Wyniki wyszukiwania dla: environmentally adaptable lubricants
-
ASSESSING THE POTENTIAL REPLACEMENT OF MINERAL OIL WITH ENVIRONMENTALLY ACCEPTABLE LUBRICANTS IN A STERN TUBE BEARING: AN EXPERIMENTAL ANALYSIS OF BEARING PERFORMANCE
PublikacjaT his study compares the performance of a plain bearing, with a similar structure to a tail shaft stern bearing, lubricated with either mineral oil or an environmentally acceptable lubricant (EAL). The main characteristic of the bearing is its length/diameter ratio of <1. Measurements are carried out with the bearing operating under loads from 0.5 to 1 MPa and seven speeds ranging from 1 to 11 rev/s. The bearing lubricated...
-
Environmentally acceptable lubricants (EAL) compared with a reference mineral oil as marine stern tube bearing lubricant – Experimental and theoretical investigations
PublikacjaThe purpose of this research is to indicate the potential differences in bearing characteristics resulting from the application of different lubricant types with the same viscosity grade. The effect of different environmentally acceptable lubricants (EALs) on hydrodynamic journal bearing properties is studied experimentally and compared to the properties obtained after lubrication with a reference mineral oil. The results of the...
-
Comparative wear test of journal sliding bearings with sintered bronze and Babbitt alloy bushes lubricated by environmentally acceptable/adapted lubricants (EAL)
PublikacjaA growing awareness of the negative effects of mineral oils on the natural environment has resulted in the introduction of new regulations related to environmental protection. One of these regulations requires the use of environmentally acceptable/adapted lubricants (EAL) to lubricate marine main shaft bearings, in place of the mineral lubricating oils that have been used for decades. Classification Societies, which supervise...
-
Hydro Lubricants: Water-based lubricants for hydropower applications
PublikacjaSeveral different base oil types exist in the market including mineral and synthetic oils (e.g. polyalphaolefins, ester, polyglycol, etc.) and are currently widely in use. Although synthetic oils have drawn great attention over the past few decades in terms of their tribological benefits, mineral oils are still widely used in hydropower applications due primarily to their low cost and easy miscibility with other oils. However,...
-
Multi Parameter Sliding Test Result Evaluation for The Selection of Material Pair for Wear Resistant Components of a Hydraulic motor Dedicated for Use With Environmentally Friendly Working Fluids
PublikacjaIn the paper the method and results are presented of the testing of tribological performance of a number of hard materials available commercially. The tests consisted in unidirectional sliding with liquid lubrication. The load and velocity regime chosen were similar to a standard four-ball lubricity test with constant velocity and load increasing over time. The regime was modified in such a way that over the initial part of the...
-
Lubricants
Czasopisma -
Ecology In Tribology: Selected Problems of Eliminating Natural Oil-Based Lubricants from Machine Friction Couples
PublikacjaThe elimination of mineral oil-based lubricants from machines has multiple beneficial effects on the natural environment. Firstly – these lubricants are a direct threat to the environment in the event of leaks; secondly – their elimination reduces the demand for crude oil from which they are obtained. In addition, in many cases, e.g. when replacing traditional lubricants with water, friction losses in the bearings can also be reduced...
-
Investigating lubricants behaviour in microgravity for vibration damping purposes
PublikacjaVibration is one of the harshest environments an object is exposed to during and after launch into space on a launch vehicle. Such vibrations should be damped to avoid destruction of the spacecraft or its elements. Currently, active and material damping is used. A possibility of using lubrication as the damping factor is suggested by some research. MoS2 is a typical solid lubricant used in space applications. Its properties vary...
-
THE COMPARATIVE ANALYSIS OF ECOLOGICAL LUBRICANTS
Publikacja -
Performance analysis of untraceability protocols for mobile agents using an adaptable framework
PublikacjaArtykuł przedstawia środowisko oceny wydajności protokołów ochrony przed tropieniem agentów mobilnych oraz wyniki analiz przeprowadzonych za jego pomocą. Chociaż środowisko projektowano i implementowano z myślą o ewaluacji zaproponowanych przez nas protokołów ochrony przed tropieniem, w trakcie badań okazało się, że może ono zostać również wykorzystane do badań całej klasy protokołów bezpieczeństwa dla agentów mobilnych. Chodzi...
-
Influence of addition of carbon nanotubes on rheological properties of selected liquid lubricants - a computer simulation study
PublikacjaThis work is motivated by the improvement of anti-friction properties of lubricants by addition of CNTs proved experimentally in literature. In particular, a methodology is developed to compute the shear viscosity of liquid lubricants (Propylene Glycol) based on Molecular Dynamics simulation. Non-Equilibrium molecular dynamics (NEMD) approach is used with a reactive force field ReaxFF implemented in LAMMPS. The simulations are...
-
The impact of environmentally friendly refrigerants on heat pump efficiency
PublikacjaThis paper discusses the issue of heat pump simulation. Lower operating costs can be achieved through good equipment design and appropriate operation. Detailed technical and economic analysis inform the selection of system components with the highest possible efficiency and lower energy demand. The use of systems based on environmentally friendly refrigerants can deliver long product life, which is associated with a shorter payback...
