displaying 1000 best results Help
Search results for: INCLINED MAGNETIZED PROCESS
-
Process Control of Biogas Purification Using Electronic Nose
PublicationNowadays, biogas produced from landfills and wastewater treatment plants or lignocellulosic biomass is important sustainable and affordable source of energy. Impurities from biogas stream can cause a serious odor problem, especially for residents of areas immediately adjacent to production plants. Therefore, biogas pre-treatment is necessary to protect engines that convert biogas into energy and in order to increase the specific...
-
Granulometric characterization of Arctic driftwood sawdust from frame sawing process
PublicationArctic driftwood can be used as an alternative source of wood as construction timber and furniture material, especially in Iceland and Greenland. The use of Arctic driftwood can help in the fight against climate change, by developing land reforestation processes and reducing the volume harvested wood from forests and sustainability of harvesting processes. In this paper the results of an analysis of the effect of long-term residence...
-
The process of fuzzy model development for the case of polish internet mortgage market
PublicationThe aim of the paper is to present the conceptual description of fuzzy model representing the Polish Internet mortgage market. The first part of the paper consists of assessment and verification of model variables which are important for the Polish Internet Mortgage Market. This process begins with the initial set of variables which was used previously for the rule based model of the same market. As numerous aspects of the market...
-
Pyrolysis Process of Whole Waste Tires as a Biomass Energy Recycling
PublicationThe article is devoted to the description of material recycling of whole waste tires, including a new method of pyrolysis process, resulting in the final products: technically oil fractions (rubber plasticizer of rubber compounds) or diesel fuels (light, medium and heavy), activated carbon, gas fuel and steel scrap. Operational and performance tests of the first version of the pilot plant, consisting of three contributions cooperating...
-
Fragmentation of Hydrographic Big Data Into Subsets During Reduction Process
PublicationThe article presented problems of fragmentation of hydrographic big data into smaller subsets during reduction process. Data reduction is a processing of reduce the value of the data set, in order to make them easier and more effective for the goals of the analysis. The main aim of authors is to create new reduction method. The article presented the first stage of this method – fragmentation of bathymetric data into subsets. It...
-
The Process of Building Civil Society against the Shortcomings of Polish Planning Legislation
PublicationThe article presents the main assumptions of the project of Coastal Strip development in Gdansk. According to the authors best knowledge this is the first pro publico bono project in Poland in a large area of the city formed on the initiative of and elaborated by the city's inhabitants supported by two NGOs. Successive stages of the project preparation are discussed on the background of the shortcomings of Polish planning law...
-
Planowanie realizacji budowy przy użyciu programu iGrafx Process 2003.
PublicationW artykule przedstawia się uproszczony przykład zastosowania programu iGrafx Process 2003 do zaplanowania realizacji przedsięwzięcia składającego się z kilku powtarzalnych zadań. Celem przeprowadzenia symulacji komputerowej jest określenie optymalnej wielkości rytmu w realizacji kolejnych zadań, przy uwzględnieniu zadanego terminu zakończenia przedsięwzięcia oraz racjonalnego wykorzystania dostępnych w przedsiębiorstwie środków...
-
Hydro Power Plant in the Process of Voltage Control in the Electric Power System and the System Restoration
PublicationThe article covers selected issues related to the share of hydroelectric power in the process of rebuilding the power system after black-out and voltage control during that process. Selected results of measurements made during the creation of the transmission chain for the need to start a block of a thermal power plant from a hydroelectric power plant were presented.
-
The process of identification of the track's geometrical layout and the alignment project based on the of satellite measurements
PublicationIn the paper a methodology of restoring of railway track’s geometrical shape in a horizontal plane on the base of conducted mobile satellite surveying was presented. The authors proposed a calculating algorithm for designing the track sections placed in horizontal arcs. In the algorithm an analytical methodology with mathematical formulas is applied. The procedure has an universal character, i.e. provides the possibility of varying...
-
Laboratory bioreactor with pH control system for investigations of hydrogen production in the dark fermentation process
PublicationThe work presents the construction of a low-cost research bioreactor equipped with a pH control sys-tem. The developed bioreactor was applied for hydrogen production in the dark fermentation process using Enterobacter aerogenes ATCC 13048. Presented paper compares the results obtained during the process without and with pH regulation for different feed materials: glucose, energetic poplar hydro-lysates, acid whey and glycerol....
