Search results for: THERMAL PERFORMANCE
-
SELECTION OF DIAGNOSTIC FUNCTIONS IN A WHEELED TRACTOR
PublicationIn a classical approach to damage diagnosis, the technical condition of an analyzed machine is identified based on the measured symptoms, such as performance, thermal state or vibration parameters. In wheeled tractor the fundamental importance has monitoring and diagnostics during exploitation concerning technical inspection and fault element localizations. The main functions of a diagnostic system are: monitoring tractor components...
-
Experimental investigation on heat pipes supported by soy wax and lauric acid for electronics cooling
PublicationThis paper presents an experimental study of heat pipes for electronics cooling that were supported by energy storage materials (i.e. phase change materials - PCMs) coated at the adiabatic section. The PCMs utilized included two materials, namely lauric acid and soy wax, the latter being considered as a more cost-effective alternative. The study focused on three different powers: 20 W, 25 W, and 30 W. Both heating, cooling, and...
-
An Impact of Environmental Disturbances on Combined Cycle Power Plant Control
PublicationCombined cycle power plants operate at thermal efficiency approaching 60 percent. In the same time their performance presents several problems that have to be addressed. E.g. gas turbines are very sensitive to backpressure exerted on them by the heat recovery steam generators as well as to ambient pressure and temperature.
-
Inter-laboratory proficiency tests in measuring thermal insulation and evaporative resistance of clothing using the Newton-type thermal manikin
Publication -
Thermal analysis and experimental verification of permanent magnet synchronous motor by combining lumped-parameter thermal networks with analytical method
Publication -
Galerkin Finite Element Process for Entropy Production and Thermal Evaluation of Third-Grade Fluid Flow: A Thermal Case Study
Publication: A fluid’s moving class improves its heat transmission capability, as well as its rigidity, owing to multivariate molecule suspension. In this way, nanofluids are superior to common fluids. In this study, we evaluated the features of ease and heat transfer. Furthermore, we investigated permeable media, heat source, variable heat conductivity, and warm irradiation results. A mathematical technique known as the Galerkin finite element...
-
Mater-Bi/Brewers’ Spent Grain Biocomposites—Novel Approach to Plant-Based Waste Filler Treatment by Highly Efficient Thermomechanical and Chemical Methods
PublicationThermoplastic starch (TPS) is a homogenous material prepared from native starch and water or other plasticizers subjected to mixing at a temperature exceeding starch gelatinization temperature. It shows major drawbacks like high moisture sensitivity, poor mechanical properties, and thermal stability. To overcome these drawbacks without significant cost increase, TPS could be blended with bio-based or biodegradable polymers and...
-
Thermal lenses caused by any acoustic source.
PublicationNieliniowe straty energii fali akustycznej doprowadzają do powstania obszarów ogrzanych, to znaczy obszarów o innej prędkości fali akustycznej niż pozostała przestrzeń. Soczewki termiczne wywoływane przez propagację fal akustycznych okresowych i nieokresowych są rozpatrywane. Przedstawiono ilustrację obliczeń numerycznych.
-
Multilayer thermal model of healty and burned skin
PublicationW pracy przedstawiono spójny model cieplny skóry wraz z tkankami podskórnymi, na podstawie pomiarów "in vitro" na świni domowej. Model uwzględnia rozkład temperatury, przewodności cieplnej oraz efuzyjności i dyfuzyjności cieplnej w funkcji głębokości, zarówno dla skóry zdrowej jak i oparzonej.
-
The solvent-free thermal dehydration of hexitols on zeolites
PublicationPodczas termicznej dehydratacji heksytoli w obecności zeolitów otrzymano szereg produktów zachodzących zarówno z inwersją lub retencją konfiguracji przy asymetrycznych atomach węgla. Produkty rozdzielano i identyfikowano przy pomocy chromatografii i spektroskopii NMR. 1,4:3,6-dianhydroiditol scharakteryzowano przy pomocy rentgenowskiej analizy strukturalnej.
