Filters
total: 2201
filtered: 1214
-
Catalog
Chosen catalog filters
displaying 1000 best results Help
Search results for: H REGULACJA OPTYMALNA
-
Characterization of structural, thermal and mechanical properties of bismuth silicate glasses
Publicationhe influence of heating and reduction processes on the structural, thermal and mechanical properties of bismuth-silicate glasses has been investigated. Two compositions of glasses: 40Bi2O3–60SiO2 (Bi0.57Si0.43Ox) and 27Bi2O3–73SiO2 (Bi0.43Si0.57Ox) were fabricated by a typical melt quenching technique. Then the reduction in hydrogen at 380 °C for 20, 42 or 67 h was performed. It was found that a 50 μm-thick layer was formed on...
-
Haemocompatibility of Modified Nanodiamonds
PublicationThis study reports the interactions of modified nanodiamond particles in vitro with human blood. Modifications performed on the nanodiamond particles include oxygenation with a chemical method and hydrogenation upon chemical vapor deposition (CVD) plasma treatment. Such nanodiamonds were later incubated in whole human blood for different time intervals, ranging from 5 min to 5 h. The morphology of red blood cells was assessed along...
-
Structural and mechanical properties of hydroxyapatite coatings formed by ion-beam assisted deposition
PublicationThe ion-beam assisted deposition (IBAD) is an advanced method capable of producing crystalline coatings at low temperatures. We determined the characteristics of hydroxyapatite Ca10(PO4)6(OH)2 target and coatings formed by IBAD using X-ray photoemission spectroscopy (XPS), X-ray diffraction (XRD), scanning electron microscopy (SEM), atomic force microscopy (AFM) and energy dispersive X-ray (EDX). The composition of the coatings'...
-
Collision-induced luminescence spectra of pyridine bombarded by 1000 eV He+ cations
PublicationHere we show collision-induced luminescence spectra measured for collisions of the He+cations with thearomatic six-membered ring of the pyridine molecule (C5H5N). Distinct emission bands due to the CH(A2Δ→X2Πr;B2Σ+→X2Πr;C2Σ+→X2Πr), CN(B2Σ+→X2Σ+), C2(d3Πg→a3Πu), and NH(A3Π→X3Σ−) transitions, aswell as atomic H, He, and C lines have been observed. Apart from the He atoms, all the emitters arise from thefragmentation of the pyridine...
-
Wpływ mikrosfer – frakcji popiołu odpadów paleniskowych - na strukturę i właściwości fizyczno-mechaniczne betonu
PublicationGospodarka odpadowa od wielu lat budzi duże zainteresowanie. Mając na uwadze potrzebę dalszego rozszerzania bazy materiałów pochodzenia mineralnego w budownictwie, zwrócono uwagę na drobną frakcję ziarnową odpadów paleniskowych - mikrosfery. Przedstawione wyniki badań w monografii udzielają odpowiedzi czy zastosowanie mikrosfer popiołowych, jako substancji aktywnej w środowisku zaczynu cementowego, może w znaczący sposób modyfikować...
-
Modelowanie wód podziemnych dla ustalenia zasobów eksploatacyjnych ujęć na przykładzie Trójmiasta
PublicationAglomeracja Trójmiejska obejmuje zróżnicowany geomorfologicznie obszar. Wody podziemne ujmowane są na obszarze wysoczyzny, w strefie zasilania i przepływu wód podziemnych, a także na obszarze nizin nadmorskich, w strefie ich drenażu. W artykule przestawiono wyniki badań modelowych prowadzonych w celu ustalenia zasobów eksploatacyjnych wód z utworów plejstocenu na dwóch ujęciach zlokalizowanych w części wysoczyznowej: Gdynia Wiczlino...