-
[Soft Skills] 2 YEAR Didactic methods in the modern teaching process
e-Learning Courses{mlang pl} Dyscyplina: wszystkie dyscypliny Zajęcia obowiązkowe dla doktorantów 2 roku Prowadząca: dr hab. Joanna Mytnik, prof. uczelni Liczba godzin: 15 Forma zajęć: warsztaty {mlang} {mlang en} Discipline: all disciplines Obligatory course for 2nd-year PhD students Academic teacher: Joanna Mytnik, Ph.D., ass. prof. Total hours of training: 15 teaching hours Course type: workshop {mlang} Soft skills, area I - didactic...
-
Numerical modelling of the mesofracture process of sintered 316L steel under tension using microtomography
PublicationThis paper concerns numerical modelling of the deformation process, taking into account the local fracture of porous 316L sinters at the mesoscopic scale using the finite element method. Calculations are performed with the use of geometrical models, to map the realistic shape of the porous mesostructure of the material, obtained by means of computed microtomography. The microtomographic device has limited and insufficient measurement...
-
The role of urban movements in the process of local spatial planning and the development of participation mechanism
PublicationIn civil societies, urban movements are one of the tools in the process of spatial governance. In Poland, urban activism is beginning to develop together with a budding participation in public life. Therefore, there is a need to assess the scope and effects of the urban movements’ actions. The aim of the study was to determine and evaluate their impact on the spatial development in three Polish cities - Poznań, Gdańsk and Gdynia, especially...
-
Disruption of the communication process on the example of ALEP-PL web application
PublicationBy creating a dedicated web service, such as the presented ALEP-PL solution, you can not assume that its users have suffcient knowledge of the energy sector. This application is dedicated to the local energy planning. The ALEP-PL makes it easier to incorporate in the planning of key players in the local energy market. This group of ALEP-PL users represents mainly the ocials of energy companies and specialist offcers. In the paper...
-
The process generation of WWTP models for optimization of activated sludge systems
PublicationThe objective of water and wastewater utilities, which are responsible for optimization of wastewater treatment plant operation, is threefold: environmental protection, saving money, and mitigation of pollutant emissions, both to water and air. The performed study aimed to assess the process generation of WWTP models that improve activated sludge systems operation, by means of new developed Mantis2 model. This model accounts for...
-
Experience with instantiating an automated testing process in the context of incremental and evolutionary software development
PublicationThe purpose of this article is to present experiences from testing a complex AJAX-based Internet-system which is under development for more than five years. The development process follows incremental and evolutionary lifecycle model and the system is delivered in subsequent releases. Delivering a new release involves both, the new tests (related to the new and/or modified functionalities) and the regression tests (after their...
-
FPGA Based Real Time Simulations of the Face Milling Process
PublicationThe article presents a successful implementation of the milling process simulation at the Field-Programmable Gate Array (FPGA). By using FPGA, very rigorous Real-Time (RT) simulation requirements can be met. The response time of the FPGA simulations is significantly reduced, and the time synchronization is better than in a typical RT system implemented in software. The FPGA-based approach is characterized by enormous flexibility...
-
Bidirectional voting and continous voting concepts as possible use of Internet in democratic voting process
PublicationDemocracies need elections for choosing their authorities and governments.This process has many factors that shape today's procedures. However, the Internet is a medium that may change possibilities and elections. The main issue is concern on how changes may influence the whole democratic process. this paper shows two possible ideas - that of bidirectional voting and continous voting., and considers possible reasons for introducing...
-
Possibilities of Leachate Co-Treatment Originating from Biogas Production in the Deammonification Process
PublicationIn the methane fermentation process, sewage sludge is the single substrate or serves as a co-substrate with the addition of various waste products. After the treatment stable digestate is obtained, which consists of two phases solid and liquid. Liquid phase, called as a leachate, due to the high content of nutrients must be treated before they are discharged into the final receiver. Physical and chemical methods of leachate treatment...
-
PARAMETERS OF THE ELECTROPHORETIC DEPOSITION PROCESS AND ITS INFLUENCE ON THE MORPHOLOGY OF HYDROXYAPATITE COATINGS. REVIEW
PublicationMetallic materials intended for bone implants should exhibit not only appropriate mechanical properties, but also high biocompatibility. The surface treatment modifications, for example acidic treatment, laser treatment, ion implantation and deposition of highly biocompatible coatings, are practiced. One of the most popular methods of surface modification is to deposit hydroxyapatite (HAp) coatings. HAp naturally occurs in human...
-
The sensitiveness of the speed of pile displacement to speed variations of hammer in beating down process
PublicationIn this paper there is presented dynamical system described speed of pile displacement during beating down process. Its response is determined by using Heaviside operator. There is introduced the convergence with regulator in partially ordered space. There is given an answer to the question, whetdisplacement is sensitive to hammer's speed variations.
