Filtry
wszystkich: 363
Wyniki wyszukiwania dla: STEEL CONNECTION
-
Categorization of Cloud Workload Types with Clustering
PublikacjaThe paper presents a new classification schema of IaaS cloud workloads types, based on the functional characteristics. We show the results of an experiment of automatic categorization performed with different benchmarks that represent particular workload types. Monitoring of resource utilization allowed us to construct workload models that can be processed with machine learning algorithms. The direct connection between the functional...
-
Performance of ASON/GMPLS architecture in condition of wavelength conversion and without wavelength conversion
PublikacjaThe paper regards the problem of ASON/GMPLS performance in condition of wavelength and without wavelength conversion. The authors present influence analysis in condition of wavelength and non-wavelength conversion on the ASON/GMPLS control plane performance represented by mean Connection Set-up Time E (CST) and request loss probabilities. The offered traffic to the transport layer and request intensity have been changed for evaluation...
-
FE analysis of support-specimen interaction of compressive experimental test
PublikacjaThe objective of this work is to investigate the support-specimen interaction during the compressive experimental testing of stiffened plates. The interaction is analyzed employing the nonlinear Finite Element Method using the commercial software ANSYS. The connection between the stiffened plate and testing supports is modelled with the use of contact elements, where several possible interaction scenarios are investigated, and...
-
Jahn-Teller and related conical intersections in the benzene radical cation and the monofluoro derivate
PublikacjaThe multi-state multi-mode vibronic interactions in the benzene radical cation and its monofluoro derivative have been investigated theoretically, based on high-level electronic structure calculations for the system parameters and a quantum treatment of the nuclear motion. The available experimental data are well reproduced. The interplay of different vibronic coupling mechanisms is pointed out leading to multiple nonadiabatic...
-
The Finite Elements Method application to assesment the impact of turbulence generated by wind turbines on their lacation inclose proximity of overhead high voltage power transmissionlines
PublikacjaThe paper presents selected aspects of construction of wind turbines location concerning aerodynamic impact on power lines. Reaserch is based on the source data concerning the aerodynamic impact of a wind farm consisting of 8 turbines and 400 kV power line, an analysis of the possibility of wind farm locating in the immediate vicinity of the line was carried out. There are serious problems with locating higher capacity wind farms...
-
Unités phraséologiques au pays de la traduction: transfert des collocations nomino-adjectivales avec le lexème «femme» dans la traduction de la littérature houellebecquienne du français vers l’italien et le polonais
PublikacjaThe present paper examines the transfer of nomino-adjectival collocations based on the word ‘femme’ (‘woman’) in the literary translation from French into Italian and Polish. The lexical connection analysed in the article can be defined as the habitual juxtaposition of a word with another word (or words) that has a significant frequency in a given language. The research corpus comprises seven Michel Houellebecq’s novels written...
-
Efficiency of the Use of LTE System Radio Resources in Highway Transport Enironment
PublikacjaThe paper describes the problem of analysis of throughput-coverage characteristics of the LTE system. Simulation results of the efficiency of the use of LTE radio resources are presented. Simulation studies on the basis of original model of the LTE network simulator were carried out. In addition, the evaluation of throughput for a single connection, and available capacity were evaluated in the context of the use of the same...
-
On a design of a torque sensor for the iCub humanoid robot
PublikacjaThe paper presents the evaluation process of a first version of the one axis torque sensor designed for the iCub humanoid robot. Newly designed strain gauges equipped sensor was found to show a significant readouts hysteresis, therefore several tests were run to define the reason of the hysteresis. Some of the design issues met while testing the new sensor are discussed including the screws connection and relative rigidity of the...
-
Knowledge risks inherent in business sustainability
PublikacjaSince the connection between business sustainability and knowledge risks has not been established in the literature so far, this paper provides a conceptual framework to demonstrate the possible impact of various knowledge risks on business sustainability and offers potential ways to manage and overcome these risks. The aim of this conceptual paper is to address two main questions: What are the potential effects of knowledge risks...
-
High Dynamic Range Microwave Displacement and Rotation Sensors Based on the Phase of Transmission in Groove Gap Waveguide Technology
PublikacjaThis research is focused on the design and realization of displacement sensors in gap waveguide technology. It is shown that with a small but fundamental change in the structure of a conventional gap waveguide, a linear displacement can be sensed. To this end, a unique feature of gap waveguides, i.e. the fact that no electrical connection between the top and bottom parts of the gap waveguide is required, is used. It is further shown...