-
Functional safety and human factors
PublicationRozdział przedstawia istotny problem uwzględnienia czynników ludzkich (H&OF) w analizie bezpieczeństwa funkcjonalnego, które wpływają istotnie na bezpieczeństwo przemysłowych obiektów podwyższonego ryzyka, nie ujęty jednak w normach bezpieczeństwa funkcjonalnego. Przedstawia się metody analizy niezawodności człowieka (HRA) w kontekście tych czynników, które wpływają na błędy człowieka. Czynniki ludzkie i organizacyjne powinny być...
-
Studies on removal of Zn(II), Cd(II) and Pb(II) ions in polymer inclusion membrane transport with calix[4]-crown-6 derivatives
PublicationZbadano selektywność procesu wydzielania jonów cynku(II), kadmu(II) i ołowiu(II) z wodnych roztworów azotanowych zawierających równomolową mieszaninę tych trzech metali (cMe= 0,01 M) w procesie transportu przez polimerowe membrany inkluzyjne (PIM) przy użyciu w roli przenośników jonów pochodnych kaliks[4]-korony-6. Membrany typu PIM syntezowano z trójoctanu celulozy (nośnik), eteru o?nitrofenylopentylowego (pastyfikator) i pochodnych...
-
Window frame integrable air recuperation minichannel/minigap heat exchanger
PublicationThis article describes an evaluation of mini heat exchangers operation as a decentralized mechanical ventilation system with recuperative heat recovery that can be integrated into the window frame. The relatively small yet efficient air recuperation system allows for retrofitting existing buildings by reducing the overall energy consumption and thus the CO2 emissions. The proposed design, unlike existing systems, is easy to scale...
-
Assestment of the anti-cancer activity of the copper complexes with imidazole and pivalato ligands
PublicationDespite the development of science and technology progress so far there have not been found effective drugs for cancer. Many coordination compounds were investigated due to their antitumor potential. The most known cis-diamminedichloroplatinum(II) is used as anti-cancer therapeutic agent. The copper complexes are the coordination compounds possessing anti-tumour properties. Their capability to kill cancer cells is mainly linked...
-
New Approaches for Escherichia coli Genotyping
PublicationEasy-to-perform, fast, and inexpensive methods of differentiation of Escherichia coli strains beyond the species level are highly required. Herein two new, original tools for genotyping of E. coli isolates are proposed. The first of the developed method, a PCR-RFLP (polymerase chain reaction-restriction fragment length polymorphism) test uses a highly variable fliC gene, encoding the H antigen as a molecular target. The designing...
-
Electrocatalytic performance of oxygen-activated carbon fibre felt anodes mediating degradation mechanism of acetaminophen in aqueous environments
PublicationCarbon felts are flexible and scalable, have high specific areas, and are highly conductive materials that fit the requirements for both anodes and cathodes in advanced electrocatalytic processes. Advanced oxidative modi- fication processes (thermal, chemical, and plasma-chemical) were applied to carbon felt anodes to enhance their efficiency towards electro-oxidation. The modification of the porous anodes results in increased...
-
Activated sodium percarbonate-ozone (SPC/O3) hybrid hydrodynamic cavitation system for advanced oxidation processes (AOPs) of 1,4-dioxane in water
PublicationHydrodynamic cavitation (HC) was employed to activate sodium percarbonate (SPC) and ozone (O3) to degrade recalcitrant 1,4-dioxane. The degradation efficiency > 99 % with a rate constant of 4.04 × 10−2 min−1 was achieved in 120 min under the optimal conditions of cavitation number (Cv) 0.27, pH 5, molar ratio of oxidant to pollutant (rox) 8, ozone dose of 0.86 g h−1 under 25 ± 2 °C with initial concentration of 1,4-dioxane 100...
-
A global atmospheric electricity monitoring network for climate and geophysical research
Publication -
Vitiligo pathogenesis: autoimmune disease, genetic defect, excessive reactive oxygen species, calcium imbalance, or what else?
Publication -
Dissecting gamma frequency activities during human memory processing
PublicationGamma frequency activity (30-150 Hz) is induced in cognitive tasks and is thought to reflect underlying neural processes. Gamma frequency activity can be recorded directly from the human brain using intracranial electrodes implanted in patients undergoing treatment for drug-resistant epilepsy. Previous studies have independently explored narrowband oscillations in the local field potential and broadband power increases. It is not...