-
International Journal of Business Process Integration and Management
Journals -
AN INTELLIGENT SYSTEM TO SUPPORT THE DESIGN PROCESS OF HYBRID PHOTOVOLTAIC INSTALLATIONS
PublicationThe paper presents the final version of intelligent system to support the design process of hybrid photovoltaic systems supported by fuel cells and / or thermoelectric generators developed and constructed at the Institute of Electron Technology, as well as to conduct experiments and research. A block diagram of the system and the selection of its components is described and discussed. The paper considers the availability of the...
-
Method of Monitoring of the Grinding Process with Lapping Kinematics Using Audible Sound Analysis
PublicationUtilising microphones as audible sound sensors for monitoring a single-side grinding process with lapping kinematics is presented in the paper. The audible sound generated during grinding depended on the cutting properties of electroplated tools with D107 diamond grains and different thicknesses of the nickel bond. The tool wear affected the obtained technological effects such as material removal rate and the surface roughness...
-
Removal efficiency of phenol by ozonation process with calcium peroxide from aqueous solutions
PublicationPhenol has been introduced as a priority pollutant by the US Environmental Protection Agency. Advanced oxidation processes (AOPs) are one of the most efcient methods for removal of non-degradable organic pollutants in aqueous solutions. The removal efciencies of phenol and COD under optimal conditions pH=3, phenol concentration=5 mg/L, CaO2 concentration=0.025 mg/L, temperature 25 °C, 1 g/min ozonation rate and contact time=90...
-
Green`s function methods for Mathematical modeling of unidirectional diffusion process in isothermal metals bonding process
PublicationPodano wykorzystanie funkcji Greena w rozwiązaniu matematycznego modelu dyfuzji jednowymiarowej podczas izotermicznego łączenia metali.
-
Analysis of abrasive particle trajectories during single-sided lapping process with driven conditioning ring
PublicationIn this paper new kinematics systems were studied for a single lapping process. In order to ensure the constant profile wear of the tool a standard kinematic system can be changed. Lapping is carried out by applying loose abrasive grains between two surfaces and causes a relative motion between them. The result is a finish of multi-directional lay. During process, the mechanism of surface formation are decisively affected by a...
-
Optimizing the process of railway geometrical layout designing with multi-criteria assessment method
PublicationThe paper presents the main assumptions of the Multi-criteria assessment method used in process of upgrading the railway geometrical layout. The advantages of metaheuristic search were described. The criteria influencing the investment were defined. The fitness function used in the analysis was described. The example of using the optimization algorithm with the help of self developed computer software was described.
-
A new multi-process collaborative architecture for time series classification
PublicationTime series classification (TSC) is the problem of categorizing time series data by using machine learning techniques. Its applications vary from cybersecurity and health care to remote sensing and human activity recognition. In this paper, we propose a novel multi-process collaborative architecture for TSC. The propositioned method amalgamates multi-head convolutional neural networks and capsule mechanism. In addition to the discovery...
-
ChatGPT - opportunities or threats in the educational process
Publication -
Water Purification by Membrane Distillation Process
Publication -
The fermentation process integrated with membrane distillation
Publication -
Heat transport in the membrane distillation process
Publication -
Alkaline scaling in the membrane distillation process
Publication -
Influence of sulphanilamide in wastewater on Anammox process
PublicationBadano wpływ krótko- oraz długookresowej ekspozycji mieszanej kultury Anammox na działanie sulfonamidu. Otrzymane wyniki potwierdziły, że sulfanilamid (SA)hamuje proces Anammox. Wyższe stężenia SA powodowały silniejszy efekt inhibicji usuwania związków azotu ze ścieków. Natomiast długookresowe testy potwierdziły hipotezę, że wydłużenie czasu ekspozycji mikroorganizmów Anammox na działanie SA skutkuje obniżeniem stopnia inhibicji...
-
The influence of antibiotics on the anammox process — a review
Publication -
Nutrition in the age-related disablement process
Publication -
DESIGN, DESIGN PROCESS AND ARCHITECT’S POSITION
Publication -
Factors of change in the planning and control process
PublicationZmianom podlegajš wszystkie procesy realizowane w organizacji, również proces planowania i sterowania. W rozdziale przedstawiono klasyfikację czynników zmiany tego procesu i scharakteryzowano poszczególne rodzaje czynników. Przedstawiono również ogólne wytyczne dla procesu identyfikacji i pomiaru czynników zmiany procesu planowania i sterowania. Zaprezentowano też przykładowe mierniki czynników zmiany, zgodne z atrybutami modelu...