-
Thermal stability of the cobalt base clad layers
PublicationBadano wpływ długotrwałego oddziaływania temperatury na mikrostrukturę i własności mechaniczne warstw napawanych laserowo wykonanych ze stopów na bazie kobaltu zawierających chrom i wolfram. Stopy te są przewidywane do zastosoania na przylgnie zaworów wydechowych silników diesla.
-
Thermal properties of polyamide 6/polyurethane blends
Publication -
Style Transfer for Detecting Vehicles with Thermal Camera
PublicationIn this work we focus on nighttime vehicle detection for intelligent traffic monitoring from the thermal camera. To train a Convolutional Neural Network (CNN) detector we create a stylized version of COCO (Common Objects in Context) dataset using Style Transfer technique that imitates images obtained from thermal cameras. This new dataset is further used for fine-tuning of the model and as a result detection accuracy on images...
-
PVT - hybrid photovoltaic - thermal solar systems
PublicationPVT - to urządzenia, łączące ze sobą funkcje modułu fotowoltaicznego i kolektora słonecznego, w którym rolę absorbera pełni moduł ogniw fotowoltaicznych. Umożliwia to otrzymywanie z tej samej powierzchni pokrycia dachu lub fasady budynku uzyskiwanie jednocześnie energii elektrycznej i cieplnej. Uzyskiwane ciepło jest ciepłem niskotemperaturowym. Poszczególne rozwiązania systemów PVT można scharakteryzować ze względu na: różną liczbę...
-
The effect of sludge thermal disintegration on quality of effluents
PublicationDezintegracja osadów ściekowych prowadzona jest w celach intensyfikacji procesu fermentacji metanowej oraz poprawy odwadnialności osadów ściekowych. Przedstawiono zmiany jakości cieczy nadosadowej osadów ściekowych poddanych procesowi termicznej dezintegracji. Określono zmiany wartości chemicznego zapotrzebowania na tlen oraz stężenia azotu amonowego, białka, fosforanów oraz lotnych kwasów tłuszczowych.
-
Photoinduced and thermal oxidation of rapeseed and sunflower oils
PublicationCelem prezentowanych badań było porównanie stabilności oksydatywnej olejów rzepakowych i słonecznikowych. Na etapie przyspieszania utleniania zastosowano promieniowanie UV. Po naświetlaniu lotne produkty utlenienia były izolowane z fazy nadpowierzchniowej przy pomocy mikroekstrakcji do fazy stacjonarnej HS-SPME(włókno DVB/CAR/PDMS) i oznaczane z zastosowaniem chromatografii gazowej z detektorem płomieniowo-jonizacyjnym (GC/FID)....
-
Impact of the medical clothing on the thermal stress of surgeons
Publication -
Thermal and calorimetric investigations of titania–silica composites
Publication -
Intelligent thermal imaging camera with network interface
Publication -
Thermal analysis of bis(tetraethylammonium) tetrachloroferrate(II)
PublicationBadano dekompozycję termiczną związków bis(tetraethylammonium) tetrachloroferrate(II). Stosowano następujące metody badawcze: TG-FTIR, TG-MS i DTA. Pomiary przeprowadzono w atmosferze obojętnej w zakresie temperatur od 293 K do 1073 K. Stałe produkty dekompozycji identyfikowano metodą spektroskopii w podczerwieni, spektroskopii Mössbauera oraz metodą dyfrakcji promieniowania rentgenowskiego. Przedyskutowano wpływ stopnia utlenienia...
-
Magneto-thermal convection of low concentration nanofluids
PublicationThe main aim of this paper was to analyze possible utilization of the low concentration nanofluids and the magnetic field to enhance heat transfer. The studied fluids were based on water with an addition of copper particles (40-60 nm diameter). They belonged to the diamagnetic group of materials. As a first attempt to stated target the analysis of enclosure placed in the maximal value of square magnetic induction gradient was carried...
-
Thermal ablation modeling via bioheat equation
PublicationWe consider Pennes’ bioheat equation and discuss an implicit numerical scheme which has better stability properties than other approaches. Our discussion concerns Carthesian geometry problems, however it carries over to spherical geometry models and more complicated shapes.