-
ENVIRONMENTALLY FRIENDLY MATERIALS IN ARCHITECTURE � MODERN TRENDS AND DEVELOPMENT DIRECTIONS
PublikacjaFor a long time the interest in environmentally friendly materials in architecture is no longer limited to the use of renewable and natural substances such as wood, stone, straw, or reusable materials, such as metals or glass. Today the so-called naturals and the materials compatible with the idea of sustainability constantly appear on the market in new forms. Increasing awareness of the necessity to limit the building sector’s...
-
Recognition of environmentally important ions
Publikacja..
-
Extraction with environmentally friendly solvents
PublikacjaThe ever-increasing demand for determining compounds at low concentration levels in complex matrices requires a preliminary step of analytes isolation/enrichment in order to employ a detection technique characterized by high sensitivity at low LOQ. Sample preparation is considered as crucial part of analytical procedures. Previously the parameter of “greenness” is as important as selectivity in order to avoid using harmful organic...
-
Environmentally friendly polymer-rubber composites obtained from waste tyres: A review
PublikacjaThe paper is transdisciplinary. The complex overview on changes in policy and approach to waste tyres that leads to both solving environmental problem of post consumer tyres and creating environmentally friendlier novel materials are presented. It is shown that in the world, the amount of polymer wastes increases every year. Most of them are in the form of post-consumer tyres. Recycling and recovery of such tyres is a serious environmental...
-
Influence of Silicon Additives on Tribological and Rheological Test Results for Vegetable Lubricants
Publikacja -
Waste tire rubber as low-cost and environmentally-friendly modifier in thermoset polymers – a review
PublikacjaNowadays, waste tire rubber (WTR) management is a growing and serious problem. Therefore, research works focused on the development of cost-effective and environmentally-friendly methods of WTR recycling are fully justified. Incorporation of WTR into polymer matrices and composite materials attracts much attention, because this approach allows sustainable development of industrially applicable waste tires recycling technologies....
-
A Green Chemistry "environmentally friendly" approach to the synthesis of chloro-intermediates of ephedrine/pseudoephedrine
PublikacjaMethylamphetamine is an addictive stimulant drug that strongly activates certain systems in the brain. It is closely related chemically to amphetamine, but the central nervous system effects of methamphetamine are greater. There is much interest in methylamphetamine among scientists and therefore the synthesizes of methylamphetamine and its metabolites are carried out on a large scale in chemical laboratories. Globally, ephedrine...
-
Stable and degradable microgels linked with cystine for storing and environmentally triggered release of drugs
PublikacjaEnvironmentally sensitive, degradable microgels based on poly(N-isopropylacrylamide) (pNIPA) crosslinked with the diacryloyl derivative of cystine (BISS) were synthesized by applying surfactant-free emulsion polymerization. pNIPA contributed the sensitivity to temperature to the microgels and the cross-linker made them degradable and sensitive to pH. The morphology of the microgels was investigated by using scanning and transmission...
-
Integrated dewatering and stabilization system as an environmentally friendly technology in sewage sludge management in Poland
PublikacjaSludge treatment reed beds (STRBs) are an environmentally friendly technology which provides integrated dewatering and stabilization of sewage sludge. STRBs do not require the use of chemicals to improve the dewatering process. STRB is both, a low-emission and a low-energy-consuming method. After the stabilization process, sludge is characterized by the chemical composition similar to that of humus. The aim of the paper is to present...
-
Effects of environmentally relevant concentrations of diclofenac in Mytilus trossulus
Publikacja -
Environmentally-Safe Cold Recycling of Asphalt Pavements in Poland
PublikacjaArtykuł przedstawia metodę recyklingu na zimno z zastosowaniem jednoczesnego dodatku cementu portlandzkiego i emulsji asfaltowej. Metoda przydatna do rehabilitacji zniszczonych nawierzchni drogowych. Warstwy po recyklingu charakteryzują się sztywnością i podatnością. Przedstawiono wyniki badań laboratoryjnych i terenowych.
-
Towards sugar-derived polyamides as environmentally friendly materials
PublikacjaAs part of our ongoing study investigating isohexide-based polyamides, we have synthesized isosorbide(bis(propan-1-amine)) (DAPIS) and studied its reactivity in the polymerization towards fully biobased polyamides. Polycondensation of nylon salts with various contributions of DAPIS afforded a family of homo- and copolyamides, which were characterized using complementary spectroscopic techniques. The chemical structure of the materials...
-
Amide/Amino-Based Functional Additives for Lubricants: Structure, Antimicrobial Activity and Wear Resistance
Publikacja -
Effective assessment of biopolymer-based multifunctional sorbents for the remediation of environmentally hazardous contaminants from aqueous solutions
PublikacjaPersistent contaminants in wastewater effluent pose a significant threat to aquatic life and are one of the most significant environmental concerns of our time. Although there are a variety of traditional methods available in wastewater treatment, including adsorption, coagulation, flocculation, ion exchange, membrane filtration, co-precipitation and solvent extraction, none of these have been found to be significantly cost-effective...