-
Global Product as a Result of Globalization Process
Publication -
Modelling of dryout process in an annular flow
PublicationW pracy pokazano teoretyczny model kryzysu wrzenia przy wysokich stopniach suchości, który jest modyfikacją modelu proponowanego wcześniej przez Sedlera i Mikielewicza. Model wysychania filmu cieczowego w przepływie pierścieniowym składa się z różniczkowych równań bilansu masy zapisanych dla filmu na ściance i kropel w rdzeniu przepływu. Rozwiązanie układu równań wymaga znajomości gęstości strumienia masy kropel wytrącających się...
-
The control system of the yeast drying process
Publication -
Simulation of fracture process in fibrous concrete
PublicationArtykuł omawia wyniki modelowania procesu zarysowania w elementach betonowych zawierające stalowe włókna przy zastosowaniu dyskretnego modelu kratownicowego. Beton był modelowany na poziomie mezoskali z uwzględnieniem 5 faz: kruszywa, zaczynu cementowego, włókien i obu stref kontaktu. Obliczenia wykonano dla jednoosiowego ściskania oraz jednoosiowego rozciągania.
-
The effect of surfactants on activated sludge process
PublicationBadano wpływ anionowego surfaktantu (SDBS) na proces biologicznego oczyszczania ścieków metoda osadu czynnego. Stwierdzono, że stężenie SDBS powyżej 50 mg/l miało wyraźny wpływ na przemiany związków azotu i fosforu w czasie oczyszczania ścieków. Wpływ badanego związku na usuwanie związków organicznych (wyrażonych jako ChZT) był mniej wyraźny.
-
Evaluation of change in planning and control process
PublicationSpecyfikacja kryteriów i obszarów system pomiaru i oceny zmiany procesu planowania i sterowania oraz przypisanie kluczowych wskaźników poszczególnym obszarom stanowi podstawowy cel rozdziału. Wybrane wskaźniki umożliwiają ocenę cząstkowych efektów zmian w procesie planowania i sterowania. Dokonanie kompleksowej oceny wymaga budowy modelu oceny efektywności zmian w procesie planowania i sterowania. Jego ogólne założenia zostały...
-
RESHAPING THE GDANSK HARBOR –THE CONTINUOUS PROCESS
PublicationGdańsk is the harbour city with a history of more than 1000 years. For many centuries the harbour structures were evolving within the central part of the historic city centre, and – in result – a specific urban structures associated with these functions were created. But the evolution of the maritime technology as well as new needs regarding servicing the ships and cargo-handling activities effected in creation of the more modern...
-
Modelling of dryout process in annular flow
PublicationW pracy pokazano teoretyczny model kryzysu wrzenia przy wysokich stopniach suchości, który jest modyfikacją modelu proponowanego wcześniej przez Sedlera i Mikielewicza. Model wysychania filmu cieczowego w przepływie pierścieniowym składa się z różniczkowych równań bilansu masy zapisanych dla filmu na ściance i kropel w rdzeniu przepływu. Rozwiązanie układu równań wymaga znajomości gęstości strumienia masy kropel wytrącających się...
-
Appraisal of a hybrid air cleaning process
Publication -
Towards a process based management system for oil port infrastructure in context of insurance
PublicationThis article addresses selected methodological aspects of a process based management system based on analysis of hazards and threats and risk evaluation for an oil port infrastructure in context of insurance. The oil port terminal is regarded as important system of the critical infrastructure that require careful system oriented approach to deal with integrated aspects of environmental, safety and security management to reduce...
-
Automated Classifier Development Process for Recognizing Book Pages from Video Frames
PublicationOne of the latest developments made by publishing companies is introducing mixed and augmented reality to their printed media (e.g. to produce augmented books). An important computer vision problem that they are facing is classification of book pages from video frames. The problem is non-trivial, especially considering that typical training data is limited to only one digital original per book page, while the trained classifier...
-
Removal of Volatile Organic Compounds (VOCs) from Air: Focus on Biotrickling Filtration and Process Modeling
PublicationBiotrickling filtration is a well-established technology for the treatment of air polluted with odorous and volatile organic compounds (VOCs). Besides dozens of successful industrial applications of this technology, there are still gaps in a full understanding and description of the mechanisms of biotrickling filtration. This review focuses on recent research results on biotrickling filtration of air polluted with single and multiple...
-
New approaches to cutting resistance estimation of wood cutting process with circular-saw blades
PublicationTheoretical and experimental determination of values of cutting resistance belongs to the basic and simultaneously the most developed field of mechanics of this process. Energetic effects of wood sawing process are mainly calculated on the basis of the specific cutting resistance which, in wood cutting, is a function on a lot of factors. In this paper new method for calculation of cutting resistance is described. The latter method...