-
Protein thermal stabilization in aqueous solutions of osmolytes
PublicationProteins’ thermal stabilization is a significant problem in various biomedical, biotechnological, and technological applications. We investigated thermal stability of hen egg white lysozyme in aqueous solutions of the following stabilizing osmolytes: Glycine (GLY), N-methylglycine (NMG), N,N-dimethylglycine (DMG), N,N,N-trimethylglycine (TMG), and trimethyl-N-oxide (TMAO). Results of CD-UV spectroscopic investigation were compared...
-
Thermal-Humidity Parameters of 3D Printed Wall
Publication -
Style Transfer for Detecting Vehicles with Thermal Camera
Publication -
Thermal stability of expanded perlite modified by mullite
Publication -
Thermal decomposition of acrylic pressure-sensitive adhesives
Publication -
Mask Detection and Classification in Thermal Face Images
PublicationFace masks are recommended to reduce the transmission of many viruses, especially SARS-CoV-2. Therefore, the automatic detection of whether there is a mask on the face, what type of mask is worn, and how it is worn is an important research topic. In this work, the use of thermal imaging was considered to analyze the possibility of detecting (localizing) a mask on the face, as well as to check whether it is possible to classify...
-
Pedestrian detection in low-resolution thermal images
PublicationOver one million people die in car accidents worldwide each year. A solution that will be able to reduce situations in which pedestrian safety is at risk has been sought for a long time. One of the techniques for detecting pedestrians on the road is the use of artificial intelligence in connection with thermal imaging. The purpose of this work was to design a system to assist the safety of people and car intelligence with the use...
-
Performance properties of rigid polyurethane-polyisocyanurate/brewers’ spent grain foamed composites as function of isocyanate index
PublicationIn the presented work, rigid polyurethane-polyisocyanurate (PUR-PIR) foams filled with brewers’ spent grain (BSG) were prepared. The influence of the isocyanate index (II) on its performance was investigated. Foams obtained with higher isocyanate index required a higher amount of hydrofluorocarbon physical blowing agent to provide the same apparent density of material. An increase of isocyanate index resulted in a slight decrease...
-
Comparative Analysis of the Cofee and Cocoa Industry By‑Products on the Performance of Polyethylene‑Based Composites
PublicationThe application of plant-based by-products from the food industry as minimally processed functional fillers for polymeric composites is an increasingly popular trend among researchers and manufacturers. While minimizing the preprocessing of lignocellulosic fillers leads to an increase in the sustainability of the overall composite and a decrease of the carbon footprint, filler modification is usually indispensable to obtaining...
-
Thermal decomposition of surface compounds for the generation of small quantities of acetaldehyde. Calibration of a thermal desorption gas chromatography flame ionization detection.
PublicationW pracy opisano sposób wytwarzania niewielkich ilości acetaldehydu w procesie termicznego rozkładu związku powierzchniowego uzyskanego w wyniku chemicznej modyfikacji żelu krzemionkowego.Proces rozkładu prowadzony jest w temperaturze 130-190 stopni Celsjusza.Przedstawiono również sposób syntezy prowadzący do uzyskania odpowiedniego związku powierzchniowego.
-
Performance and emission characteristics of diesel engines running on gaseous fuels in dual-fuel mode
PublicationConventional fossil fuels are being substituted with alternative green fuels because of their greenhouse gas emissions and pollution problems, which pose a severe threat to the environment. Several studies have reported the usage of biodiesel and gaseous fuels in both single and dual-fuel modes. Gaseous fuels such as producer gas, biogas, syngas, and hydrogen produced from renewable biomass could potentially be used along with...
-
Fire-induced spalling of ultra-high performance concrete: A systematic critical review
PublicationUltra-high performance concrete (UHPC) is a novel concrete class characterized by a compressive strength of more than 150 MPa. One of the most significant drawbacks of employing UHPC is that is very low permeability owing to its great compactness of dense structure increases the risk of fire-induced spalling. It is challenging for fire safety and structural engineers to predict and analyze this issue due to the lack of widely accepted...
