloys, were...
-
Analysis of the Possibilities of Applying 3D Print Methods for the Needs of Ship-Building Industry
PublikacjaArticle presents the analysis of applying additive and hybrid manufacturing methods and its impact on dynamic stiffness of prepared samples. Dynamic analysis of the handle bracket specimens consisted in plotting the resonance curves and using these curves to estimate the dynamic stiffness of elements produced with additive manufacturing technology. Authors focused especially on 3D print in Fused Deposiotion Modeling/Fused Filament...
-
Arabinoxylans: A review on protocols for their recovery, functionalities and roles in food formulations
PublikacjaArabinoxylans (AXs) are compounds with high nutritional value and applicability, including prebiotics or supplementary ingredients, in food manufacturing industries. Unfortunately, the recovery of AXs may require advanced separation and integrated strategies. Here, an analysis of the emerging techniques to extract AXs from cereals and their by-products is discussed. This review covers distinct methods implemented over the last...
-
The effects of offshoring to low-wage countries on domestic wages: a worldwide industrial analysis
PublikacjaThis paper extends the literature on the implications of offshoring for labour markets by investigating its effect on the wages of different skill groups in a broad global context. The analysis draws on input–output data from the WIOD project, and in the panel analysed (13 manufacturing industries, 40 countries, 1995–2009) we account for up to 96 % of the international trade in manufacturing inputs. Being particularly interested...
-
Wsparcie informatyczne koncepcji Lean Management oraz Six Sigma
PublikacjaW rozdziale tym przedstawiono kluczowe aspekty integracji dwóch najważniejszych obecnie koncepcji optymalizacji procesów w organizacjach produkujących wyroby materialne oraz świadczących usługi – Six Sigma i Lean Manufacturing. Szczególną uwagę zwrócono na uwarunkowania wsparcia informatycznego tych koncepcji w mniejszych organizacjach.
-
Biopolyols obtained via crude glycerol-based liquefaction of cellulose: their structural, rheological and thermal characterization
PublikacjaIn this work lignocellulose biomass liquefaction was used to produce biopolyols suitable for the manufacturing of rigid polyurethane foams. In order to better evaluate the mechanism of the process, pure cellulose was applied as a raw material. The effect of time and temperature on the effectiveness of liquefaction and the parameters of resulting biopolyols were characterized. The prepared materials were analyzed in terms of their...
-
Analysis of the construction, assembly and usage of specialized fixtures illustrated with an example of machining a lever
PublikacjaThe paper presents a method of quantitative assessment of manufacturability of the construction of specialized fixtures used in machining. The assumed, simplified assessment criteria include both the complexity of the construction with respect to time-consumption of manufacturing the components and their assembly, as well as the features of the usage of fixtures. The paper contains a study case connected with variably designed...
-
Possibilities for assesment of the angular distortion in Welded T-joint
PublikacjaSpawanie jest podstawową techniką łączenia elementów konstrukcji kadłuba statku. Procesowi temu towarzyszą odkształcenia spawalnicze, co przysparza dużo problemów wykonawczych. W pracy przedstawiono wpływ przewymiarowania spoiny pachwinowej na wielkość kątowych odkształceń złącza. Dokonano porównania wartości określonych na podstawie inżynierskich hipotez z wynikami otrzymanymi podczas prób laboratoryjnych.
-
Reliable renewable energy – application of electrochemical capacitors for electrical energy storage
PublikacjaThis paper presents electrical energy storage devices such as electrochemical capacitors, their principle of operation and electrode materials most commonly used in their manufacturing technology. Moreover, our research on development of new nanocomposite materials based on multi-walled carbon nanotubes and conducting polymer is shown. Additionally, the possibility and advantages of application of supercapacitors for accumulation...
-
Workbook for cooperative development of personnell and organisation for innovation in SME in the Baltic Sea Region
PublikacjaThis study highlights the potential for cooperative development of personnel and organisational innovations in SMEs and gives an example implemented by the University of Lund together with the Municipality of Astorp and local companies. This innovation field is of particular importance for all companies in the region, since it does apply to any professional sector, be it a service oriented company or a manufacturing business. This...
-
A Pilot Study on Machining Difficult-to-Cut Materials with the Use of Tools Fabricated by SLS Technology
PublikacjaThe growing use of contemporary materials in various industrial sectors, such as aerospace, automotive, as well as the oil and gas industry, requires appropriate machining methods and tools. Currently, apart from the necessity to obtain high-dimensional and shape accuracy, the efficiency and economic aspects of the selected manufacturing process are equally important, especially when difficult-to-cut materials, such as hard and...
