Search results for: cycle
-
CELL CYCLE
Journals -
Water Cycle
Journals -
Organic Rankine cycle as bottoming cycle to a combined Brayton and Clausius - Rankine cycle
PublicationA preliminary evaluation has been made of a possibility of bottoming of a conventional Brayton cycle cooperating with the CHP power plant with the organic Rankine cycle installation. Such solution contributes to the possibility of annual operation of that power plant, except of operation only in periods when there is a demand for the heat. Additional benefit would be the fact that an optimized backpressure steam cycle has the advantage...
-
Revenue-cycle strategist
Journals -
ENHANCED MASTER CYCLE - SIGNIFICANT IMPROVEMENT OF STEAM RANKINE CYCLE
PublicationThe present paper focuses on an enhancement of the Master Cycle. In the first part, the paper presents a classical Master Cycle which is a modification of the double reheat Rankine cycle. This modification allows to slightly increase efficiency, resolves problems caused by superheated steam on bleeds and decreases mass flow rate of steam directed to reheat. These improvements include the implementation of a tuning turbine from...
-
Organic Rankine as bottoming cycle to a combined Brayton and Clausius-Rankine cycle
PublicationThis paper presents an enhanced approach, as it will be considered here that the ORC installation could be extra-heated with the bleed steam, a concept presented by the authors. In such way the efficiency of the bottoming cycle can be increased and an amount of electricity generated increases. A thermodynamic analysis and a comparative study of the cycle efficiency for a simplified steam cycle cooperating with ORC cycle will be...
-
The Life Cycle Assessment and Life Cycle Cost in public works contracts
PublicationAn important goal, implemented by EU countries under the Europe 2020 strategy, is sustainable development, which includes supporting economy that effectively uses natural and environmentally friendly resources. Solutions in this area are also promoted in tender proceedings in the area of public procurement. The LCA (Life Cycle Assessment) and LCC (Life Cycle Cost) analysis are indicated as the basis for decision-making by awarding...
-
Application of Organic Rankine Cycle as bottoming cycle to conventional heat and power plant
PublicationW pracy rozważono możliwość zastosowania układu ORC w skojarzeniu z ciepłownią lub elektrociepłownią celem podniesienia stopnia wykorzystania jednostki CHP podczas eksploatacji w skali roku. Połączenie układu ORC z zawodową jednostką CHP może wpłynąć na wzrost rocznej produkcji energii elektrycznej i jednoczsne zmniejszenie fluktuacji podczas pracy bloku energetycznego. Z jednej strony następuje konwersja energii cieplnej na elektryczną...
-
Journal of Business Cycle Research
Journals -
Hat problem on the cycle C4
PublicationThe topic of our paper is the hat problem. In that problem, each of n people is randomly tted with a blue or red hat. Then everybody can try to guess simultanously his own hat color looking at the hat colors of the other people. The team wins if at least one person guesses his hat color correctly and no one guesses his hat color wrong, otherwise the team loses. The aim is to maximize the probability of win. In this version every...
-
On the Hat Problem on the Cycle C7
PublicationThe topic is the hat problem in which each of n players is randomly fitted with a blue or red hat. Then everybody can try to guess simultaneously his own hat color by looking at the hat colors of the other players. The team wins if at least one player guesses his hat color correctly, and no one guesses his hat color wrong; otherwise the team loses. The aim is to maximize the probability of a win. In this version every player can...
-
Revalorization of the Szewalski binary vapour cycle
PublicationThe aim of the paper is to revalorizate of the Szewalski binary vapour cycle by analysing thermodynamical and operational parameters of this cycle. This was carried by accessible numerical CFM (Computational Flow Mechanics) codes type, by step-by-step modeling of separates apparatus. The binary vapour cycle is providing steam as the working fluid in the high temperature part of the cycle, while another fluid - a low boiling point...
-
Life cycle theories of savings and consumption
PublicationLife cycle theories of savings and consumption are the economics theories explaining the changes in saving and consumption in the subsequent phases of the human life cycle. There are two main approaches: (1) indicating the dependence of the level of savings and consumption on the average level of income over a long period of human life (life cycle hypothesis; LCH) or (2) on psychological factors, in particular self-control and...
-
Life Cycle Assessment of Analytical Protocols
PublicationLife cycle assessment is a relatively new tool for environmental management, which is becoming more and more important owing to the globalization of the world economy, where there is a need to develop standards in protecting the environment
-
Digital document life cycle development
PublicationPrzedstawiono model DDLC wytwarzania interaktywnych dokumentów cyfrowych z ich pierwowzorów papierowych. Model DDLC opracowany w ramach 5 PR UE IST-2002-33441 MEMORIAL wyróżnia 6 faz i odpowiednie grupy funkcjonalności narzędzi do ich realizacji. Cykl wytwarzanie realizuje politykę całkowitej kontroli jakości, wykorzystującej specjalnie opracowaną metodę Visual GQM.
