Search
Search results for: HYDROSTATIC DRIVES, OFFSHORE INDUSTRY, OFFSHORE EQUIPMENT PROJECTS
-
Displacement control in PWK-type pumps
PublicationThe most important, strategic goal however is creation of the variable displacement version of the new pump PWK. Thanks to full discharge of it's commutation mechanism from hydrostatic forces the variable pump can be directly controlled by low-energy actuator like proportional electromagnet or stepping motor. It means that costly and complicated hydraulic servomechanism (applied in all present variable displacement pumps) is no...
-
Mobile inventory system for hydrotechnical objects using data from multiple sensors operating simultaneously
PublicationThe knowledge of the location, shape and other characteristics of spatial objects in the coastal areas has a significant impact on the functioning of ports, shipyards, and other water-infrastructure facilities, both offshore and inland. Therefore, measurements are taken of the underwater part of the waterside zone, which means the bottom of water and other underwater objects (e.g. breakwaters, docks, etc.), and objects above the...
-
Modernized cathodic protection system for legs of the production rig – Evaluation during ten years of service
PublicationThe modernization of cathodic protection system of the Baltic Beta platform legs is described. It was that the sacrificial anodes cone-shaped groups were to be placed on the seabed at a depth of 80 m. The measurements results of cathodic protection effectiveness during its ten-years operation are presented. The effectiveness was assessed based on the potential value along the entire length of the legs from the sea surface to the...
-
Start-up of a power unit of a thermal power plant auxiliary systems with supply from a hydropower plant
PublicationThis article discusses the issues related to a power unit of a thermal power plant start-up with the use of a hydropower plant. Hydropower plant can supply and will enable start-up of auxiliary equipment in a power unit of a thermal power plant. Due to high capacity of auxiliary drives, start-up of auxiliaries in a thermal power plant after blackout (and boiler shutdown) is not possible from emergency energy sources in the power...
-
Autonomous Battery Drive in Trolleybuses: an Overview of Practical Examples
PublicationBattery electric buses are believed to be means of transportation of the future. However, despite the continuous development of electrochemical batteries technology and the multitude of electric buses on offer, it is still no proved solutions that can be widely used. Charging is the one of the weakness point of the electric buses. Trolleybuses are alternative for them. Especially, trolleybuses equipment with traction batteries...
-
Software Factory project for enhancement of student experiential learning
PublicationProviding opportunities for students to work on real-world software development projects for real customers is critical to prepare students for the IT industry. Such projects help students to understand what they will face in the industry and experience real customer interaction and challenges in collaborative work. To provide this opportunity in an academic environment and enhance the learning and multicultural teamwork experience,...
-
Temper bead welding of S460N steel in wet welding conditions
PublicationWet welding is the most common method of welding in water environment. It is most often used for repairing of underwater parts of offshore structures. However, the water as a welding environment causes an increase of susceptibility of steels to cold cracking. For underwater constructions high strength low alloy (HSLA) steel are widely used. In wet welding condition a HSLA steel is characterized by high susceptibility to cold cracking....
-
Center for Scientific and Technical Information - Library Services for Business and Science at Wroclaw University of Technology
PublicationWroclaw University of Technology is situated in Lower Silesia – the dynamically developing region of Poland. Focusing on adopting its own offer to the market needs had been selected as a strategy. Due to that, a synergy effect has been achieved with the development of segments strategic for the region. The University is strongly oriented to cooperation with the economy and industry. One of the key initiatives was establishment...
-
Mussa Yussuf Khamis PhD in Chemical Science
People -
New oryginal generic technologies: A Polish R&D strategic implementation programme
PublicationPolands's pharmaceutical industry is of great significance to the whole economy. According to Forbs (2 October 2012), the cost of launching a new drug varies from USD 1 to 11 bilion. There is little Chance of a Polish pharmaceutical company developing an original drug due to financial reason.Many research teams in Poland take up research projects aimed at new biologically active compounds. But such an objective has no broader perspective,...