-
Nanocrystalline cathode functional layer for SOFC
PublicationRecently, it was shown that thin functional layers introduced between an electrolyte and cathode might improve cathode performance. However, the mechanism of this improvement still needs analysis. In this paper, a thin (∼140 nm), spin-coated perovskite layer (La0.6Sr0.4Co0.2Fe0.8O3-δ) was placed between a cathode (La0.6Sr0.4Co0.2Fe0.8O3-δ) and an electrolyte (Ce0.8Gd0.2O2-δ) and the effects of this investigated. The microstructure...
-
Enhanced interfacial and mechanical performance of styrene-butadiene rubber/silica composites compatibilized by soybean oil derived silanized plasticization
PublicationSilanized plasticizer (SP) was chemically derived and synthesized from soybean oil (SBO) co-vulcanized with bis-(3-(triethoxysilyl)-propyl) tetrasulfide (TESPT) by using the sulfur-accelerated curing system. SP extended styrene-butadiene rubber (SBR)/silica composites have been studied for their improved filler dispersion through coupling interaction at the SBR/silica interface. The effect of SP on cross-link density, thermal,...
-
Evaluation of thermal diffusivity variations in multi - layered structures.
Publication.
-
Formulation of the inverse problem in thermal tomography for burn diagnostics.
PublicationZdefiniowano zagadnienie odwrotne w analizie przepływów ciepła w strukturach biologicznych, którego rozwiązanie jest niezbędne w tomografii termicznej. Celem jest rekonstrukcja rozkładu właściwości cieplnych w strukturze geometrycznej badanych obiektów. Wektor decyzyjny może być zdefiniowany na podstawie wiedzy o badanym obiekcie. Można wybrać liczbę nieznanych parametrów modelu termicznego tego obiektu. Dla małej liczby niezbędna...
-
Accelerated ageing of organic coating systems by thermal treatment
Publication -
Thermal properties of poly(vinyl chloride)/polyurethane blends
Publication -
Thermal heat-balance mode flow-to-frequency converter
Publication -
Induction heating in estimation of thermal properties of conductive materials
Publication -
ARRAY OF MINIJETS – THERMAL AND HYDRAULIC PHENOMENA IN BOUNDARY LAYER
PublicationPresented work considers flow and thermal phenomena occurring in the system consisting of minijets array and heated with constant heat flux surface. Numerical analyses, based on the mass, momentum and energy conservation laws, were conducted. Focus was placed on the proper model construction, in which turbulence and boundary layer modelling was crucial. Calculations were done for various mass flow rates. The main calculations were...
-
Influence of the thermal modernization of window on transmission heat losses
PublicationThe article presents the results of calculations of the heat transfer coefficient for the state before and after renovation for the historic windows. The aim of the analysis was to obtain the values of thermal insulation parameters demanded by the regulations, while not losing the historical value of the window. The described example of the renovation of the existing window consisted in installing an additional window panel from...
-
Diagnostics of thermal processes in antenna systems of broadcast stations
PublicationDiagnostics is an important element associated with the operation of a radio antenna systems, allowing earlier detection of potential damage. Thermography is one of the diagnostic tools, which allows for non-invasive assessment of technical condition. It brings together both financial savings associated with the removal of the damage and the potential effects caused by it. The article presents an example of using a thermal imaging...
-
Thermal Analysis Of Hybrid Microchannel-Microjet Heat Exchanger
PublicationThe paper presents the numerical investigation of a microjet- microchannel cooling module. In which microjets of water are impinging into the microchannels and forming a liquid film on the impingement surface. Applied technology takes benefits from two very attractive heat removal techniques. When laminar jets are impinging on the surface have a very high kinetic energy at the stagnation point, also in microchannels boundary layer...
-
An advanced Thermal-FSI approach to flow heating/cooling
PublicationActually, two-way thermal-energy exchange between working fluid and solid material of a casing is a leading problem for modern – semi automatic – design techniques. Many questions should be solved, especially, the turbulent mode of thermal energy transport both in fluid and solid, should be re-examined and reformulated from the primary principles. In the present paper, a group of researchers from Energy Conversion Department of...