-
INTERNATIONAL JOURNAL OF LIFE CYCLE ASSESSMENT
Journals -
Looking for a minimum exergy destruction in hierarchical cycle
PublicationThe paper presents results of energy analysis, complemented with an exergy balance, of hierarchical thermodynamic cycle. Proposed cycle is a binary vapour cycle based on a model of real supercritical steam power plant. Energy analysis is used to preliminary optimization of the cycle and the exergy losses analysis is proposed to perform optimization of heat transfer processes, which are essential for hierarchical cycles. Proposed...
-
Exergy Losses in the Szewalski Binary Vapor Cycle
PublicationIn this publication, we present an energy and exergy analysis of the Szewalski binary vapor cycle based on a model of a supercritical steam power plant. We used energy analysis to conduct a preliminary optimization of the cycle. Exergy loss analysis was employed to perform a comparison of heat-transfer processes, which are essential for hierarchical cycles. The Szewalski binary vapor cycle consists of a steam cycle bottomed with...
-
Power enhancement of the Brayton cycle by steam utilization
PublicationThe paper presents thermodynamic analysis of the gas-steam unit of the 65 MWe combined heat and power station. Numerical analyses of the station was performed for the nominal operation conditions determining the Brayton and combined cycle. Furthermore, steam utilization for the gas turbine propulsion in the Cheng cycle was analysed. In the considered modernization, steam generated in the heat recovery steam generator unit is directed...
-
Chapter 7: Engineering Thermodynamics and the Carnot Cycle
PublicationThe chapter presents information about thermodynamics and thermodynamic cycles, especially the history and meaning of Carnot Cycle as well as P-v and T-s Diagrams
-
Analysis and Evaluation of the Working Cycle of the Diesel Engine
PublicationThe paper presents a proposal to apply a quantitative evaluation of the diesel engine with regard to the phenomena occurring during of a working cycle. The proposed procedure when analyzing test results from diesel engine is an attempt to transfer an engine activity evaluation methods in the operational time scale (exploit time), eg. in hours, to the micro-scale (dynamic time) relating only to the execution time of one (several)...
-
Smart Innovation Management in Product Life Cycle
PublicationThe present paper proposes a framework for smart innovation management of the product using a Smart Knowledge Management System comprising Set of Experience Knowledge Structure (SOEKS) and Decisional DNA. This proposed system will allow the entrepreneurs and organizations to perform the innovation process technically and quickly as this framework will store knowledge as well as experiences of the past innovations done in various...
-
Modeling and simulation of tool cycle in manufacturing cell
PublicationThe paper addresses issues concerning modeling and analysis of tool flow within a three-machine manufacturing cell used for small batch manufacturing of a definite spectrum of prismatic parts. The approach utilizes a method for job and tool allocation to work centers with limited number of machines and capacity of tool resources, based on the analysis of formalized relations: job - tool sets required. Selected tool flow control...
-
On the independence number of some strong products of cycle-powers
PublicationIn the paper we give some theoretical and computational results on the third strong power of cycle-powers, for example, we have found the independence numbers alpha((C^2_10)^⊠3) = 30 and alpha((C^4 _14)^⊠3) = 14. A number of optimizations have been introduced to improve the running time of our exhaustive algorithm used to establish the independence number of the third strong power of cycle-powers. Moreover, our results establish...
-
Enhancement of the Brayton cycle efficiency by water or steam utilization
PublicationIn the paper, thermodynamic analysis of two modifications of a Brayton cycle into enhancement cycles with water/steam injection are discussed. The first one deals with a STIG modified system with both interstage compressed air cooling and air heating (heat regeneration) before combustion chamber. The second one, mainly devoted to higher steam/air ratio, is connected with separate steam production in a HRSG. The analysis has been...
-
Integration of adsorption chillers with combined cycle gas turbine
Publication -
Journal of Nuclear Fuel Cycle and Waste Technology
Journals -
Analysis of cell cycle distribution
Open Research DataThe dataset comprehensively details the distribution of A549, H226, and H460 cell lines in various cell cycle phases following treatment with the IC90 concentration of selected anthraquinones. The analysis was performed using the Flowing Software 2.
-
Exergy analysis of the Szewalski cycle with a waste heat recovery system
PublicationThe conversion of a waste heat energy to electricity is now becoming one of the key points to improve the energy efficiency in a process engineering. However, large losses of a low-temperature thermal energy are also present in power engineering. One of such sources of waste heat in power plants are exhaust gases at the outlet of boilers. Through usage of a waste heat regeneration system it is possible to attain a heat rate of approximately...
