Filters
total: 702
filtered: 576
Search results for: GNPS
-
Innovative method of localization airplanes in VCS (VCS-MLAT) distributed system
PublicationThe article presents the concept and the structure of the localization module. The prototype module is the part of the VCS (VCS-MLAT) localization distributed system. The device receives the audio signal transmitted in airplanes band (118 MHz – 136 MHz). Received data with the timestamps are send to the main server. The data from multiple devices estimates the localization of the airplane. The main aim of the project is the analysis...
-
Preparation of methanation catalysts for high temperature SOEC by β-cyclodextrin-assisted impregnation of nano-CeO2 with transition metal oxides
PublicationThe aim of this work was to prepare and examine the catalytic activity of nanometric CeO2 decorated with transition metal oxides – Ni, Co, Cu, Fe and Mn – towards a high-temperature methanation process under SOEC CO2/H2O simulated co-electrolysis conditions. Samples were prepared using the wet impregnation method via the conventional process and with the addition of native cyclodextrin. The influence of β-cyclodextrin (βCD) onto...
-
Ground-based, Hyperbolic Radiolocation System with Spread Spectrum Signal - AEGIR
PublicationThe most popular radiolocation systems in the world (at present), is the American GPS (Global Positioning System). It is managed by the Department of Defense and there is always the possibility of the occasional inaccuracies or deliberate introduction of errors that prevent its use by the special services or armies of other countries than the U.S.A. This situation has spawned the need to develop an autonomous, ground-based radiolocation...
-
Możliwości wykorzystania sieci ASG-EUPOS do walidacji okrętowych urządzeń nawigacyjnych
PublicationW artykule przedstawiono wyniki analiz możliwości wykorzystania serwisów czasu rzeczywistego sieci ASG-EUPOS do walidacji wybranych urządzeń nawigacyjnych. Rozważania teoretyczne uzupełniono pomiarami wykonanymi na jednostce pływającej, manewrującej na Zatoce Gdańskiej. Rejestrowano wskazania odbiorników pracujących w sieci ASG-EUPOS oraz odbiorników systemu GPS wykorzystujących korekty różnicowe. Zaprezentowano wyniki przeprowadzonych...
-
Określanie przebiegu trasy kolejowej na drodze pomiarów satelitarnych
PublicationW pracy przedstawiono, w sposób poglądowy, opis sieci ASG-EUPOS oraz architekturę zastosowanego zestawu pomiarowego GNSS. Opisano geodezyjne przygotowanie pomiarów toru kolejowego, które przeprowadzono na odcinku testowym. Ustawienie centrów fazowych anten względem osi toru testowego wyznaczono metodami geodezji tradycyjnej w oparciu o pomiary tachimetryczne. Na podstawie przeprowadzonych pomiarów na ok. 30-kilumetrowym odcinku...
-
Accuracy of marine gravimetric measurements in terms of geodetic coordinates of land reference benchmark
PublicationThe article presents how the values of (3D) coordinates of land reference points affect the results of gravimetric measurements made from the ship in sea areas. These measurements are the basis for 3D maritime inertial navigation, improving ships' operational safety. The campaign verifying the network absolute point coordinates used as a reference point for relative marine gravity measurements was described. The obtained values...
-
The accuracy assessment of determining the axis of railway track basing on the satellite surveying
PublicationW 2009 roku na Politechnice Gdańskiej rozpoczęto badania nad wykorzystaniem serwisu pomiarów fazowych NAVGEO aktywnej sieci geodezyjnej ASG-EUPOS dla przeprowadzania ciągłych pomiarów przebiegu trasu kolejowej. Celem kontynuowanych badań jest próba oceny możliwości zastosowania pomiarów fazowych GNSS, realizowanych przez kilka odbiorników, dla projektowania oraz inwentaryzacji toru kolejowego. Do oceny dokładności określenia osi...