-
Experience-Based Product Inspection Planning for Industry 4.0
PublikacjaIn this paper we describe how our Smart Virtual Product Development (SVPD) system can be used to enhance product inspection planning. The SVPD system is comprised of three main modules, these being the design knowledge management (DKM) module, the manufacturing capability and process planning (MCAPP) module, and the product inspection planning (PIP) module. Experiential knowledge relating to formal decisional events is collected,...
-
Composite as a Material of the Future in the Era of Green Deal Implementation Strategies
PublikacjaComposite materials have become synonymous with modernity, desired in nearly every aspect of our daily lives, from simple everyday objects to sanitary facilities, pipelines, the construction of modern sewer networks, their renovation, water supply, and storage reservoirs, to complex structures—automotive, planes, and space science. Composites have seen a considerable rise in attention owing to their characteristics, durability,...
-
Evaluating Industry 4.0 Implementation Challenges Using Interpretive Structural Modeling and Fuzzy Analytic Hierarchy Process
PublikacjaThe fourth industrial revolution known as Industry 4.0 is reshaping and evolving the way industries produce products and individuals live and work therefore, gaining massive attraction from academia, business and politics. The manufacturing industries are optimistic regarding the opportunities Industry 4.0 may offer such as, improved efficiency, productivity and customization. The present research contributes to the Industry 4.0...
-
Multi-criteria Robot Selection Problem for an Automated Single-Sided Lapping System
PublikacjaFlat lapping is a crucial process in a number of precision manufacturing technologies. Its aim is to achieve extremely high flatness of the workpiece. Single-sided lapping machines have usually standard kinematic systems and are used in conjunction with conditioning rings, which are set properly be-tween the center and the periphery of the lapping plate. In this paper, instead of conventional single-side lapping machine, an automated...
-
Prediction of Weld Deformations by Numerical Methods - Review
PublikacjaThe welding process is the basic technique of joining in the shipbuilding industry. This method generates welding distortions that cause a lot of problems during the manufacturing process due to both the time and cost of straightening as well as their influence on later stages of production. Proper preparation of welding processes plays a growing role in the shipbuilding industry and the development of calculating tools is being...
-
Współczesne metody zapewniania jakości oprogramowania. Od klasyki do zwinności
PublikacjaKsiążka opisuje problematykę jakości w kontekście metod wytwarzania oprogramowania. Składa się z 22 rozdziałów podzielonych na 6 części: Znaczenie jakości oprogramowania, Podstawowe pojęcia i problemy jakości, Jakość w ujęciu klasycznym, Pomiary jakości, Dokumentacja i normy jakości procesu, Jakość w podejściu zwinnym. Zebrany materiał pokazuje ewolucję podejścia do jakości w klasycznych metodykach wytwarzania (od modelu kaskadowego...
-
Problems of Determination of Welding Angular Distortions of T-fillet Joints in Ship Hull Structures
PublikacjaShip hull structure elements are in majority joined by welding. Welding distortions can cause a lot of problems during the manufacturing process. In the literature it is proposed wide spectrum of suggestions for a correct estimation of welding deformation in particular angular deformation in the fillet welded T joint. In the work verification of selected methods is proposed basing upon of the results of the laboratory measurements....
-
Recycling of Photovoltaic Solar Cells and Modules - Te State - Of - Art
PublikacjaIn comparison to other energy producing techniques, photovoltaics (PV) is one of the most promising options: no emission of any matter into the environment during operation; extremely long operation period (estimated average: 25 years), minimum maintenance, robust technique, aesthetic aspects. The use of photovoltaics is rapidly increasing, and the respective market is developing accordingly. Although PV manufacturing equipment...
-
The use of LiFePO4 technology in autonomous PV systems
PublikacjaBattery manufacturing based on the flow of lithium ions is currently the fastest growing and the most promising technology. It is used in many applications - from the smallest electronic devices to the large-scale energy trays. However, in the PV systems lead-acid batteries are still the most commonly used. As they are much cheaper they also come with a number of significant disadvantages. It is anticipated that they will be replaced...
