displaying 1000 best results Help
Search results for: PROTOKÓŁ DIAMETER
-
Application in circular sawing machines of the experimental results of investigations of the chip removing system operation
PublicationThe experimental results of the chip removing system operation are presented. The main aim of them was to optimize suction system of the panel saw Fx3 and its follower Fx550. The attention was focused on the upper casing, which was the part of removing system. Within the framework of the work a systematic experimental study of pressure distribution in the casing during operation of the selected rotational speed of saw blade with...
-
Effect of the inclination angle of the condenser on the heat transfer coefficient value – experimental study
PublicationWhen considering problem of the condensation of the refrigerant in a flow inside channel, one needs to pay attention to the shape of its cross-section, the hydraulic diameter, the channel length as well as the orientation of the channel axis in space (horizontal, vertical, inclined). This paper presents an experimental study concerning the effect of the inclination angle of the condenser with a single coil pipe on the heat transfer...
-
Study of the atomic structure and morphology of the Pt3Co nanocatalyst
PublicationThe local structure and chemical disorder of a commercially available Pt3Co nanocatalyst supported on high surface area carbon were investigated. High-quality XAFS spectra were collected at the ELETTRA synchrotron XAFS 11.1 beamline. XAFS spectra analysis have been performed accounting for the reduction of the coordination number and degeneracy of three-body configurations, resulting from transmission electron microscopy (TEM)...
-
Thermal Analysis Of Hybrid Microchannel-Microjet Heat Exchanger
PublicationThe paper presents the numerical investigation of a microjet- microchannel cooling module. In which microjets of water are impinging into the microchannels and forming a liquid film on the impingement surface. Applied technology takes benefits from two very attractive heat removal techniques. When laminar jets are impinging on the surface have a very high kinetic energy at the stagnation point, also in microchannels boundary layer...
-
Development and application of asphalt binder relaxation test in different dynamic shear rheometers
PublicationIn this study, a novel relaxation test is proposed to evaluate asphalt binder low temperature properties using a Dynamic Shear Rheometer (DSR) with parallel plates of 4 mm in diameter. Three rheometers from three different manufacturers are used to analyze seven asphalt binders. Different material parameters are derived which are useful to evaluate and discriminate different asphalt binders. Test results of all three instruments...
-
Peculiarities of measurement uncertainty evaluation at calibrating a ring gauge
PublicationExample S13 from EA-4/02 M:2013 “Calibration of a ring gauge with a nominal diameter of 90 mm” is analyzed. The report uses the kurtosis method and the law of propagation of expanded uncertainty developed by the authors to the expanded uncertainty evaluation. It is shown that the introduction of a coaxiality correction for the ring gauge and the measuring axis of the comparator leads to the need to estimate its standard measurement...
-
Systemy Teleinformatyczne i Telematyka w Transporcie sem. Letni 2023/2024
e-Learning CoursesBezpieczeństwo i ochrona danych w teleinformatyce: sposoby ochrony danych, zapory sieciowe, protokoły bezpieczeństwa, szyfrowanie i uwierzytelnianie. Media transmisyjne: transmisja przewodowa, połączenie światłowodowe, transmisja bezprzewodowa. System telekomunikacyjny: sygnały cyfrowe, dyskretyzacja sygnału (próbkowanie, kwantowanie), wybrane układy cyfrowe. Sieci komputerowe w połączeniach lokalnych: urządzenia sieciowe, protokoły,...
-
Przewodnik migracji do IPv6
PublicationArtykuł przedstawia założenia i sposób implementacji Przewodnika migracji IPv6, który jest narzędziem wspomagającym proces migracji sieci do protokołu IPv6. Omówiona jest architektura aplikacji oraz sposób gromadzenia i zarządzania wiedzą na temat aktualnego stanu sieci, który jest przygotowywany do migracji a także szczegółowy sposób przejścia przez ten proces. Omówione zostały także motywy powstania proponowanego narzędzia.
-
Techniki audytowania zabezpieczeń sieci bezprzewodowej z wykorzystaniem systemów klasy grid
PublicationZaprezentowano efektywne zasady weryfikacji zabezpieczeń sieci bezprzewodowych z wykorzystaniem oprogramowania Back/Track w dystrybucji systemu Linux. Omówiono algorytmy RC4, MIC i AES, które wspierają techniki zabezpieczeń WEP, WPA i WPA2 wchodzące w skład protokołu IEEW 802.11. Zamieszczano także opis wykorzystania systemu rozproszonego Comcute o architekturze typu grid do prowadzenia audytu bezprzewodowej sieci.