-
Thermal properties of tetrabutylammonium bromotrichloro-, tribromochloro-and tetrabromoferrates(III)
PublicationW pracy badana jest termiczna dekompozycja związków tetrabutylammonium bromotrichloro-, tribromochloro-and tetrabromoferrates(III). Analizę termiczną (TG-MS, DTA, DTG i DSC) prowadzono w atmosferze argonu w zakresie temperatur 293-1073 K. Stałe produkty dekompozycji identyfikowano metodą dyfrakcji promieniowania rentgenowskiego.
-
On thermal stability of topological qubit in Kitaev's 4D model
PublicationWe analyse stability of the four-dimensional Kitaev model-a candidate for scalable quantum memory - in finite temperature within the weak coupling Markovian limit. It is shown that, below a critical temperature, certain topological qubit observables X and Z possess relaxation times exponentially long in the size of the system. Their construction involves polynomial in system size algorithm which uses as an input the results of...
-
Fourier based stabilization of thermal images in dynamic thermography
Publication -
The influence of glycols on thermal stability and chemical structure of glycolysates
PublicationW pracy omówiono wpływ glikoli (etano-1,2-diolu - heksano-1,6-diolu) na właściwości termiczne oraz budowę chemiczną glikolizatów. Analizy przeprowadzono dla półproduktów wytworzonych w jednym stosunku masowym odpadowego poliuretanu do glikolu wynoszącego 10:1.
-
Thermal Sensations of Surgeons During Work in Surgical Gowns
Publication -
Influence of preparation conditions on thermal properties of lanthanide benzenepolycarboxylates
Publication -
Silicone pressure-sensitive adhesives with increased thermal resistance
Publication -
Negative thermal expansion and antiferromagnetism in the actinide oxypnictide NpFeAsO
Publication -
Comparison of calculated and measured thermal stresses in asphalt concrete
PublicationThe paper presents the comparison of calculated and measured thermal stresses induced in restrained asphalt concrete specimens by cooling. Thermal stresses were measured in the Thermal Stress Restrained Specimen Test. The calculations of thermal stresses were performed with the use of a theoretical formula based on the temperature dependent stiffness modulus. The novel approach applied in this paper was that the stiffness modulus...
-
Negative thermal expansion and antiferromagnetism in the actinide oxypnictide NpFeAsO
PublicationPrzeprowadzona został udana synteza NpFeAsO, związku będącego analogiem do LaFeAsO. Stwierdzono występowanie antyferromagnetycznego uporządkowania z T_N = 57 K. Poniżej T_N zauważono tzw. ujemną rozszerzalność termiczną. Przeprowadzono badania dyfrakcyjne przy użyciu promieniowania synchrotronowego (ESRF - Grenoble) a także neutronów (ILL - Grenoble).
-
Design of thermal cutting table - welding technology and construction
PublicationW referacie przedstawiono pionierską pracę dyplomową stopnia inżynierskiego, wykonaną przez dwoje studentów Wydziału Mechanicznego Politechniki Gdańskiej zgodnie z systemem CDIO (Conceive, Design, Implement, Operate). W ramach pracy studenci zaprojektowali stół do cięcia termicznego metali (rysunki i obliczenia wytrzymałościowe metodą elementów skończonych), opracowali technologię spawania stołu oraz samodzielnie go wykonali. Stół...
-
Final state of thermal evolution of Jupiter-type planet
Publication -
Thermal decomposition of polyurethane pressure-sensitive adhesives dispersions
Publication -
Thermal degradation of copolymers based on selected alkyl methacrylates
Publication -
Structure redetermination, transport and thermal properties of the YNi3Al9 compound
PublicationSingle crystals of completely ordered variant of the YNi3Al9 compound were grown by self-flux method with excess of aluminum. The crystal structure of the title compound was redetermined from single crystal X-ray diffraction data. The structure adopts ErNi3Al9 type, space group R32, parameters of the unit cell a = 7.2838(2) Å, c = 27.4004(8) Å. The growth of relatively large single crystals of the YNi3Al9 compound, having completely...