-
CURRENT TRENDS IN RECYCLING OF PHOTOVOLTAIC SOLAR CELLS AND MODULES WASTE
PublikacjaIn comparison to other energy producing techniques, photovoltaics (PV) is one of the most promising options: no emission of any matter into the environment during operation; extremely long operation period (estimated average: 25 years), minimum maintenance, robust technique, aesthetic aspects. The use of photovoltaics is rapidly increasing, and the respective market is developing accordingly. Although PV manufacturing equipment...
-
A Semiautomatic Experience-Based Tool for Solving Product Innovation Problem
PublikacjaIn this paper we present the idea of Smart Innovation Engineering (SIE) System and its implementation methodology. The SIE system is semi-automatic system that helps in carrying the process of product innovation. It collects the experiential knowledge from the formal decisional events. This experiential knowledge is collected from the group of similar products having some common functions and features. The SIE system behaves like...
-
The Indonesian economy in 2005: An analysis using the input-output approach
PublikacjaThis study aims to analyze the economic conditions of Indonesia in 2005. This study employs Input-Output (IO) analysis as an analysis instrument. The data of this study is the Indonesian IO table for 2005. Thus, the Indonesian economy is represented by Indonesian industrial sectors mentioned in the data. There are nine industries used in the present study, namely (1) agriculture, livestock, forestry, and fishery, (2) mining and...
-
Improvement of microstructure and mechanical properties of high dense sic ceramics manufactured by high-speed hot pressing
PublikacjaNon-oxide ceramics possess high physical-mechanical properties, corrosion and radiation resistance, which can be used as a protective materials for radioactive wastes disposal. The aim of the present study was the manufacturing of high density SiC ceramics with advanced physical and mechanical parameters. The high performance on the properties of produced ceramics was determined by the dense and monolithic structure. The densified...
-
Experimental Designs of Mass Customized Passive Single-family Houses - Prospects and Limitations
PublikacjaAbstract The article deals with case studies of selected architectural designs of the past fifteen years the authors of which intended to rethink both the typology and the means of constructing single family houses. The analysis covers contemporary design issues such as variation, curvilinearity, customization, digital manufacturing and ecological concerns. The purpose behind the research was to establish in what way new design...
-
METODY DOSKONALENIA SYSTEMU ZARZĄDZANIA ŚRODOWISKOWGO ISO14001 W PRZEDSIĘBIORSTWACH PRODUKCYJNYCH
PublikacjaOpracowanie ma na celu przedstawienie problematyki doskonalenia zarządzania środowiskowego w przedsiębiorstwach produkcyjnych. W opracowaniu przedstawiono główne wymagania w obszarze doskonalenia systemu zarządzania środowiskowego zgodnego z wymaganiami ISO14001. Zaprezentowano wybrane metody oraz mechanizmy doskonalenia systemów zarządzania środowiskowego ISO14001 stosowane w praktyce. Dokonano prezentacji autorskiej metody doskonalenia...
-
Selected aspects of logistics management of the production process in an enterprise
PublikacjaThe following article presents selected aspects of management of production logistics process in enterprise. Companies treat this part of business as a way to empower market position. In the first part author explained the idea of process. The next part describes the definition of logistics production management, which is crucial for manufacturing enterprises. However, author described lots of tools related to production management...
-
Zastosowanie technologii holonowych w środowisku chmurowym przedsiębiorstwa
PublikacjaCelem artykułu jest wskazanie możliwości stosowania technologii holonowych dla implementacji chmurowego przetwarzania danych (cloud computing, CC) oraz chmurowego wytwarzania (cloud manufacturing, CM) w przedsiębiorstwie wirtualnym. Przyjęto następujący schemat wywodu: wyszczególnienie cech wspólnych oraz wyróżniających, występujących pomiędzy chmurą obliczeniową a wytwarzaniem chmurowym przedsiębiorstwa wirtualnego, a następnie...
-
Wybrane aspekty oceny satysfakcji i lojalności klientów i pracowników
PublikacjaCelem artykułu jest przedstawienie propozycji oryginalnego modelu pozwalającego lepiej zrozumieć mechanizmy kształtowania się satysfakcji i lojalności klientów i pracowników oraz umożliwiającego porównywanie satysfakcji klientów różnych przedsiębiorstw w oderwaniu od ich specyfiki branżowej. Zaprezentowany model opiera się na mechanizmach przyczynowo-skutkowych i pozwala na stawianie kwantyfikowalnych celów, dając w rezultacie...