-
Integracja architektury J2EE z interfejsem 1-wire w systemie identyfikacji i akwizycji danych
PublicationW projekcie systemu integrującego architekturę J2EE z interfejsem pomiarowym 1-wire wykorzystano: platformę TINI jako system bazowy, klucze iButton jako metodę identyfikacji, sieć internetową jako sposób integracji z innymi systemami, J2EE jako model architektury logicznej oraz technologię JSP, Sun Application Server i MySQL. System umożliwia dodanie i usunięcie klucza z bazy danych, zapisaniehistorii interakcji, dostarczenie mechanizmu...
-
SUSHI - jak to ugryźć? Czyli o standaryzacji i gromadzeniu statystyk wykorzystania zasobów elektronicznych na przykładzie Biblioteki Głównej Gdańskiego Uniwersytetu Medycznego
PublicationStatystyki wykorzystania dostarczają bibliotekarzom informacji niezbędnych przy podejmowaniu decyzji o zakupie dostępu do wybranych zasobów elektronicznych. W roku 2002 rozpoczął działalność międzynaro- dowy projekt COUNTER (Counting Online Usage of Networked Electronic Resources), którego celem było ujednolicenie raportów wykorzystania e-zasobów, a także uczynienie ich możliwie najbardziej miarodajnymi. W roku 2007 amerykańska...
-
Green Geotechnics in practice and theory
PublicationW artykule przedstawiono analizę wykorzystania materiałów antropogenicznych (głównie ubocznych produktów spalania) w drogownictwie na przykładzie Polski. Główny nacisk położono na analizę technologii w aspekcie emisyjności CO2. Zdaniem autorów technologie niskoemisyjne powinny mieć priorytet ''stosowalności'' - zwłaszcza w świetle ustaleń tzw. Protokołu z Kioto 2005. Geotechnika przyjazna środowisku, czyli tzw. Zielona Geotechnika,...
-
Semantic web services in L2L.
PublicationOgromnym problemem współpracy istniejących bibliotek cyfrowych w kontekście używanych protokołów jest albo ograniczenie funkcjonalności systemu albo łamanie istniejących standardów komunikacji powodując utratę możliwości kooperacji z wieloma systemami. Technologia semantycznych usług sieciowych może zmienić tę sytuację przez umożliwienie komunikacji z usługą bez wcześniejszej znajmości protokołu stosowanego przez bibliotekę. W...
-
Wykorzystanie technologii Ethernet poza sieciami lokalnymi
PublicationW referacie opisano próby implementacji protokołu Etherent nie tylko w sieciach lokalnych, ale również w sieciach dostępowych (Ethernet pierwszej//ostatniej mili - EFM) i rozległych (10 gigabit Ehernet - 10GE). Proponowane rozwiązanie EFM może stać się tanim szerokopasmowym alternatywnym rozwiązaniem dla DSL i modemów kablowych. Z kolei 10GE może być alternatywą lub uzupełnieniem zastosowań OC-192 SONET.
-
Problemy określania położenia geograficznego węzłów sieci IP
PublicationW pracy przedstawiono problemy lokalizacji geograficznej węzłów w sieci Internet. Zaproponowano metodologię określania topologii opartą o protokoły ICMP (ping i tracert), serwis WHOIS i DNS. Opracowaną metodologię zastosowano do określenia topologii wybranych sieci operatorów działających na terenie Polski. Przedstawiono wnioski wynikające z przeprowadzonych badań. Wskazano na ograniczenia wynikające ze struktury sieci szkieletowych...
-
Koncepcja metody bezpiecznej transmisji danych w sieci KNX na potrzeby systemu zdalnego nadzoru
PublicationW pracy omówiono wymagania stawiane kanałom komunikacyjnym wykorzystywanym do realizacji funkcji związanych z bezpieczeństwem oraz zaproponowano metodę bezpiecznej transmisji danych w sieci KNX opracowaną na potrzeby systemu zdalnego nadzoru. Metoda definiuje dodatkową warstwę stosu protokołu komunikacyjnego KNX umożliwiającą spełnienie wymagań dotyczących niezawodność i bezpieczeństwa transmisji danych bez konieczności wprowadzania...
-
Attenuation of Hyperglycemia in Diabetic Rats Assisted by Immobilized Probiotic in Sodium Alginate
PublicationDiabetes mellitus type 2 (DM2) is the most common chronic disease worldwide, characterized mainly by increased glucose concentration in the blood and affecting several organs’ functionality. The daily consumption of probiotic bacteria can help control diabetes and reduce the damage caused. Cell immobilization techniques are a powerful tool that provides physical cell protection to such probiotic bacteria against gastrointestinal...
