Search
Search results for: extraction techniques
-
Optimization of chip removing system operation in circular sawing machine
PublicationThe paper presents the optimization of the wood chips removing system in the sliding table saw. Chips are generated during the cutting of the material. The attention was focused on the upper casing of mentioned system. The methodical experimental studies of the pressure distribution inside the casing during the wood chip removing operation for the selected rotational speed of saw blade with a diameter of 300 mm and 450 mm were...
-
MACHINE LEARNING APPLICATIONS IN RECOGNIZING HUMAN EMOTIONS BASED ON THE EEG
PublicationThis study examined the machine learning-based approach allowing the recognition of human emotional states with the use of EEG signals. After a short introduction to the fundamentals of electroencephalography and neural oscillations, the two-dimensional valence-arousal Russell’s model of emotion was described. Next, we present the assumptions of the performed EEG experiment. Detail aspects of the data sanitization including preprocessing,...
-
Examining Influence of Distance to Microphone on Accuracy of Speech Recognition
PublicationThe problem of controlling a machine by the distant-talking speaker without a necessity of handheld or body-worn equipment usage is considered. A laboratory setup is introduced for examination of performance of the developed automatic speech recognition system fed by direct and by distant speech acquired by microphones placed at three different distances from the speaker (0.5 m to 1.5 m). For feature extraction from the voice signal...
-
A simplified behavioral MOSFET model based on parameters extraction for circuit simulations.
PublicationThe paper presents results on behavior modeling of general purpose Metal-Oxide Semiconductor Field-Effect Transistor (MOSFET) for simulation of power electronics systems requiring accuracy both in steady-state and in switching conditions. Methods of parameters extraction including nonlinearity of parasitic capacitances and steady-state characteristics are based on manufacturer data sheet and externally measurable characteristics....
-
Application of analytical procedure based on accelerated solvent extraction and ion chromatography technique for determination of thiocyanate and other inorganic ions in human placenta samples
PublicationExposure of a pregnant woman during pregnancy is a special case of exposure to toxic substances. Samples of placenta collected for the studies had been prepared with the technique of accelerated solvent extraction and later analyzed for the presence of thiocyanate ion and other inorganic ions, with the use of the technique of ion chromatography. The concentration of thiocyanate ion in placenta samples collected from active smokers...
-
PCR-ELISA: inexpensive alternative to quantitative PCR
PublicationPCR-ELISA (polymerase chain reaction-enzyme linked immunosorbent assay), a combination of PCR and ELISA methods, has been used since late 1980s. The technique is based on specially labelled DNA fragments which are captured by specific DNA sequences and detected by antibodies. The whole procedure of PCR-ELISA is divided into three steps: DNA extraction, PCR reaction and detection by ELISA. The method has been found as very specific...
-
Application of deep eutectic solvents in analytical sample pretreatment (update 2017–2022). Part A: Liquid phase microextraction
PublicationSustainable development in all branches of human activity has become an unequivocal necessity in the last two decades, and green chemistry goes hand in hand with it. Various ways have been proposed in analytical chemistry to meet the current requirements of green chemistry. One such approach is the research of new reagents and solvents for analytical purposes. Deep eutectic solvents (DESs) began being investigated and used in analytical...
-
A review of phosphorus recovery methods at various steps of wastewater treatment and sewage sludge management. The concept of “no solid waste generation” and analytical methods
PublicationPhosphorus deposits around the world are rapidly depleting, therefore phosphorus recovery methods are gaining more and more interest both in science and industry. This article presents the main methods of phosphorus recovery from sewage sludge. The described approaches are divided in two groups: phosphorus recovery from sewage sludge and leachate, and recovery of phosphorus from sewage sludge ashes. The latter seems to have more...
-
Monitoring of CRT by means of impedance multiple measurements - simulation studies
PublicationCardiac resynchronization therapy (CRT) is a very promising treatment for patients with congestive heart failure. An Impedance Cardiography (ICG) is used for evaluation of heart mechanical activity. A simulation study with the use of a FEM model was performed. The developed realistic model of the thorax, based on CT data obtained from examination of a 68-year-old man, consisted of 212 000 tetrahedral elements. Different configurations...
-
Lower Rim Substituted p-tert-Butyl-Calix[4]arene. Part 16. Synthesis of 25, 26, 27, 28-tetrakis(piperidinethiocarbonylmethylene)-p-tert-butylcalix[4]arene and its interaction with metal ions
PublicationThe synthesis, characterisation and X-ray crystal structures of p-tert-butyl-calix[4]arenethioamide L and its complex with lead L-Pb2+ is reported. The cation-binding properties in solution have been assessed by liquid-liquid extraction of the metal picrates from water into dichloromethane and by stability constants determination in acetonitrile using UV-absorption spectrophotometry or potentiometry. The compound was used as active...