-
Comparison of the Effects of Conventional and Alternative External Carbon Sources for Enhancing of the Denitrification Process
PublicationFood industry effluents are considered a potential alternative for methanol when seeking external carbon sources to enhance denitrification in municipal wastewater treatment plants (WWTPs). The aim of this study was to determine the immediate effects of dosing different carbon sources on the denitrification capability of process biomass from the "Wschod" WWTP in Gdansk (northern Poland). Five carbon sources, including settled wastewater,...
-
Sensitivity analysis in design process of sandwich U-shaped composite footbridge
PublicationThe structure of the sandwich composite footbridge of a 14 metre span length and U-shaped cross-section was analysed. Sensitivity analysis was performed to support the design process of this innovative object. Linear discrete sensitivity analysis was performed by means of finite element method. The influence of vari-ation of several design variables i.e. thicknesses of inner and outer laminates on the mid-span deflection, as-sumed...
-
An application supporting the educational process of the respiratory system obstructive diseases detection
PublicationThe paper presents a description of functioning of a platform supporting the detection of obstructive diseases in the respiratory system education process. A 16-parameter model of the respiratory system simulated in the MATLAB/Simulink environment was set in the role of the tested patient. It has been linked to the control layer, developed in the LabVIEW environment, using the SIT library (Simulation Interface Toolkit). This layer...
-
Miniaturization of ESPAR Antenna Using Low-Cost 3D Printing Process
PublicationIn this paper, the miniaturized electronically steerable parasitic array radiator (ESPAR) antenna is presented. The size reduction was obtained by embedding its active and passive elements in polylactic acid (PLA) plastic material commonly used in low-cost 3D printing. The influence of 3D printing process imperfections on the ESPAR antenna design is investigated and a simple yet effective method to compensate them has been proposed....
-
WEB-CAM AS A MEANS OF INFORMATION ABOUT EMOTIONAL ATTEMPT OF STUDENTS IN THE PROCESS OF DISTANT LEARNING
PublicationNew methods in education become more popular nowadays. Distant learning is a good example when teacher and student meet in virtual environment. Because interaction in this virtual world might be complicated it seems necessary to assure as much methods of conforming that student is still engaged in the process of learning as it is possible. We would like to present assumption that by means of web-cam we will be able to track facial...
-
Migration of container terminals as their natural process of evolution: Case study of Gdańsk and Gdynia ports
PublicationThe paper proposes a theoretical model of container terminals and container port development, based on the life cycle theory, threshold theory and catastrophe theory, and in references to Kuznets' swings (interpreted as waves of infrastructural investments), and Kondratiev long economic waves. The aim of this model is to explain the development process of a container terminal and a port within one technological generation, as...
-
Combined partial denitrification/anammox process for nitrogen removal in wastewater treatment
PublicationRecently, the combined partial denitrification and anammox (PD/anammox) has received special attention as a viable alternative for N removal using organic matter present in municipal wastewater. In comparison with conventional nitrification-denitrification, PD/anammox provides enormous opportunities to achieve sustainable wastewater treatment due to the lack of dissolved oxygen (DO) demand, a smaller amount of organic carbon (C)...
-
Optimisation of turbine shaft heating process under steam turbine run-up conditions
PublicationAn important operational task for thermal turbines during run-up and run-down is to keep the stresses in the structural elements at a right level. This applies not only to their instantaneous values, but also to the impact of them on the engine lifetime. The turbine shaft is a particularly important element. The distribution of stresses depends on geometric characteristics of the shaft and its specific locations. This means a groove manufactured...
-
Evaluation of affective intervention process in development of affect-aware educational video games
PublicationIn this paper initial experiences are presented on implementing specific methodology of affective intervention design (AFFINT) for development of affect-aware educational video games. In the described experiment, 10 student teams are to develop affect-aware educational video games using AFFINT to formalize the whole process. Although all projects are still in progress, first observations and conclusions may already be presented.
-
Tribological Properties of Thermoplastic Materials Formed by 3D Printing by FDM Process
PublicationThe dataset entitled 3D printed ABS thermoplastic vs. steel. Dry sliding wear test in constant load & velocity ring on flat configuration. Test parameters: print layer thickness and orientation. Test symbol: 019_h_4 contains: the time base (expressed in seconds and minutes), the friction torque for sliding friction, rotational velocity of the counter – specimen (velocity of sliding), friction coefficient, load in the friction contact...
-
Polish waterfront in the process of transformation: The case of Elbląg port city
PublicationThe topic of waterfront transformation is a vast and challenging issue, which in small and medium-sized cities is still unexplored. With growing global interest in the matter of regeneration of city-water relationship and increasing public awareness of the value of waterfront public spaces, actions to transform abandoned waterfront areas have been undertaken in many Polish port cities. City of Elbląg, located in northern Poland,...