-
Artificial Neural Network based fatigue life assessment of riveted joints in AA2024 aluminum alloy plates and optimization of riveted joints parameters
PublicationThe objective of this paper is to provide the fatigue life of riveted joints in AA2024 aluminum alloy plates and optimization of riveted joints parameters. At first, the fatigue life of the riveted joints in AA2024 aluminum alloy plates is obtained by experimental tests. Then, an artificial neural network is applied to estimate the fatigue life of riveted lap joints based on the number of lateral and longitudinal holes, punch pressure,...
-
Mobility Managment Scenarios for IPv6 Networks-Proxy Mobile IP-v6Implementation Issues
PublicationManagement of user at the network layer plays an important role in efficient network operation. In the paper, authors' implementation of one of network-based mobility management models, namely Proxy Mobile IPv6, is presented and tested in a number of networking topologies and communication scenarios. The proposed implementation covers PMPIv6 functionality with optional security extensions (use of Diameter protocol) and handover...
-
Imaging of Increasing Damage in Steel Plates Using Lamb Waves and Ultrasound Computed Tomography
PublicationThis paper concerns inspection of steel plates, with particular emphasis on the assessment of in-creasing damage. Non-destructive tests were performed on four plates, one of which was un-damaged, while the remaining three had a defects in the form of circular holes with a diameter of 2, 5, and 10 cm. Guided Lamb waves were used in the research, and the image reconstruction was performed using ultrasound computed tomography. The...
-
Free Vibration of Flexomagnetic Nanostructured Tubes Based on Stress-driven Nonlocal Elasticity
PublicationA framework for the flexomagneticity influence is here considered extending the studies about this aspect on the small scale actuators. The developed model accommodates and composes linear Lagrangian strains, Euler-Bernoulli beam approach as well as an extended case of Hamilton’s principle. The nanostructured tube should subsume and incorporate size effect; however, for the sake of avoiding the staggering costs of experiments,...
-
Uncertainty of mass flow measurement using centric and eccentric orifice for Reynolds number in the range 10,000 ≤ Re ≤ 20,000
PublicationThe article analyses the impact of the Reynolds number on the estimated uncertainty of the mass flow rate measurement using an orifice plate. The objects of the research were two types of orifices: centric (ISA) and eccentric, with the diameter ratio β = 0.5. Studies were performed by Monte Carlo simulation and experiments for Reynolds numbers in the range 10,000 ≤ Re ≤ 20,000. The obtained results have shown that for both orifice...
-
Revsable framework for telecontrol protocols. W: Springer Homepage [online] Proceedings. Second International ESPRIT ARES Workshop on Development and Evolution of Software Architectures for Product Families. Las Palmas de Gran Canaria, Spain, February 26-27, 1998. [Dostęp: 20 grudnia**2002]. Ed. F. van der Linden. Dostępny w World Wide Web: http://link.springer.de/link/ /service/series/0558/tocs/t1429.htm [s. 6-13, 5 rys. bibliogr. 6 poz.] Wzorce wielokrotnego wykorzystania oprogramowania protokołów telesterowa- nia.
PublicationZaprezentowano wzorzec COMSOFT wielokrotnego wykorzystania oprogramowania o-pracowany dla protokołów telesterowania. Jego podstawy tworzą: metodologiaobiektowa i wzorce wielokrotnego użycia. Zastosowanie wzorców wspomagają:biblioteka komponentów, wykorzystywanych we wszystkich fazach konstrukcji o-programowania oraz procedury użytkowania i parametryzacji. Opracowane wzorcezostały praktycznie zastosowane do konstrukcji oprogramowania...
-
Experimental Investigation of the Thermal Performance of a Wickless Heat Pipe Operating with Different Fluids: Water, Ethanol, and SES36. Analysis of Influences of Instability Processes at Working Operation Parameters
PublicationIn this study, the influences of different parameters on performance of a wickless heat pipe have been presented. Experiments have been carried out for an input power range from 50 W to 300 W, constant cooling water mass flow rate of 0.01 kg/s, and constant temperature at the inlet to condenser of 10 C. Three working fluids have been tested: water, ethanol, and SES36 (1,1,1,3,3-Pentafluorobutane) with different filling ratios (0.32,...
