Filters
total: 995
filtered: 815
Search results for: POSITIONER
-
Assessment of the Steering Precision of a Hydrographic Unmanned Surface Vessel (USV) along Sounding Profiles Using a Low-Cost Multi-Global Navigation Satellite System (GNSS) Receiver Supported Autopilot
Publicationhe performance of bathymetric measurements by traditional methods (using manned vessels) in ultra-shallow waters, i.e., lakes, rivers, and sea beaches with a depth of less than 1 m, is often difficult or, in many cases, impossible due to problems related to safe vessel maneuvering. For this reason, the use of shallow draft hydrographic Unmanned Surface Vessels (USV) appears to provide a promising alternative method for performing...
-
Investigation of Continuous Wave Jamming in an IEEE 802.15.4 Network
PublicationThis paper presents how continuous wave jamming affects IEEE 802.15.4 network. To this end, an office-based measurement setup has been proposed. Within the measurement area, 25 nodes have been set up in order to create a IEEE 802.15.4 tree-based test network structure. A dedicated jamming device that generates and transmits a continuous wave signal has been developed. Several tests have been conducted and presented to demonstrate...
-
Shallow Water Equations as a Mathematical Model of Whitewater Course Hydrodynamics
PublicationPredicting the positions of local hydraulic phenomena, as well as accurately esti-mating the depth and velocity of the water flow are necessary to correctly config-ure a whitewater canoeing course. Currently, a laboratory and full 3D CFD model-ing are typically used in the design process to meet these needs. The article points to another possibility which can be useful at the preliminary stage of the design. The authors show that...
-
Characteristics of La 0.8 Sr 0.2 Ga 0.8 Mg 0.2 O 3-δ -supported micro-tubular solid oxide fuel cells with LaCo 0.4 Ni 0.6-x Cu x O 3-δ cathodes
PublicationIn this study, micro-tubular solid oxide fuel cells (T-SOFCs) with extruded La0.8Sr0.2Ga0.8Mg0.2O3-δ (LSGM) electrolyte as the mechanical support and LaCo0.4Ni0.6O3-δ (LCNO) or LaCo0.4Ni0.4Cu0.2O3-δ (LCNCO) as cathodes were prepared and characterized. Partial substitution of Cu for the Ni-ion positions in the LCNO lattices was found to significantly enhance the densification and accelerate the grain growth. The porosity-corrected...
-
Photosensitive and pH-dependent activity of pyrazine-functionalized carbazole derivative as promising antifungal and imaging agent
PublicationCarbazole skeleton plays a significant role as a structural scaffold of many pharmacologically active compounds. Pyrazine-functionalized carbazole derivative was constructed by coupling 2-amino-5-bromo-3-methylaminepyrazine (ABMAP) into 3 and 6 positions of the carbazole ring. Multi-experimental methods were used, e.g., potentiometric, spectroscopic (ATR, UV, XRD powder,1H and13C NMR), electrochemical (cyclic voltammetry), and...
-
Visegrád countries' scientific productivity in the European context: a 10-year perspective using Web of Science and Scopus
PublicationMeasuring the growth of research productivity is a core element of performance in the higher education sector. This paper aims to analyse the scientific productivity of the Visegrád Group countries (2010-2019) based on data from the WoS and Scopus databases as well as data from secondary sources (demographic and socio-economic factors). Quantitatively, although Poland has the highest output, this is due to its comparative size,...
-
Evolutionary Sets of Safe Ship Trajectories: simulation results
PublicationThe Evolutionary Sets of Safe Ship Trajectories is a method solving multi-ship encounter situations. For given positions and motion parameters the method finds a near optimal set of safe trajectories of all ships involved in an encounter. The paper briefly presents foundations of the method and focuses on simulation results for selected test cases based on the Baltic Basin. The computer simulations cover both open waters and restricted...