-
Deep Instance Segmentation of Laboratory Animals in Thermal Images
PublicationIn this paper we focus on the role of deep instance segmentation of laboratory rodents in thermal images. Thermal imaging is very suitable to observe the behaviour of laboratory animals, especially in low light conditions. It is an non-intrusive method allowing to monitor the activity of animals and potentially observe some physiological changes expressed in dynamic thermal patterns. The analysis of the recorded sequence of thermal...
-
Smart city and fire detection using thermal imaging
PublicationIn this paper, we summarize the results obtained from fire experiments. The aim of the work was to develop new methods of fire detection using IR thermal imaging cameras and dedicated image processing. We conducted 4 experiments in different configurations and with the use of different objects. The conducted experiments have shown the great usefulness of infrared cameras for detecting the seeds of a fire. Even cheap low-resolution...
-
Molecular Dynamics simulations of thermal conductivity of penta-graphene
PublicationThe thermal conductivity of penta-graphene (PG), a new two dimensional carbon allotrope and its dependence on temperature, strain, and direction are studied in this paper. The thermal conductivity of PG is investigated using a non-equilibrium molecular dynamics simulation (NEMD) with the Two Region Method by applying the optimized Tersoff interatomic potential. Our study shows that the thermal conductivity of PG (determined for...
-
Thermal and Mechanical Behavior of Elastomers Incorporated with Thermoregulating Microcapsules
PublicationPolyurethane (PU) is one of the principal polymers in the global plastic market thanks to its versatility and continuous improvement. In this work, PU elastomeric materials having thermoregulating properties through the incorporation of microcapsules (mSD-(LDPE·EVA-RT27)) from low-density polyethylene and vinyl acetate containing paraffin®RT27 as PCM were produced. Elastomers were synthesized while varying the molar ratio [NCO]/[OH]...
-
Thermal imaging in automatic rodent’s social behaviour analysis
PublicationLaboratory rodent social behaviour analysis is an extremely important task for biological, medical and pharmacological researches. In this work thermal images features that facilitate analysis are presented. Methods to distinguish objects on the basis of thermal distribution are tested. Actions of grooming or biting one rodent by another - important social behaviour incidents - are clearly visible...
-
Processing, Performance Properties, and Storage Stability of Ground Tire Rubber Modified by Dicumyl Peroxide and Ethylene-Vinyl Acetate Copolymers
PublicationIn this paper, ground tire rubber was modified with dicumyl peroxide and a variable content (in the range of 0–15 phr) of ethylene-vinyl acetate copolymers characterized by different vinyl acetate contents (in the range of 18–39 wt.%). Modification of ground tire rubber was performed via an auto-thermal extrusion process in which heat was generated during internal shearing of the material inside the extruder barrel. The processing,...
-
Calibration of the thermal desorption-gas chromatography-mass spectrometry system using standards generated in the process of thermal decomposition of chemically modified silica gel
Publication -
Thermal Energy Development in Magnetohydrodynamic Flow Utilizing Titanium Dioxide, Copper Oxide and Aluminum Oxide Nanoparticles: Thermal Dispersion and Heat Generating Formularization
PublicationThe main aim of this article heat transfer in thermal engineering deals with the production, use, transformation, and transfer of thermal energy. Engineering and industrial fields including food packaging, the production of food additives, electronic cooling, microturbines, etc. heavily rely on heat transmission. Due to its intriguing potential in industries like the production of polymers, paper, crystal glass, etc., scientists...
-
Enhancement of PUR/PIR foam thermal stability after addition of Zostera marina biomass component investigated via thermal analysis and isoconversional kinetics
PublicationIn the present work, a thorough thermogravimetric (TG) analysis of bio-based polyurethane–polyisocyanurate (PUR–PIR) foams in both nitrogen and oxygen atmosphere is performed. A sustainable element of the foam is a biopolyol obtained via acid-catalyzed liquefaction of Zostera marina and Enteromorpha Algae biomass. Based on isoconversional analysis and apparent activation energies, several conclusions are obtained. In contradiction...
