Search
Filters
total: 1288
-
Catalog
displaying 1000 best results Help
Search results for: BIOGAS MANUFACTURE
-
Corrigendum: Contrast Tempo of Movement and Its Effect on Power Output and Bar Velocity During Resistance Exercise
Publication -
Contrast Tempo of Movement and Its Effect on Power Output and Bar Velocity During Resistance Exercise
Publication -
The influence of plasma-sprayed coatings on surface properties and corrosion resistance of 316L stainless steel for possible implant application
Publication -
The method of analysis of damage reinforced concrete beams using terrestial laser scanning
PublicationThe authors present an analysis of the possibility to assess deformations and mechanisms of destructing bent reinforced concrete beams using the terrestrial laser scanning. As part of the experiments carried out at the Regional Laboratory of Construction of the Concrete Structures Division of the Civil and Environmental Engineering Faculty at Gdansk University of Technology, the reinforced concrete beams were subjected to destruction...
-
A novel approach in wood waste utilization for manufacturing of catalyst-free polyurethane-wood composites (PU-WC)
PublicationIn recent decades, due to the increase in environmental awareness and noticeable environmental degradation, the area of wood waste management has attracted increasing attention. The purpose of this study is to develop a new type of highly filled polyurethane wood-composite (PU-WC) by the utilization of large amount of wood wastes without addition of a catalyst. Although wood-plastic composites (WPCs) are widely known, there is...
-
Effect of bio-polyol molecular weight on the structure and properties of polyurethane-polyisocyanurate (PUR-PIR) foams
PublicationThe increasing interest in polyurethane materials has raised the question of the environmental impact of these materials. For this reason, the scientists aim to find an extremely difficult balance between new material technologies and sustainable development. This work attempts to validate the possibility of replacing petrochemical polyols with previously synthesized bio-polyols and their impact on the structure and properties...
-
Inline Waveguide Sharp-Rejection Bandpass Filters With Transmission Zeros Using Resonant Coupling Slots
PublicationThis work presents a design methodology for synthesizing a category of compact inline sharp-rejection waveguide cavity bandpass filters based on novel frequency-variant coupling (FVC) structures. These FVCs consist of a rectangular slot placed in the top broadwall of the WR-90 rectangular waveguide and loaded with an additional top cavity above the slot coupled through the slot. Both the slot and the top cavity resonate in the...
-
ANALYSIS OF TEMPERATURE DISTRIBUTIONS IN A GERMICIDAL CHAM-BER SUPPORTED BY LIGHT-ILLUMINATED GOLD NANORODS USING CFD-EQUATIONS AND A THERMAL CAMERA
PublicationSince the COVID-19 pandemic, protection against pathogenic germs and surface disinfection have become critical issues. Most effective bacteria/virus inactivation methods are either power-consuming or require using caustic chemical substances. Herein, thermal inactivation appears to be an affordable and effective technique as long as high temperatures are reached quickly and long-termly maintained. Therefore, the preparation of...
-
Improving the energy balance in wastewater treatment plants by optimization of aeration control and application of new technologies
PublicationThe methods to improve the energy balance of a wastewater treatment plant (WWTP) by optimization of aeration process control and application of innovative nitrogen removal technologies were overviewed in the study. The control of aeration based on the ABAC (Ammonia-Based Aeration Control) system allows not only for significant savings in electricity consumption, but it can also increase the efficiency of the denitrification process....
-
Losses and energy efficiency of drive motors and systems
PublicationLosses and energy efficiency of every drive motor must be presented as functions of physical quantities independent of losses in the motor. Such quantities are speed and load required by the machine or device driven by the motor, changing in the drive operating field. Speed and load of the motor decide of the instantaneous useful power of the motor and also in a differentiated way of kinds and values of losses occurring in the...
-
Losses and energy efficiency of drive motors and systems
PublicationLosses and energy efficiency of every drive motor must be presented as functions of physical quantities independent of losses in the motor. Such quantities are speed and load required by the machine or device driven by the motor, changing in the drive operating field. Speed and load of the motor decide of the instantaneous useful power of the motor and also in a differentiated way of kinds and values of losses occurring in the...