-
The study of acoustic climate of the Southern Baltic
PublikacjaThis paper presents the statistical characteristics of seawater properties, which are necessary for predicting the propagation of acoustic waves in selected areas of the Baltic Sea. The statistics were elaborated based on long-term measurements of vertical distributions of sound speed, temperature, and salinity, and the nonlinearity parameter B/A. Nonlinear properties of the environment are considered, in connection...
-
Application of wireless communication to small WECS with induction generator
PublikacjaWind energy conversion systems (WECS) seem to be self-evident elements of the future smart grids. Among many generator types the squirrel cage induction generator (SCIG) characterizes robustness and low cost. A full-scale power converter can perform smooth grid connection over wide speed range of multiple-stage geared SCIG. Increasing number of sensors can improve the WECS control and diagnostics but increasing number of thin wires...
-
RSVP-TE as a reservation protocol for optical networks
PublikacjaIn this paper, we consider the reservation of optical resources problem. We implement extensions for RSVP-TE (Resource ReSerVation Protocol with Traffic Engineering Extension) to achieve the new functionality for optical resources reservation. Based on ASON/GMPLS architecture we examine an open source implementation KOM RSVP-Engine and extend its functionality according to ITU-T and IETF recommendations. The transport plane consists...
-
Description Logic As A Common Software Engineering Artifacts Language
PublikacjaDescription logic is proposed as a powerful language able to support chosen software engineering process tasks like: requirements engineering, software architecture definition, software design and configuration management. To do this there is presented a correspondence between description logic and UML. Description logic based integrated software engineering process framework is proposed which owing to automatic knowledge inferring...
-
Transition-Metal-Promoted Oxidative Cyclization To Give 1,2,4-Trisubstituted Carbazole Scaffolds
PublikacjaHerein, we describe the synthesis of a 1,2,4-trisubstituted carbazole core from 5-(1H-indol-3-yl)-3-oxopentanoic acid esters or amides. For oxidative cyclization, we tested two different approaches. First, we used manganese triacetate as a conventional moderate oxidizer to ensure the radical course of the reaction. Second, we examined the use of a more complex oxidizing agent I2/Me(OTf)3. In both cases, formation of a fused-ring...
-
The state of the art in the field of decrease the pollution in the South Baltic area
PublikacjaVarious form of human activity such as maritime transports, industrial activities, busy traffic, intensive farming and animal husbandry can have negative impact on natural marine environment. Baltic Sea catchment area is characterized by the high river water flux and wastewater treatment plants discharges. Additionally, the limited shallow connection to the North Sea results in little water exchange and residence time of approximately...
-
Methods of estimating the cost of traffic safety equipment’s life cycle
Publikacjan the article, the authors discuss the preliminary information necessary to determine the scope and direction of further research conducted within the project called “The influence of time and operating conditions on the durability and functionality of road safety elements”. The main objective of the project is to develop the concept of a method for optimizing the life cycle costs of road safety devices. The authors draw attention...
-
The Impact of Wind Generation on the Transmission System
PublikacjaThis article has been published to investigate the im-pact of the wind power on the power system- this is a system dependent issue that requires to perform sys-tem specific impact study. This paper discusses the impact of power flow, short circuit current, power quali-ty, voltage stability and the power system during the connection of a wind farm into transmission system. W referacie omówiono wpływ farm wiatrowych na pracę systemu...
-
Mechanical compatibility of implants used in hernia repair with abdominal wall
PublikacjaThe paper deals with a membrane model of a synthetic surgical mesh for treatment of abdominal hernia. The authors analyse the compatibility of two implant types with the human wall: Dualmesh Gore and Proceed. The finite element method is applied to simulate tjhe behavior of the proposed model. Due fact that recurrences are usually caused by connection failure, this study is focused on reaction forces in supports representing the...
-
Distributed state estimation using a network of asynchronous processing nodes
PublikacjaWe consider the problem of distributed state estimation of continuous-time stochastic processes using a~network of processing nodes. Each node performs measurement and estimation using the Kalman filtering technique, communicates its results to other nodes in the network, and utilizes similar results from the other nodes in its own computations. We assume that the connection graph of the network is not complete, i.e. not all nodes...