-
The effect of heat treatment of hardwood on the specific cutting resistance
PublicationW pracy przedstawiono wyniki badań mocy skrawania podczas przecierania modyfikowanego i niemodyfikowanego termicznie drewna dębowego i jesionowego na pilarce ramowej PRW15M. W pierwszym etapie badań, graniakowe próbki drewna dębowego i jesionowego były modyfikowane termicznie za pomocą przegrzanej pary (temperatura 197C, czas 4 h) w parzelni wysokotemperaturowej, w warunkach przemysłowych. Następnie, wyznaczono właściwe powierzchniowe...
-
Nonlinear modeling of traction transformer with coiled iron core for dynamic simulation
PublicationW referacie przedstawiono wyprowadzenie zastępczego modelu obwodowego transformatora trakcyjnego o rdzeniu zwijanym do analiz zachowania sie transformatora w układzie napedowym jednostki trakcyjnej. Model zakłada nieliniowa charakterystyke magnesowania B-H i anizotropowe właściwosci magnetyczne i elektryczne zwijanego rdzenia. Wyprowadzenie modelu oparto na metodzie energetycznej Lagrange'a. Uzwojenia zostały zamodelowanie jako...
-
1,1,2,2-Tetrakis(diisopropylamino)diphosphane
PublicationTytułowy związek otrzymano w trakcie badań raktywności (i-Pr2N)2P-P(SiMe3)Li z Cp2ZrCl2 (Cp-cyklopentadienyl). Strukturę C24H56N4P2 wyznaczono metodą rentgenowskiej analizy strukturalnej. Wiązanie P-P należy do najdłuższych wśród tego typu wiązań wyznaczonych dla niekoordynowanych difosfanów. W sieci krystalicznej obserwuje się nieuporządkowanie...
-
Wykorzystanie włókna węglowego do wzmocnienia lanych elastomerów uretanowych
PublicationPrzedstawiono wyniki badań lanych elastomerów uretanowych, zawierających włókno węglowe statystycznie rozlokowane. Prepolimeryuretanowe otrzymano w reakcji 4,4-diizocyjnianu difenylometanu (MDI) z oligoestrolem (Poles 55/20). Do prepolimeru wprowadzanokrótkie włókno w ilości od 1% do 20% mas. Jako przedłużacz prepolimeru zastosowano glikol butylenowy (BDO) zawierający rozpuszczony katalizator 1,4-diazabicyklo[2.2.2]oktan(DABCO)....
-
Relationship between electronic structure and geometry of silanethiols and their derivatives. Elucidation of copper group silanethiolates
PublicationWyznaczono strukturę elektronową wybranych silanotioli X3SiSH (dla X=H, C2H5, OCH3, F, Cl i Br) oraz powstalych z nich anionów. Geometrię i funkcje falowe wyznaczono przy użyciu teorii funcjonałów gęstości elektronowej DFT. Przeanalizowano wpływ efektów anomerycznych oraz wielkości calki nakładania sigma(Si-S) na obserwowane skrócenie wiązania Si-S przy deprotonowaniu silanotioli. Podano nowe wyjaśnienie wyjątkowo niskiej kwasowości...
-
Wpływ odkształcenia na parametry stereometryczne powłok z faz międzymetalicznych NiAl i Ni3Al = Strain intensity effect on stereometrical properties at the NiAl i Ni3Al coating
PublicationWspółcześnie materiały na osnowie faz międzymetalicznych są przedmiotem badań wielu ośrodków naukowo-badawczych w kraju.Stopy na osnowie uporządkowanych faz międzymetalicznych z udziałem aluminium posiadają dużą odporność na utlenianie i korozję wżerową, a także wysoką wytrzymałość zmęczeniową oraz żaroodporność. Dlatego znalazły one zastosowanie do produkcji części maszyn do pracy w trudnych warunkach eksploatacyjnych (łopatki...