-
Calculations of notch stress factor of a thin-walled spreader bracket fillet weld with the use of a local stress approach
PublicationPresence of geometric notches in welded joints causes concentration of strains and stresses, therefore reducing fatigue strength of such joints. This article presents an analysis of stress concentrations in a fillet weld of a spreader mounting bracket on a small sailing yacht. The aim of this article is to direct the attention of designers, manufacturers and regulatory bodies to issues of fatigue cracks that form in brackets fastening...
-
Laboratory station for research of the innovative dry method of exhaust gas desulfurization for an engine powered with residual fuel
PublicationContemporary methods of exhaust gas desulfurization in marine engines are all expensive methods (4-5 million euro). This is, among other reasons, due to the limited market audience, but primarily due to the monop-olized position of manufacturers offering fabrication and assembly of this type of marine ship installations. Proposed as part of a research project financed by the Regional Fund for Environmental Protection and Maritime...
-
Sustainable development model for measuring and managing sustainability in the automotive sector
PublicationA growing number of organizations across a variety of industries are now pursuing sustainable management business goals to improve business efficiency, manage stakeholder expectations, or for legislative compliance. This is also the case for automotive manufacturing organizations who are under pressure from their stakeholders to manage and improve sustainability performance. This requires the development of credible measurement...
-
Electrical responses of Graphene-Silicon Schottky diodes toward nitrogen dioxide and tetrahydrofuran under irradiation
Open Research DataGraphene-Silicon Schottky junctions were utilized as gas sensors toward inorganic (nitrogen dioxide) and organic (tetrahydrofuran) gas qualitative and quantitative detection. The electrical responses of the sensors were collected in the form of current-voltage characteristics and measurements of current in time domain for a selected voltage bias. The...
-
Production of essential oils from in vitro cultures of Caryopteris species and comparison of their concentrations with in vivo plants
PublicationThe chemical composition of hydrodistilled essential oils obtained from aerial parts and roots of selected Caryopteris (‘bluebeard’) species (C. incana, C. mongolica, Caryopteris 9 clandonensis), as well as the newly established in vitro shoot and adventitious root cultures of the above plants, was analyzed by gas chromatography– mass spectrometry. Essential oil content and composition differed significantly depending on the type...
-
<title>Data quality management system (DQMS) for BAC detector in the ZEUS experiment at the HERA accelerator</title>
Publication -
Requirements and Effects of Surface Drip Irrigation of Mid-Early Potato Cultivar Courage on a Very Light Soil in Central Poland
Publication -
Changes in Water Quality for Sprinkler Irrigation in Selected Lakes of the Poznan Lake District
Publication -
Use of a wastewater recovery product (struvite) to enhance subtropical seagrass restoration
PublicationSeagrasses are in decline worldwide, and their restoration is relatively expensive and unsuccessful compared to other coastal systems. Fertilization can improve seagrass growth in restoration but can also release nutrients and pollute the surrounding ecosystem. A slow-release fertilizer may reduce excessive nutrient discharge while still providing resources to the seagrass's rhizosphere. In this study, struvite (magnesium ammonium...
-
Efficient Extraction of Fermentation Inhibitors by Means of Green Hydrophobic Deep Eutectic Solvents
PublicationThe methods for hydrogen yield efficiency improvements, the gaseous stream purification in gaseous biofuels generation, and the biomass pretreatment are considered as the main trends in research devoted to gaseous biofuel production. The environmental aspect related to the liquid stream purification arises. Moreover, the management of post-fermentation broth with the application of various biorefining techniques gains importance....
-
Collective citizens' behavior modelling with support of the Internet of Things and Big Data
PublicationIn this paper, collective human behaviors are modelled by a development of Big Data mining related to the Internet of Things. Some studies under MapReduce architectures have been carried out to improve an efficiency of Big Data mining. Intelligent agents in data mining have been analyzed for smart city systems, as well as data mining has been described by genetic programming. Furthermore, artificial neural networks have been discussed...