-
Machine learning approach to packaging compatibility testing in the new product development process
PublicationThe paper compares the effectiveness of selected machine learning methods as modelling tools supporting the selection of a packaging type in new product development process. The main goal of the developed model is to reduce the risk of failure in compatibility tests which are preformed to ensure safety, durability, and efficacy of the finished product for the entire period of its shelf life and consumer use. This kind of testing...
-
AN INNOVATIVE APPROACH TO PREDICTION ENERGETIC EFFECTS OF WOOD CUTTING PROCESS WITH CIRCULAR-SAW BLADES
PublicationIn the classical approach, energetic effects (cutting forces and cutting power) of wood sawing process are generally calculated on the basis of the specific cutting resistance, which is in the case of wood cutting the function of more or less important factors. The aim of the paper is to present a new calculating model using the application of modern fracture mechanics and to compare cutting parameters of native beech, Bendywood...
-
The role of low-energy electrons in the charging process of LISA test masses
PublicationThe estimate of the total electron yield is fundamental for our understanding of the test-mass charging associated with cosmic rays in the Laser Interferometer Space Antenna (LISA) Pathfinder mission and in the forthcoming gravitational wave observatory LISA. To unveil the role of low energy electrons in this process owing to galactic and solar energetic particle events, in this work we study the interaction of keV and sub-keV...
-
Modular Approach for Modelling Warming Up Process in Water Installations with Flow-Regulating Elements
PublicationThe paper presents a new method for modelling the warming up process of a water system with elements regulating the flow in a stochastic manner. The paper presents the basic equations describing the work of typical elements which the water installation is composed of. In the proposed method, a new computational algorithm was used in the form of an iterative procedure enabling the use of boundary conditions that can be stochastically...
-
Effects of Different Aeration Modes on Ammonia Removal from Sludge Digester Liquors in the Nitritation-Anammox Process
PublicationSludge digester liquors can be responsible for up to one third of the nitrogen load to the biological step of wastewater treatment plants (WWTPs). The conventional process for ammonia removal via two sequential processes, i.e. nitrification and denitrification, is increasingly being challenged by a one-step process in which ammonium is oxidized directly to nitrogen gas e.g. ammonium oxidation (anammox) process. In this novel process,...
-
THE INFLUENCE OF WSR PARAMETER ON PET BOTTLE THICKNESS PROFILE IN SBM FROM PREFORM PROCESS
PublicationFrom a mechanical point of view, the thickness profile of PET bottles manufactured by ISBM process is determined by mechanical and thermal response of blown preforms. From the microscopic point of view the biggest influence on the mechanical and thermal properties of PET bottles have orientation and crystallization processes. From a technological point of view, the thickness profile of PET bottles after manufacture by SBM process...
-
Monitoring the curing process of epoxy adhesive using ultrasound and Lamb wave dispersion curves
PublicationMonitoring the stiffness of adhesives is a crucial issue when considering the durability andstrength of adhesive joints. While there are many studies conducted on specimens madeonly from adhesive, the problem of curing of an adhesive film in real joints is moderatelyconsidered. This paper presents the monitoring of stiffening of epoxy adhesive using ultra-sound. Ultrasonic pulse velocity method was firstly applied for monitoring...
-
Machining process sequencing and machine assignment in generative feature-based CAPP for mill-turn parts
PublicationProcess selection and sequencing, as one of the most complex issues when evaluated from a mathematical point of view and crucial in CAPP, still attract research attention. For the current trend of intelligent manufacturing, machining features (MFs) are the information carriers for workpiece geometry and topology representation. They are basically derived from CAD models and are used by downstream engineering applications. A feature-based...
-
Sewage sludge pretreatment by low thermal disintegration for better efficacy of sludge digestion process
PublicationThe wastewater water treatment plant (WWTP) sector and it is developing technologies strive to be implement circular economy. The methane production from the sludge digestion process constitute promising source of the renewable energy for WWTP and approaching circular economy assumptions. For this reason, the objective of the study was to examine the modification of sludge characteristics due to the low temperature pretreatment....
-
Choosing Exploration Process Path in Data Mining Processes for Complex Internet Objects
PublicationWe present an experimental case study of a novel and original framework for classifying aggregate objects, i.e. objects that consist of other objects. The features of the aggregated objects are converted into the features of aggregate ones, by use of aggregate functions. The choice of the functions, along with the specific method of classification can be automated by choosing of one of several process paths, and different paths...