-
Monitoring of single-side lap grinding with electroplated tools
PublikacjaThe results presented in the paper show that utilising microphones as audible sound sensors is a suitable approach for monitoring a single-side lap grinding process due to the low levels of noise generated by the drives of a machine tool. The results confirm that sound signal analysis is a feasible and relatively simple method to monitor a lap grinding process with the use of an audible sound sensor. Proposed method can be used...
-
A High-Efficient Low-Voltage Rectifier for CMOS Technology
PublikacjaA new configuration of rectifier suiting CMOS technology is presented. The rectifier consists of only two nchannel MOS transistors, two capacitors and two resistors; for this reason it is very favourable in manufacturing in CMOS technology. With these features the rectifier is easy to design and cheap in production. Despite its simplicity, the rectifier has relatively good characteristics, the voltage and power efficiency, and...
-
Influence of the laser remelting parameters on the thickness of surface layers created on the stainless steel X5CrNi18-10
PublikacjaIn this work the surface of austenitic stainless steel type X5CrNi18-10 was treated by using laser. Laser remelting was done by means of laser MLT 2500 CO2 with different parameters of treatment: P - power beam (800 [W], 1000 [W], 1100 [W], 1200 [W]); v - scanning velocity (6 [mm/s], 7 [mm/s], 8 [mm/s]); diameter of laser beam (1.4 [mm], 1.6 [mm]). The influence of these parameters on the thickness and shape of layers in manufacturing...
-
Multi-Criterial Design of Antennas with Tolerance Analysis Using Response-Feature Predictors
PublikacjaImperfect manufacturing is one of the factors affecting the performance of antenna systems. It is particularly important when design specifications are strict and leave a minimum leeway for a degradation caused by geometry or material parameter deviations from their nominal values. At the same time, conventional antenna design procedures routinely neglect to take the fabrication tolerances into account, which is mainly a result...
-
Recent Advances in Loop Heat Pipes with Flat Evaporator
PublikacjaThe focus of this review is to present the current advances in Loop Heat Pipes (LHP) with flat evaporators, which address the current challenges to the wide implementation of the technology. A recent advance in LHP is the design of flat-shaped evaporators, which is better suited to the geometry of discretely mounted electronics components (microprocessors) and therefore negate the need for an additional transfer surface (saddle)...
-
Selected Aspects of 3D Printing for Emergency Replacement of Structural Elements
PublikacjaThe paper presents a synthetic characterization of modern methods of manufacturing or regenerating machine elements. Considered methods are machining and additive methods, in particular 3D printing in the FDM/FFF technique. For the study, the authors made samples of the holder bracket using selected methods. Samples made by machining operations, 3D printing with various filling were tested. The paper contains a technical and economic...
-
Reduction in Errors in Roughness Evaluation with an Accurate Definition of the S-L Surface
PublikacjaCharacterization of surface topography, roughly divided into measurement and data analysis, can be valuable in the process of validation of the tribological performance of machined parts. Surface topography, especially the roughness, can respond straightly to the machining process and, in some cases, is defined as a fingerprint of the manufacturing. When considering the high precision of surface topography studies, the definition...
-
Green and Sustainable Membranes: A review
PublikacjaMembranes are ubiquitous tools for modern water treatment technology that critically eliminate hazardous materials such as organic, inorganic, heavy metals, and biomedical pollutants. Nowadays, nano-membranes are of particular interest for myriad applications such as water treatment, desalination, ion exchange, ion concentration control, and several kinds of biomedical applications. However, this state-of-the-art technology suffers...
-
Rotational Molding of Linear Low-Density Polyethylene Composites Filled with Wheat Bran
PublikacjaApplication of lignocellulosic fillers in the manufacturing of wood polymer composites (WPCs) is a very popular trend of research, however it is still rarely observed in the case of rotational molding. The present study aimed to analyze the impact of wheat bran content (from 2.5 wt.% to 20 wt.%) on the performance of rotationally-molded composites based on a linear low-density polyethylene (LLDPE) matrix. Microscopic structure...
-
Wykorzystanie narzędzi pracy zdalnej w działaniach Koła Naukowego Konstruktorów Pojazdów
PublikacjaNiniejszy artykuł stanowi opis działalności Koła Naukowego Konstruktorów Pojazdów, w którego działaniach wykorzystywane są nowoczesne narzędzia pracy zdalnej. Dzięki takiemu podejściu, możliwe staje się wyeliminowanie niedogodnień, z którymi borykano się stosując standardowe, starsze podejście do realizacji zadań projektowych w jednostkach badawczo-rozwojowych. Podane przykłady ilustrują, w jaki sposób powszechny obecnie dostęp...