-
Ocena dokładności określania osi toru kolejowego na drodze pomiarów satelitarnych
PublicationW 2009 roku na Politechnice Gdańskiej rozpoczęto badania nad wykorzystaniem serwisu pomiarów fazowych NAVGEO aktywnej sieci geodezyjnej ASG-EUPOS dla przeprowadzania ciągłych pomiarów przebiegu trasu kolejowej. Celem kontynuowanych badań jest próba oceny możliwości zastosowania pomiarów fazowych GNSS, realizowanych przez kilka odbiorników, dla projektowania oraz inwentaryzacji toru kolejowego. Do oceny dokładności określenia osi...
-
The Use of Gravimetric Measurements to Determine the Orthometric Height of the Benchmark in the Port of Gdynia
PublicationThis paper contains a description of the technology used to make gravimetric measurements of the height of a reference point located in the Port of Gdynia, Poland. Measurements were made using a CG-5 gravimeter manufactured by LaCoste & Romberg Scintrex Inc., and determinations of position used a Leica Viva GS15 receiver integrated with a network of HxGN SmartNet GNSS reference stations. The measuring methodology required gravimeter...
-
Finite Element Approaches to Model Electromechanical, Periodic Beams
PublicationPeriodic structures have some interesting properties, of which the most evident is the presence of band gaps in their frequency spectra. Nowadays, modern technology allows to design dedicated structures of specific features. From the literature arises that it is possible to construct active periodic structures of desired dynamic properties. It can be considered that this may extend the scope of application of such structures. Therefore,...
-
Asynchronous WAM with Irregular Pulse Repetition
PublicationRadiolocation systems for aviation based on Multi-Lateration (MLAT) typically use a set of synchronised ground sensors to receive radio signals broadcast by onboard transmitters. In most cases, the sensor synchronisation in Wide Area Multi-Lateration Systems (WAM) is provided by Global Navigation Satellite System (GNSS) receivers. However, in the case of synchronisation failure, there is still a possibility to estimate the coordinates...
-
Modified Preisach model of hysteresis in multi air gap ferrite core medium frequency transformer
PublicationThis article presents the modified Preisach model of hysteresis for a 3-phase medium frequency transformer in a 100 kW dual active bridge converter. The transformer magnetic core is assembled out of ferrite I-cores, which results in multiple parasitic air gaps. For this transformer, the hysteresis loops were measured and parameters of the Preisach model were determined. The Preisach distribution function is approximated with a...
-
Investigating Analytics Dashboards’ Support for the Value-based Healthcare Delivery Model
PublicationImproving the value of care is one of the essential aspects of Value-Based Healthcare (VBHC) model today. VBHC is a new HC delivery model which is centered on patient health outcomes and improvements. There is anecdotal evidence that the use of decision aid tools like dashboards can play a significant role in the successful implementation of VBHC models. However, there has been little or no systematic studies and reviews to establish...
-
The Accuracy of a Marine Satellite Compass under Terrestrial Urban Conditions
PublicationWhen used at sea, satellite compasses are capable of determining the course of a sailing vessel with high accuracy. It is dicult to verify the accuracy declared by the device manufacturer under such conditions, as it is dicult to define a reliable reference. This study analyses the accuracy of the satellite compass in an urban setting, with the satellite signal being obscured to various extents. It is an important point in the...
-
Accuracy assessment of mobile satellite measurements in relation to the geometrical layout of rail tracks
PublicationThe paper presents the campaigns of mobile satellite measurements, carried out in 2009–2015 on the railway and tram lines. The accuracy of the measurement method has been analysed on the basis of the results obtained in both horizontal and vertical planes. The track axis deviation from the defined geometric shape has been analysed in the areas clearly defined in terms of geometry, i.e. on the straight sections and sections with...
-
Modelling and analysis of medium frequency transformers for power converters
PublicationThe evolutions in power systems and electric vehicles, related to the economic opportunities and the environmental issues, bring the need of high power galvanically isolated DC-DC converter. The medium frequency transformer (MFT) is one of its key components, enabled by the increasing switching frequency of modern power semiconductors like silicon carbide transistors or diodes. The increased operating frequency offers small...