-
Mn-Co spinel coatings on Crofer 22 APU by electrophoretic deposition: Up scaling, performance in SOFC stack at 850 °C and compositional modifications
PublicationCeramic coatings for metallic interconnects play a key role in limiting corrosion and chromium evaporation in solid oxide cells. This study presents the upscaling of the electrophoretic deposition (EPD) technique to process Mn-Co spinels on real-dimension Crofer 22 APU interconnects and the test in a SOFC stack. Area specific resistance of long-term test conducted for 5000 h at 850 °C demonstrated that two-steps sintering has a...
-
Experimental Investigations on the Influence of Coil Arrangement on Melting/Solidification Processes
PublicationThe latent heat thermal energy storage units are very popular because of their high energy density and almost close to constant temperature during the charging/discharging. In the present study has been proposed new shell-and-coil geometry with a shifted coil position to enhance the performance of phase change thermal magazine. The experimental investigations have been performed both for the melting and solidification process of...
-
Thermal imaging of skin burns. 9th European Congress of Thermology.
PublicationArtykuł przedstawia wyniki badań in-vivo diagnostyki oparzeń skóry z użyciem metod termograficznych. Wykazano iż na podstawie obrazu termograficznego możliwa jest klasyfikacja głębokości oparzenia.
-
LSCO films for bolometer applications manufactureted without thermal processing.
PublicationPrzedstawiono proces produkcji warstw LSCO przeznaczonych na bolometry IR wykonane technologią nie wymagającą obróbki termicznej.
-
Thermal sequences database of the skin flaps in breast reconstruction and burns
PublicationThis paper presents a database of Active Dynamic Thermography (ADT) thermal sequences gathered throughout 6 year study on ADT application in skin flap blood perfusion monitoring and burn wounds diagnosis. For skin flap monitoring the database comprises of data collected during three different breast reconstruction procedures. The patients were monitored pre, intra and post surgically within 90 days period. The sequences were used...
-
Thermal sequences database of the skin flaps in breast reconstruction and burns
PublicationThis paper presents a database of Active Dynamic Thermography (ADT) thermal sequences gathered throughout 6 year study on ADT application in skin flap blood perfusion monitoring and burn wounds diagnosis. For skin flap monitoring the database comprises of data collected during three different breast reconstruction procedures. The patients were monitored pre, intra and post surgically within 90 days period. The sequences were used...
-
Thermal energy storage using stearic acid as PCM material
PublicationThis work presents an experimental study of thermal energy storage by use of PCM. The aim of the study was to establish the influence of different inlet temperature of heat transfer fluid (HTF) and different Reynolds number of HTF on intensity of charging process. The PCM used in this study was stearic acid and water was used as HTF. A copper helical coil mounted in cylindrical container served as a heat transfer surface.
-
High temperature corrosion of evaporator tubes with thermal sprayed coatings
PublicationDegradation examinations of outer surface of low-emission steam boiler evaporator tubes are presented in the paper. Metallographic evaluation of scale morphology, its micro sites chemical composition analysis and distribution of elements on cross sections have been performed. Water-wall tubes were exposed in steam boiler for up to two years period. Common tubes made of 16Mo3 steel suffered sulphide and molten salts corrosions....
-
Thermal properties of dense polymer-derived SiCN(O) glasses
Publication -
Effect of thermal modifications of potato starch on its selected properties
Publication -
Thermal Transitions in P3HT:PC60BM Films Based on Electrical Resistance Measurements
Publication -
Thermal and optical properties of PMMA films reinforced with Nb2O5 nanoparticles
Publication -
The Investigation of Thermal and Optical Properties of Semiconducting Nanostructural Hybrid Films
Publication -
Harmful biological agents in municipal waste thermal treatment plants
Publication -
Design and evaluation of a flow-to-frequency converter circuit with thermal feedback
Publication -
Thermodynamics of the thermal decomposition of calcium oxalate monohydrate examined theoretically
Publication -
Photoelectrochemical and thermal characterization of aromatic hydrocarbons substituted with a dicyanovinyl unit
Publication -
Induction heating laboratory stand for estimating thermal properties of a charge
Publication -
Thermal decomposition of surface compounds for the generation of small quantities of acetaldehyde
Publication -
Generation of standard gaseous mixtures by thermal decomposition of surface compounds
Publication -
The thermal effort during marine steam turbine flooding with water
PublicationThe work discussed an extreme case of cooling a steam turbine. The ship's steam turbine was used as an example. In marine transport units with low-speed engines dominate, however, there are also units with steam turbines. An example of analysed marine steam turbine is shown in Fig. 1. When considering the issue of cooling steam turbines, it is necessary to estimate the extreme conditions that may occur during operation of the turbine....