-
Proposed method for estimating the costs of safety barrier life cycle
PublicationToday barrier types are frequently selected for their price with little regard for the total costs the structure will incur over its lifetime. One of the basic tools designed to manage road infrastructure is the life cycle cost method (LCC, Life cycle cost). It sums up the costs to plan, design, build, operate (use and maintain) and decommission a road structure. Having developed dynamically at the turn of the century the method...
-
Assessment of Environmental Loads in the Life Cycle of a Retail and Service Building
PublicationIn order to achieve the European Union’s climate and energy goals, investments are required, mainly in the areas of energy efficiency, renewable energy sources and infrastructure. Buildings are responsible for almost half of total energy consumption, and nearly 80% of them are energy and ecologically inefficient. The policy of European countries is increasingly more focused on facilities with the highest potential in the areas...
-
Technical and Economic Analysis of the Supercritical Combined Gas-Steam Cycle
PublicationCombined cycle power plants are characterized by high efficiency, now exceeding 60%. The record-breaking power plant listed in the Guinness Book of World Records is the Nishi-Nagoya power plant commissioned in March 2018, located in Japan, and reaching the gross efficiency of 63.08%. Research and development centers, energy companies, and scientific institutions are taking various actions to increase this efficiency. Both the gas...
-
Methods of estimating the cost of traffic safety equipment’s life cycle
Publicationn the article, the authors discuss the preliminary information necessary to determine the scope and direction of further research conducted within the project called “The influence of time and operating conditions on the durability and functionality of road safety elements”. The main objective of the project is to develop the concept of a method for optimizing the life cycle costs of road safety devices. The authors draw attention...
-
The rigid and flexible road pavements in terms of life cycle costs
PublicationThe cost of road pavement construction, its durability and reliability depends on many factors, including: the scope and detail of the technical design, quality of work but also the scope of works related to its maintenance, conservation and operation. Determining the amount of rational expenses, in terms of the life cycle cost of the pavement, requires determination and consideration of the above issues, already at the planning...
-
Static Model of Steam/Water Cycle for Thermal and Economic Analysis
PublicationThe thermodynamic efficiency of typical conventional and nuclear power plants is insufficient. A large amount of the generated heat is removed to the environment and regarded as a waste. A solution which is commonly used to increase the efficiency and profitability of the existing and planned power plants refers to cogeneration of heat and power. To prepare sophisticated thermodynamic and economic analyses, a precise static model...
-
An Impact of Environmental Disturbances on Combined Cycle Power Plant Control
PublicationCombined cycle power plants operate at thermal efficiency approaching 60 percent. In the same time their performance presents several problems that have to be addressed. E.g. gas turbines are very sensitive to backpressure exerted on them by the heat recovery steam generators as well as to ambient pressure and temperature.
-
The significance of the properties of water for the working cycle of the kinesin molecular motor
PublicationExplicit solvent molecular dynamics simulations were performed in this study to investigate and discuss several aspects of the influence of the properties of water on the working cycle of a molecular motor from the kinesin superfamily. The main objects of attention were: the binding of the neck linker and the association of the kinesin and the tubulin. The docking of the neck linker is considered a crucial event during the working...
-
The selected roof covering technologies in the aspect of their life cycle costs
PublicationIn the article is presented an analysis of the life cycle costs calculation for selected roof coverings. The scope of research includes costs of construction, maintenance and demolition of the roof covering structure for two alternative technologies – the traditional and new generation. On the presented example of an industrial building with a roof area of 1000 m², the above costs are taken to consideration for the roof covering...
-
Incorporation of the sulfur cycle in sustainable nitrogen removal systems - A review
PublicationIn wastewater treatment systems, sulfur (S) removal processes are generally based on heterotrophic sulfate (SO42−) reduction by sulfate reducing bacteria and S-dependent autotrophic denitrification by sulfur oxidizing bacteria. A combination of either two cycles (N and S) or three cycles (N, S and C) appears to be a viable approach to sustainable wastewater treatment, resulting in energy savings and reduction of sludge production....
-
Cykl życiowy zespołu mieszkaniowego. Life cycle of the Housing Estate.
PublicationProjektowanie zespołu mieszkaniowego powinno uwzględniać jego oddziaływanie na środowisko przyrodniczo-społeczne. Całkowite oddziaływanie zespołu mieszkaniowego na środowisko można ocenić stosując metodę oceny cyklu życiowego wszystkich jego elemrntów. Omówiono problemy projektowania cyklu życiowego oraz zagadnienia adaptowalności budynków, projektowania uniwersalnego oraz projektowania uczestniczącego.
