Filters
total: 1722
filtered: 1525
displaying 1000 best results Help
Search results for: STABILITY, BANKING SECTOR
-
Resonant Conditions in a Node with an SVC Compensator
PublicationThe primary purpose of installing static shunt compensators in power grids is to improve the voltage conditions. Additional reactive power sources increase the system’s voltage stability and enable faster system recovery after a voltage failure. This paper presents the impact of an SVC device’s structure and settings on impedance change in the supply system, and hence on the frequencies at which resonance phenomena can develop.
-
Elastic distortional buckling of thin-walled bars of closed quadratic cross-section
PublicationIn this study a tin-walled bar with closed quadratic cross-section is considered. The elastic stability of axially compressed bar related to the cross-section distortion is investigated. The governing differential equatio is derived with aid of the principle of stationary potential energy. The critical load for simply supported bar is found in an analytical form and it is copared with the FEM solution. Sufficient accuracy of the...
-
Nickel phase deposition on V2CTx/V2AlC as catalyst precursors for a dry methane reforming: The effect of the deposition method on the morphology and catalytic activity
PublicationDry reforming of methane (DRM) is a promising alternative technology for the production of syngas with simultaneous utilization of two main greenhouse gases (CH4, CO2). However, DRM technology is still an industrially immature process due to the lack of stable and active catalyst. Therefore, the search for new catalytic materials is of great research interest. Recently, MAX and MXenes materials are increasingly being tested as...
-
Molecular dynamics simulations of the affinity of chitin and chitosan for collagen: the effect of pH and the presence of sodium and calcium cations
PublicationChitosan and chitin are promising biopolymers used in many areas including biomedical applications, such as tissue engineering and viscosupplementation. Chitosan shares similar properties with hyaluronan, a natural component of synovial fluid, making it a good candidate for joint disease treatment. The structural and energetic consequences of intermolecular interactions are crucial for understanding the biolubrication phenomenon...
-
A green route for high-performance bio-based polyurethanes synthesized from modified bio-based isocyanates
PublicationThe need for sustainability and a circular economy leads to the development of innovative greener materials and technologies. This paper is focused on a novel class of bio-based polyurethanes (PUs) synthesized with the use of bio-monomers including bio-based isocyanates. The novelty of this work is related to the usage of bio-based modified isocyanate via a two-step solvent-free synthesis of novel cast bio-based poly(ester-urethanes)...
-
Silver(I) complexes with nitrile ligands: New materials with versatile applications
PublicationIn the present study, the structure, thermal stability, conductive properties, and antimicrobial activity of silver(I) complexes with nitrile ligands were investigated. For the construction of the materials, 2-cyanopyridine (2-cpy), 4-cyanopyridine (4-cpy), 1,2-dicyanobenzene (1,2-dcb), and 1,3-dicyanobenzene (1,3-dcb) were used in addition to the silver nitrite and nitrate. Four new compounds were isolated and structurally characterized:...
-
A literature survey of the influence of preform reheating and stretch blow moulding with hot mould process parameters on the properties of PET containers – part 2.
PublicationThe hot fill process is an inexpensive conventional filling technology for high-acidity products (pH < 4.5). It allows certain drinks (sensitive beverages such as fruit and vegetable juices, nectars, soft drinks, vitaminised water) to be stored at ambient temperature without the need for chemical preservatives. The primary feature of the bottles used in the hot fill process is their temperature stability, i.e. the ability to retain...
-
A literature survey of the influence of preform reheating and stretch blow molding with hot mold process parameters on the properties of PET containers. Part I.
PublicationThe hot fill process is an inexpensive conventional filling technology for high-acidity products (pH < 4.5). It allows certain drinks (sensitive beverages such as fruit and vegetable juices, nectars, soft drinks, vitaminized water) to be stored at ambient temperature without the need for chemical preservatives. The primary feature of the bottles used in the hot fill process is their temperature stability, i.e. the ability to retain...