-
Environmentally friendly material solutions in the technology of autoclaved aerated concrete
Publikacja -
Assessing ecotoxicity and the endocrine potential of selected phthalates, BADGE and BFDGE derivatives in relation to environmentally detectable levels
PublikacjaThere is no doubt that the subject area of plasticmaterials (e.g., production of epoxy resins or polyesters) is inherently connected to issues concerning bisphenol A (BPA) and its analogues. Unfortunately, much less attention has been given to other compounds, which are also used for the production of these materials. Bisphenol A diglycidyl ether (BADGE) is a synthetic industrial compound obtained by a condensation reaction between...
-
Wpływ ekologicznych czynników roboczych na efektywność układu sprężarkowej pompy ciepła (The impact of environmentally friendly refrigerants on heat pump efficiency)
PublikacjaArtykuł poświęcony jest zagadnieniu symulacji pracy układu sprężarkowej pompy ciepła. Prawidłowe zaprojektowanie instalacji oraz jej właściwe użytkowanie pozwala na zmniejszenie kosztów eksploatacji. Dokładna analiza techniczno-ekonomiczna umożliwia natomiast dobór elementów systemu o możliwie największej sprawności, a zatem niskim zapotrzebowaniu na energię. Zastosowanie układów opartych o perspektywiczne, proekologiczne czynniki...
-
Formation of environmentally friendly chloroorganic compounds technology by sewage and by-products utilization
Publikacja -
ENERGY EFFICIENT AND ENVIRONMENTALLY FRIENDLY HYBRID CONVERSION OF INLAND PASSENGER VESSEL
PublikacjaThe development and growing availability of modern technologies, along with more and more severe environment protection standards which frequently take a form of legal regulations, are the reason why attempts are made to find a quiet and economical propulsion system not only for newly built watercraft units, but also for modernised ones. Correct selection of the propulsion and supply system for a given vessel affects significantly...
-
Environmentally Oriented Models and Methods for the Evaluation of Drug x Drug Interaction Effects
PublikacjaThis detailed review compares known and widely used methods for drug interaction estimation, some of which now have historical significance. Pharmaceutical application has been noted as far back as several thousand years ago. Relatively late in the 20th century, however, researchers became aware that their fate and metabolism, which still remain a great challenge for environmental analysts and risk assessors. For the patient’s...
-
Environmentally friedly propeller shaft support with the use of water lubricated foil bearings
PublikacjaW pracy przedstawiono podsumowanie prowadzonych badań w celu opracowania oryginalnej metodyki projektowania oraz technologii wykonania pierwszego w świecie łożyska foliowego smarowanego wodą. Zaprezentowano koncepcje nowego łożyska foliowego poprzecznego oraz opisano opracowany algorytm obliczeniowy wykorzystany do predykcji jego charakterystyk. W rezultacie prowadzonych prac opracowano i przebadano doświadczalnie na stanowisku...
-
How to make membrane distillation greener? A review on environmentally friendly and sustainable aspects
PublikacjaThere is an urgent need for the development of new water resources in order to solve the problem of the world’s growing demand for clean water. Membrane distillation (MD) is a promising alternative to conventional seawater desalination. Although MD itself is often defined as sustainable desalination technology, there are many aspects within the membrane manufacture and process operation that make it far from being green. For instance,...
-
SAE International Journal of Fuels and Lubricants
Czasopisma -
Modelling relation between oxidation resistance and tribological properties of non-toxic lubricants with the use of artificial neural networks
Publikacja -
Structure and performance properties of environmentally-friendly biocomposites based on poly(ɛ-caprolactone) modified with copper slag and shale drill cuttings wastes
PublikacjaThe potential application of two types of industrial wastes, drill cuttings (DC) and copper slag (CS), as silica-rich modifiers of poly(ɛ-caprolactone) (PCL) was investigated. Chemical structure and physical properties of DC and CS fillers were characterized using X-ray diffractometer, X-ray fluorescence spectroscopy, particle size and density measurements. PCL/DC and PCL/CS composites with a variable content of filler (5 to 50...
-
Environmentally Friendly Fabrication of High-Efficient Fe-ZnO/Citric Acid-Modified Cellulose Composite and the Enhancement of Photocatalytic Activity in the Presence of H2O2
PublikacjaIn the present study, a novel Fe-ZnO/citric acid-modified cellulose composite (x%Fe-ZnOy% CAC) was synthesized using an environmentally friendly hydrothermal method. The obtained samples were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), UV−vis diffuse reflectance spectroscopy (DRS), Fourier transform infrared spectroscopy (FTIR), nitrogen physisorption, and electrochemical and photocurrent density...
-
Waste tire rubber as low-cost and environmentally-friendly modifier in thermoset polymers – A review
Publikacja -
Impact of inorganic ions and pH variations on toxicity and endocrine potential of selected environmentally relevant pharmaceuticals
PublikacjaAssessment of the impact of pharmaceutical residues on living organisms is a very complex subject. Apart from taking into account the toxicity of individual compounds, environmental factors should also be taken into account. In this paper, attempts were made to assess the impact of coexisting inorganic ions and changes in pH on the toxicity of ten selected pharmaceuticals. Two bioassays were used to measure the estrogenic and androgenic...