-
Some Artificial Intelligence Driven Algorithms For Mobile Edge Computing in Smart City
PublicationSmart mobile devices can share computing workload with the computer cloud that is important when artificial intelligence tools support computer systems in a smart city. This concept brings computing on the edge of the cloud, closer to citizens and it can shorten latency. Edge computing removes a crucial drawback of the smart city computing because city services are usually far away from citizens, physically. Besides, we introduced...
-
The influence of chitosan hydrogel cross-linking by agarose on coating physico-chemical properties
Open Research DataThis dataset contains various physicochemical analyses showing the effect of different concentration of chitosan and the cross-linking agent agarose. Each sample is labeled by C and A representing chitosan and agarose concentrations, respectively, while the exact amounts are depicted in the attached table. Fourier-transform infrared (FT-IR) spectroscopy...
-
Effect of illumination on noise of silicon solar cells
PublicationTransport and noise properties of silicon solar cells in darkness and under illumination have been studied. The measurements were carried out for both reverse and forward bias of the device. The changes in the sample behaviour are due to the variation of PN junction dynamic resistance and, also, the occurence of both 1/f and generation-recombination noise components
-
The role of slowly biodegradable organic compounds in a full-scale biological nutrient removal activated sludge systems
PublicationThe aim of this study was to determine the immediate effects of slowly biodegradable substrates on the denitrification capability and phosphate release/uptake interactions for a full-scale biomass process from two large wastewater treatment plants (WWTPs) located in the cities of Gdansk and Gdynia (northern Poland). Since it is hard to distinguish the slowly biodegradable substrate in a direct way, a novel procedure based on batch...
-
Analiza składu fazy gazowej wytwarzanej podczas fermentacji ciemnej
PublicationFermentacja ciemna umożliwia otrzymywanie bio-wodoru z substratów pochodzenia biologicznego, np. z biomasy ligno-celulozowej. Kontrola i właściwe sterowanie przebiegiem procesu fermentacji ciemnej wymaga bieżącego monitoringu składu powstającej fazy gazowej. W niniejszej pracy przedstawiono metodykę analizy składu fazy gazowej z wykorzystaniem techniki GC-TCD-FID. Zaproponowana metodyka umożliwia oznaczenie następujących gazów...
-
FERMENTACJA METANOWA MODELOWEGO WSADU KOMUNALNYCH ODPADÓW ORGANICZNYCH
PublicationFermentacja metanowa frakcji organicznej odpadów komunalnych pozwala na efektywny odzysk węgla z odpadów. Procesem beztlenowym jest zasadniczo fermentacja metanowa mezofilowa, jak i termofilowa, jednakże w procesie fermentacji termofilowej redukcja związków organicznych, niszczenie patogenów oraz produkcja biogazu zachodzi z większą wydajnością. Odpady komunalne charakteryzują się wysoką heterogenicznością składu, co może przyczyniać...
-
Metody zagospodarowania osadów ściekowych. Zagrożenia i szanse
PublicationWszystkie metody zagospodarowania osadów ściekowych można zaliczyć do dwóch podstawowych grup: przetwarzanie wysokotemperaturowe oraz biologiczną i chemiczną stabilizację. Do najbardziej popularnych metod zagospodarowania należą: suszenie, dezynfekcja wykorzystanie w rolnictwie, spopielanie lub piroliza z odzyskiem stałych i płynnych pozostałości procesowych, odzysk fosforu, odzysk biogazu, wykorzystanie w budownictwie oraz, najmniej...
-
Effect of operating conditions on N 2 O production in an anammox sequencing batch reactor containing granular sludge
PublicationNitrous oxide (N2O) is one of the gases with the greatest impact in the atmosphere due to its persistence and significant contribution to the greenhouse effect. This study provides an insight into the dynamics of N2O production in wastewater nitrogen removal systems. A 10 L sequencing batch reactor containing enriched anammox biomass was subjected to different operational conditions, i.e., temperature, feed time, NO2 /NH4 þ ratio...