-
System sejsmiki refleksyjnej do poszukiwania morskich złóż węglowodorowych
PublicationW poszukiwaniu morskich złóż węglowodorowych wykorzystywane są różne metody zaliczane do tzw. sejsmiki refleksyjnej. Jedną z nich jest wykorzystanie systemu sejsmiki refleksyjnej holowanego za statkiem specjalistycznym przeznaczonym do badań sejsmicznych. Jest to złożony ruchomy układ techniczny składający się z wielu elementów składowych, takich jak: system wzbudzania fal akustycznych, system rejestracji odbijanych fal akustycznych...
-
The influence of the carbon equivalent on the weldability of high-strength low-alloy steel in the water environment
PublicationFrom many years, the high strength low alloy steels are often used for offshore constructions. This constructions, due to the environment in which they work, require more frequent repairs than the constructions from the land. For economic reasons, repairs take place in the underwater conditions, however water significantly decreases the weldability of steel. The paper presents the results of the CTS weldability test for S460ML...
-
Toward a Method Evaluating Control Actions in STPA-Based Model of Ship-Ship Collision Avoidance Process
Publication -
A Study of the Roll Motion by Means of a Free Decay Test
Publication -
Integrated acoustical-optical system for inventory of hydrotechnical objects
PublicationThe knowledge of the location, shape and other characteristics of spatial objects in the coastal areas has a significant impact on the functioning of ports, shipyards, and other waterinfrastructure facilities, both offshore and inland. Therefore, measurements of the underwater part of the waterside zone are taken, which means the bottom of the water and other underwater objects (e.g. breakwaters, docks, etc.), and objects above...
-
DIRECTIONS OF THE SCIENTIFIC RESEARCH CONDUCTED IN THE DEPARTMENT OF MARINE AND POWER PLANTS OF THE FACULTY OF OCEAN ENGINEERING AND SHIP TECHNOLOGY OF THE GDANSK UNIVERSITY OF TECHNOLOGY
PublicationIn this article the short historical outline of the Department of Marine and Land Power Plants of the Faculty of Ocean Engineering and Ship Technology of the Gdansk University of Technology was introduced. Its activity beginnings, in the post-war history of the University, reach 1952. The leading scientific issues, which have been developed for years in three principal directions: design, manufacture and operation of machines and...
-
Case Study on the Use of Unmanned Aerial Vehicles for the Maintenance of Ocean Engineering Facilities
PublicationThe article presents the concept of using innovative unmanned aerial vehicles (UAVs), including autonomous UAV-I for inspection activities, auxiliary and transport works in the processes of servicing large-scale ocean engineering structures in the offshore part of the sea. The proposed areas of application of UAV-I devices and key technologies determining the possibility of using these vehicles in difficult operating conditions...
-
Wykorzystanie obszarów morskich pod zabudowę o przeznaczeniu wielofunkcyjnym
PublicationW artykule opisano możliwości zagospodarowania obszarów wodnych na potrzeby rozwoju obszarów miejskich. W kontekście obecnych uwarunkowań ekologicznych oraz bogactwa zasobów obszarów wodnych budownictwo wielofunkcyjne na wodzie ma duże szanse na rozwiązanie problemów dotyczących braku przestrzeni na lądzie. Wiąże się to z rozszerzeniem tradycyjnego podejścia stosowanego przy projektowaniu o elementy związane ze specyfiką konstrukcji...
-
Radosław Drozd dr inż.
PeopleRadosław Drozd - Practice and long-time manager of engineering management and engineering logistics. He graduated from the Faculty of Management and Economics of the PG in the specialty of Production Systems Organization. His scientific and research interests include the design and improvement of production and logistics systems, as well as the development of innovative products. By participating or conducting projects in many...
-
Scientific research in the Department of Machine Design and Automotive Engineering
PublicationShort descriptions of various research subjects taken up at the Department of Machine Design and Automotive Engineering are included in the paper. The subjects cover a wide range of bearing systems and tribology research and the research on tires and road surfaces. A third field of activity is biomedical engineering – with the attempts to improve methods of modelling biological materials in FEM calculations. The Department has...
-
Improvement of S355G10+N steel weldability in water environment by Temper Bead Welding
PublicationThe normalized S355G10 + N steel was chosen for testing, it is used in a variety of applications including the building of offshore structures, which may require repairs in water environment. The main aim of the work was to check susceptibility to cold cracking for fillet welds – Controlled Thermal Severity (CTS) tests and butt welds – Tekken tests and in the next step evaluation of effectiveness of Temper Bead Welding (TBW) application...