-
Healthier and Environmentally Responsible Sustainable Cities and Communities. A New Design Framework and Planning Approach for Urban Illumination
PublikacjaAlthough sustainability and sustainable development are both considered necessary practices in various fields today, a recent analysis showed that the Sustainable Development Goal SDG11: Sustainable Cities and Communities established by the United Nations does not address urban illumination and its impact. This oversight is of concern because research carried out in the last 20+ years indicates artificial light at night (ALAN)...
-
Finding the Right Solvent: A Novel Screening Protocol for Identifying Environmentally Friendly and Cost-Effective Options for Benzenesulfonamide
PublikacjaThis study investigated the solubility of benzenesulfonamide (BSA) as a model compound using experimental and computational methods. New experimental solubility data were collected in the solvents DMSO, DMF, 4FM, and their binary mixtures with water. The predictive model was constructed based on the best-performing regression models trained on available experimental data, and their hyperparameters were optimized using a newly...
-
Multifunctional catalyst-assisted sustainable reformation of lignocellulosic biomass into environmentally friendly biofuel and value-added chemicals
PublikacjaRapid urbanization is increasing the world's energy demand, making it necessary to develop alternative energy sources. These growing energy needs can be met by the efficient energy conversion of biomass, which can be done by various means. The use of effective catalysts to transform different types of biomasses will be a paradigm change on the road to the worldwide goal of economic sustainability and environmental protection. The...
-
Trends in Automotive Emission Legislation: Impact on LD Engine Development, Fuels, Lubricants and Test Methods: a Global View, with a Focus on WLTP and RDE Regulations
Publikacja -
Chemical surface etching methods for ground tire rubber as sustainable approach for environmentally-friendly composites development– a review
PublikacjaGround tire rubber (GTR) has been used as a sustainable low-cost modifier in various composites. However, due to the hydrophobic nature of GTR, it is in compatible with most matrices and results in deterioration in both mechanical and physical properties of composites. This necessitates pre-modification of the powdered rubber to improve the interfacial bonding at the rubber-matric interface. The most common GTR modification research...
-
Structure, Mechanical, Thermal and Fire Behavior Assessments of Environmentally Friendly Crude Glycerol-Based Rigid Polyisocyanurate Foams
PublikacjaIn this work, rigid polyisocyanurate foams were prepared at partial substitution (0–70 wt%) of commercially available petrochemical polyol, with previously synthesized biopolyol based on crude glycerol and castor oil. Influence of the biopolyol content on morphology, chemical structure, static and dynamic mechanical properties, thermal insulation properties, thermal stability and flammability was investigated. Incorporation of...
-
Partition coefficients of selected environmentally important volatile organic compounds determined by gas - liquid chromatography with polydimethylsiloxane stationary phase
PublikacjaPrzedstawiono wartości współczynników podziału (stałych podziału) 14 lotnych związków organicznych istotnych dla stanu środowiska (często oznaczanych w powietrzu w pomieszczeniach zamkniętych) między fazą gazową (N2) a ciekłą (PDMS). Wyznaczano je dwiema technikami (izotermiczną i z liniowo programowanym wzrostem temperatury). Dowiedziono, że istnieje możliwość wyznaczania współczynników podziału techniką LTPRI w oparciu o skalę...
-
Unraveling a novel microwave strategy to fabricate exposed {001}/{101} facets anatase nanocrystals: Potential for use to the elimination of environmentally toxic metronidazole waste
PublikacjaThis study present a novel microwave strategy to fabricate highly active anatase particles, exposing {101} and {001} facets. Microwave treatment time was shown to determine the growth of crystals in a certain direction. To the best of our knowledge, it is the first report revealing that the contact time of TiO2 crystals with fluorine ions during the microwave process affects the formed morphology, in particular exposed facets ratio....
-
Multi Parameter Sliding Test Result Evaluation for the Selection of Material Pair for Wear Resistant Components of a Hydraulic Motor Dedicated for Use with Environmentally Friendly Working Fluids
Publikacja -
Multi parameter sliding test result evaluation for the selection of material pair for wear resistant components of a hydraulic motor dedicated for use with environmentally friendly working fluids
PublikacjaW referacie przedstawiono zastosowanie metody badań tribologicznych pozwalającej na dokonywanie doboru najlepszych skojarzeń tribologicznych z wybranej populacji poprzez parametryczną ocenę wyników z wielu rodzajów testów tribologicznych wykonywanych na identycznych skojarzeniach materiał - smar - materiał.
-
A method for evaluating durability of porous slide bearings
PublikacjaThe article presents the structures of porous bearings bushes and greasy lubricants, and the similarity criterion resulting from this structures. A phisical model is proposed which describes the operation of the porous slide bearing bush taking into account, via analogy, the phenomena taking place in the grease lubricant nodes instead of those observed in the bush structures.Included are the result of experimental tests of three...