-
Tracking Moving Objects in Video Surveillance Systems with Kalman and Particle Filters – A Practical Approach
PublicationThis Chapter focuses on the first type of object tracking algorithms, namely on Kalman and particle filters. A theory of these algorithms may be found in many publications, there are also reports on implementation of these approaches to object tracking in video. However, developers of VCA systems still face two important problems. The first one is related to obtaining accurate measurements of positions and sizes of the tracked...
-
Collaborative Delivery by Energy-Sharing Low-Power Mobile Robots
PublicationWe study two variants of delivery problems for mobile robots sharing energy. Each mobile robot can store at any given moment at most two units of energy, and whenever two robots are at the same location, they can transfer energy between each other, respecting the maximum capacity. The robots operate in a simple graph and initially each robot has two units of energy. A single edge traversal by an robot reduces its energy by one...
-
A multiparameter simulation-driven analysis of ship turning trajectory concerning a required number of irregular wave realizations
PublicationIn times of progressive automation of the marine industry, accurate modeling of ship maneuvers is of utmost importance to all parties involved in maritime transportation. Despite the existence of modern collisionavoidance algorithms using 6DOF motion models to predict ship trajectories in waves, the impact of stochastic realization of irregular waves is usually neglected and remains under-investigated. Therefore, herein, this phenomenon...
-
A novel (Ti/Ce)UiO-X MOFs@TiO2 heterojunction for enhanced photocatalytic performance: Boosting via Ce4+/Ce3+ and Ti4+/Ti3+ redox mediators
PublicationTitanium-substituted cerium-oxo-based UiO MOFs with terephthalate linkers modified by various groups (–Br, –NH2, –NO2) or their derivatives (N-heterocyclic or biphenyl groups) were combined with titanium dioxide in a multistep route to obtain a core-shell-like architecture. DFT simulations showed that Ce- and bimetallic Ti/Ce- MOFs exhibited different charge compensation. Extended characterization revealed the formation of heterojunctions between...
-
Politics and urban artifacts in cities: what are they and how are they interconected?
PublicationThis research, analyses the effect of politics on a city and its image, via their control over the formation or changes on urban artifacts. It analyses the concepts introduced in Aldo Rossi’s architectural monograph, The Architecture of the City, in the chapter titled ‘Politics as Choice’, and his idea that a city’s image is a reflection of its political institutions and the choices people in authority make. Monuments and architecture...
-
A ship domain-based model of collision risk for near-miss detection and Collision Alert Systems
PublicationThe paper presents a new model of ship collision risk, which utilises a ship domain concept and the related domain-based collision risk parameters. An encounter is here described by five variables representing: degree of domain violation (DDV), relative speed of the two vessels, combination of the vessels’ courses, arena violations and encounter complexity. As for the first three variables, their values can be directly computed...
-
Do Phenyl Substituents Affect the Properties of Azobenzocrown Derivatives?
PublicationNew products of photo- and thermal rearrangements of 19-membered azoxybenzocrown with phenyl substituents in benzene rings in the para positions to oligooxyethylene fragments are characterized. The yields of photochemical transformations depend on the solvent. Para-hydroxyazocrown is formed with yields over 50% in propan-2-ol. Ortho-hydroxyazobenzocrown is obtained with yields up to 70% in toluene/acetic acid mixture. Macrocyclic...
-
Comparison of pavement noise properties on selected road sections using different CPX measuring systems: self-powered vehicle and special test trailer
PublicationThe recently published ISO standard intended to measure the noise properties of road surfaces in a standardized method (ISO 11819-2:2017) precisely defines measurement procedure of the influence of road surface on traffic noise. According to it, two types of test vehicles may be utilized: a self-powered vehicle fitted with one or more test tyres and a trailer towed by a separate vehicle with one or more test tyres mounted on the...