-
Graphene hydrogels with embedded metal nanopatricles as efficient catalysts in 4-nitrophenol reduction and methylene blue decolorization
PublicationSynthesis and characterization of the graphene hydrogels with three different metallic nanoparticles, that is Au, Ag and Cu, respectively is presented. Synthesized in a one-pot approach graphene hydrogels with embedded metallic nanoparticles were tested as heterogeneous catalysts in a model reaction of 4-nitrophenol reduction. The highest activity was obtained for graphene hydrogel with Cu NPs and additional reaction of methylene...
-
Rheological, Mechanical, Microstructural and Radiation Shielding Properties of Cement Pastes Containing Magnetite (Fe3O4) Nanoparticles
PublicationThis work examines the influence of iron oxide nanoparticles (Fe3O4 NPs) on neutron and gamma-ray radiation shielding characteristics of Portland cement paste. Experimental evaluations were supplemented with theoretical studies using NXCom program. Portland cement pastes with 5, 10, 15, 20, and 30 wt% of nanomagnetite cement replacement were produced. Moreover, rheological, early strength development, compressive strength, and...
-
Photocatalytically Active TiO2/Ag2O Nanotube Arrays Interlaced with Silver Nanoparticles Obtained from the One-Step Anodic Oxidation of Ti–Ag Alloys
PublicationThe development of a photocatalyst with remarkable activity to degrade pollutants in aqueous and gas phase requires visible lightresponsive stable materials, easily organized in the form of a thin layer (to exclude the highly expensive separation step). In this work, we present a one-step strategy for synthesizing material in the form of a self-organized TiO2/Ag2O nanotube (NT) array interlaced with silver nanoparticles (as in a...
-
The effect of Ag, Au, Pt, and Pd on the surface properties, photocatalytic activity and toxicity of multicomponent TiO2-based nanomaterials
PublicationMulticomponent TiO2-based nanomaterials (MC-NMs) show better physicochemical properties than their individual components or bulk materials. However, the same unique properties that offer innovative applications might also pose unknown risks to human health and the environment. In this context, TiO2- based nanomaterials with a mixture of noble metal precursors (Ag, Au, Pt, and Pd) for large-scale technological applications in air...
-
Automatic Identification System (AIS) Dynamic Data Integrity Monitoring and Trajectory Tracking Based on the Simultaneous Localization and Mapping (SLAM) Process Model
PublicationTo enhance the safety of marine navigation, one needs to consider the involvement of the automatic identification system (AIS), an existing system designed for ship-to-ship and shipto- shore communication. Previous research on the quality of AIS parameters revealed problems that the system experiences with sensor data exchange. In coastal areas, littoral AIS does not meet the expectations of operational continuity and system availability,...
-
Lessons learned in a decade: Medical‐toxicological view of tattooing
PublicationTattooing has been part of the human culture for thousands of years, yet only in the past decades has it entered the mainstream of the society. With the rise in popularity, tattoos also gained attention among researchers, with the aim to better understand the health risks posed by their application. 'A medical-toxicological view of tattooing'-a work published in The Lancet almost a decade ago, resulted from the international collaboration...
-
Global Digital Technology Convergence: Driving Diffusion via Network Effects
PublicationSince the 1970s, we have witnessed unprecedented diffusion of digital technologies in both speed and geographic coverage. These technologies are pervasive and disruptive, and lead to profound shifts and transformations in societies and economies. Many claim that emerging network externalities are the principal phenomenon driving the process of technology diffusion and determining its in-time dynamics. This book analyses the unique...
-
Dis/Trust and data-driven technologies
PublicationThis concept paper contextualises, defines, and systematises the concepts of trust and distrust (and their interrelations), providing a critical review of existing literature so as to identify gaps, disjuncture, and continuities in the use of these concepts across the social sciences and in the context of the consolidation of the digital society. Firstly, the development of the concept of trust is explored by looking at its use...
-
Triangular 3D Laser Scanning in Underwater Photogrammetry
PublicationThe use of triangular 3D laser scanning may significantly enhance the visual inspection of underwater objects. In these days of high demand for accurate information, exclusively photographic documentation is not enough, as it is geometrically flawed. The authors of this article are trying to present the rudiments of laser scanning, a modern means of measuring, which is reliable, relatively easy to use and works in accordance with...