-
Distributed state estimation using a network of asynchronous processing nodes
PublikacjaWe consider the problem of distributed state estimation of continuous-time stochastic processes using a~network of processing nodes. Each node performs measurement and estimation using the Kalman filtering technique, communicates its results to other nodes in the network, and utilizes similar results from the other nodes in its own computations. We assume that the connection graph of the network is not complete, i.e. not all nodes...
-
Practical aspects of testing superconducting electromagnets by the capacitor discharge method taking into account the non-linearity of circuit parameters
PublikacjaThe article presents selected issues related to the development and testing of the diagnostics systems dedicated for superconducting electromagnets. The systems were constructed to assess the production quality of superconducting electromagnets of the SIS100 synchrotron, a new accelerator being built as part of the Facility of Antiproton and Ion Research (FAIR). One of the systems is used for automatic checking of electrical connection...
-
The conducted EMI in DC-DC converters
PublikacjaThis book presents the phenomena of conducted electromagnetic interference (EMI) generation in DC-DC converters. The measurement and simulation are used to analyze the impact of the most important parameters on the character, level and propagation path of interference. In this book, the analysis of the interference generation and propagation is presented on the example of three basic converters. The wide banded behavior of all...
-
A novel genetic approach to provide differentiated levels of service resilience in IP-MPLS/WDM networks
PublikacjaThis paper introduces a novel class-based method of survivable routing for connection-oriented IP-MPLS/WDM networks, called MLS-GEN-H. The algorithm is designed to provide differentiated levels of service survivability in order to respond to varying requirements of end-users. It divides the complex problem of survivable routing in IP-MPLS/WDM networks into two subproblems, one for each network layer, which enables finding the...
-
Dynamics of mechanical model of implant-tissue system in ventral hernia repair
PublikacjaThe paper deals with a finite element modelling of implants in the problem of ventral hernia repair. The synthetic mesh implanted in the abdomen during surgery is here modelled as a membrane structure. Thesystem undergoes the internal abdominal pressure that occurs during the postoperative cough, the load identified in the literature as the main cause of the connection failure and hernia recurrence. The model can be used to estimate...
-
Low-Loss Mechanically Tunable Resonator and Phase Shifters in Groove Gap Waveguide Technology
PublikacjaThis research is focused on the design and realization of high-performance high-power variable phase shifters in groove gap waveguide technology. Specifically, it is shown that the unique characteristic of groove gap waveguides, which is its proper operation without the need for electrical connection between the top and bottom sections of the waveguide, can be used to design mechanically tunable devices. Using the proposed method,...
-
Control system for contactless electrical energy transfer with varying air gap
PublikacjaInductive power transfer (IPT) is a system by which electrical energy may be transmitted without electrical connection through a large air gap between coils. Systems usually considered in the literature are the ones with a constant air gap. The paper describes the analysis of IPT, which allows for supplying an electrical load in the conditions of slow, in relation to the dynamics of power supply, changes in the dimensions of the...
-
Water related esthetics - the phenomenon of new structure in the post industrial shipyard areas
PublikacjaDirection of the main movements that are made in the European cities determines not only structural but also an esthetic changes. Paper follows the topic of visual diversity of post industrial waterfront cities and it’s relation to the local identity and cultural changes that are provided. Reshaping of the cities continuously proceed. Are those changes related with industrial shipyard districts only economical and spatial or also...
-
Euro 2012 in Gdańsk, Poland. Is it worth using public funds?
PublikacjaThe aim of this study is to estimate the willingness - to - pay (WTP) among the community of the Pomeranian region, Poland in connection with intangible benefits and costs st emming from hosting the Euro 2012 in Gdansk. A survey conducted among 407 respondents was the source of information. The results of the study show that the average value of WTP benefit for the whole sample was 45,72 PLN2012 and WTP cost...
-
NUMERICAL MODELLING AND EXPERIMENTATION OF HISTORICAL CARPENTRY CORNER LOG JOINTS
PublikacjaThe main purpose of this research is to determine the stress distributions on the contact surfaces between the logs of the historical carpentry corner joints. The additional purpose is to compare the stress distribution for four different boundary conditions in the case of dry and wet pine wood. The paper presents the results of numerical analysis of the shortcorner dovetail connection and the saddle notch corner joint, which are...