-
STILL ‘FEW, SLOW AND LOW’? ON THE FEMALE DIMENSION OF TECHNOLOGY, LABOUR MARKETS AND ECONOMIC ACTIVITY: EVIDENCE FOR THE PERIOD OF 1990-2017
PublicationThe known in empirical economics question ‘Why so Few? Why so Slow? Why so Low?’ refers here to the persistently small number of women involved in innovative activities, the slowness of change in the inequalities between women and men in these fields, and women’s continuing lower rank in business and academic positions. In developing countries, women`s labour and entrepreneurial activity remains an ‘untapped resource’ for economic...
-
Numerical Analysis of Recharge Rates and Contaminant Travel Time in Layered Unsaturated Soils
PublicationThis study focused on the estimation of groundwater recharge rates and travel time of conservative contaminants between ground surface and aquifer. Numerical simulations of transient water flow and solute transport were performed using the SWAP computer program for 10 layered soil profiles, composed of materials ranging from gravel to clay. In particular, sensitivity of the results to the thickness and position of weakly permeable...
-
Use of a Least Squares with Conditional Equations Method in Positioning a Tramway Track in the Gdansk Agglomeration
PublicationSatellite measurement techniques have been used for many years in different types of human activity, including work related to staking out and making use of rail infrastructure. First and foremost, satellite techniques are applied to determine the tramway track course and to analyse the changes of its position during its operation. This paper proposes using the least squares with conditional equations method, known in geodesy (LSce)....
-
Sphere Drive and Control System for Haptic Interaction With Physical, Virtual, and Augmented Reality
PublicationA system for haptic interaction with physical, virtual, and augmented realities, founded on drive and measurement elements (DMEs), is considered. The system consists of eight DME rolls equipped with linear actuators, able to measure their angular velocity, drive the sphere, and adjust downforce (pressing the roll against the sphere). Two modeling issues are addressed. Special effort is put in to compensate for various technical...
-
Hyperbolic Asynchronous Method of a Radio Navigation Technique
PublicationHumans have always wanted to determine position in an unknown environment. At the beginning methods were simple. They were based on the observation of characteristic points, in the case of shipping additional observations of the coastline. Then came navigation based on astronomical methods (astronavigation). At the beginning of the XX-century a new way of determining the current location was developed. It has used radiowave signals....
-
The adaptive spatio-temporal clustering method in classifying direct labor costs for the manufacturing industry
PublicationEmployee productivity is critical to the profitability of not only the manufacturing industry. By capturing employee locations using recent advanced tracking devices, one can analyze and evaluate the time spent during a workday of each individual. However, over time, the quantity of the collected data becomes a burden, and decreases the capabilities of efficient classification of direct labor costs. However, the results obtained...
-
Reducing the Uncertainty of the Moving Object Location Measurement with the Method of Quasi-Multiple Measurement in GNSS Technology in Symmetrical Arrangement
PublicationThe article presents a solution to the problem of limited accuracy of dynamic measurements performed with GNSS receivers. The proposed measurement method is a response to the needs related to the assessment of the measurement uncertainty of the position of the track axis of the rail transport line. However, the problem of reducing the measurement uncertainty is universal for many different situations where high accuracy of positioning...
-
New bis(azobenzocrown)s with dodecylmethylmalonyl linkers as ionophores for sodium selective potentiometric sensors
PublicationNovel biscrowns 1 and 2 were synthesized from 13-membered azobenzocrown ethers containing bromoalkylenoxy chains in para position relative to the azo group. The synthesized diester molecules are dodecylmethylmalonic acid derivatives differing by the linker length. The synthesized compounds have the potential of being used as sodium ionophores in ion-selective electrodes. They were characterized and used as ionophores in classic...
-
A strategy for GPS data processing in a precise local network during high solar activity
PublicationThis paper presents the analyses connected with reduction of errors from ionospheric refraction using GPS data from local satellite networks. This is particularly essential during rising solar activity. The Bernese GPS Software v. 4.2 was used, as an analytical tool. The test data included measurements from a geodynamic network SUDETES situated in the Sudety Mountains across the border between the Czech Republic and Poland. A local...