-
Friction and Lubrication of Large Tilting-Pad Thrust Bearings
PublikacjaFluid film bearings have been extensively used in the industry because of their unbeatable durability and extremely low friction coefficient, despite a very low coefficient of friction dissipation of energy being noticeable, especially in large bearings. Lubricating systems of large tilting pad thrust bearings utilized in large, vertical shaft hydrogenerators are presented in this paper. A large amount of heat is generated due...
-
Tribological Anti-Wear and Extreme-Pressure Performance of Multifunctional Metal and Nonmetal Doped C-based Nanodots
Publikacja -
Field Tests on Hydrodynamic and Hybrid Operation of a Bidirectional Thrust Bearing of a Pump-Turbine
PublikacjaIn vertical shaft pump turbines operating in pumped storage power plants an important role is played by a thrust bearing. Due to the bidirectional character of operation, thrust bearing tilting pads have to be supported symmetrically, which is known to be unfavourable from the point of view of their performance. Large thrust bearings have to be carefully designed so as to minimise excessive thermo-elastic pad deformations. The...
-
Improvement of Thrust Bearing Calculation Considering the Convectional Heating within the Space between the Pads
PublikacjaA modern thrust bearing tool is used to estimate the behavior of tilting pad thrust bearings not only in the oil film between pad and rotating collar, but also in the space between the pads. The oil flow in the space significantly influences the oil film inlet temperature and the heating of pad and collar. For that reason, it is necessary to define an oil mixing model for the space between the pads. In the bearing tool, the solutions...
-
Process [Intellectual Output 2] Guidelines for a design process leading to a high-quality Baukultur in the digital age
PublikacjaThe main aim of the intellectual output “Process” is to identify, explore and evaluate new design processes for shaping the built environment, which are informed, collaborative, and adaptable, allow customization and are generally enabled by the application of digital tools. Further, it aims at creating methodological guidelines for future-oriented design processes leading to a high-quality Baukultur in the digital age. The guidelines...
-
Ecological and Health Effects of Lubricant Oils Emitted into the Environment
PublikacjaLubricating oils used in machines with an open cutting system, such as a saw or harvester, are applied in forest areas, gardening, in the household, and in urban greenery. During the operation of the device with an open cutting system, the lubricating oil is emitted into the environment. Therefore, the use of an oil base and refining additives of petroleum origin in the content of lubricants is associated with a negative impact...
-
Some problems of slide bearing material fatigue evaluation.
PublikacjaA slide bearing alloy resistance against fatigue failures have been investigated for three different lubricants, different heat loadings and different stress ratio κ values. The research methods and data handling procedures for determination of particular parameter effects on fatigue strength have been described and analysed for experiments that were set and performed in laboratory tester SKMR-2. Main and interaction effects of...
-
FEX a Fingers Extending eXoskeleton for Rehabilitation and Regaining Mobility
PublikacjaThis paper presents the design process of an exoskeleton for executing human fingers’ extension movement for the rehabilitation procedures and as an active orthosis purposes. The Fingers Extending eXoskeleton (FEX) is a serial, under-actuated mechanism capable of executing fingers’ extension. The proposed solution is easily adaptable to any finger length or position of the joints. FEX is based on the state-of-art FingerSpine serial...
-
TECHNOLOGY OF CREATING AND USAGE OF PROECOLOGICAL BLOCK EMPTYSEED
PublikacjaNowadays, finding natural substitutes for mass-produced materials is one of the main tasks faced by scientists and designers. There is an increasing emphasis on the theme of ecology and the need for sustainability. Variants and methods are sought which will create environmentally friendly materials in a fast, relatively inexpensive and ecological way. The aim of this paper is to present different proposals of natural building materials...
-
Ecological bearing systems for water turbines – research and development at Gdansk University of Technology
PublikacjaIncreasing requirements for environmental protection make it necessary to introduce new materials and designs. Hydroelectric power plants operating in direct contact with water reservoirs and rivers are potentially endangering water cleanliness, hence they should also be modernized in the way minimizing the environmental hazards. A lot of progress in this field has been achieved in last decades, but still there is much work to...
-
Technology-Enhanced Environmental Learning: Co-design of Educational Mobile Application Case
PublikacjaThe process of co-creating an educational mobile application to support environmentally friendly behavior is presented in this paper. The research material consisted of quantitative data collected on the application during the first testing phase by early adopters. The results suggest that the most frequently used features of the app were related to transport and educational activities. While women tended to split their time between...
-
RESEARCH ON HYDRODYNAMIC PEEK JOURNAL BEARINGS LUBRICATED WITH WATER AND OIL
PublikacjaThe main purpose of the research was to determine the possibilities and experimentally test the benefits of replacing conventional oil lubrication with ecological water lubrication. Tests were carried out on a test rig for hydrodynamic radial bearings under conditions representative of the expected applications for the bearing in water turbines. Bearings made from the polymer material PEEK (polyether ether ketone) were tested under static...