-
Entropy of water calculated from harmonic approximation: estimation of the accuracy of method
PublicationSome molecular dynamics simulations were performed for liquid TIP4P and SPC water at a constant density (1.00 g/cm(3)) and within the temperature range of 5-90 degrees C. By using harmonic approximation, both the entropy of water S-H and the specific heat c(v) were calculated, and the results were compared to literature data. It was found that harmonic approximation overestimates absolute entropy of TIP4P water by 5.6 J/mol K (similar...
-
Konstrukcja i badania elementów przekazujących szprota bałtyckiego w procesie obróbki
PublicationW pracy przedstawiono metodę masowego przetwarzania małych ryb oraz budowę i zasadę działania maszyny do masowego, wielostrumieniowego odgławiania i patroszenia szprota bałtyckiego o przepustowości 500 - 1200 kg/h przy zakresie wielkości ryb 10-15 cm. Wykazano wpływ zależności kinematyczno-geometrycznych pracy zespołu przekazującego szprota bałtyckiego z zespołu orientującego do zespołu obróbczego, na wskaźniki skuteczności jego...
-
Development of an Analytical Protocol for Determination of Cyanide in Human Biological Samples Based on Application of Ion Chromatography with Pulsed Amperometric Detection
PublicationA simple and accurate ion chromatography (IC) method with pulsed amperometric detection (PAD) was proposed for the determination of cyanide ion in urine, sweat, and saliva samples. The sample pretreatment relies on alkaline digestion and application of Dionex OnGuard II H cartridge. Under the optimized conditions, the method showed good linearity in the range of 1–100 μg/L for urine, 5–100 μg/L for saliva, and 3–100 μg/L for sweat...
-
Thermoelectric properties of bismuth-antimony-telluride alloys obtained by reduction of oxide reagents
PublicationThe BieSbeTe alloys with different Bi/Sb/Te ratio were fabricated by an innovative method. For that purpose the oxide reagents were melted at high temperature, then quenched to form pellets, milled to a powder and finally reduced in hydrogen at various temperatures. Complex structures consisting of connected thin layers forming a continuous path between nano- and micrometer size grains have been obtained. The electrical conductivity,...
-
The dying medium temperature impact on the final moisture content of pine wood at constant drying time
PublicationThe results of final moisture content of pine wood (Pinus sylvestris L.) after drying process are presented. The wood in the experiments was taken from the northern part of Pomeranian region in Poland. The drying process was performed in the experimental chamber equipped with the micro-jet heat exchanger. The air at temperatures of 40°C, 60°C, 80°C, 100°C and 120°C with relative humidity about 60% and atmospheric pressure was the...
-
Low temperature processed MnCo2O4 and MnCo1.8Fe0.2O4 as effective protective coatings for solid oxide fuel cell interconnects at 750 °C
PublicationIn this study two materials, MnCo2O4 and MnCo1.8Fe0.2O4 are studied as potential protective coatings for Solid Oxide Fuel Cell interconnects working at 750 °C. First powder fabrication by a modified Pechini method is described followed by a description of the coating procedure. The protective action of the coating applied on Crofer 22 APU is evaluated by following the area specific resistance (ASR) of the scale/coating for 5500...
-
Polyester-urethanes modified with gelatine for tissue scaffolds
PublicationNovel aliphatic PU foams, modified with gelatine, were obtained in a one-step polymerization process. Hard segments were obtained from 1,6-hexamethylene diisocyanate (HDI) and chain extenders 1,4-butanediol (BDO) or 2-(2-(2-hydroxyethoxy)ethoxy)ethanol (TG), soft segments were obtained from poly(ethylene-buthylene adipate) (EBO) polyol. We examined the PU foams for their sorption capability in canola oil, saline (0.9% NaCl water...