-
Synchro-photogrammetry in the measurement of objects in motion - the case study
PublicationSynchronous photographs and digital photogrammetry methods in a measurement of objects in motion - the experiment. In the following paper, a case study example of a photogrammetric method based on synchronous digital photographs has been presented. This measurement method is an effective solution for tracking of moving objects, dynamic studies and dimensioning of geometry movements. Nowadays, the use of synchronous photography...
-
Multi-criteria Robot Selection Problem for an Automated Single-Sided Lapping System
PublicationFlat lapping is a crucial process in a number of precision manufacturing technologies. Its aim is to achieve extremely high flatness of the workpiece. Single-sided lapping machines have usually standard kinematic systems and are used in conjunction with conditioning rings, which are set properly be-tween the center and the periphery of the lapping plate. In this paper, instead of conventional single-side lapping machine, an automated...
-
Climate Change Impacts on Environmental and Human Exposure to Mercury in the Arctic
PublicationThis paper reviews information from the literature and the EU ArcRisk project to assess whether climate change results in an increase or decrease in exposure to mercury (Hg) in the Arctic, and if this in turn will impact the risks related to its harmful effects. It presents the state-of-the art of knowledge on atmospheric mercury emissions from anthropogenic sources worldwide, the long-range transport to the Arctic, and it discusses...
-
THE RESEARCH ON EGNOS SYSTEM IN CONTEXT OF THE ABILITY TO DETERMINE THE SHIP’S HULL SPATIAL ORIENTATION
PublicationThe European Geostationary Navigation Overlay Service (EGNOS) thanks to geostationary satellites covers an area of whole Europe, including Baltic and North Sea. It allows to fix the coordinates of object position with typical absolute accuracy of 1,5 m. Previous research have shown that relative accuracy is usually higher than absolute one [Nowak A., 2010, Nowak A., 2011], so probably it could be possible to use EGNOS to determine...
-
Economic significance of initial public offerings in China and India
PublicationRapid economic growth in China and India has attracted attention of many researchers, focusing on various social and economic factors underlying the success of these countries. One of the key components of country’s economy is financial system which consists of segments such as banking sector and equity market. The topic of initial public offerings (IPOs), one of the corporate financing sources, involving raising funds through...
-
Evaluation of the Possibility of Identifying a Complex Polygonal Tram Track Layout Using Multiple Satellite Measurements
PublicationWe present the main assumptions about the algorithmization of the analysis of measurement data recorded in mobile satellite measurements. The research team from the Gda´nsk University of Technology and the Maritime University in Gdynia, as part of a research project conducted in cooperation with PKP PLK (Polish Railway Infrastructure Manager), developed algorithms supporting the identification and assessment of track axis layout....
-
Postquarter-Point Case of Ship’s Side-Berthing and Its Influence on Marine Fender Pitch
PublicationThis paper presents a critical analysis of some selected codes and practical recommendations used as basic rules in the design procedures of modern marine fender systems. The first part of the discussion pertains to the existing equations used in calculating the eccentricity coefficient in the ship’s kinetic energy equation and the maximum allowable fender pitch (spacing) in a set of fenders installed along a quay wall. A new approach...
-
Wave Frequency Effects on Damage Imaging in Adhesive Joints Using Lamb Waves and RMS
PublicationStructural adhesive joints have numerous applications in many fields of industry. The gradual deterioration of adhesive material over time causes a possibility of unexpected failure and the need for non-destructive testing of existing joints. The Lamb wave propagation method is one of the most promising techniques for the damage identification of such connections. The aim of this study was experimental and numerical research on...
-
Evaluation of the Possibility of Identifying a Complex Polygonal Tram Track Layout Using Multiple Satellite Measurements
PublicationWe present the main assumptions about the algorithmization of the analysis of measurement data recorded in mobile satellite measurements. The research team from the Gda´nsk University of Technology and the Maritime University in Gdynia, as part of a research project conducted in cooperation with PKP PLK (Polish Railway Infrastructure Manager), developed algorithms supporting the identification and assessment of track axis layout....