-
Probabilistic Methods in Reliability Assessment of Engineering Lightweight Structures
PublicationThe paper considers the probability-based analysis of structural safety measures. Two different numerical examples of representative lightweight structures are considered – a submerged truss tower supporting an offshore platform, and an overhead power line support truss tower. On the basis of these examples, the importance of a motivated selection of analysis method and a proper choice of the number of important variables is shown....
-
Strucutral steel - tensile test results
Open Research DataModern floating structures such as ships, oil platforms and offshore wind towers are built mostly of structural steel. It is a material that is subject to requirements which, when met, allows the construction and safe operation of the structure throughout its entire work cycle. One of the basic criteria that a material must meet is its strength. The...
-
Innovative management of IT projects with the use of the agent-based approach on the basis of intelligent agents
PublicationProject management is one of the major challenges for the modern economy. Dynamic changes in the structures of organizations which form the core of the economy imply changes in both management processes and structures. One element of these changes is a new approach to the manufacturing of modern and rapidly changing products (due to changing market requirements). As part of these changes, traditional organizational structures are...
-
Project-Based Collaborative Research and Training Roadmap for Manufacturing Based on Industry 4.0
PublicationThe importance of the economy being up to date with the latest developments, such as Industry 4.0, is more evident than ever before. Successful implementation of Industry 4.0 principles requires close cooperation of industry and state authorities with universities. A paradigm of such cooperation is described in this paper stemming from university partners with partly overlapping and partly complementary areas of expertise in manufacturing....
-
Technology Concept of TLP Platform Towing and Installation in Waters with Depth of 60 m
PublicationThe article is part of the design and research work conducted at the Gdansk University of Technology, Faculty of Ocean Engineering and Ship Technology, in cooperation with a number of other research centres, which concerns offshore wind farms planned to be built in the Polish zone of the Baltic sea in the next years. One of most difficult tasks in this project is building suitable foundations for each power unit consisting of a...
-
Path dependence, modularity and the offshoring of (some) physician services
PublicationThis paper integrates ideas from modularity and path dependency to explain the potential for and limitations of the offshoring of high value added physician services. While not all medical services are amenable to offshoring, a growing number of physician activities can be viewed as modular components which, at least technically, could be performed remotely. As a result, the presumption that concerns for efficiency dictate how...
-
Application of advanced CFD simulations in seakeeping analysis of ships (case study)
PublicationThe novel design process of many types of ships needs estimation of seakeeping properties. Especially ships like Offshore Supply Vessels, Wind Farm Support Vessels, Research Vessels, ferries, military vessels, rescue vessels require extended analysis of ship behavior on rough sea. The main reason for improving ships operability in different sea conditions is need of rising efficiency of propulsion system, reducing hull added resistance,...
-
Molybdenum-uranium-vanadium geochemistry in the lower Paleozoic Alum Shale of Scandinavia: Implications for vanadium exploration
PublicationThis paper investigates the hyper-enrichments of molybdenum (Mo), uranium (U), and vanadium (V) in the lower Paleozoic, Alum Shale of Denmark, Sweden, Norway, and Estonia. Molybdenum and U are mainly associated with organic matter and the highest contents are found in the Furongian part of the Alum Shale. This Furongian hyper-enrichment of Mo and U commenced with the Steptoean Positive Carbon Isotope Excursion (SPICE) event. The...
-
Bead-on-Plate Underwater Wet Welding on S700MC Steel
PublicationThe participation of high strength steels in marine and offshore structures is increasing, which makes it necessary to develop recommendations for underwater repair welding works. The article presents the results of bead-on-plate welded specimens made of S700MC high strength steel in underwater wet welding conditions by covered elec- trodes. Three specimens with heat input values in the range 0.91-1.05 kJ/mm were made. The specimens...