-
Choosing Exploration Process Path in Data Mining Processes for Complex Internet Objects
PublicationWe present an experimental case study of a novel and original framework for classifying aggregate objects, i.e. objects that consist of other objects. The features of the aggregated objects are converted into the features of aggregate ones, by use of aggregate functions. The choice of the functions, along with the specific method of classification can be automated by choosing of one of several process paths, and different paths...
-
Determination of Moisture Content Profiles of Spruce Wood After High Temperature Process and Air Drying
PublicationThe results of moisture content of wood after the process of its drying under high temperature conditions and air drying are presented. Wood samples, namely spruce (Picea abies Karst.) from the northern part of Pomerania region in Poland, were subject of steam and air drying.The aim of experiments was to measure moisture content of wood in its cross sections using moisture meter WRD-100. The samples of thickness 70 mm and length...
-
The Influence of Low-Temperature Disintegration on the Co-Fermentation Process of Distillation Residue and Waste-Activated Sludge
Publication: Innovative low-temperature disintegration (process temperature 55 ◦C and oxygen concentration 0.2 mg/dm3 ) can be an economically rational technology to intensifying energy production from renewable sources. The proposed process can achieve a degree of disintegration—under optimal conditions—of about 50%, which is excellent when compared with other methods of feed pre-treatment. The low-temperature disintegration of distillation...
-
Studies on the utilization of post-distillation liquid from Solvay process to carbon dioxide capture and storage
PublicationIn this work, a method of precipitated calcium carbonate production from the post-distillation liquid created in the Solvay process and waste carbon dioxide was proposed and investigated. Precipitation was carried out in a model solution of calcium chloride containing ammonia at various molar ratios in relation to Ca2+ ions, while gaseous carbon dioxide was supplied to the reactor as a pure gas or as a mixture with air. It was...
-
Methods of the privatization process of Polish state-owned enterprises in years 1990‒2015
PublicationThis article presents methods of the privatization process of state-owned enterprises in Poland in the period of years 1990‒2015. The author presents the change of number of state-owned companies over the selected period as well as describes the main methods of ownership transformation used in Poland. First part presents the mechanism of commercialization. Second discusses the indirect privatization and contribution to NFI. Next,...
-
Modelling AOB-NOB competition in shortcut nitrification compared with conventional nitrification-denitrification process
PublicationIn particular, mainstream deammonification and/or shortened nitrificationdenitrification via nitrite (so-called “nitrite shunt”) is a promising new treatment concept that has the potential to revolutionise how nitrogen removal is achieved at WWTPs. Understanding the role of the AOB/NOB competition in the nitrogen cycle in wastewater treatment systems will change operational strategies of the novel nitrogen removal processes. The...
-
SAWING PROCESS AS A NEW ALTERNATIVE WAY OF DETERMINING SOME WOOD PROPERTIES
PublicationCutting forces (power) could be considered from a point of view of modern fracture mechanics. The developed cutting model, derived from fracture mechanics, includes work of separation (fracture toughness) in addition to plasticity and friction, and also dullness of the cutting edge described by the cutting edge radius. Moreover, forecasting of the shear plane angle for the cutting models, broaden possibilities of energetic effects...
-
The effect of an active force while slide diamond burnishing of wooden shafts upon process quality
PublicationThe quality of the surface of wooden elements that have been turned and burnished has got a crucial meaning in the whole production process flow, since the obtained effects affect the quality of the wooden surface after finishing (coating, painting). In the paper, selected results of the investigation of the effect of the burnishing process on the surface quality of the elements after turning are presented. Research experiments...
-
Process zone in the Single Cantilever Beam under transverse loading. - Part II: Experimental
PublicationThis paper describes an experimental arrangement to evaluate stress/strain fields in the process zone of asymmetric adhesively bonded joints. A transparent polycarbonate flexible beam was bonded to an aluminium alloy rigid block with an epoxy adhesive in a Single Cantilever Beam (SCB) configuration. The flexible adherend was loaded in the direction parallel to the initial crack front at constant rate. To monitor strains induced...
-
Application of electronic nose to effectiveness monitoring of air contaminated with toluene vapors biofiltration process
PublicationThe research presents the application of electronic nose (combined with MLR model) to on-line effectiveness monitoring of biofiltration of air contaminated with hydrophobic, odorous compound (toluene vapors). The research was conducted using two-section biotrickling filter inhabited by Candida environmental isolates. Gas chromatography was used as the comparative technique to obtain reliable quantification of toluene concentration...
-
Modeling the debonding process of osseointegrated implants due to coupled adhesion and friction
PublicationCementless implants have become widely used for total hip replacement surgery. The long-term stability of these implants is achieved by bone growing around and into the rough surface of the implant, a process called osseointegration. However, debonding of the bone–implant interface can still occur due to aseptic implant loosening and insufficient osseointegration, which may have dramatic consequences. The aim of this work is to...