-
System wykrywania i przeciwdziałania spoofingowi GPS
PublicationSpoofing w systemach nawigacji satelitarnej jest atakiem elektronicznym, który polega na nieuprawnionej emisji sygnałów stanowiących imitacje rzeczywistych sygnałów odbieranych z satelitów. Powoduje on wyznaczenie nieprawidłowych informacji o czasie, położeniu i prędkości odbiornika. Z uwagi na trudność jego wykrycia, spoofing stanowi poważniejsze zagrożenie niż proste zagłuszanie sygnałów zakłóceniem o dużej mocy (ang. jamming)....
-
Elastic scattering of electrons from chloroform
PublicationWe present experimental and theoretical cross sections for elastic electron scattering from CHCl3. This is an important target because of its relevance to environmental chemistry and the plasma etching industry as a source of chlorine radicals. The experimental results were obtained at incident electron energies ranging from 0.5 to 800 eV in the 10deg-130deg scattering angle range. Theoretically, the scattering cross sections in...
-
Rendezvous of heterogeneous mobile agents in edge-weighted networks
PublicationWe introduce a variant of the deterministic rendezvous problem for a pair of heterogeneous agents operating in an undirected graph, which differ in the time they require to traverse particular edges of the graph. Each agent knows the complete topology of the graph and the initial positions of both agents. The agent also knows its own traversal times for all of the edges of the graph, but is unaware of the corresponding traversal...
-
Rendezvous of Heterogeneous Mobile Agents in Edge-Weighted Networks
PublicationWe introduce a variant of the deterministic rendezvous problem for a pair of heterogeneous agents operating in an undirected graph, which differ in the time they require to traverse particular edges of the graph. Each agent knows the complete topology of the graph and the initial positions of both agents. The agent also knows its own traversal times for all of the edges of the graph, but is unaware of the corresponding traversal...
-
Reconstruction of 3D image of corona discharge streamer
PublicationIn this paper, the method of reconstruction of the 3D structure of streamers in DC positive corona discharge in nozzle-to-plate electrode configuration is presented. For reconstructing of 3D image of corona discharge streamer we propose a stereographical method, where streamers are observed from several directions simultaneously. The multi-directional observation enabled to obtain fine positional coordinates of streamers for a...
-
In vivo performance of intraperitoneal onlay mesh after ventral hernia repair
PublicationBackground: Ventral hernia repair needs to be improved since recurrence, postoperative pain and other complications are still reported in many patients. The behavior of implants in vivo is not sufficiently understood to design a surgical mesh mechanically compatible with the human abdominal wall. Methods: This analysis was based on radiological pictures of patients who underwent laparoscopic ventral hernia repair. The pictures...
-
Improving the Quality of Magnetic Signature Reproduction by Increasing Flexibility of Multi-Dipole Model Structure and Enriching Measurement Information
PublicationThe paper presents the construction of a multi-dipole model that allows reproducing magneticsignatures of ferromagnetic objects. The virtual object used in the paper is an ellipsoid, which is the sourceof synthetic data. To make the situation more realistic, noise is added to the synthetic data. Two significantimprovements compared to previous work are presented. Three-axial magnetometers are introduced insteadof uniaxial magnetometers....
-
The competitive advantage of Ppomorskie Voivodeship in strategic documents based on the Regional Innovation Strategy
PublicationThe article presents and discusses the main assumptions and courses of action contained in the innovation strategy for Pomorskie voivodeship with respect to building the competitive advantage The considerations are preceded by analyses concerning the interpretation and meaning of the following concepts in contemporary economy (with special emphasis on their regional context): competitiveness, competitive advantage and innovation,...