-
Silicon oxycarbide-tin nanocomposite derived from a UV crosslinked single source preceramic precursor as high-performance anode materials for Li-ion batteries
PublicationIn this work, we report an innovative and facile UV light-assisted synthesis of a nanocomposite based on silicon oxycarbide (SiOC) and tin nanoparticles. SiOC ceramic matrix, containing a conductive free carbon phase, participates in lithium-ion storage, and buffers the volume changes of Li-alloying/de-alloying material. The reported synthesis procedure through a polymer-derived ceramic route involves the preparation of a single-source...
-
Structure, Mechanical, Thermal and Fire Behavior Assessments of Environmentally Friendly Crude Glycerol-Based Rigid Polyisocyanurate Foams
PublicationIn this work, rigid polyisocyanurate foams were prepared at partial substitution (0–70 wt%) of commercially available petrochemical polyol, with previously synthesized biopolyol based on crude glycerol and castor oil. Influence of the biopolyol content on morphology, chemical structure, static and dynamic mechanical properties, thermal insulation properties, thermal stability and flammability was investigated. Incorporation of...
-
Study of the effect of thermally reduced graphene oxide on the physical and mechanical properties of flexible polyurethane foams
PublicationFlexible polyurethane foams were obtained from a two-component system via the one-step method. The foams were modified with thermally reduced graphene oxide added in the amount equal to 0.25, 0.5 and 0.75 wt%. The morphology, static and dynamic properties, and thermal stability of modified foams were determined. The application of carbon filler resulted in the visible increase in the cell size, apparent density and rigidity of...
-
Nonlinear finite element modeling of vibration control of plane rod-type structural members with integrated piezoelectric patches
PublicationThis paper addresses modeling and finite element analysis of the transient large-amplitude vibration response of thin rod-type structures (e.g., plane curved beams, arches, ring shells) and its control by integrated piezoelectric layers. A geometrically nonlinear finite beam element for the analysis of piezolaminated structures is developed that is based on the Bernoulli hypothesis and the assumptions of small strains and finite...
-
Production of new non-matrix reference material of ethene
PublicationThe main objective of the research is to produce new non-matrix reference materials of ethene. The study are based on thermal decomposition of surface compound chemically bonded with the surface of glass fibers coated with thin layer of aluminum. Positivehomogeneity test, stability test and organization of inter-laboratory comparison are leading to find new non-matrix reference materials which are indispensable tools in the analysis...
-
Enzyme immobilization on magnetic nanoparticles
PublicationImmobilized enzymes have been commonly used in many branches of industry, biotechnology, medicine and also in analytical chemistry. Their use provides many advantages in comparison with free enzymes including repeated, easy recovery of the enzyme and improvement in enzyme stability. Enzymes are strong and specific catalysts, but are also expensive and fragile. Their immobilization and stabilization may reduce reaction costs, which...
-
Distortional buckling of thin-walled columns of closed quadratic cross-section
PublicationThe elastic stability of axially compressed column related to the cross-section distortion is investigated. Two kinds of closed quadratic cross-sections are taken into consideration with internal walls and without it. The governing differential equation is derived with aid of the principle of stationary total potential energy. The critical loads for the simply supported columns are found in an analytical form and compared with...
-
STARZEJĄCY SIĘ PRZEDSIĘBIORCA W POLSCE I NA ŚWIECIE
PublicationPoniższy artykuł wskazuje na rosnącą liczbę przedsiębiorców w wieku okołoemerytalnym, tak w krajach europejskich, w tym w Polsce, jak i w USA. Wzrost ten wynika zarówno z rosnącej liczby osób w tej grupie wiekowej, które zakładają swoje firmy, jak i z rosnącej liczby osób, które prowadząc od wielu lat swoje firmy, nie zamierzają przejść na emeryturę. Z nielicznych badań wśród osób starszych prowadzących własne firmy wynika, że...