-
Increasing efficiency of technological process by limiting impact of corrosive environment on operation of spiral classifiers
PublicationMost of the technological operations related to the preparation of the output to be enriched and to the production of the final copper concentrate take place with the use of water environment. Water management, besides using innovative technical and technological solutions, is a significant factor in the whole copper ore enrichment process. Mine water resources and surface water of the tailing pond named "Żelazny Most" are the...
-
Process layout planning and optimised product range selection in manufacture of wooden construction sets
PublicationThis paper introduces a systematic deterministic framework for planning and the analysis of facility layouts aimed at manufacturing a variety of parts, as components of specific end products. The essence of the proposed approach lies in the decomposition of a traditional job-shop into layout modules of generic material flow patterns, that inherently yields improved efficiency of the entire system. It entails the use of a relevant...
-
NUMERICAL SIMULATIONS OF HONING PROCESS OF THIN WALL CYLINDER LINERS, WITH CONSTANT AND WITH VARIABLE THICKNESS OF WALL OF HONED PARTS
PublicationNumerical simulations of honing process of thin-wall cylinder liners, with constant and with variable thickness of the wall of honed workpieces can improve and can help to conduct the experimental research of honing process and can improve the honing process. A very valuable research assumption, before performing the numerical analysis of computer simulation of honing process, is the measurement of the real geometry of the honing...
-
Miniaturization of ESPAR Antenna Using Low-Cost 3D Printing Process
PublicationIn this paper, the miniaturized electronically steerable parasitic array radiator (ESPAR) antenna is presented. The size reduction was obtained by embedding its active and passive elements in polylactic acid (PLA) plastic material commonly used in low-cost 3D printing. The influence of 3D printing process imperfections on the ESPAR antenna design is investigated and a simple yet effective method to...
-
Interactive Prototypes in Teaching User-Centred Design and Business Process Modelling
PublicationThis publication describes experiences gathered during the use of interactive prototyping in two areas: design of user interfaces for a touch screen information kiosk and interactive prototyping of business processes. Prototyping is promoted here as a technique useful for both visualizing design concepts and for stimulating communication within relevant teams. Developing interactive prototypes of use interfaces is discussed here...
-
The Influence of Gas Mixture in the Glow-Discharge Nitriding Process of Austenitic Stainless Steel on Characteristic of Nitrided Cases
PublicationAustenitic stainless steels characterize with excellent corrosion resistance, although low mechanical properties. In many cases that limits their exploitation in industrial applications. Moreover, austenitic stainless steel is susceptible to local corrosion in the presence of halide ions. In present works, it was emphasized that the nitriding of austenitic stainless steels gives some potential abilities to obtain beneficial effect...
-
The conception of secure and efficient process of migration into IPv6
PublicationZe względu na wady rozwiązań opartych o tunelowanie, w pracy zaproponowano koncepcję przejścia z IPv4 do IPv6 nie wymagającą od dostawców usług internetowych wzajemnej współpracy, nie narażoną na ataki związane z przekaźnikami, wzajemnym zaufaniem ISP. W koncepcji tej ograniczono tunelowanie do obszaru jednego ISP. W pracy wskazano istotne elementy ograniczające możliwość i zasadność wprowadzania mechanizmów tunelowania. Wskazano...
-
Calcium sulphate scaling in membrane distillation process
Publication -
Fouling in direct contact membrane distillation process
Publication -
Long-term performance of membrane distillation process
Publication -
Effectiveness of Water Desalination by Membrane Distillation Process
Publication -
Tracking of the Multimodal Ordering Process in FePd Alloy
Publication -
Moral problems in the process of polish economy transformation
PublicationArtykuł zawiera uwagi dotyczące problemów etycznych okresu transformacji w Polsce. Podane są przykłady kodeksów i zasadność ich wprowadzenia w firmach. Artykuł zawiera też informacje o realizowanym na Wydziale Zarządzania i Ekonomii PG programie ''Etyka biznesu'' oraz uwagi studentów dotyczące ciekawych problemów,o które program jest poszerzany.
-
Results of abrasive slurry dosage in lapping process
PublicationPrzedstawiono wyniki badań dawkowania zawiesiny ściernej w docieraniu powierzchni płaskich elementów ceramicznych. Analizowano wpływ dawkowania na podstawowe parametry chropowatości powierzchni ceramiki Al2O3 i Al2O3-ZrO2.
-
The Use of Geodata in the Process of the Ventilation of the City of Krakow
Publication -
Modeling of the process of selected fire signaling systems
Publication