-
WEAR OF Si OR B DOPED AMORPHOUS CARBON COATINGS
PublikacjaThe paper describes a complex wear research on DLC (amorphous carbon) moped with boron (B) and silicone (Si). The tests were carried out in two different sliping systems: flat–on–flat (ring contact, unidirectional sliding) and ball–on–flat (reciprocating sliding). Water and medical saline solutions were used as lubricants. A comparative analysis of the results revealed differences in the initiation and progress of wear and the...
-
Towards Knowledge Formalization and Sharing in a Cognitive Vision Platform for Hazard Control (CVP-HC)
PublikacjaHazards are present in all workplaces and can result in serious injuries, short and long-term illnesses, or death. In this context, management of safety is essential to ensure the occupational health of workers. Aiming to assist the safety manage-ment process, especially in industrial environments, a Cognitive Vision Platform for Hazard Control (CVP-HC) has been proposed. The CVP-HC is a scalable yet adaptable system capable of...
-
Experimental research on marine oil-lubricated stern tube bearing
PublikacjaBearings of propeller shafts are very crucial elements of the propulsion system of each of the ships. The safety of shipping depends on their durability and reliability. The new legal restrictions mean that today we are looking for environmentally friendly solutions. That is why water-lubricated bearings are becoming more and more popular. So, will oil-lubricated shaft bearings belong to the past? The bearing with a white metal...
-
Calculation of motion trajectory and geometric parameters of the trawl during pelagic fishing
PublikacjaThis paper presents a mathematical model of the mass centre motion trajectory of the trawl, its main geometrical parameters, way of solving the model as well as its example results. It could be useful to define optimum parameters of safe, effective and environmentally friendly pelagic fishing.
-
Visual Content Learning in a Cognitive Vision Platform for Hazard Control (CVP-HC)
PublikacjaThis work is part of an effort for the development of a Cognitive Vision Platform for Hazard Control (CVP-HC) for applications in industrial workplaces, adaptable to a wide range of environments. The paper focuses on hazards resulted from the nonuse of personal protective equipment (PPE). Given the results of previous analysis of supervised techniques for the problem of classification of a few PPE (boots, hard hats, and gloves...
-
Research and applications of active bearings: A state-of-the-art review
PublikacjaControllable/active bearings are mainly associated with active magnetic bearings (AMBs), whereas active bearing control is also found in many types of bearings, e.g. fluid, gas and hybrid bearings. The article presents a review of the literature describing the structure and results of studies of active bearings. Active control brings a number of benefits resulting in the fact that their use as a support for rotors becomes increasingly...
-
Fuel, Oils and Greases, W, E, sem.01, zimowy 22/23
Kursy OnlineDivision and origin of fuels. Fossil energy resources in Poland and in the world. Production and structure of fuel consumption. Main directions of crude oil processing. Classification and physical properties of gaseous and liquid fuels - natural gas, gasoline, kerosene, diesel oil, heating oil. Classification and characteristic indicators of solid fuels - hard coal, lignite, peat. Fuel contaminants and methods of their removal....
-
Adapting new tools of urban freight management based on Gdynia’s dedicated delivery bays example – an analysis of the process
PublikacjaThe article presents an analysis of a process which ultimately helped Gdynia to designate pilot delivery sites in its downtown area using international experience. A verification was conducted of policy transfer theory and its practical implementation based on an URBACT Freight Tails project. While the choice of the solution was based on critical analysis of existing practical examples, it needed to be adapted to the local conditions...
-
Mass Spectrometry-Based Direct Analytical Techniques
PublikacjaDirect analysis of samples is considered as one of the most environmentally sustainable solutions in analytical chemistry. In the ideal case, such solutions do not require sample preparation and analytes separation steps, therefore do not consumpt harmful substances (or consumpt only minimum amounts of them) and do not generate hazardous waste. Technical solutions for direct analysis also offer miniaturized and field-portable analyzers...
-
Bio-mitigation of organic pollutants using horseradish peroxidase as a promising biocatalytic platform for environmental sustainability
PublikacjaA wide array of environmental pollutants is often generated and released into the ecosystem from industrial and human activities. Antibiotics, phenolic compounds, hydroquinone, industrial dyes, and Endocrine-Disrupting Chemicals (EDCs) are prevalent pollutants in water matrices. To promote environmental sustainability and minimize the impact of these pollutants, it is essential to eliminate such contaminants. Although there are...
-
Biosurfactants - Biodegradability, toxicity, efficiency in comparison with synthetic surfactants
PublikacjaBiosurfactants are natural surface active agents produced by variety of bacteria yeast and fungi. A review of their biodegradability, toxicity and efficiency is presented in order to compare their properties with synthetic surfactants. Due to their high efficiency in many applications and environmentally friendly character we tried to apply them in oil refining process. The efficiency of biosurfactants in this application was very...
-
Investigation of sensing mechanism of Nasicon electrocatalytic sensors in nitrogen dioxide and ammonia
PublikacjaIn this paper a sensing mechanism of Nasicon electrocatalytic sensor in nitrogen dioxide and ammonia is investigated. Both gases are environmentally hazardous and contain nitrogen atom in the molecule. However, it seems that their sensing mechanism in electrocatalytic sensor could be totally different. Namely, the maximum sensitivity for each gas was obtained at different temperatures. Also, different auxiliary layers are formed...