-
Risks caused by microbiologically influenced corrosion in diesel fuel storage tanks
PublicationMicrobiologically influenced corrosion (MIC) poses serious problems for the petrochemical and refinery industries. Particularly favourable conditions for MIC arise in storage tanks and transmission pipelines for mixtures of diesel oil with the addition of a biocomponent (in Poland 7%). The best conditions for the development of MIC occur at the fuel-water interface, where microorganisms are provided with a source of food and water,...
-
Sposób wytwarzania bio-komponentów na bazie hydroksy-pochodnych polioli z biomasy roślinnej
InventionsPrzetwarzanie odpadów z biomasy roślinnej na poliole.
-
Impact of accuracy of weigh-in-motion data for pavement analysis and design: influence of temperature variations
PublicationThis paper investigates the effect of temperature on WIM-collected data using the steering axle load spectrum (SALS) and two datasets. The first dataset, provided by the WIM system operator, contains detailed raw data, while the second, supplied by the road authority, includes less detailed information but covers 46 stations with various sensor types and configurations: single-line bending plates and two-line quartz piezoelectric...
-
Deizm Adama Smitha
PublicationW artykule przedstawiono koncepcję Boga, jaką można zrekonstruować na podstawie ''Teorii uczuć moralnych'' szkockiego filozofa Adama Smitha (1723-1790). W świetle przeprowadzonych analiz koncepcję tę należy zaliczyć do szczególnego rodzaju deizmu, który akceptuje nieśmiertelność duszy i zgodne z rozumem tezy religii naturalnej.
-
Epidemiology, diagnosis, and prevention of tick-borne encephalitis in Poland and selected european countries – a position statement of the polish group of experts
Publication -
SEM and TEM Studies on <i>In-Situ</i> Cast Al–TiC Composites
Publication -
Heat treatment of ultrasonic electrodeposited Ni-W/ZrO2 nanocomposites
Publication -
A device for measuring heat flux on a rocket skin surface
PublicationA novel method for measuring heat flux on a surface is presented. It is an extensive upgrade of currently known heat flux sensors used mostly in civil engineering. As the thermal environment of launchers, especially sounding rocket can have an enormous negative effect on payload, careful considerations have to be taken in the process of preparing insulation. Usually, thermal data provided by the launch vehicle manufacturer is limited...
-
New patterns in the position of CEE countries in global value chains: functional specialisation approach
PublicationResearch background: High servitisation of manufacturing makes it impossible to separate services from manufactured goods properly, which implies difficulties in the assessment of the position of the country on the smile curve, i.e. in the proper assignment of products or services to one of the industrial process steps: pre-production, pure fabrication or post-production services. Therefore, we propose to use the business functions...
-
Impact of enhanced pretreatment on biological nutrient removal in municipal wastewater treatment plants
PublicationThe aim of this study was to determine the effect of enhanced primary treatment on: increasing primary sludge production for increased biogas production; reducing the organic load on downstream biological treatment processes and thereby reducing energy consumption for aeration; denitrification and enhanced biological phosphorus removal (EBPR) rates in the activated sludge system. For this purpose, three commercial organic polymers...
-
Optymalizacja warunków biosyntezy wybranych karotenoidów przez drożdże z rodzaju Rhodotorula
PublicationWprowadzenie. Karotenoidy to zróżnicowana grupa pigmentowych związków izoprenoidowych. Obecnie komercyjnie pozyskiwane są głównie z roślin lub na drodze syntezy chemicznej, z której uzyskiwanych jest 80 ÷ 90 % związków. Jednakże syntetyczne karotenoidy, w dużych dawkach, mogą być szkodliwe dla zdrowia ludzkiego, a odpady powstające w procesie ich produkcji stanowią zagrożenie dla środowiska. Alternatywą dla...
-
LED Light Sources and Their Complex Set-Up for Visually and Biologically Effective Illumination for Ornamental Indoor Plants
PublicationOrnamental plants are often used in indoor environments as part of biophilic design to improve the health and wellbeing of occupants, and to support sustainable, green architecture. Unfortunately, many plants do not thrive and need to be continuously replaced, which is economically unsustainable. The wavelengths and spectrum ratio of commonly used light sources such as light emitting diode (LED), and the lack of an appropriate...