-
Photoconduction and magnetic field effect on photoconduction in hole-transporting star-burst amine (m-MTDATA) films
PublicationPhotoconduction and magnetic field effect on photoconduction have been investigated as a function of electric field strength, excitation light intensity and wavelength in vacuum evaporated films of m-MTDATA (4,4′,4″-tris(N-(3-methylphenyl)-N-phenylylamino) triphenylamine), the starburst amine commonly used as hole-transporting material in organic light-emitting diodes. The photocurrent is found to be generated by the singlet exciton...
-
A Linear Phase Filter in Quadruplet Topology With Frequency-Dependent Couplings
PublicationThis letter presents a design of a linear phase microwave bandpass filter. The filter is composed of four resonators arranged in the quadruplet topology. Making the cross and one direct coupling dispersive gives additional design flexibility. The first advantage of using frequency-dependent couplings is the possibility to chose an arbitrary location of a pair of complex transmission zeros (TZs) in the s-domain. The second one is...
-
Application of Diagnostic Ratios of PAHs to Characterize the Pollution Emission Sources
PublicationThe paper summarizes the potential of application of parent polycyclic aromatic hydrocarbons (PAHs) to identify their emission sources. Four parent PAHs diagnostic ratios are used for this purpose: anthracene/(anthracene + phenanthrene), fluoranthene/(fluoranthene + pyrene), benzo[a]pyrene/(benzo[a]pyrene + chryzene) and indeno[1,2,3-c,d]pyrene/(indeno[1,2,3-c,d]pyrene + benzo[g,h,i]perylene). The compounds of each ratio have the...
-
Urchin-like TiO2 structures decorated with lanthanide-doped Bi2S3 quantum dots to boost hydrogen photogeneration performance
PublicationThe formation of heterojunctions between wide- and narrow-bandgap photocatalysts is commonly employed to boost the efficiency of photocatalytic hydrogen generation. Herein, the photoactivity of urchin-like rutile particles is increased by decorating with pristine as well as Er- or Yb-doped Bi2S3 quantum dots (QDs) at varied QD loadings (1–20 wt%) and doping degrees (1–15 mol%), and the best hydrogen evolution performance is achieved at...
-
Fabrication and photoactivity of organic-inorganic systems based on titania nanotubes and PEDOT containing redox centres formed by different Prussian Blue analogues
PublicationHerein, the heterojunction composed of an inorganic substrate: ordered hydrogenated titania nanotubes (H-TiO2NTs) and a deposited organic film: poly(3,4-ethylenedioxythiophene) (PEDOT) is reported. The conducting polymer is modified with different transition metal haxacyanoferrates (Mehcf), wherein as metal: copper, iron, cobalt and nickel are introduced. The presence of various metal centres provides characteristic redox activity...
-
The influence of synthesis method on the microstructure and catalytic performance of Y 0.07 Sr 0.93 Ti 0.8 Fe 0.2 O 3-δ in synthetic biogas operated solid oxide fuel cells
PublicationThe Y0.07Sr0.93Ti0.8Fe0.2O3-δ (YSTF) material was fabricated using three different synthesis methods: modified polymer precursor method (MPP), Pechini method and a solid state reaction method. It was applied as an anode catalytic material for biogas reforming in solid oxide fuel cells. Clear differences in the microstructure of fabricated catalytic layers were found, mainly with respect to a grain size and distribution of grains....
-
Homoclinics for singular strong force Lagrangian systems in R^N
PublicationWe will be concerned with the existence of homoclinics for second order Hamiltonian systems in R^N (N>2) given by Hamiltonians of the form H(t,q,p)=Φ(p)+V(t,q), where Φ is a G-function in the sense of Trudinger, V is C^2-smooth, periodic in the time variable, has a single well of infinite depth at a point ξ and a unique strict global maximum 0 at the origin. Under a strong force type condition aroud the singular point ξ, we prove...