-
The competitive advantage of Pomorskie Voivodeship in strategic documents based on the Regional Innovation Strategy
PublicationThe article presents and discusses the main assumptions and courses of action contained in the innovation strategy for Pomorskie voivodeship with respect to building the competitive advantage The considerations are preceded by analyses concerning the interpretation and meaning of the following concepts in contemporary economy (with special emphasis on their regional context): competitiveness, competitive advantage and innovation,...
-
Bioaccumulation of metals in tissues of marine animals, Part II - metal concentrations in animal tissues
PublicationThe bioaccumulation of metals in an animal depends on a multitude of factors: biotic ones, like its body dimensions and mass, age, sex, diet, metabolism and position in the trophic web, as well as abiotic ones such as the distribution of metals in its environment, the salinity, temperature and pH of the water, habitat type, interactions with other metals. But it is diet that has the greatest influence on the accumulation of metals...
-
Using the Fingerprinting Method to Customize RTLS Based on the AoA Ranging Technique
PublicationReal-time Locating Systems (RTLSs) have the ability to precisely locate the position of things and people in real time. They are needed for security and emergency applications, but also for healthcare and home care appliances. The research aims for developing an analytical method to customize RTLSs, in order to improve localization performance in terms of precision. The proposed method is based on Angle of Arrival (AoA), a ranging...
-
Accuracy improvement of the prestressed concrete structures precise geometry assessment by use of bubble micro-sampling algorithm
PublicationPrestressed concrete structures are well-known technology for a vast period, but nevertheless, this very technology is a leading solution, currently used in construction industry. Prestressed concrete structures have a huge advantage over conventional methods because it uses the properties of concrete in a very efficient way. The main idea behind this technology is to introduce into the cross-section of the structure, the internal...
-
Analysis of Floodplain Inundation Using 2D Nonlinear Diffusive Wave Equation Solved with Splitting Technique
PublicationIn the paper a solution of two-dimensional (2D) nonlinear diffusive wave equation in a partially dry and wet domain is considered. The splitting technique which allows to reduce 2D problem into the sequence of one-dimensional (1D) problems is applied. The obtained 1D equations with regard to x and y are spatially discretized using the modified finite element method with the linear shape functions. The applied modification referring...
-
Experimental ORC micro-power plant for CHP application Part B: Radial and Multi-stage axial turbines
PublicationThe co-generative micro-power plant with the HFE7100 applied as a working medium was designed and built for experimental investigations. Special attention is paid to a micro-turbine which was built and tested in two variants: a radial turbine and an axial turbine. A concept of a radial turbine with 2 centripetal and 2 centrifugal stages is shown. This prototype was equipped with an aerostatic gas bearing and, alternatively, with...
-
Women's Entrepreneurship in Poland- Opportunities and Barriers According to Young Women Entering the Labour Market
PublicationWomen entrepreneurship is an important issue for both economic and social reasons. However cultural factors have an additional impact. In Poland women represent more than 50% of the population, nonetheless only 35% of people who run their own business are women. Main research questions in the current study were: What are the determinants of the above mentioned imparity? Do young women evaluate themselves as entrepreneurial? Do...
-
The shallow sea experiment with usage of linear hydrophone array
PublicationPurpose of this article is to present designed and made linear hydrophone array and the results obtained during in situ trails on Gulf of Gdańsk. The measuring system allowed to localize hydrophones in the selected points and perform measurements in both the horizontal antenna positioning and vertical. Made in this way recordings allow creating accurate 3D imaging of sound intensity/propagation. During research three floating objects...
-
Annealing Rate as a Crucial Parameter Controlling the Photoelectrochemical Properties of AuCu Mosaic Core–Shell Nanoparticles
PublicationThermal processing is an essential step during the synthesis of various metal nanostructures and for tailoring their morphology, optical, and electrochemical properties. Herein, a profound impact of the annealing rate and time on photoactivity of gold–copper nanostructures by changes in the position and alignment of energy levels and surface states is reported. AuCu nanoparticles (NPs) are fabricated by sputtering of thin metal...