-
EVALUATION OF THE SEMIVARIOGRAM SELECTION ON THE KRIGING INTERPOLATION
PublicationThe aim of the paper is to present the possibilities of geostatistical interpolation kriging method using in the process of generating digital terrain models (DTM). The source of data is a direct measurements realized with a precision GNSS positioning kinematic measurement technique RTN. Kriging algorithm was analysed, especially in the meaning of a semivariogram every step. Theoretical semivariogram selection influence on the...
-
Skilled-Unskilled Wage Gap Versus Evolving Trade And Labour Market Structures in the EU
PublicationThis paper proposes an alternative approach to the empirical study of wage gap between workers with different educational levels in the enlarged EU. The analysis is based on sectoral database, linking labor market statistics and trade data at the level of 12 manufacturing sectors in a group of 20 European countries: selected New Member States (NMS-5) and former EU-15 economies, in the period 1995-2005. The results of the empirical...
-
Airborne Laser Scanning Point Cloud Update by Used of the Terrestrial Laser Scanning and the Low-Level Aerial Photogrammetry
PublicationLaser scanning technology is a spatial information gathering technique which is commonly used all over the world. Systems where the red-light beam are used, are divided into: terrestrial, mobile and airborne scanning systems. The main differences between those are the accuracy, the data acquisition solution (f. e. in ALS and MLS besides of the laser scanner, the inertial navigation system is required) and the covered area in one...
-
Spatial pattern of ASG-EUPOS sites
PublicationThe article presents the spatial pattern analysis of the ASG-EUPOS permanent GNSS stations in Poland. Using different methods and tools (nearest neighbour, Riplay’s K-function, morphology of Thiessen polygons) we proved that the station distribution model changes within scales. At short distances up to 65 km, which are typical lengths in the network, stations are irregularly dispersed. Increasing this distance to 130 km and over...
-
Evaluation of the reference fuel consumption and CO2 emission of vehicle with using of the map of operating conditions for selected agglomeration
PublicationZaproponowana w pracy metoda tworzenia mapy warunków eksploatacji dla wybranej aglomeracji może zostać przeprowadzona przy wykorzystaniu tanich i prostych w obsłudze urządzeń. Podstawowym urządzeniem badawczym jest pojazd samochodowy wyposażony w system pomiaru położenia GPS z układem korekty wskazań wysokości i rejestracji parametrów jazdy. Zamieszczony w pracy przykład wykorzystania mapy warunków eksploatacji pokazuje możliwości...
-
Do inspekcji linii wysokiego napięcia - bezzałogowe pojazdy latające
PublicationPraca przedstawia możliwości zastosowania bezzałogowych pojazdów latających w przemyśle energetycznym. Opisano możliwości i rodzaje bezzałogowych pojazdów latających. Skupiono się na zastosowaniu tych pojazdów w różnych obszarach obsługi linii wysokiego napięcia. Następnie prezentuje się model latającego mini-robota, który zbudowany jest na bazie modelu śmigłowca SST Eagle 2GS firmy Hirobo uzupełnionego odpowiednio w celu umożliwienia...
-
Liquid crystal display unit for reconfigurable instrument for automotive applications
PublicationRozwój elektronicznych systemów w samochodach (radio, nawigacja, monitorowanie stanu pojazdu, telefon, GPS, itd.) stwarza potrzebę opracowania uniwersalnych i wysoko sprawnych systemów wizualizacji informacji dla kierowcy i pasażerów samochodu. Prezentacja informacji powinna następować z minimalnym zakłóceniem uwagi kierowcy i hierarchiczną klasyfikacją jej priorytetów. Poszukiwanie optymalnych rozwiązań systemów wizualizacji informacji...
-
Synthesis and Characterization of Monometallic (Ag, Cu) and Bimetallic Ag-Cu Particles for Antibacterial and Antifungal Applications
PublicationIn this paper, the experimental studies are concerned with the effect of the synthesis parameters on the formation of monometallic Ag and Cu nanoparticles (NPs). We consider the synthesis strategies verification for the bimetallic core-shell and alloy particles preparation. It was successfully obtained by chemical reduction method. The obtained colloidal solution is characterized by the transmission electron microscopy (TEM) with...