-
Modeling of a Combined Cycle Gas Turbine Integrated with an Adsorption Chiller
Publication -
THERMODYNAMIC ANALYSIS OF A GENERATION IV SCWR NUCLEAR POWER PLANT CYCLE
PublicationThis article presents a flow and thermodynamic analysis of a Generation IV nuclear cycle. An SCWR (Supercritical water reactor) is a high temperature and high pressure reactor that uses water at a temperature above its thermodynamic critical point as the working fluid. The cycle used for the calculations consists of one interstage superheater and 7 regenerative heat exchangers. Division pressure was optimized in view of the cycle efficiency,...
-
A space-efficient algorithm for computing the minimum cycle mean in a directed graph
PublicationAn algorithm is introduced for computing the minimum cycle mean in a strongly connected directed graph with n vertices and m arcs that requires O(n) working space. This is a considerable improvement for sparse graphs in comparison to the classical algorithms that require O(n^2) working space. The time complexity of the algorithm is still O(nm). An implementation in C++ is made publicly available at http://www.pawelpilarczyk.com/cymealg/.
-
Exploration of Creativity Techniques in Software Engineering in Training-Application-Feedback Cycle
PublicationCreativity research has proposed about a hundred and fifty creativity techniques. The question is whether they can be applied in software engineering for creativity training or directing creativity in software projects. This paper aims at answering this question via a quasi-experiment conducted in Training-Application-Feedback cycle in which participants express their opinions about selected creativity techniques after training...
-
Effect of Overloaded Vehicles on Whole Life Cycle Cost of Flexible Pavements
PublicationThe phenomenon of vehicle overloading—illegal exceeding of maximum legal weight of vehicles, is a serious problem both in developing and developed countries around the world. Overloaded vehicles occur less frequently in comparison to properly loaded vehicles but due to their greater potential to cause damage they significantly contribute to distress of pavement structure. As studies show, the number of overloaded vehicles increases...
-
Diclofenac Alters the Cell Cycle Progression of the Green Alga Chlamydomonas reinhardtii
Publication -
Neural Network Application for Recognition of Geometry Degradation of Power Cycle Components
PublicationPrzedyskutowano problem rozpoznawania degradacji geometrycznej. Skuteczne zastosowanie wybranego typu sieci neuronowej (SSN) jest prezentowane w referacie. SSN wykrywająca typy degradacji geometrycznej wykazała wysoką jakość. Pokazano pewną możliwość ekstrapolacji takich SSN. Pokazano możliwość wykrywania typów degradacji geometrycznej nawet w przypadku pozyskiwania niepełnych danych pomiarowych.
-
Toxicity of cylindrospermopsin in human lymphocytes: Proliferation, viability and cell cycle studies
Publication -
Effects of safety barrier life cycle cost factors - identification and analysis
PublicationThe costs borne by road infrastructure authorities for managing and maintaining road devices such as safety barriers may be very high. This has prompted the need for identifying and analysing in detail all factors that influence the costs of safety barriers throughout their service life. To meet that need, the authors used international experience and field data collected under the LifeRoSE project to define the cost structure...
-
THE THERMODYNAMIC ANALYSIS OF THE SZEWALSKI HIERARCHIC VAPOUR CYCLE COOPERATED WITH THE SYSTEM OF HEAT RECOVERY
PublicationIn this paper, thermodynamic analysis of the Szewalski hierarchic vapour cycle cooperated with the system of heat recovery from exhaust gases are presented. According to that purpose, the CFM (Computation Flow Mechanics [1,3]) approach has correctly been used. The whole system consists of the first traditional steam cycle, the second organic Rankine cycle (ORC) and system of heat recovery with use of water with temperature 90...
-
Thermodynamic analysis of the double Brayton cycle with the use of oxy combustion and capture of CO2
PublicationIn this paper, thermodynamic analysis of a proposed innovative double Brayton cycle with the use of oxy combustion and capture of CO2, is presented. For that purpose, the computation flow mechanics (CFM) approach has been developed. The double Brayton cycle (DBC) consists of primary Brayton and secondary inverse Brayton cycle. Inversion means that the role of the compressor and the gas turbine is changed and firstly we have expansion...
-
Gas Turbine Cycle with External Combustion Chamber for Prosumer and Distributed Energy Systems
PublicationThe use of various biofuels, usually of relatively small Lower Heating Value (LHV), affects the gas turbine efficiency. The present paper shows that applying the proposed air by-pass system of the combustor at the turbine exit causes tan increase of efficiency of the turbine cycle increased by a few points. This solution appears very promising also in combined gas/steam turbine power plants. The comparison of a turbine set operating...
-
Inclusive Communication Model Supporting the Employment Cycle of Individuals with Autism Spectrum Disorders
PublicationDifficulties with interpersonal communication experienced by individuals with autism spectrum disorders (ASD) significantly contribute to their underrepresentation in the workforce as well as problems experienced while in employment. Consistently, it is vital to understand how communication within the employment cycle of this group can be improved. This study aims to identify and analyze the possibilities of modifying the communication...