-
Preliminary Investigation on Auto-Thermal Extrusion of Ground Tire Rubber
PublicationGround tire rubber (GTR) was processed using an auto-thermal extrusion as a prerequisite to green reclaiming of waste rubbers. The reclaimed GTR underwent a series of tests: thermogravimetric analysis combined with Fourier-transform infrared spectroscopy (TGA-FTIR), scanning electron microscopy (SEM), Fourier-transform infrared spectroscopy (FTIR), and static headspace and gas chromatography-mass spectrometry (SHS-GC-MS) in order...
-
The influence of Be addition on the structure and thermal properties of alkali-silicate glasses
PublicationBe-Na-(Li)-Si oxide glasses containing up to 15 mol% of BeO were prepared. Their structure was characterized by X-ray powder diffraction and Raman as well as infrared spectroscopic techniques, while their chemical compositions were examined by Inductively Coupled Plasma Optical Emission Spectrometry. All materials were found to be amorphous and contain Al contaminations from minor dissolution of the alumina crucibles. The results...
-
Thermal-Hydraulic Studies on the Shell-and-Tube Heat Exchanger with Minijets
PublicationIn this paper a patented design of a heat exchanger with minijets, with a cylindrical construction is presented. It is followed by the results of its systematic experimental investigations in the single-phase convection heat transfer mode. Based on these results, validation of selected correlations (coming from the literature) describing the Nusselt number was carried out. An assessment of the heat exchange intensification level...
-
An advanced thermal-FSI approach of an evaporation of air heat pump
PublicationThe paper presents selected problems of numerical modeling of an advanced thermal-FSI approach of evaporator of air heat pomp. The example of a fin-tube evaporator has been studied, focusing on obtaining of heat exchanger characteristics applying two-phase flow model for the in-tube refrigerant flow. Special attention is given to heat transfer between separated medium for different air velocity and changed refrigerant mass flow...
-
THERMAL ANALYSIS AND DESIGN OF HYBRID MICROCHANNEL-MICROJET TEST PROBE
PublicationThe paper presents the numerical investigation of a microjet- microchannel cooling module. In which microjets of water are impinging into the microchannels and forming a liquid film on the impingement surface. Applied technology takes benefits from two very attractive heat removal techniques. When lminar jets are impinging on the surface have a very high kinetic energy at the stagnation point, also in microchannels boundary layer...
-
THERMAL ANALYSIS AND DESIGN OF HYBRID MICROCHANNEL -MICROJET TEST PROBE
PublicationAccurate control of cooling parameters is required in ever wider range of technical applications. It is known that reducing the flow hydraulic diameter to an increase in the economy of cooling and improves its quality (Mikielewicz and Muszyński 2009). Present study describes research results related to the design and construction of the test stand for hybrid microjet- microchannel cooling modules study, which may be applied in...
-
Active Dynamic Infrared Thermal Imaging in Burn Depth Evaluation
PublicationThe aim of this study was to find the relationship between active dynamic thermography (ADT) with cold excitation and burn depth. This new modality of evaluation of burns seems to be an attractive proposal for quantitative classification, allowing proper choice of burn wound treatment: conservative or surgical, especially compared with static thermography. The work was an in vivo experiment on domestic pigs, and a small number...
-
Thermal and mechanical properties of polyurethanes modified with L-ascorbic acid
PublicationIn this study we report the thermal and mechanical properties of polyurethanes modified with ascorbic acid (AA). Ascorbic acid was used as a modifier at concentration of 1 or 2 mass%. The antioxidative properties of AA may improve the biocompatibility of the obtained materials, which were designed for biomedical applications. In this paper we describe characterization of obtained unmodified and ascorbic acid modified polyurethanes...