-
On mixing in the class of quadratic stochastic operators
PublicationWe study different types of limit behavior of quadratic stochastic operators acting on ℓ^1 (or ℓ^1_d) spaces in both strong and uniform topologies. The main motif of the paper is to express the uniform and strong asymptotic stability of the quadratic stochastic operator in terms of convergence of the associated (linear) nonhomogeneous Markov chain. We also examine which type of uniform convergence of iterates of the quadratic...
-
Influence of the shoe type on the ground reaction forces
PublicationThe aim of this work was to estimate a relationship between the type of the footwear and ground reactions. Differences in medio-lateral, anterior-posterior and vertical reactions are compared for different shoe-types for male and female volunteers. Each of the participants gait was recorded in case of different shoes and without them, also stabilograms were analyzed. Results revealed differences in ground reaction forces for different...
-
The added value of using the HEPA PAT for physical activity policy monitoring: a four-country comparison
PublicationBackground Public policy is increasingly recognized as an important component of physical activity promotion. This paper reports on the current status of physical activity policy development and implementation in four European countries based on the Health-Enhancing Physical Activity Policy Audit Tool (HEPA PAT) developed by WHO. It compares the findings to previous studies and discusses the general utility of this tool and its...
-
Economic Vitality of Polish Suburbs
PublicationFor over 25 years, Poland has been undergoing major political, social and economic transformations. The country's system changed from a planned economy to a free-market, neo-liberal one. The effects of these changes are visible on several levels, including the field of urban planning, where they manifested themselves as the birth of the suburbanization process. In the field of economics, it could be noticed that since 1989, the...
-
DETERMINANTY WZROSTU POLSKIEGO EKSPORTU PRZEMYSŁU PRZETWÓRCZEGO – ANALIZA DŁUGOOKRESOWA
PublicationGłównym celem artykułu było określenie determinant eksportu polskiego przemysłu przetwórczego na podstawie danych pochodzących z 13 podsekcji przetwórstwa przemysłowego wyodrębnionych zgodnie z NACE 1.1. Analiza z wykorzystaniem modelu ECM objęła lata 1995–2011 i została przeprowadzona dwutorowo – dla całej sekcji przemysłu przetwórczego oraz dla poszczególnych jego podsekcji. Autorki zbadały, jak popyt zagraniczny, popyt krajowy,...
-
Innowacja urbanistyczna w kontekście kształtowania środowiska mieszkaniowego
Publication.
-
Microplastics removal from aqueous environment by metal organic frameworks
PublicationThis paper provides an overview of recent research performed on the applications of metal–organic frameworks (MOFs) for microplastics (MPs) removal from aqueous environments. MPs pollution has become a major environmental concern due to its negative impacts on aquatic ecosystems and human health. Therefore, developing effective and sustainable methods for removing them from aqueous environments is crucial. In recent years, MOFs...
-
Thermal buckling of functionally graded piezomagnetic micro- and nanobeams presenting the flexomagnetic effect
PublicationGalerkin weighted residual method (GWRM) is applied and implemented to address the axial stability and bifurcation point of a functionally graded piezomagnetic structure containing flexomagneticity in a thermal environment. The continuum specimen involves an exponential mass distributed in a heterogeneous media with a constant square cross section. The physical neutral plane is investigated to postulate functionally graded material...
-
Ship weather routing optimization with dynamic constraints based on reliable synchronous roll prediction
PublicationShip routing process taking into account weather conditions is a constrained multi-objective optimization problem and it should consider various optimization criteria and constraints. Formulation of a stability-related, dynamic route optimization constraint is presented in this paper. One of the key objectives of a cross ocean sailing is finding a compromise between ship safety and economics of operation. This compromise should...