-
Role of methylation in electron scattering on X(CH3)4 (X= C, Si, Ge) molecules (2)
PublicationTo investigate how replacement of H atom with methyl group (CH3) – in tetrahedral compounds of carbon, silicon and germanium – affects electron scattering process, total cross sections (TCS) for electron scattering from C(CH3)4, Si(CH3)4 and Ge(CH3)4 molecules have been compared with data for CH4, SiH4 and GeH4 molecules. All examined data have been obtained with the same experimental setup. The shape of all discussed TCS energy...
-
The effect of Sr and Mg substitutions on structure, mechanical properties and solubility of fluorapatite ceramics for biomedical applications
PublicationIonic substitutions play important role in the modifications of biological apatites. Recently, attention has been focused on the co-doping effects on the functional properties of apatite-based biomaterials. In this research work, the dense samples of fluorapatites, Ca10(PO4)6F2 and Ca8MgSr(PO4)6F2, were produced after sintering at 1250 °C for 6 h in air. Structural characterization carried out with XRD, IR, Raman and SEM, confirmed...
-
Fluid–solid interaction on a thin platelet with high-velocity flow: vibration modelling and experiment
PublicationThe paper concerns the nonlinear behaviour of a thin platelet that is streamlined in an aerodynamic tunnel. The air velocity in the aerodynamic tunnel was at 858.9 km/h or 0.7 Ma (Ma—Mach number is a dimensionless quantity in fluid dynamics representing the ratio of flow velocity past a boundary to the local speed of sound). This experiment was numerically simulated using FSI (fluid–solid interaction) tools, namely the coupling...
-
The study of structure and surface morphology of lithium titanate sol-gel derived thin films
PublicationIn this paper the structure and the surface morphology of lithium titanate (LTO) thin films are presented. Nanocrystalline thin films were prepared by sol–gel method. To examine the influence of the annealing time on as-prepared films crystallization, the coatings were heated at different temperatures in the range of 500 °C–600 °C for 10, 20, 40 and 80 h. The structure of the obtained material was investigated using the X-ray diffraction...
-
Struktury nanokrystaliczne w układzie V O: wytwarzanie i właściwości
PublicationTlenki wanadu charakteryzują się ogromną różnorodnością właściwości fizycznych i chemicznych, dzięki czemu w ciągu ostatnich kilkudziesięciu lat były intensywnie badane. Właściwości te wynikają bezpośrednio z możliwych struktur jakie mogą przyjmować tlenki wanadu. W układzie V–O można otrzymać wiele różnych związków, przy czym do głównych tlenków wanadu zalicza się V2O5, VO2, V2O3 oraz VO, w których wanad znajduje się odpowiednio...
-
Molecular self-assembly and optical activity of chiral thionooxalamic acid esters
PublicationZsyntezowano kilka optycznie czynnych estrów dietylowych kwasu bis(tiooksamowego). Związki te, z powodu ich zdolności do tworzenia ze sobą komplementarnych cyklicznych wiązań wodorowych, są potencjalnie użytecznym materiałem budulcowym większych układów supramolekularnych. Odpowiednie układy modelowe otrzymano z optycznie czynnych 1,2-diamin, które poddano acylowaniu chlorooksooctanem etylu, a następnie otrzymane półprodukty tionowano...
-
Induction of G2/M phase arrest and apoptosis of human pancreatic cancer BxPC-3 cells by potenet antitumor 1-nitroacridine derivative C-1748
PublicationPancreatic ductal adenocarcinoma (PDA) is among the most lethal human cancers, in part because it is insensitive to many chemotherapeutic drugs. Gemcitabine still remains the best chemotherapeutic agent available for the treatment of advanced pancreatic cancer. However, gemcitabine treatment results in only a marginal survival advantage. Thus, there is a strong need for the continuous development of novel therapeutic agents...