-
Theoretical Organic Rankine Cycle efficiency depending on different thermodynamic work variables.
PublicationOne of promising technologies of utilizing low- temperature waste heat is through ORC (Organic Rankine Cycle) system implementation. A primary objective in designing in-stallations based on such systems is to maximize the installation's work efficiency. On the other hand, ecological factors are commonly considered a natural barrier in introducing new, often very expensive technologies. Ecological effect of a potential modernization...
-
Project Management Cycle in the Construction Industry Augmented by Collaborative Innovation Network Software
PublicationProject management is a very broad concept that has in recent times is growing rapidly. Management is especially complex in the construction sector, among the other sectors, due to the high uncertainty of workmanship and complexity of construction projects. Proper project management skills are an important factor in the success of projects, leading to reduced costs and shorten the time of investment. Nevertheless, most of the projects...
-
Cell cycle is disturbed in mucopolysaccharidosis type II fibroblasts, and can be improved by genistein
Publication -
Spectral criterion for high-cycle fatigue of engine parts under asymmetricrandom load
PublicationPrzedstawiono kryterium ograniczonej trwałości zmęczeniowej wysokocyklowej części silników poddanych stacjonarnemu obciążeniu stochastycznemu o niezerowej wartości średniej. Wyznaczono naprężenie równoważne w postaci procesu okresowego w sensie średnio kwadratowym i zastosowano równanie Goodmana/So-derberga. Ukazano wpływ rozciągającego naprężenia resztowego na wartość oczekiwaną czasu do chwili uszkodzenia zmęczeniowego.
-
Spectral criterion for high-cycle fatigue of metals under multiaxial random loading
PublicationPrzedstawiono kryterium projektowe elementów z metali ciągliwych, poddanych w zakresie wytrzymałości zmęczeniowej wysokocyklowej wieloosiowemu naprężeniu o zerowej wartości średniej. Jest ono oparte na równaniu krzywej Whleradla symetrycznego rozciągania-ściskania i gęstościach widmowych mocy składowych naprężenia. W tym celu wyznaczono równoważne naprężenie w dziedzinie częstości przy założeniu, że składowe rzeczywistego naprężenia...
-
Life Cycle Cost Assessment and the Optimum Design of Timber Roofs for Sustainable Construction
Publication -
Application of renewable energy sources to drive organic Rankine cycle micro CHP
PublicationOdnawialne źródła energii rzadko znajdują zastosowanie przy stawianych obecnie wymaganiach przez nowoczesne ciepłownie. Pojawiła się unikalna okazja pomocy przy wprowadzeniu na rynek elektrowni zoptymalizowanej dla tych nieużywanych i pomijanych źródeł ciepła. Organiczny obieg Rankine'a jest podobny do konwencjonalnych turbin parowych, wyjątkiem jest płyn napędzający turbinę, którym jest płyn roboczy o dużej masie cząsteczkowej....
-
Working fluid selection for Organic Rankine Cycle applied to heat recovery systems
PublicationPrzedstawiono algorytm obliczeń sprawności systemu ORC na bazie dużej liczby cieczy organicznych.
-
Cardiovascular Function in Different Phases of the Menstrual Cycle in Healthy Women of Reproductive Age
Publication -
Evaluation of the efficiency of the duty cycle of refuse collection vehicle based on real-world data
PublicationIn this paper a method of the efficiency evaluation of the duty cycle of Refuse Collection Vehicle is presented. Using real world data, two representative duty cycles were analysed. Total cycle efficiency was calculated, as well as the efficiency of particular cycle phases. Then, energy needed to collect and compact the waste and energy from fuel were compared. Measured and calculated values were shown on the diagrams illustrating...
-
Analytical method for calculation of heat source temperature drop for the Organic Rankine Cycle application
PublicationIn the paper presented are considerations on the cooperation of the limited capacity heat source with the Organic Rankine Cycle unit. Usually the heat source providing thermal energy to the Organic Rankine Cycle (ORC) may have twofold characteristics. It can be in the form of a single phase fluid, i.e. as hot exhaust gas or hot liquid, or in some cases it may be available as a phase changing fluid, as for example, technological...
-
A concept of zero-dimensional and three-dimensional thermodynamic modelling of steam storage in a steam cycle
PublicationThis work presents the thermodynamic model of steam storage in a steam cycle. The innovative steam storage is an integral part of the unit and thus responds quickly to changes in load. This enhances the primary control reserve while maintaining high efficiency of energy conversion. With regard to power plants, it improves the operational safety of generation units, as it prevents boiler and turbines overload in the case of steep...