-
Fuel, Oils and Greases, W, E, sem.03, zimowy 22/23
Kursy OnlineDivision and origin of fuels. Fossil energy resources in Poland and in the world. Production and structure of fuel consumption. Main directions of crude oil processing. Classification and physical properties of gaseous and liquid fuels - natural gas, gasoline, kerosene, diesel oil, heating oil. Classification and characteristic indicators of solid fuels - hard coal, lignite, peat. Fuel contaminants and methods of their removal....
-
Green Analytical Chemistry Approaches in Sample Preparation
PublikacjaThis chapter presents environmentally friendly solutions for sample preparation. Attention is focused on extraction techniques and the minimization of organic solvent consumption, as the large quantitiesused in analytical laboratories are a pressing environmental problem. Solventless sample preparation techniques, alternative solvents, mediated extractions are discussed. The principle of each technique isbriefly described, together...
-
Analysis of Airport Runoff Waters
PublikacjaA particularly important facet of airport operation is the impact of the pollution caused byrunoff waters. Runoff waters at an airport may contain relatively high concentrations of differentcontaminants resulting from the various aspects of its operation: de/anti-icing operations,washing and cleaning operations, spills of fuel and lubricants, exhaust fumes, and weed removal.The pollution caused by airport operations affects soil,...
-
Nowe czynniki chłodnicze i zmiany w instalacjach chłodniczych. Cz.2
PublikacjaW drugiej części artykułu kontynuowany jest temat związany z ograniczeniami stosowania syntetycznych czynników chłodniczych. W części pierwszej przedstawiono tendencje do zastępowania wycofywanych substancji czynnikami naturalnymi. Niniejszy artykuł traktuje natomiast o możliwości wykorzystywania nowych, syntetycznych czynników z grupy HFO, będących substancjami bezpiecznymi dla środowiska naturalnego, w kontekście ich wpływu na...
-
Enhanced Toxicity of Bisphenols Together with UV Filters in Water: Identification of Synergy and Antagonism in Three-Component Mixtures
PublikacjaContaminants of emerging concern (CEC) localize in the biome in variable combinations of complex mixtures that are often environmentally persistent, bioaccumulate and biomagnify, prompting a need for extensive monitoring. Many cosmetics include UV filters that are listed as CECs, such as benzophenone derivatives (oxybenzone, OXYB), cinnamates (2-ethylhexyl 4-methoxycinnamate, EMC) and camphor derivatives (4-methylbenzylidene-camphor,...
-
Video Classification Technology in a Knowledge-Vision-Integration Platform for Personal Protective Equipment Detection: An Evaluation
PublikacjaThis work is part of an effort for the development of a Knowledge-Vision Integration Platform for Hazard Control (KVIP-HC) in industrial workplaces, adaptable to a wide range of industrial environments. This paper focuses on hazards resulted from the non-use of personal protective equipment (PPE), and examines a few supervised learning techniques to compose the proposed system for the purpose of recognition of three protective...
-
Cognition and Decisional Experience to Support Safety Management in Workplaces
PublikacjaHazards are present in all workplaces and can result in serious injuries, short and long-term illnesses, or death. In this context, management of safety is essential to ensure the occupational health of workers. Aiming to assist the safety management process, especially in industrial environments, a Cognitive Vision Platform for Hazard Control (CVP-HC) is proposed. This platform is a Cyber Physical system, capable of identifying...
-
COLOUR SYMBOLISM IN FINANCE
PublikacjaColour symbolism plays an important role in everyday life and science. The subject is interdisciplinary and receives significant attention in the literature. It is increasingly entering the field of economics and finance. The authors are the first to research the connotations and symbolism of colours in finance. The following research aims to: identify and determine the meaning of col-ours in connection with the word “finance”,...
-
Working in harmony with nature. Green office buildings in a present-day city
PublikacjaMetropolis - as main point of people's migration, mostly because of work, have to face sustainable development as a strategy for the near future. This article describes possible ways leading to the best office building concepts in the design process. Searching for a workspace in harmony with nature is one of the aspects of a balanced development. The challenge is to create functional, compact, environmentally friendly and healthy...
-
NOWE ŻYCIE DWORCÓW KOLEJOWYCH - MOŻLIWOŚCI MODERNIZACJI OBIEKTÓW OBSŁUGI PASAŻERÓW
PublikacjaW aspekcie współcześnie zachodzących zmian demograficznych, rozwijających się technologii oraz poszukiwania rozwiązań proekologicznych wzrasta potencjał transportu kolejowego. Po okresie upadku znaczenia kolei jesteśmy świadkami jej postępującej transformacji w Europie. Do obsługi ruchu pasażerskiego służy w Polsce prawie 600 dworców kolejowych, z których większość nie jest jeszcze przystosowana do aktualnych potrzeb użytkownika...