-
Comparison of Tire Rolling Resistance Measuring Methods for Different Surfaces
PublicationThe rolling resistance of car tires is one of the most important parameters characterizing tires today. This resistance has a very significant contribution to the energy consumption of wheeled vehicles. The climate crisis has forced tire and car manufacturers to place great emphasis on the environmental impact of their products. Paradoxically, the development of electric vehicles has led to an even greater importance of rolling...
-
AVAILABILITY CONDITIONS AS A CRITICAL FACTOR IN PRODUCT CATEGORY MANAGEMENT IN SHAPING THE OFFER OF NON-ALCOHOLIC EQUIVALENTS OF ALCOHOLIC BEVERAGES
PublicationPurpose: To determine the availability of non-alcoholic wines and spirit substitutes in various distribution channels and understand the factors shaping store assortments to identify potential product strategies in category management. Design/methodology/approach: A literature review using desk research and a two-part study on the availability of non-alcoholic substitutes, utilizing observation and interview methods. Findings:...
-
Studies of alkaline hydrolysis of lignocellulosic biomass and conversion conditions of hydrolized products to biogas
ProjectsProject realized in Faculty of Chemistry according to UMO-2014/13/B/ST8/04258 agreement from 2015-02-11
-
Odzysk energii ze ścieków na przykładzie wybranych oczyszczalni komunalnych
PublicationPrzedmiotem pracy jest analiza procesów związanych z pozyskiwaniem i wykorzystaniem zasobów energii pochodzących ze ścieków w oczyszczalniach komunalnych. Badaniom poddano zarówno substraty (ścieki surowe) jak i produkty oczyszczania (osady ściekowe, ścieki oczyszczone). Ścieki surowe i oczyszczone analizowano pod kątem przydatności jako zasobów ciepła odpadowego. Osady ściekowe traktowano jako wyodrębnioną ze ścieków organiczno-mineralną...
-
Zdolność roślin do bioakumulacji. Wykorzystanie w fitoremediacji i fitogórnictwie
PublicationMetale ciężkie stanowią główny składnik skorupy ziemskiej. Występują również jako zanieczyszczenia w różnych typach próbek środowiskowych. Część z nich stanowi składniki niezbędne dla organizmów żywych, ale zarówno ich niedobór jak i nadmiar jest niebezpieczny. Wyniki badań nad wpływem metali ciężkich na organizm ludzki przyczyniły się do wzrostu zainteresowania nad technologiami remediacyjnymi. Technologie te zapewniają możliwość...
-
The application of Monod equation to denitrification kinetics description in the moving bed biofilm reactor (MBBR)
PublicationIn this paper, the kinetic constants Vmax and KCOD occurring in the Monod equation, which describe the denitrification process in the moving bed, are determined. For this purpose, a laboratory moving bed biofilm reactor (MBBR) was used. The filling of the reactor consisted of EvU Perl carriers. The experiment was carried out with an excess of nitrate, and denitrification rate was dependent on the concentration of external organic...
-
Biosilica from sea water diatoms algae—electrochemical impedance spectroscopy study
PublicationHere, we report on an electrochemical impedance study of silica of organic origin as an active electrode material. The electrode material obtained from carbonized marine biomass containing nanoporous diatoms has been characterised by means of XRD, IR, SEM and EIS. Dif- ferent kinds of crystallographic phases of silica as a result of thermal treatment have been found. The electrode is electrochemically stable during subsequent cyclic...
-
Potential applications of crude glycerol in polymer technology–Current state and perspectives
PublicationThe increasing use of bio-based fuels and fuel additives, among them biodiesel, causes significant surplus of crude glycerol on the market which creates new challenges in terms of its sustainable utilization. A lot of ways for the incorporation of this by-product into different branches of industry requires purification by expensive and complicated processes. Therefore, researchers are seeking for applications of untreated crude...