-
The new concept of capillary forces aided evaporator for application in domestic organic rankine cycle
PublicationThis paper presents studies on the possibility of applying capillary forces induced in the porous structure to a modern design of evaporator. The potential application of such heat exchanger is for example an evaporator of the domestic micro combined heat and power (CHP) unit. One of the problems in the micro-CHP is excessive demand for pumping power. The proposed design helps in overcoming that issue. In the evaporator outlined...
-
Mechanochemical Energy Transduction during the Main Rotary Step in the Synthesis Cycle of F1-ATPase
PublicationF1-ATPase is a highly efficient molecular motor that can synthesize ATP driven by a mechanical torque. Its ability to function reversibly in either direction requires tight mechanochemical coupling between the catalytic domain and the rotating central shaft, as well as temporal control of substrate binding and product release. Despite great efforts and significant progress, the molecular details of this synchronized and fine-tuned...
-
Economic Aspects of Algae Biomass Harvesting for Industrial Purposes. The Life-Cycle Assessment of the Product
Publication -
Spectral criterion for high-cycle fatigue of metals under multiaxial static and stochastic loading.
PublicationPraca dotyczy oceny zmęczenia metali ciągliwych w złożonych stanach wieloosiowych obciążeń statycznych i dynamicznych, przy założeniu, że składowe naprężenia są stacjonarnymi procesami stochastycznymi, które są stacjonarnie skorelowane i różniczkowalne w sensie średniokwadratowym. Przyjmując, że wartości średnie i gęstości widmowe mocy tych procesów są znane, sformułowano kryterium ograniczonej trwałości zmęczeniowej w dziedzinie...
-
High-cycle fatique criterion for anisotropic metals under multiaxial constant and periodic loads
PublicationPrzedmiotem rozważań jest okresowe naprężenie, którego kartezjańskie składowe są dane w postaci szeregów Fouriera. Dla uwzględnienia wpływu składowych stałych zastosowano zmodyfikowaną formułę Soderberga. Zdefiniowano naprężenie równoważne o synchronicznych składowych i sformułowano kryterium ograniczonej trwałości zmęczeniowej. Kryterium to obejmuje warunki wytrzymałości statycznej i bezpieczeństwa zmęczeniowego z zakresie wysokocyklowym...
-
Spectral criterion for high-cycle fatigue of anisotropic metals under multiaxial random loads
PublicationPraca dotyczy oceny ograniczonej trwałości zmęczeniowej metali ciągliwych, poddanych wieloosiowym obciążeniom statycznym i dynamicznym. Zakłada się, że kartezjańskie składowe tensora naprężenia są sumą losowych wartości średnich o znanych drugich momentach statystycznych i stacjonarnych procesów stochastycznych o znanych gęstościach widmowych mocy. Przyjmując, że procesy te są stacjonarnie skorelowane, różniczkowalne w sensie średnio-kwadratowym...
-
Simulation research on the tool cycle in automated manufacturing system at selected tool duplication levels
PublicationThe paper presents results of the research concerning impact of applied tool exchange rule on the efficiency of an automated manufacturing system. The research consider the tool duplication levels that constrain realisation of a manufacturing process. Presented study was based on the real industrial system data. The operating of the investigated system of manufacture, including tools necessary for its realisation, was modelled...
-
Thermal-hydraulic issues of flow boiling and condensation in organic Rankine cycle heat exchangers
PublicationW pracy przedstawiono szereg zagadnień cieplno-przepływowych podczas wrzenia i kondensacji w przepływie w wymiennikach ciepła obiegu ORC. Uwzględniono przemiany fazowe. Analizowano zagadnienia stabilności pracy wymienników oraz ich dynamikę
-
Non-dimensional thermodynamic criterion for selection of dry working fluid for organic Rankine cycle
PublicationW pracy przedstawiono bezwymiarowe kryterium termodynamiczne do selekcji suchych czynników roboczych dla organicznego obiegu Rankina, które umożliwia wstępną selekcję potencjalnych czynników.
-
Determination of heat transfer coefficient in evaporator of the organic Rankine cycle using the Wilson method.
PublicationW pracy zastosowano metodę Wilsona do wyznaczania współczynnika przejmowania ciepła. Przedmiotem rozważań jest płytowy wymiennik ciepła pracujący jako parownik w laboratoryjnym stanowisku realizującym obieg ORC. Wykorzystana metoda jest metodą wydajną w przypadku wymienników ciepła o złożonej geometrii i dużej liczbie kanałów, dla których pomiar temperatury ścianki jest niemożliwy, a przez to określenie współczynników przejmowania...
-
THE COST ANALYSIS OF CORROSION PROTECTION SOLUTIONS FOR STEEL COMPONENTS IN TERMS OF THE OBJECT LIFE CYCLE COST
PublicationSteel materials, due to their numerous advantages - high availability, easiness of processing and possibility of almost any shaping are commonly applied in construction for carrying out basic carrier systems and auxiliary structures. However, the major disadvantage of this material is its high corrosion susceptibility, which depends strictly on the local conditions of the facility and the applied type of corrosion protection system....