-
Automatic Analysis of Trajectories of Moving Objects
PublicationOngoing monitoring is essential to providing security and safety of maritime and air operations. This paper presents the research in the area of automatic analysis of movement of unrestricted vehicles like ships and air-planes. The analysis is aimed at extraction of trajectory information, and the results can be used to identify anomalous behaviour in archived and real-time data. In this paper we focus on data acquired using the...
-
Przyczepa do pomiaru oporu toczenia opon i nawierzchni drogowych - wybrane zagadnienia
PublicationW artykule przedstawiono zasadę pomiaru współczynnika oporu toczenia opon i nawierzchni drogowych przy wykorzystaniu przyczepy R2 Mk2, skonstruowanej i wykonanej na Politechnice Gdańskiej. Pokazano przykładowe przebiegi dla uzyskanego współczynnika oporu toczenia oraz możliwość tworzenia trajektorii w Google Maps przy wykorzystaniu współrzędnych geograficznych z modułu GPS. W dalszej części omówiono pomiar średniej głębokości profilu...
-
Radar data fusion in the STRADAR system
PublicationThe main task of the Polish Border Guard is protection of the country’s border which requires utilization of multimedia surveillance systems automatically gathering, processing and sharing various data. The paper presents such a system developed for the Maritime Division of the Polish Border Guard within the STRADAR project and the problem of fusion of radar data in this system. The system, apart from providing communication means,...
-
Multimedialny system nadzoru dla straży granicznej – projekt STRADAR
PublicationSTRADAR jest systemem nadzoru przeznaczonym do wspierania działań operacyjnych morskiej straży granicznej, umożliwiającym zbieranie, przetwarzanie i udostępnianie informacji i danych pochodzących z takich sensorów, jak radary, kamery wideo, AIS, GPS, aparaty fotograficzne oraz z połączeń audio, wiadomości SMS, plików i notatek. Informacje te mogą być udostępniane na bieżąco oraz archiwalnie z synchronizacją zdarzeń lub bez synchronizacji....
-
S09-4 The development of the Physical Activity Environment Policy Index (PA-EPI): a tool for monitoring and benchmarking government policies and actions to improve physical activity
PublicationBackground Insufficient physical activity (PA) is a global issue for health. A multifaceted response, including government action, is essential to improve population levels of PA. The purpose of this study was to develop the ‘Physical Activity Environment Policy Index’ (PA-EPI) monitoring framework to assess government policies and actions for creating a healthy PA environment. Methods An iterative process was undertaken. This...
-
Exsolution of Ni nanoparticles on the surface of cerium and nickel co-doped lanthanum strontium titanate as a new anodic layer for DIR-SOFC. Anti-coking potential and H2S poisoning resistance of the prepared material
PublicationThe aim of this study was to evaluate a new catalytic material for biogas fueled DIR-SOFC. This material was a perovskite-type SrTiO3 doped with La, Ce and Ni of a general formula La0.27Sr0.54Ce0.09Ni0.1Ti0.9O3-σ (LSCNT). Additional preparation steps were undertaken to promote a nickel exsolution process. Heat post-treatment of powders in a humidified H2 resulted in an intensive growth of nickel nanoparticles (NPs) while the temperature...
-
Development and validation of a GC–MS/MS method for the determination of 11 amphetamines and 34 synthetic cathinones in whole blood
PublicationPurpose Psychoactive compounds that contain a phenylethylamine structure (such as amphetamine-type stimulants and synthetic cathinones) are one of the major classes of stimulants on the recreational drug market. Approximately 670 new psychoactive substances (NPS) are monitored only in Europe; however, new psychoactive compounds are being developed for illicit trade each year. In this context, the development of new analytical procedures...
-
Planetary roller extruders in the sustainable development of polymer blends and composites – Past, present and future
PublicationScrew extruders as continuous flow reactors allow the synthesis of new polymers, preparation of polymer blends and composites, and modification or functionalization of commercially available polymers. Literature data shows that the twin screw extrusion is the most popular solution used for this purpose. In contrast, the number of scientific papers on alternative methods, such as multi-screw extruders, is somewhat limited. This...