-
Nietechnologiczne nie znaczy gorsze. Rzecz o innowacjach
PublikacjaInnowacje nietechnologiczne nie zajmują istotnego miejsca w dyskursie naukowym jak i praktycznym. Zauważona luka badawcza oraz brak praktycznych rozwiązań wspierających innowacje nietechnologicznie, były motywem podjęcia tego tematu przez międzynarodowy zespół, składający się z badaczy z czterech krajów (Danii, Finlandii, Litwy i Polski) oraz szeregu instytucji wspierających biznes, w tych krajach, pełniących funkcje pośredników...
-
Quality 5.0: A Paradigm Shift Towards Proactive Quality Control in Industry 5.0
PublikacjaIndustry 5.0, the latest wave of industrial revolution, is redefining the traditional manufacturing and production landscapes by leveraging advanced technologies, promoting sustainability, and fostering a human-centric approach. An inevitable consequence of this progression is Quality 5.0, the next phase of quality control and assurance. Quality 5.0 aims to transcend the limitations of conventional quality control techniques, which...
-
CEE Trade in Services: Value-Added Versus Gross Terms Approaches
PublikacjaThis article assesses the impact of the determinants of service exports in both value-added terms and gross terms for seven Central Eastern European economies in 1995–2011. The results confirm the importance of increasing labor productivity and highly skilled and medium-skilled workers in the growth of trade in services. Exports of services are also supported by linkages between domestic services, especially business services,...
-
Issues of Measuring the Course of Batch Production Processes
PublikacjaIn order to meet demands induced by development of manufacturing processes and production systems, new criteria and indicators that would allow a multiple aspect and realistic rating of batch production process courses are necessary. The objective of this paper is to present the correlation between production processes measurement, its rating and production control, basing on case study analysis from production enterprise. A new...
-
Elements of six sigma methodoloygy in polish smes. the pomeranian region context
PublikacjaIn this article, it has been suggested that the effectiveness of the design and implementation of the process approach in the SMEs sector affects the effectiveness and efficiency of the application of elements of the Six Sigma ™ concept. The selected results of the research have been presented to answer the question to what extent small and medium-sized manufacturing, service and production - service companies in Pomeranian region...
-
THE MELT FLOWABILITY AND TENSILE PERFORMANCE OF POLY (-CAPROLACTONE)/BREWERS’ SPENT GRAIN COMPOSITES AS A FUNCTION OF FILLER MODIFICATION
PublikacjaNowadays, it is essential to reduce the environmental impact of products and technologies. Such an approach should be highlighted in all research activities. In the case of polymer composites, it can be realized by introducing by-products or waste materials as fillers. An auspicious example of such material is the brewers’ spent grain, the major byproduct of the beer production. Its chemical composition, relatively similar to conventional...
-
Determinants of the surface quality, density and dimensional correctness in selective laser melting of the Ti-13Zr-13Nb alloy
PublikacjaSelective laser melting is widely used for custom-designed elements. Successful manufacturing depends on laser treatment parameters and material features. This research aimed to determine the effects of laser power, scan time and hatch distance on surface quality, relative density and dimensional precision for cuboids made of the Ti-13Zr-13Nb alloy. The influence of energy density, energy flux and pre-heating was seen to be decisive...
-
Ocena zastosowania wybranych reguł wymiany narzędzi w systemie produkcyjnym
PublikacjaIn this paper, an integrated analytical and simulation modelling framework has been developed with the objective to explore total system planning and operational issues. It enables in particular structuring the alternative process flow in manufacturing systems and their extended investigation under different tool exchange rules with limited number of tool inventory. Simulation studies performed with the proposed rules in the environment...
-
Decisional DNA based framework for representing Virtual Engineering Objects
PublikacjaIn this paper, we propose a frame-work to represent the Virtual Engineering Objects (VEO) utilizing Set of Knowledge Experience Structure (SOEKS) and Decisional DNA. A VEO will enable the discovery of new knowledge in a manufacturing unit and the generation of new rules that drive reasoning. The proposed VEO framework will not only be knowledge based representation but it will also have its associated experience embedded within...