-
Thermodynamic Cycle Concepts for High-Efficiency Power Plans. Part A: Public Power Plants 60+
PublicationAn analysis was carried out for different thermodynamic cycles of power plants with air turbines. Variants with regeneration and different cogeneration systems were considered. In the paper, we propose a new modification of a gas turbine cycle with the combustion chamber at the turbine outlet. A special air by-pass system of the combustor was applied and, in this way, the efficiency of the turbine cycle was increased by a few points....
-
Experimental tests and numerical simulations of full scale composite sandwich segment of a foot- and cycle- bridge
PublicationIn the paper experimental tests and numerical simulations of a full cross-section segment of ultimately designed foot-and cycle-bridge are presented. The experimental tests were conducted on element with length reduced to 3 m and unchanged (target) cross-section dimensions. The external skin of structure is GFRP laminate while internal core is PET foam. Several quasi-static tests were performed using hydraulic cylinder to generate...
-
PARAMETRIC ANALYSIS OF THE EFFICIENCY OF THE COMBINED GAS-STEAM TURBINE UNIT OF A HYBRID CYCLE FOR THE FPSO VESSEL
PublicationA thermal diagram of the combined gas‒steam turbine unit of a hybrid cycle, which is an energy complex consisting of a base gas turbine engine with a steam turbine heat recovery circuit and a steam-injected gas turbine operating with overexpansion, is proposed. A mathematical model of a power plant has been developed, taking into consideration the features of thermodynamic processes of simple, binary, and steam-injected...
-
Supervisory Control System for Adaptive Phase and Work Cycle Management of Sequencing Wastewater Treatment Plant
PublicationThe paper presents the design of the integrated control system applied to Sequencing Batch Reactor (SBR) in a biological Wastewater Treatment Plant (WWTP) in Swarzewo, which operates under activated sludge technology. Based on the real data records, ASM2d biological processes model and aeration system model, hierarchical control system for dissolved oxygen tracking and cycle management is designed. Internal Model Controller (IMC)...
-
Conversion of waste biomass into activated carbon and evaluation of environmental consequences using life cycle assessment
PublicationIn this article, activated carbon was produced from Lantana camara and olive trees by H3PO4 chemical activation. The prepared activated carbons were analyzed by characterizations such as scanning electron microscopy, energy-dispersive X-ray spectroscopy, Brunauer–Emmett–Teller, X-ray diffraction, thermogravimetric analysis, and Fourier transform infrared spectroscopy. H3PO4 is used as an activator agent to create an abundant pore...
-
Investigations of Ammonia Emissions from Euro 5 Passenger Cars Over a Legislative Driving Cycle
Publication -
Effects of flavonoids on expression of genes involved in cell cycle regulation and DNA replication in human fibroblasts
Publication -
Process Monitoring in Heavy Duty Drilling Rigs—Data Acquisition System and Cycle Identification Algorithms
Publication -
Organic Rankine cycle turbogenerator cooling – Optimization of the generator water jacket heat exchange surface
Publication -
Modulation of cellular response to anticancer treatment by caffeine:inhibition of cell cycle checkpoints, DNA repair and more
PublicationKofeina i inne metyloksantyny wywołują bardzo różne efekty fizjologiczne w organizmie człowieka. W pracy przedstawiamy, które z tych efektów mogą wpływać na skuteczność terapii przeciwnowotworowych. Kofeina może bezpośrednio wpływać na transport oraz aktywację metaboliczną cząsteczek leków do komórki, poprzez tworzenie kompleksów z lekami zawierającymi układy poliaromatyczne. Kofeina hamuje aktywność kinaz ATM/ATR co prowadzi do...
-
Temperament and ovarian reproductive hormones in women: Evidence from a study during the entire menstrual cycle
Publication -
Exergetic Analysis of the nCO2PP Cycle with Particular Reference to the Exergy Destruction of Sewage Sludge Due to Gasification
PublicationAn exergy analysis is carried out on the negative CO2 emission gas power plant (nCO2PP), which integrates the process sections of fuel preparation, power generation and carbon capture. Processes of exergy destruction are studied with particular focus on the process in the gasification unit of the fuel preparation section, where a large amount of exergy is destroyed in various chemical reactions from sewage sludge to producer gas...
-
A collection of directed graphs for the minimum cycle mean weight computation
Open Research DataThis dataset contains definitions of the 16 directed graphs with weighted edges that were described in the following paper: Paweł Pilarczyk, A space-efficient algorithm for computing the minimum cycle mean in a directed graph, Journal of Mathematics and Computer Science, 20 (2020), no. 4, 349--355, DOI: 10.22436/jmcs.020.04.08, URL: http://dx.doi.org/10.22436/jmcs.020.04.08 These...