-
Zastosowanie mobilnych pomiarów satelitarnych do określania położenia wysokościowego torów
PublicationW pracy podjęto próbę sprawdzenia, na jaką dokładność można było liczyć na kolejnych etapach rozwoju techniki mobilnych pomiarów satelitarnych w zakresie określania położenia wysokościowego torów. Do tego celu wykorzystano wyniki kampanii pomiarów satelitarnych przeprowadzonych na przestrzeni 2009-2015. W wyniku przeprowadzenia odpowiedniej procedury obliczeniowej wykazano, że w okresie tym dokładność pomiarów satelitarnych wyraźnie...
-
Horizontal velocity field derived from EPN and ASG-EUPOS satellite data on the example of south-western part of Poland
PublicationPresently the determination of the velocity field in the global reference frame is possible by using different space techniques and dense terrestrial networks from global to local and regional scales. However, the reliability of such determinations is strongly limited by the restricted number of unmodeled effects. Some of them are periodic (atmospheric or hydrological effects), some instantaneous (natural or man-made seismicity)...
-
Lighting education for architects, the barriers and challenges: a survey of architecture students
PublicationCreating a well-lit environment requires the understanding of daylight and electric lighting design principles within the built environment. Recent years have brought a large number of new lighting assessment and design methods. The discovery of new photoreceptor cells in the eye - photosensitive retinal ganglion cells - forced lighting researchers to focus on parametrisation for the image forming (IF) and non-image forming (NIF)...
-
Where Did Knowledge Management Go?: A Comprehensive Survey
PublicationKnowledge Management (KM) research outputs have been expanding exponentially in the past years, generating diversified topics, which lack integration and classification. It has been challenging for experts to classify KM because of its versatile open fields, and in our view, it contributes to the technocratic approach remaining behind the organizational approach. This paper highlights a way to classify KM publications through a...
-
Study of ZrS3-based field-effect transistors toward the understanding of the mechanisms of light-enhanced gas sensing by transition metal trichalcogenides
PublicationExtending knowledge of the properties of low-dimensional van der Waals materials, including their reactivity to the ambiance, is important for developing innovative electronic and optoelectronic devices. Transition metal trichalcogenides with tunable optical band gaps and anisotropic conductivity are an emerging class among low- dimensional structures with the possibility of gate tunability and photoreactivity. These properties...
-
Light Symposium. Connecting health research with lighting practice
PublicationThanks to state-of-the-art medical and environmental research, our current understanding about the impact of light and lighting is improving at a rapid rate. While the evolution of lighting technologies offers promising design possibilities, it also poses new challenges to planners and the general public. This is further complicated by the fact that today’s modern indoor lifestyle means we can be completely disconnected from nature...
-
Voice Maps - portable, dedicated GIS for supporting street navigtion and self-dependent movement of the blind
PublicationThe concept and the prototype application of the system supporting the street navigation and independent, outdoor movement of the blind is presented. The system utilises the GIS database of geometric network of the pedestrian paths in the city and is capable of finding the route from the indicated source to destination. Subsequently, the system supports the movement of the blind along the found route. The information on the user's...
-
Road surface roughness estimation employing integrated position and acceleration sensor
PublicationAssessment of a surface quality being an essential task for the authorities supervising the roads provides the subject of the paper. Information about riding quality of a pavement, important for drivers, both in terms of their comfort and safety is collected during experiments employing mobile sensors. The paper describes the use of a miniature position and acceleration sensor for evaluation of the roughness of the road surface....
-
The influence of the geographic positioning system error on the quality of ship magnetic signature reproduction based on measurements in sea conditions
PublicationIn previous studies, the authors performed the magnetic signature reconstruction of the marine ship Zodiak as part of the measurement campaign focused on recording magnetic data and the relative position of a ship during its passage over a magnetometer immersed on the testing ground. A high degree of representation of the magnetic signature was obtained. However, the recorded measurement data revealed new patterns of the multidipole model...