-
Hazard Control in Industrial Environments: A Knowledge-Vision-Based Approach
PublikacjaThis paper proposes the integration of image processing techniques (such as image segmentation, feature extraction and selection) and a knowledge representation approach in a framework for the development of an automatic system able to identify, in real time, unsafe activities in industrial environments. In this framework, the visual information (feature extraction) acquired from video-camera images and other context based gathered...
-
Comparative Analysis of Carbon, Ecological, and Water Footprints of Polypropylene-Based Composites Filled with Cotton, Jute and Kenaf Fibers
PublikacjaComposites containing natural fibers are considered environmentally friendly materials which is related to the reduced use of fossil fuels and the emission of carbon dioxide compared to petroleum-based polymers. Nevertheless, a complete evaluation of their environmental impact requires a broader view. This paper presents a carbon, ecological, and water footprints assessment of polypropylene-based composites filled with cotton,...
-
A Comparison of Ammonia Emission Factors from Light-Duty Vehicles Operating on Gasoline, Liquefied Petroleum Gas (LPG) and Compressed Natural Gas (CNG)
Publikacja -
Low Ambient Temperature Cold Start Emissions of Gaseous and Solid Pollutants from Euro 5 Vehicles featuring Direct and Indirect Injection Spark-Ignition Engines
Publikacja -
The Impact of Fuel Ethanol Content on Particulate Emissions from Light-Duty Vehicles Featuring Spark Ignition Engines
Publikacja -
An Investigation into Cold Start Emissions from Compression Ignition Engines using EU Legislative Emissions Test Procedures
Publikacja -
Performance of Particle Oxidation Catalyst and Particle Formation Studies with Sulphur Containing Fuels
Publikacja -
Particulate Emissions from European Vehicles Featuring Direct Injection Spark Ignition Engines Tested Under Laboratory Conditions
Publikacja -
Key activities to improve energy management in DC microgrids connected by urban traction
PublikacjaDC MicroGrids must have Energy Management Systems to guarantee efficient, dependable, and environmentally friendly electricity. The application of Model Predictive Control, proved to be helpful due to its adaptability and capacity to use non-linear models. This paper, based on an extensive literature review, identifies and discusses the three key activities to improve the characteristics of DC MicroGrids, i.e.: the use of Energy...
-
Pro-Ecological Activities in Polish Financial Institutions on the Example of Selected Banks
PublikacjaThe character of the role that banks play in the economy provides them with an opportunity to positively affect the environment on multiple levels. The article aimed at characterizing and evaluating pro-ecological activities occurring in financial institutions in Poland. It compares pro-ecological activities undertaken by three different banks operating on the Polish market: BOŚ Bank SA, BNP Paribas Bank Polska SA and PKO Bank...
-
Agnieszka Ubowska dr hab. inż.
OsobyDr hab. inż. Agnieszka Ubowska, prof. ZUT urodziła się w 1978 r. w Pile, gdzie ukończyła Technikum Ochrony Środowiska. W latach 1998-2003 studiowała na Wydziale Technologii i Inżynierii Chemicznej Politechniki Szczecińskiej na kierunku ochrona środowiska. Stopień doktora nauk technicznych uzyskała w 2008 r., broniąc na Wydziale Technologii i Inżynierii Chemicznej Politechniki Szczecińskiej pracę pt. „Hybrydowe hydrofilowe (ko)polimery...
-
Flexible Knowledge–Vision–Integration Platform for Personal Protective Equipment Detection and Classification Using Hierarchical Convolutional Neural Networks and Active Leaning
PublikacjaThis work is part of an effort to develop of a Knowledge-Vision Integration Platform for Hazard Control (KVIP-HC) in industrial workplaces, adaptable to a wide range of industrial environments. The paper focuses on hazards resulted from the non-use of personal protective equipment (PPE). The objective is to test the capability of the platform to adapt to different industrial environments by simulating the process of randomly selecting...
-
Looking for the Optimal Location of an Eco-District within a Metropolitan Area: The Case of Tricity Metropolitan Area
PublikacjaCompact housing structures located in city centers are considered to be the most energy and environmentally eective, mainly due to the access to services, transport networks and municipal infrastructures. There is the question of why so many of the acknowledged ecological housing complexes are located on the outskirts of cities or suburbs. Numerous cities decide to introduce strategies either to densify city centers, hoping to...
-
Methods of ZnO nanoparticles synthesis
PublikacjaZinc oxide nanostructures are interesting nanomaterials with a wide range of applications. Since the physical and chemical properties of ZnO nanoparticles are influenced both by their shape and size, a control of morphology of ZnO structures is needed for their commercial usage. Different chemical, physical, and biological methods used to produce ZnO nanostructures can be found in the literature. The production of ZnO nanoparticles...
-
Advanced oxidation processes for the removal of mono and polycyclic aromatic hydrocarbons – A review
PublikacjaAromatic hydrocarbons (AHs) are toxic environmental contaminants presented in most of the environmental matrices. Advanced oxidation processes (AOPs) for the removal of AHs in the account of complete mineralization from various environmental matrices have been reviewed in this paper. An in-depth discussion on various AOPs for mono (BTEX) and polyaromatic hydrocarbons (PAHs) and their derivatives is presented. Most of the AOPs were...