-
The importance of individual spray properties in performance improvement of a urea-SCR system employing flash-boiling injection
PublicationThe appropriate mixing of a urea–water solution (UWS) with exhaust gases in a selective catalytic reduction system is crucial to efficiently reduce nitrogen oxides and diminish the deposition of liquid wall film. One of the methods to enhance the mixing of the UWS with the exhaust gases is a flash-boiling injection. Its positive effect has been linked with a reduced Sauter mean diameter (SMD) and improved evaporation, but the...
-
Cytocompatibility, antibacterial, and corrosion properties of chitosan/polymethacrylates and chitosan/poly(4‐vinylpyridine) smart coatings, electrophoretically deposited on nanosilver‐decorated titania nanotubes
PublicationThe development of novel implants subjected to surface modification to achieve high osteointegration properties at simultaneous antimicrobial activity is a highly current problem. This study involved different surface treatments of titanium surface, mainly by electrochemical oxidation to produce a nanotubular oxide layer (TNTs), a subsequent electrochemical reduction of silver nitrate and decoration of a nanotubular surface with...
-
System sterowania indukcyjnym silnikiem liniowym na bieżni liniowej - analiza problemów działania wykorzystanych protokołów komunikacyjnych
PublicationW artykule opisano stanowisko laboratoryjne z silnikiem liniowym na bieżni liniowej znajdujące się w Katedrze Energoelektroniki i Maszyn Elektrycznych na Wydziale Elektrotechniki i Automatyki Politechniki Gdańskiej oraz omówiono, w jaki sposób rozwiązano problemy związane z działaniem wykorzystanych w systemie sterowania protokołów komunikacyjnych. Stanowisko ma charakter dydaktyczny. W skład stanowiska wchodzi indukcyjny silnik...
-
Investigation of RH effect on uncommon limonene ozonolysis products and SOA formation in indoor air with real time measurement techniques
PublicationScientific interest in SOA influence on indoor air quality increases since last 20 years. It is well known, that particles of nano-sized diameter pose a threat for human health causing, among others: eye, upper airway irritation, inflammatory response in cells, worsening asthma, hypertension, diabetes, and central nervous dysfunction. Terpenes are reactive VOCs, commonly emitted in indoor air and considered to be SOA precursors...
-
Niepewności w kwestii CO2 na tle globalnego ocieplenia
PublicationDitlenek węgla to powszechnie znany gaz, uczestniczący m.in. w procesie fotosyntezy. W ostatnich latach zyskał on jednak miano czynnika, który w głównej mierze przyczynia się do powstania efektu cieplarnianego, a walka z emisjami CO2 stała się jednym z najważniejszym elementów polityki UE. Powiązanie tezy antropogenicznego wpływu na ocieplenie klimatu ze wzrostem stężenia ditlenku węgla w atmosferze, pociągnęło za sobą konsekwencje...
-
Wyznaczanie odpływu ze zlewni niekontrolowanych Kanału Raduni podczas powodzi w 2001 r.
PublicationMetoda SCS (ang. Soil Conservation Service) pozwalająca wyznaczyć wysokość opadu efektywnego. Metoda geomorfologicznego hydrogramu jednostkowego do wyznaczenia hydrogramu odpływu ze zlewni niekontrolowanej. Aplikacja metody do sytuacji w zlewni Kanału Raduni na przykładzie powodzi z 2001 roku. Wyniki obliczeń dla potoków zasilających Kanał Raduni, odniesienie uzyskanych przepływów do dopływu z 2001 roku.
-
On Computing Curlicues Generated by Circle Homeomorphisms
PublicationThe dataset entitled Computing dynamical curlicues contains values of consecutive points on a curlicue generated, respectively, by rotation on the circle by different angles, the Arnold circle map (with various parameter values) and an exemplary sequence as well as corresponding diameters and Birkhoff averages of these curves. We additionally provide source codes of the Matlab programs which can be used to generate and plot the...
-
Optimization of chip removing system operation in circular sawing machine
PublicationThe paper presents the optimization of the wood chips removing system in the sliding table saw. Chips are generated during the cutting of the material. The attention was focused on the upper casing of mentioned system. The methodical experimental studies of the pressure distribution inside the casing during the wood chip removing operation for the selected rotational speed of saw blade with a diameter of 300 mm and 450 mm were...
-
Mechanical Properties of Aluminium Bracket Strengthening
PublicationThe aim of the research is laboratory investigation of aluminium brackets employed to fasten lightweight curtain walls to building facilities. Tensile loads perpendicular to end plates (vertical) were applied here. The author focused on the solutions intended to increase the load-carrying capacity of aluminium brackets applying the plain washer form A (DIN 125; ISO 7089), plain washer with an outer diameter about 3d (DIN 9021;...