-
Routing Method for Interplanetary Satellite Communication in IoT Networks Based on IPv6
PublikacjaThe matter of interplanetary network (IPN) connection is a complex and sophisticated topic. Space missions are aimed inter alia at studying the outer planets of our solar system. Data transmission itself, as well as receiving data from satellites located on the borders of the solar system, was only possible thanks to the use of powerful deep space network (DSN) receivers, located in various places on the surface of the Earth. In...
-
Stock Markets’ Reactions to the Announcement of the Hosts. An Event Study in the Analysis of Large Sporting Events in the Years 1976–2032
PublikacjaThis study attempts to estimate the impact of the announcements of hosts of large sporting events on domestic stock markets. The research problem is to establish a connection between the uniqueness of a sporting event and investors’ beliefs through stock price behavior. Using appropriate estimation windows, 13 different sporting events classified as large, including mega and major events, were tested. The obtained results show...
-
On the exact equilibrium conditions of irregular shells reinforced by beams along the junctions
PublikacjaThe exact, resultant equilibrium conditions for irregular shells reinforced by beams along the junctions are formulated. The equilibrium conditions are derived by performing direct integration of the global equilibrium conditions of continuum mechanics. New, exact resultant static continuity conditions along the singular curve modelling reinforced junction are presented. The results do not depend on shell thickness, internal through-the-thickness...
-
Relations between magnetosonic perturbations as an indicator of a magnetosonic exciter and equilibrium parameters of a plasma
PublikacjaThe thermodynamic relations between perturbation of pressure and pertur- bation of mass density and between components of velocity which specify a magnetosonic wave are theoretically studied. A planar flow with the wave vec- tor forming a constant angle with the equilibrium magnetic field is investigated. The theory considers deviation from the adiabaticity of a flow due to some kind of heating–cooling function and thermal conduction...
-
Three-point bending test of sandwich beams supporting the GFRP footbridge design process - validation
PublikacjaSome selected aspects concerning material and construction design issues for pedestrian footbridge made of GFRP composite materials are elaborated in this paper. The analysis is focused on validation tests, which are particularly important because of the advanced technology and materials that are used for this innovative bridge. The considered footbridge is a sandwich-type shell structure comprising of PET foam core and outer skins...
-
Virtual Engineering Factory: Creating Experience Base for Industry 4.0
PublikacjaABSTRACT In recent times, traditional manufacturing is upgrading and adopting Industry 4.0, which supports computerization of manufacturing by round-the-clock connection and communica- tion of engineering objects. Consequently, Decisional DNA- based knowledge representation of manufacturing objects, processes, and system is achieved by virtual engineering objects (VEO), virtual engineering processes (VEP), and virtual engineering...
-
IN VIVO DEGRADATION OF BIOMATERIALS
PublikacjaThe material designed to be introduced into the human tissue should be biocompatible and biofunctional. Unless it is so, the body may respond to the implant in different ways. An inflammation reaction may appear such as: parting of items of the implant surface resulting from fraction or pressure. The condition of the surface has an important influence on the usefulness of the implant. The required values depend on the implant function...
-
Modeling, simulation, and validation of a TB41 crash test of the H2/W5/B concrete vehicle restraint system
PublikacjaThe paper addresses numerical simulations of a concrete vehicle restraint system. The model is described in detail. The advanced material law of the continuous surface cap model was used to analyze the damage locations in concrete barrier segments. The results were validated against the TB41 full-scale crash test. The test was conducted in compliance with European standard EN 1317, and the validation was performed in accordance...
-
Geospatial Coverage and Signal Quality Measurements of Terrestrial DAB+ Network in Northern Poland
PublikacjaModern signal coverage maps are prepared based on industry-standard radio propagation models, which take into account a number of parameters, including: type of antenna, distance from the transmitter, type of terrain, etc. However, such simulations are prone to location-specific inaccuracies, and should be verified with in-situ measurements. This paper presents results of a field test of a terrestrial DAB+ (Digital Audio Broadcasting...
-
The Concept of Accuracy Analysis of the Vertical Displacements Gained from the Hydrostatic Levelling Systems’ Measurements
PublikacjaAbstract: Nowadays, hydrostatic levelling is a widely used method for the vertical displacements’ determinations of objects such as bridges, viaducts, wharfs, tunnels, high buildings, historical buildings, special engineering objects (e.g., synchrotron), sports and entertainment halls. The measurements’ sensors implemented in the hydrostatic levelling systems (HLSs) consist of the reference sensor (RS) and sensors located on the...