-
Kinetics of Cross-Linking Reaction of Epoxy Resin with Hydroxyapatite-Functionalized Layered Double Hydroxides
PublicationThe cure kinetics analysis of thermoset polymer composites gives useful information about their properties. In this work, two types of layered double hydroxide (LDH) consisting of Mg2+ and Zn2+ as divalent metal ions and CO32− as an anion intercalating agent were synthesized and functionalized with hydroxyapatite (HA) to make a potential thermal resistant nanocomposite. The curing potential of the synthesized nanoplatelets in the...
-
FUNKCJONALIZOWANIE 2H-TIAZOLO[3,2-α]PIRYDYN-5-(3H)-ONÓW, ALTERNATYWNA ŚCIEŻKA SYNTEZY NOWYCH PILICYDÓW
PublicationUropatogenne szczepy Escherichia coli są przyczyną blisko 80% przypadków zakażeń dróg moczowych (ang. UTI- Urinary tract infection). Ponadto, aż 30% odmiedniczkowego zapalenia nerek występującego u ciężarnych kobiet jest spowodowane przez szczepy E.coli Dr+. Szerząca się lekooporność bakterii i trudności w leczeniu UTI wymusiły na środowiskach naukowych poszukiwania nowych związków chemicznych pełniących rolę chemoterapeutyków. Na...
-
Właściwości elastomerów estrouretanowych napełnionych skrobią
PublicationPrzedstawiono wyniki badań wpływu skrobi na właściwości mechaniczne oraz chemiczne elastomerów estrouretanowych. Syntezy poliuretanów wykonano dwuetapowo poprzez wprowadzenie do prepolimeru skrobi (I etap) w postaci stałej. Następnie prepolimery przedłużano roztworem katalizatora DABCO w glikolu butylenowym (II etap). Uzyskane materiały usieciowano.Twardość i elastyczność przy odbiciu zmieniała się nieznacznie. Wytrzymałość na...
-
Hazards of a flooding event in the city of Gdansk and possible forms of preventing the phenomenon – case study
PublicationThe main objective is to examine the urban flood hazard in the city of Gdansk and to determine the possibilities of preventing this phenomenon. Hydrological and hydraulic modeling was used for the case study analysis of urban flood in Strzyża basin, applying the HEC-HMS and HEC-RAS systems. The result of modeling with the assumption of torrential rainfall with a duration of t = 1 h (from 35 to 58 mm) is the probability of pluvial...
-
The Ellenbogen's "Matter as Software" Concept for Quantum Computer Implementation: III. Selection of X@C60 Molecular Building Blocks (MBBs) for Tip-Based Nanofabrication (TBN) of Trapped Neutral Atom Quantum Computing Devices
PublicationThe selection of guest atoms X of X@C60 MBBs for TBN of trapped neutral atom quantum computing devices is reported. Assuming the all-optical quantum computing as a final target stage, the two criteria are most important: the charge q accumulated on the C60 host must be as low as possible, and the atom X must have one or more available excited states within the band falling into the low energy window of neutral C60 molecule electronic...
-
The Ellenbogen's "Matter as Software" Concept for Quantum Computer Implementation: II Bonding Between the C60 and X@C60 Molecules as Available Molecular Building Blocks (MBBs) for Tip-Based Nanofabrication (TBN) of Quantum Computing Devices
PublicationThe binding energy, BE of the X@C60-X@C60 homodimer and the X@C60-Y@C60 heterodimer resulting from the bond formation between the occupied X@C60 MBB and the C60 molecule was studied by means of semiempirical PM7 calculations, where X and Y denote atoms from H to Bi, excluding Tc and lanthanides. All possible combinations of N = 68 guest atoms were considered, which resulted in K = 2346 of different calculated dimers of (X@C60-Y@C60)...
-
A grey box model of glucose fermentation and syntrophic oxidation in microbial fuel cells
PublicationIn this work, the fermentative and oxidative processes taking place in a microbial fuel cell (MFC) fed with glucose were studied and modeled. The model accounting for the bioelectrochemical processes was based on ordinary, Monod-type differential equations. The model parameters were estimated using experimental results obtained from three H-type MFCs operated at open or closed circuits and fed with glucose or ethanol. The experimental...