-
THE USE OF FEM FOR DETERMINATION OF RESONANT FREQUENCIES OF CIRCULAR SAW BLADES WITH INDIRECT TEETH IN GULLETS
PublicationUnderstanding the dynamical properties of the circular saw blade is necessary, since, there is a really need for a stable work at working rotational speeds, which are determined by frequencies at which the circular saw blade tends to vibrate. It was observed that the resonant frequency depend on the circular saw blade shape, a collar diameter and on saw’s teeth shape. In the presented work an attention was paid to the effect of...
-
THERMAL ANALYSIS AND DESIGN OF HYBRID MICROCHANNEL-MICROJET TEST PROBE
PublicationThe paper presents the numerical investigation of a microjet- microchannel cooling module. In which microjets of water are impinging into the microchannels and forming a liquid film on the impingement surface. Applied technology takes benefits from two very attractive heat removal techniques. When lminar jets are impinging on the surface have a very high kinetic energy at the stagnation point, also in microchannels boundary layer...
-
Heat Transfer During Pool Boiling of Water, Methanol and R141b on Porous Coated Horizontal Tube Bundles
PublicationThis paper presents the results of experimental investigation of water, methanol and R141b refrigerant boiling on horizontal porous coated tube bundles supposed to represent a flooded-type evaporator. Experiments were carried out for a bundle of 19 tubes in triangular layout for two pitch-to-diameter ratio values – 1.7 and 2.0 – in atmospheric and sub-atmospheric pressure conditions. Average heat transfer coefficients – both local,...
-
Realizacja samoorganizującej się radiowej sieci ad hoc dedykowanej do pracy w środowiskach zamkniętych
PublicationW artykule przedstawiono realizację samoorganizującej się radiowej sieci ad hoc dedykowanej do pracy w środowiskach zamkniętych. Przedstawiono wyniki pomiarów propagacyjnych, z wykorzystaniem docelowej warstwy fizycznej, mające zweryfikować funkcjonowanie sieci w środowisku propagacyjnym promu pasażerskiego, które bezpośrednio oddziałuje na dynamikę sieci i strukturę opracowanego protokołu komunikacji radiowej. Na podstawie uzyskanych...
-
PROMETHEUS PROtocols for information Models librariEs Tested on HEritage of Upper Kama Sites
ProjectsProject realized in Department of Residential Architecture according to nember - 821870 - Prometheus agreement
-
Lawesson's reagent (LR) for direct thionation of hydroxamic acids. Substituent effect on LR reactivity
PublicationOkreślono zakres stosowalności i ogranicznia metody bezpośredniej tionacji kwasów hydroksamowych (HAA) za pomocą odczynnika Lawessona (LR). Przedmiotem badań było 35 HAA o wzorze ogólnym R1CON(R2)OH gdzie: R1 = alkil, aryl, benzyl, etoksykarbonylometylen, cynamyl, heteroaryl, a R2 = alkil, aryl. Ustalono, że wydajności kwasów tiohydroksamowych są niskie, gdy wyjściowy HAA posiada w swojej strukturze duże objętościowo reszty R1...
-
Manoeuvring forces on azimuthing podded propulsor model
PublicationThis paper presents the preliminary part of comprehensive manoeuvring open- water tests of a gas carrier model. The paper focuses on open water experiments with an azimuthing podded propulsor. The test program was carried out in the cavitation tunnel and the large towing tank of Ship Hydromechanics Division, Ship Design and Research Centre, Gdańsk. The pod was tested as a pushing unit with a 161.3 mm diameter propeller. Steering...
-
Non-adiabatic Effects in Pressure Drop Calculations in Flow Boiling and Flow Condensation in Minichannels
PublicationConsiderations presented in the paper relate both to the case of flow boiling and flow condensation in conventional channels as well as small diameter ones. Authors devoted all the possible attention that the modeling presented is applicable to the whole range of quality variation in both cases of condensation and boiling. The form of two-phase flow multiplier, which is a major factor in modeling presented here, should be capable...
-
Late Aortic Remodeling after Endovascular Repair of Complicated Type B Aortic Dissection—TEVAR Protects Only the Covered Segment of Thoracic Aorta
PublicationIntroduction: TEVAR is the preferred way of treatment of complicated type B aortic dissection. The purpose of the study was to assess the impact of TEVAR on aortic remodelling in the thoracic and abdominal segment in long-term follow-up. Methods: 23 patients with complicated type B aortic dissection were treated by TEVAR in years 2004-2012 in our Department. Aortic remodelling was rated based on preoperative and final follow-up...