-
A framework for onboard assessment and monitoring of flooding risk due to open watertight doors for passenger ships
PublicationPost-accident safety of ships is governed by damage stability, affected by watertight subdivisions which limit accidental flooding. This is important for passenger ships with watertight doors (WTDs) often fitted in the bulkheads. Awareness of the ship flooding risk due to open WTDs and the conditions under which the associated risk level changes are prerequisites for proactive risk mitigation. Accident risk is often expressed as...
-
Giant Reed (Arundo donax L.) Fiber Extraction and Characterization for Its Use in Polymer Composites
PublicationThis work describes an extraction method for giant reed fibers from stems and leaves based on chemical soaking and crushing through a rolling mill. Obtained fibers, together with the shredded plant (stems + leaves), are characterized in terms of chemical composition, thermal stability, morphology, and crystallinity. Mechanical properties of fibers have also been assessed (single fiber tensile tests). The results show that the proposed...
-
Extraction and evaluation of gas-flow-dependent features from dynamic measurements of gas sensors array
PublicationGas analyzers based on gas sensors are the devices which enable recognition of various kinds of volatile compounds. They have continuously been developed and investigated for over three decades, however there are still limitations which slow down the implementation of those devices in many applications. For example, the main drawbacks are the lack of selectivity, sensitivity...
-
Ternary Bismuthide SrPtBi2: Computation and Experiment in Synergism to Explore Solid-State Materials
PublicationA combination of theoretical calculation and the experimental synthesis to explore the new ternary compound is demonstrated in the Sr–Pt–Bi system. Because Pt–Bi is considered as a new critical charge-transfer pair for superconductivity, it inspired us to investigate the Sr–Pt–Bi system. With a thorough calculation of all the known stable/metastable compounds in the Sr–Pt–Bi system and crystal structure predictions, the thermodynamic...
-
Historical crane on the redesigned original trestle bridge as a memorial of Gdansk Shipyard
PublicationThe paper includes selected aspects of the study, whose goal is to hold the historical crane 642-24 in its current location after the modification of trestle bridge static scheme. The scope of the paper includes the assessment of current technical condition of the object, a presentation of FEM analyses, a description of the assumed load cases, results of the static calculations, checking the effort of construction elements, global...
-
UE ETS: an in-depth descriptive analysis.
PublicationThe European Emission Trading System (EU ETS) plays a pivotal role in the EU’s strategy to address climate change, serving as a fundamental instrument for cost-effective reduction of greenhouse gas emissions. Notably, it inaugurated the word’s first major carbon market and it continues to the largest one. Chapter 1 provides an in-depth examination of the EU ETS, spanning from its inception in 2005 to 2020. After providing a descriptive...
-
LEAN MANAGEMENT IN HIGHER EDUCATION INSTITUTIONS. HOW TO BEGIN?
PublicationThe objective of this article is to present an outline of a concept aimed at identifying the possibilities of using Lean Management foundations in determining the sources of irregularities occurring in university processes from the perspective of various stakeholder groups. A research methodology is presented that creates the basis for initiating programmes modernising university processes in line with the principles of the LM...
-
Potential of Polish R&D industry in the context of prototyping, design, development and control of a dedicated national satellite SAR system for marine ecosystem monitoring. Technical paper - preliminary study
Publicationpace technology is currently one of the most important elements in the advance of information societies and knowledge-based economies all over the world. The European Space Agency (ESA) is in the focal point of European space activities, while the European Union provides strong financial support for the development of space technologies and applications in its flagship programs. In a domestic scope, the Polish Space Agency (POLSA)...
-
Methods of liquid biofuels production - the bioethanol example.
PublicationEthanol is used in chemical and food industry, mainly either in the synthesis or as a solvent. The newest application of ethanol is as a fuel. This alcohol, produced on an industrial scale from crop waste, is widely known under the name bioethanol. It could be used as a fuel by itself or in a mixture with gasoline. Today, there are several technologies for bioethanol production known. The relatively simple method of obtaining bioethanol...