-
Wpływ wielkości równoważnika węgla na spawalność stali o podwyższonej wytrzymałości w środowisku wodnym
PublicationZ roku na rok coraz większe zastosowanie na konstrukcje offshore znajdują stale o podwyższonej wytrzymałości. Konstrukcje takie, ze względu na środowisko, w którym pracują wymagają częstszych napraw, niż w przypadku konstrukcji lądowych. Ze względów ekonomicznych naprawy odbywają się w warunkach podwodnych, jednakże woda znacząco pogarsza spawalność stali. W pracy przedstawiono wyniki próby spawalności CTS dla stali S460ML i S460N,...
-
Ewa Klugmann-Radziemska prof. dr hab.
PeopleEwa Klugmann-Radziemska graduated from the University of Gdansk with a degree in physics, and since 1996 has been associated with the Gdansk University of Technology, when she began PhD studies. Currently, he is a professor at the Faculty of Chemistry at the Gdansk University of Technology, since 2006 head of the Department of Chemical Apparatus and Machinery. In the years 2008–2016 she was the Vice-Dean for cooperation and development,...
-
Wykład otwarty Mateusza Tredera
EventsCMEW PG serdecznie zaprasza po wakacyjnej przerwie na wykład otwarty Mateusza Tredera pt. „Technologie cyfrowe w przemyśle offshore wind – rzeczywistość, przyszłość czy buzzword?”.
-
Application development for Android, iOS and BlackBerry mobile platforms
PublicationMobile devices, along with dedicated operating systems, have become a substantial and rising trend in software development. Computer industry has significantly changed in order to fulfil the needs of this new segment of the market. Authors have participated in projects, which involved programming on Android, iOS and BlackBerry operating systems. In this paper the most popular mobile platforms (and multiplatform Unity3D environment)...
-
DETERMINATION OF ADDITIONAL TENSION IN TOWED STREAMER CABLE TRIGGERED BY COLLISION WITH UNDERWATER MOVING OBJECT
PublicationThe paper deals with issues connected with the behaviour of a streamer cable towed by a survey seismic vessel when the cable undergoes a strike triggered by collision with an underwater moving object. The consequences of such collisions may be both threat to the life of marine animals or damage to underwater units and large economic losses suffered by vessel owners. The risk of such collisions has increased over the last years...
-
Nondestructive corrosion degradation assessment based on asymmetry of guided wave propagation field
PublicationThe article presents the results of numerical and experimental investigation of guided wave propagation in steel plates subjected to corrosion degradation. The development of novel procedures allowing for the assessment of the corrosion degradation level is crucial in the effective diagnostics of offshore and ship structures that are especially subjected to aggressive environments. The study’s main aim is to investigate the influence...
-
Towards an Understanding of the Stability Assessment of Floating Buildings
PublicationOne of the most important aspects of the design of floating facilities such as ships, floating offshore structures or floating houses is stability. Its impact on both general safety and operational aspects renders it a fundamental consideration already in preliminary design stages. Usually, the concept of sufficient stability of floating buildings is associated with the ability to keep an allowed heel angle and residual freeboard,...
-
Janusz Nieznański prof. dr hab. inż.
PeopleJanusz Nieznański born in 1957 in Gdańsk. He received the M.Sc. degree in 1981, the Ph.D. degree in 1990, and the D.Sc. (‘habilitation’) degree in 1999, all from the Gdańsk University of Technology. Since 1981 he has been with the above university, where he is currently Professor of Electrical Engineering. His research and teaching interests include control, diagnostics, modeling and simulation of power electronic converters and...
-
Digitalization of Building Site Management in the Construction Industry
PublicationWith Industry 4.0, a digital transformation has started in the construction industry. However, 4.0 technologies have difficulties in the integration of digital systems due to the diversity and complexity of the processes in the construction industry. Multidisciplinary work in architectural projects and the need for high productivity require digital renovation planning in the construction industry. The application of the technologies...
-
The influence of IT-competency dimensions on job satisfaction, knowledge sharing and performance across industries
PublicationPurpose – Technology makes knowledge management easier. Knowledge sharing is essential for organizational development. Job satisfaction fosters knowledge sharing. Hence, this study aims to develop an understanding of the mutual relationship between knowledge sharing and job satisfaction when both are predicted by information technology (IT)-competency dimensions such as IT-operations, IT-knowledge and IT-infrastructure in the context...