-
Fabrication of polyurethane and polyurethane based composite fibers by the electrospinning technique for soft tissue engineering of cardiovascular system
PublicationElectrospinning is the unique technique, which provides forming of polymeric scaffolds for soft tissue engineering, which include tissue scaffolds for soft tissues of cardiovascular system. Such artificial soft tissues of cardiovascular system may possess mechanical properties comparable to native vascular tissues. Electrospinning technique gives the opportu nity to form fibres with nm- to μm-scale in diameter. The arrangement...
-
Influence of bush wear in water lubricated marine stern tube bearings with shaft misalignment
PublicationWater lubricated propeller shaft bearings are frequently employed on modern ships due to their advantages such as durability, simplicity and low price. Specific working conditions on ships cause shaft misalignment which often results in rapid wearing of bush and shaft. Shaft misalignment could be an effect of manufacturing or assembly faults but sometimes it appears due to hull or shaft deformation. The wearing process has influence...
-
Evaluation of Sicilian landraces of broccoli (B. oleracea var. italica Plenck) for quality traits
PublicationBrassica oleracea L. var. italica Plenck is one of the most popular vegetables which belong to Brassicaceae family. It is getting attention as an important source of bioactive compounds such as glucosinolates, and many other phytochemicals. In the frame of the H2020 BRESOV project, we evaluated three landraces (‘Broccolo nero', ‘Ramoso calabrese' and ‘Sparaceddu') and two commercial F1 hybrid cultivars (‘Marathon' and ‘Naxos')....
-
Phytoextraction and recovery of rare earth elements using willow (Salix spp.)
PublicationSoil and water contaminations are caused by rare earth elements (REEs) due to mining and industrial activities, that threaten the ecosystem and human health. Therefore, phytoremediation methods need to be developed to overcome this problem. To date, little research has been conducted concerning the phytoremediation potential of Salix for REEs. In this study, two Salix species (Salix myrsinifolia and Salix schwerinii) and two Salix...
-
Problemy obsługi użytkowników ruchomych, w skali mikro i makro, w sieciach IP.
PublicationPrzemieszczanie się użytkownika sieci, zarówno w obrębie budynku, jak też na obszarze miasta, kraju, bądź nawet kontynentu, wiąże się coraz częściej z potrzebą zapewnienia mu niezawodnj komunikacji. Istnieje szereg rozwiązań starających się sprostać temu wymogowi. W pracy przedstawiono podstawowe wymagania i oczekiwania użytkowników ruchomych. Zaprezentowano też wybrane protokoły wspierania mobilności w sieciach IP (Mobile IPv4,...
-
Prototyp bezprzewodowego systemu informacyjnego do monitorowania i alarmowania o stanie statku.
PublicationW artykule przedstawiono opis projektu i realizacji praktycznej prototypu urządzenia informacyjnego do bezprzewodowej wymiany danych pomiędzy systemami pokładowymi statku a telefonem lub tabletem z zainstalowanym systemem Android. Przedstawione urządzenie ma charakter doradczy i służy jedynie do monitorowania i ewentualnego alarmowania użytkownika o przekroczonym poziomie dopuszczalnym wartości mierzonej. Opisano dostępne dotychczas na...
-
Telekomunikacyjne wsparcie narzędziowe działań zapobiegawczych w zakresie akwizycji, dystrybucji i wymiany informacji w procesie koordynacji i współpracy służb
PublicationPotrzeba prowadzenia efektywnego procesu współpracy służb i organów odpowiedzialnych za bezpieczeństwo narodowe i międzynarodowe wymaga wsparcia ze strony nowoczesnych systemów telekomunikacyjnych, uwarunkowanych ich specjalnym przeznaczeniem. Z uwagi na charakter działań, rozwiązania dla potrzeb koordynacji i współpracy muszą być realizowane jako systemy rozproszone umożliwiające przenoszenie i przetwarzanie informacji multimedialnych,...
-
SIECI KOMPUTEROWE - (EiT) 2022/23
e-Learning CoursesStudent zapoznaje się z warstwowymi architekturami logicznymi sieci, klasyfikuje podstawowe problemy komunikacji sieciowej oraz identyfikuje i analizuje wybrane protokoły i mechanizmy sieci LAN i WAN