-
METHODS OF LIQUID BIOFUEL PRODUCTION – THE BIOETHANOL EXAMPLE
PublicationEthanol is used in chemical and food industry, mainly either in the synthesis or as a solvent. The newest application of ethanol is as a fuel. This alcohol, produced on an industrial scale from crop waste, is widely known under the name bioethanol. It could be used as a fuel by itself or in a mixture with gasoline. Today, there are several technologies for bioethanol production known. The relatively simple method of obtaining bioethanol...
-
Selected Aspects of Biofuels Market and the Electromobility Development in Poland: Current Trends and Forecasting Changes
PublicationThis work presents basic information associated with markets of selected alternative fuels used in transport, such as methyl esters, conventional bioethanol and lignocellulosic bioethanol, and the market of electrical vehicles. Legal conditions, which stimulate development and regulate the mode of functioning of the liquid biofuel market until 2020 are discussed, based on provisions of EU directives. Data on biofuel production...
-
Inverse and forward surrogate models for expedited design optimization of unequal-power-split patch couplers
PublicationIn the paper, a procedure for precise and expedited design optimization of unequal power split patchcouplers is proposed. Our methodology aims at identifying the coupler dimensions that correspond to thecircuit operating at the requested frequency and featuring a required power split. At the same time, thedesign process is supposed to be computationally efficient. The proposed methodology involves two typesof auxiliary models (surrogates):...
-
REALIZACJA USŁUGI DSR NA PRZYKŁADZIE DOMÓW JEDNORODZINNYCH
PublicationW artykule przedstawiono ideę usługi DSR, czyli reakcji strony popytowej, dla odbiorców rozproszonych. Polega ona na zmniejszeniu zapotrzebowania na energię elektryczną lub przesunięcia go w czasie. Wdrożenie usługi może w znaczny sposób wpłynąć na pracę systemu elektroenergetycznego – usługa DSR może wspomóc bilansowanie systemu elektroenergetycznego, a także pozytywnie oddziaływać na jego elastyczność, wydajność oraz stabilność....
-
Rigid polyurethane foams with different flame retardants and their physical and mechanical properties
PublicationRigid polyurethane foams (PUFs) containing 3, 6 or 9 % of one of of two selected fire retardants (FR): oligomeric ethyl ethylene phosphate (Fyrol PNX) and expandable graphite (EG) were prepared, inspected and compared to foam without that fillers as the control. The thermal stability of PUFs was described by horizontal test according to norm: UL 94 HB. Compressive strength and physical properties (density, fragility and water absorption)...
-
State Observer for Doubly-fed Induction Generator
PublicationIn the paper a new state observer for doubly-fed generator has been proposed. In the new approach an extended mathematical model of the doubly fed generator is used to form equations of the introduced z type observer. Stability of the observer has been verified through poles placement analyses. The active and reactive powers of the generator are controlled by a nonlinear multiscalar control method. Simulation and experimental results...
-
DiSTFAG method robust to gross errors in monitoring displacements and strains in unstable reference systems
PublicationThe DiSTFA method (Displacements and Strains using Transformation and Free Adjustment) was presented in Kamiński (2009). The method has been developed for the determination of displacements and strains of engineering objects in unstable reference systems, as well as for examining the stability of reference points. The DiSTFAG (Gross errors) method presented in the paper is the extension of the DiSTFA method making it robust to...
-
Dynamics of a simplified HPT model in relation to 24h TSH profiles
PublicationWe propose a simplified mathematical model of the hypothalamus-pituitary-thyroid (HPT) axis in an endocrine system. The considered model is a modification of the model proposed by Mukhopadhyay and Bhattacharyya in [10]. Our system of delay differential equations reconstructs the HPT axis in relation to 24h profiles of human in physiological conditions. Homeostatic control of the thyroid-pituitary axis is considered by using...