-
Thermodynamic Cycle Concepts for High-Efficiency Power Plants. Part B: Prosumer and Distributed Power Industry
PublicationAn analysis was carried out for different thermodynamic cycles of power plants with air turbines. A new modification of a gas turbine cycle with the combustion chamber at the turbine outlet has been described in the paper. A special air by-pass system of the combustor was applied, and in this way, the efficiency of the turbine cycle was increased by a few points. The proposed cycle equipped with an effective heat exchanger could...
-
Analysis of Organic Rankine Cycle efficiency and vapor generator heat transfer surface in function of the reduced pressure
PublicationIn the paper presented is analysis of the influence of reduced pressure on efficiency and heat transfer area of vapor generator of Organic Rankine Cycle (ORC) in case of subcritical and supercritical parameters of operation. Compared are two cases of subcritical and supercritical ORC featuring a similar arrangement of heat source supply and heat removal, that is featuring the same temperatures of working fluid before the turbine,...
-
The analysis of the influence of the corrosion protection method of selected steel elements on the steel structure life cycle costs
PublicationSteel products are widely used in the construction for the performance of essential and additional elements of engineering structures. They are characterized by high tensile strength, compression and bending, the structure homogeneity, the possibility of assembly regardless of the season and climatic conditions, ease of processing and the possibility of almost any shape. The main disadvantage of steel structures is their high susceptibility...
-
Multicriteria Optimization Approach to Design and Operation of District Heating Supply System over its Life Cycle
PublicationDistrict Heating (DH) systems are commonly supplied using local heat sources. Nowadays, modern insulation materials allow for effective and economically viable heat transportation over long distances (over 20 km). In the paper a method for optimized selection of design and operating parameters of long distance Heat Transportation System (HTS) is proposed. The method allows for evaluation of feasibility and effectivity of heat transportation...
-
Erratum to: Effects of flavonoids on expression of genes involved in cell cycle regulation and DNA replication in human fibroblasts
Publication -
Pharmacomicrobiomics of cell-cycle specific anti-cancer drugs – is it a new perspective for personalized treatment of cancer patients?
PublicationIntestinal bacteria are equipped with an enzyme apparatus that is involved in the active biotrans-formation of xenobiotics, including drugs. Pharmacomicrobiomics, a new area of pharmacology, analyses interactions between bacteria and xenobiotics. However, there is another side to the coin. Pharmacotherapeutic agents can significantly modify the microbiota, which consequently affects their efficacy. In this review, we comprehensively...
-
Environmental impacts of food waste management technologies: A critical review of life cycle assessment (LCA) studies
PublicationFood waste is a serious global problem. Therefore, it is essential to reduce food waste and adopt recycling strategies to minimize its environmental impacts. However, conventional waste disposal methods emit harmful gases such as dioxin, CH4, N2O, and NH3, which contaminate the air and water resources. This work reviews the environmental consequences of food waste based on lifecycle assessment (LCA) techniques using methods such...
-
Design analysis of turbines for co-generating micro-power plant working in accordance with organic Rankine's cycle
PublicationPrzedstawiono wyniki analizy projektowej turbin dla mikrosiłowni kogeneracyjnej pracującej według organicznego obiegu Rankine'a z wykorzystaniem biopaliwa. Rozważono zakres mocy cieplnej od 25kW do 100kW, któremu odpowiadała możliwa do uzyskania moc elektryczna od 2kW do 12kW. Przeanalizowano projekty turbin osiowych (jedno- i wielostopniowych, także z częściowym zasilaniem), turbin promieniowych i promieniowo-osiowych. Porównano...
-
Yamogenin-Induced Cell Cycle Arrest, Oxidative Stress, and Apoptosis in Human Ovarian Cancer Cell Line
Publication -
Chloroacridine derivatives as potential anticancer agents which may act as tricarboxylic acid cycle enzyme inhibitors
PublicationThe chloroacridines affect biological forms of melanoma in different ways. Amelanotic (Ab) melanoma (with inhibited melanogenesis and higher malignancy) was particularly sensitive to the action of the chloroacridines. The Ab melanoma cells died through apoptosis and through death without caspase activation. Diminished activity of TAC enzymes was noticed among Ab melanoma cells together with ATP/NAD depletion, especially in the...
-
Manufacturing and Recycling Impact on Environmental Life Cycle Assessment of Innovative Wind Power Plant Part 2/2
PublicationThe process of conversion of wind kinetic energy into electricity in innovative wind power plant emits practically no harmful substances into the environment. However, the production stage of its components requires a lot of energy and materials. The biggest problem during production plan-ning process of an innovative wind power plant is selection of materials and technologies and, consequently, the waste generated at this stage....