-
Cooperation areas between universities and industry - case studies in the area of civil engineering
PublicationThe paper describes the areas of cooperation between universities and industry in the area of civil engineering. Presented examples are related to didactics, research grants and commissioned works. On the basis of the authors own experiences the mutual benefits of cooperation in different areas are described. As well as the assessment criteria of the areas of cooperation by the scientific community. The first area of cooperation...
-
Mechanical Recycling via Regrinding, Rebonding, Adhesive Pressing, and Molding
PublicationIncreasing amount of polyurethane foams waste (e.g. from the building or furniture industry) produced every year resulted in the intensive development of their recycling methods. This chapter covers most important mechanical recycling methods, i.e. regrinding, rebonding, adhesive pressing, and molding. The procedure, required equipment and chemicals (if needed) for each method were described. The possible applications of the products...
-
What Skills for Multi-Partner Open Innovation Projects? Open Innovation Competence Profile in a Cluster Ecosystem Context
PublicationIndustry 4.0 and the turbulent environment have rendered increasing interest in open inno- vation that extends from the bilateral transmission of expertise to multilateral platform collaborations. Open innovation ventures are seen as intricate collaborations that require the commitment of numer- ous partners during the lifetime of the project. In order to examine the specific competence of open innovation teams, we set the research...
-
Krytyczne działania i czynniki sukcesu wdrażania projektów informatycznych
PublicationCelem niniejszego artykułu jest określenie, jakie działania powinny podjąć organizacje gospodarcze, aby zidentyfikowane krytyczne czynniki sukcesu projektów informatycznych, pozwalające na zwiększenie prawdopodobieństwa pomyślnego zakończenia przedsięwzięcia, zmaterializowały się. Na potrzeby niniejszego artykułu przeprowadzono badania własne. Jako metodę wybrano analizę przypadków. Badanie przeprowadzono w organizacji, która prowadziła...
-
Trust, Collaborative Culture and Tacit Knowledge Sharing in Project Management–a Relationship Model
PublicationThe aim of this research is to study the relationship between Trust, Collaborative Culture, and Tacit Knowledge Sharing in Project Management as a source of Team Creativity in the context of delivering value through knowledge. For this purpose authors conducted a study of 514 Polish professionals with different functions and experience in managing projects in construction industry. The data collected during the study has been analysed...
-
Stefan Dzionk dr hab. inż.
People -
Energetic model of hydraulic system of refuse collection vehicle based on simulation and experimental data
PublicationThis paper presents an energetic model of hydraulic system of a refuse collection vehicle. First, benefits resulting from implementation of an energetic model in the industry and operation of a Refuse Collection Vehicle are briefly explained. Then, components of the energy consumption in hydraulic circuits of compactor and lifting device are described and combined into a comprehensive model that can be evaluated using basic measurement...
-
What Is Troubling IT Analysts? A Survey Report from Poland on Requirements-Related Problems
PublicationRequirements engineering and business analysis are activities considered to be important to software project success but also difficult and challenging. This paper reports on a survey conducted in Polish IT industry, aimed at identifying most widespread problems/challenges related to requirements. The survey was targeted at people performing role of analyst in commercial IT projects. The questionnaire included 64 pre-defined problems...
-
LS-DYNA simulations of the impacts of a 38-ton Heavy Goods Vehicle into a road cable barrier
PublicationNowadays, more and more attention is being paid to safety on roads and motorways. It is due to the continuous development of road and motorway network and a significant increase of the number of vehicles on roads. To meet the expectations of improving road safety in Poland, the Road Innovations Development (RID) research programme was implemented in 2016. The aim of the RID 3A - Road Safety Equipment (RoSE) project is a comprehensive...
-
Hydromechaniczne urządzenia stoczniowe, W/P/L, IMiB, sem 02, zimowy 2022/23 (PG_00050982)
e-Learning CoursesWykład: Na tle kierunków rozwojowych światowego budownictwa okrętowego ( statki, konstrukcje offshore) przedstawione zostaną metody budowy statków i konstrukcji offshore, aby dalej na tym tle zaprezentować najważniejsze problemy związane z techniczną eksploatacją urządzeń do montażu i wodowania statków nowo budowanych oraz remontu statków takich jak: płyty montażowe, doki suche, pochylnie wzdłużne i poprzeczne, wyciągi wzdłużne...