-
Index filtrations and Morse decomposition for discrete dynamical systems
PublikacjaOn a Morse decomposition of an isolated invariant set of a homeomorphism(discrete dynamical system) there are partial orderings defined by the homeomorphism.These are called admissible orderings of the...
-
Logical Interface for Soft Handover – an effective scheme of handovers in Proxy Mobile IPv6
PublikacjaMultimedia services are currently commonly available on mobile devices. Due to networks' convergence and migration to all-IP networks, mobility management at network layer is required. Moreover, nowadays it is popular to equip mobile devices with more than one wireless interface. Thus, soft handovers can be implemented, which means that an existing connection is removed after a new one is established. Usage of the Logical Interfaces...
-
Semantic OLAP with FluentEditor and Ontorion Semantic Excel Toolchain
PublikacjaSemantic technologies appear as a step on the way to creating systems capable of representing the physical world as real time computational processes. In this context, the paper presents a toolchain for an ontology based knowledge management system. It consists of the ontology editor, FluentEditor and the distributed knowledge representation system, Ontorion. FluentEditor is a comprehensive tool for editing and manipulating complex...
-
Residual MobileNets
PublikacjaAs modern convolutional neural networks become increasingly deeper, they also become slower and require high computational resources beyond the capabilities of many mobile and embedded platforms. To address this challenge, much of the recent research has focused on reducing the model size and computational complexity. In this paper, we propose a novel residual depth-separable convolution block, which is an improvement of the basic...
-
Soft – Partial Frequency Reuse Method for LTE-A
PublikacjaIn the paper a novel SPFR frequency reuse method is proposed which can be used for improvement of physical resources utilization efficiency in LTE-A. The proposed method combines both SFR and PFR giving the possibility of more flexible use of frequency band in different regions of a cell. First, a short study on the problem of frequency reuse in cells is discussed including bibliography overview....
-
Social perception of technological innovations at sports facilities: justification for financing ‘white elephants’ from public sources? The case of Euro 2012 Stadiums in Poland
PublikacjaThe main purpose of the paper is to provide a monetary valuation of social benefits in connection with the hypothetical implementation of technological innovations at four Euro 2012 stadiums in Poland. Not only the construction of the sport’s arenas, but also the ongoing maintenance drain the pockets of Polish taxpayers. At the same time Euro 2012 stadiums remain underused, which familiarize the host cities with the concept of ‘white...
-
Extensions of ETSI performance measurements methodology for statistical results analysis =Rozszerzenia metodologii pomiarów wydajności zaproponowanej przez ETSI przy statystycznej analizy wyników
PublikacjaNext Generation Network (NGN) architecture was proposed by International Telecommunication Union Telecommunication Standardization Sector (ITU-T) to deliver telecommunication services satisfying the needs of modern society for an access to information. The core of NGN service stratum are IP Multimedia Subsystem (IMS) elements acting as service controls units. To assess performance of IMS components, European Telecommunications...
-
The influence of the motor filtrers on harmonic current emmision in the pro-ective connection of drive systems.
PublikacjaThis paper contains detailed analysis of currents in protective wire in engine supplied from frequency converter without any external filters added. It was found that the peak value of current in protective conductor of engine was about 1500 mA at frequencies 5 Hz 50 Hz. In the continuation of research the dU/dt type motor filter and the sinusoidal filter were tested. It was found that the current in protective wire decreased...
-
Graphene Reinforced Phenolic Foams
PublikacjaPhenolic foams (PF) belong to the polymeric materials, which are very attractive from the point of many possible applications such as insulation or fire protection materials. This chapter attempts to explain the influence of graphene and graphene derivatives on the phenolic foams. This work briefly presents different graphene nanoparticles introduced to the phenolic foams matrix, in terms of impact on the thermal, mechanical, and...
-
Adapting education to a changing climate: preparing architecture students for climate-resilient design
PublikacjaIn this article, the authors explore the connection between climate change and the fields of architecture and urban planning. With the increasing frequency of flooding and extreme weather events, the built environment is confronting challenges in terms of sustainability and resilience. To meet these problems, it is necessary to prepare various specialists to assume responsibility for making future decisions. The authors of this...