-
Self-organized multilayered graphene-boron doped diamond hybrid nanowalls for high performance electron emission devices
PublicationCarbon nanomaterials like nanotubes, nanoflakes/nanowalls and graphene have been used as electron sources due to their superior field electron emission (FEE) characteristics. Nevertheless, these materials show poor stability and a short lifetime, preventing them from being used in practical device applications. The intention of this study was to find an innovative nanomaterial, possessing both high robustness and reliable FEE behavior....
-
Effects of La0.8Sr0.2MnO3 and Ag electrodes on bismuth-oxide-based low-temperature solid electrolyte oxygen generators
PublicationIn this study, La0.8Sr0.2MnO3 (LSM) was used as the ceramic electrode in a (Bi1.50Y0.50)0.98Zr0.04O3+δ (BYO)-based solid electrolyte oxygen generator (SEOG) and its performance was compared with that of a previously studied high-fire Ag electrode. Among La0.6Sr0.4Co0.2Fe0.8O3, LaNi0.6Fe0.4O3, Cu1.4Mn1.6O4, and LSM materials, only LSM materials did not trigger any chemical reaction or interdiffusion with BYO at temperatures up to...
-
ЭКОНОМИЧЕСКИЕ КОНТАКТЫ АЗЕРБАЙДЖАНА И ЕВРОПЕЙСКОГО СОЮЗА
PublicationПосле получения независимости в начале 90-х годов XX в. Республика Азербайджан подписала более пятидесяти договоров с международными организациями. В 1991 г. государство установило контакты с Европейским союзом в ходе реализации проектов в рамках программы TACIS, предназначенной для стран СНГ. Экономические контакты между партнерами активизировались, благодаря подписанию и вступлению в силу в 1999 г. Соглашения о партнерстве и...
-
Enzymatic and Chemical Cross-Linking of Bacterial Cellulose/Fish Collagen Composites—A Comparative Study
PublicationThis article compares the properties of bacterial cellulose/fish collagen composites (BC/Col) after enzymatic and chemical cross-linking. In our methodology, two transglutaminases are used for enzymatic cross-linking—one recommended for the meat and the other proposed for the fish industry—and pre-oxidated BC (oxBC) is used for chemical cross-linking. The structure of the obtained composites is characterized by scanning electron...
-
Application of soil nailing technique for protection and preservation historical buildings
PublicationSoil nailing is one of the recent in situ techniques used for soil improvement and in stabilizing slopes. The process of soil nailing consists of reinforcing the natural ground with relatively small steel bars or metal rods, grouted in the pre-drilled holes. This method has a wide range of applications for stabilizing deep excavations and steep slopes. Soil nailing has recently become a very common method of slope stabilisation...
-
Influence of silver-core gold-shell nanoparticle parameters on the variation of surface-enhanced Raman spectra
PublicationThe detection of molecules by surface-enhanced Raman spectroscopy (SERS) is dependent on the nanomaterial used to induce the enhancement effect. This depends on a variety of parameters of the substrate such as the metal used for their creation, their shape, size and size distribution, concentration, as well as the parameters of the solution, such as packing of the nanoparticles, the complexity of the sample, the solvent, etc. It...
-
Investigation of Thermoplastic Polyurethanes Synthesized via Two Different Prepolymers
PublicationThe man aim of this work was to investigate the effect of the molecular weight of polyols, mixture of prepolymers, and [NCO]/[OH] molar ratio used during the prepolymer chain extending step on the chemical structure, thermomechanical and mechanical properties, and thermal stability of thermoplastic poly(ether-urethane)s In this work thermoplastic poly(ether-urethane)s were synthesized by using polyols with a various molecular weight,...
-
Viability of fruit seed oil O/W emulsions in personal care products
PublicationThe use of fruit seed oils in personal care products is of significance to both their function and image. Poland is an important processor of fruit products within the EU, and thus has a large availability of seeds from domestic fruits, which are normally considered to be a waste material or feed for livestock. Unfortunately, current literature is scarce of the suitability of these oils for topical dermatological use in the form...