-
Statistically efficient smoothing algorithm for time-varying frequency estimation
PublicationThe problem of extraction/elimination of a nonstationary sinusoidal signal from noisy measurements is considered. This problem is usually solved using adaptive notch filtering (ANF) algorithms. It is shown that the accuracy of frequency estimates can be significantly increased if the results obtained from ANF are backward-time filtered by an appropriately designed lowpass filter. The resulting adaptive notch smoothing (ANS) algorithm...
-
Experimental analysis of chip removing system in circular sawing machine
PublicationPaper presents analysis of the process of removing the wood chips generated during the cutting of the material on the circular sawing machine. The attention is focused on the upper cover of the chip removing system. Within the framework of the work a systematic experimental study of pressure distribution in the cover during operation of the selected rotational speed of saw blade with a diameter of 300 mm and 450 mm was carried...
-
Ultrasound-assisted deep eutectic solvent-based liquid–liquid microextraction for simultaneous determination of Ni (II) and Zn (II) in food samples
PublicationA new approach was developed for the simultaneous pre-concentration and determination of Ni (II) and Zn (II) in food samples. This method is based on ultrasound-assisted liquid–liquid micro extraction using hydrophobic deep eutectic solvent (DES) and 1,10-phenanthroline as chelating agent. The effect of several parameters, such as pH, selection and volume of DES, amount of chelating agent, time of sonication and centrifugation,...
-
Novel method of lung area extraction in chest perfusion computed tomography
PublicationChest perfusion computed tomography (pCT) is a useful technique in the medical diagnosis of how organs function. Perfusion CT scans are used to calculate perfusion parameters. In the case of automated methods of lung perfusion parameters calculation, the prior extraction of the lung area is desired to avoid unnecessary calculation in an area outside the lung cross-section and to avoid wasting time on processing signals of no diagnostic...
-
Determination of Terpene Profile in Cape gooseberry (Physalis peruviana L.) with Use of HS-SPME/GCxGC-TOFMS Method
PublicationFresh fruits and products made of them, especially fruit juice, provide the basic energetic substances (simple and complex sugars) and are a source of health beneficial vitamins, macro and microelements, antioxidants and compounds which are classified together with essential oils (for example terpenes), which positively affect human s health. The terpenes profile of cape gooseberry was determined by headspace solid--phase microextraction...
-
Pesticide residues levels in honey from apiaries located of Northern Poland
PublicationConcentration levels of 30 pesticide residues were measured in honey samples collected from apiaries in northern part of Poland (Pomerania) using method based on the QuEChERS extraction followed by liquid chromatography-tandem mass spectrometry with electron spray ionization (LC-ESI-MS/MS). In 29% of the samples were found positive for at least some of the target compounds. Concentration of bifenthrin, fenpyroximate, methidathion,...
-
Transmission parameters of underwater communication channels
PublicationThe underwater environment is tough and demanding as a communication channel for ultrasonic signals. The channel transmission characteristics in marine and inland waters depend much on local bathymetry and changing weather conditions. The architecture and performance of a reliable underwater acoustic communication (UAC) system should allow real-time adaptation of its transmission parameters to a large variety of possible channel...
-
Determination of 3,4-methylenedioxy-α-pyrrolidinobutiophenone (MDPB) in blood. A case report
PublicationSynthetic drugs, known as ‘‘legal highs’’, are still very popular on black market. The determination of their composition are required in courts of law and also to understand what potential users may be subjected to. The interest of new cathinones, e.g. MDPBP, is in view of psychoactive effects that they cause and that, in many cases, they are not controlled by law. The case outlined here concerns 19 years-old man, who was found...
-
Management of low-temperature heat source by ORC aided by additional heat source
PublicationIn the paper presented is a concept to utilize waste heat from the power plant with the aid of the low-temperature ORC cycle. The ORC system is heated from two heat sources, the first one being the flow rate of waste heat obtained from the exhaust gases. Subsequently, the working fluid in the cycle is additionally heated by the condensing steam from the low pressure turbine extraction points increasing in such way the level of...
-
Determination of pharmaceuticals in fish: method optimization and occurrence in different species from Mediterranean rivers
PublicationThe multi-residue analytical method developed, based on accelerated solvent extraction, gel permeation chromatography purification and UPLC-MS/MS analysis allowed the simultaneous determination of 21 pharmaceuticals. Recoveries obtained for most of the target compounds were higher than 50%. The application of UPLC-MS/MS operating in the MRM mode, with two transitions monitored for each compound, provided good sensitivity and selectivity....
-
Greening procedures and analytical parameters. The polychlorinated naphthalenes analysis in complex matrices as proof of concept
PublicationDue to the complexity of analytical procedures employed for the determination of wide spectrum of persistent organic pollutants (POPs), it is important to consider the green character of the applied protocols and propose the greenest solutions. In this review, the green aspects of several analytical procedures used for the determination of polychlorinated naphthalenes (PCNs) (as a representatives of POPs) in different types of...
-
Controlling computer by lip gestures employing neural network
PublicationResults of experiments regarding lip gesture recognition with an artificial neural network are discussed. The neural network module forms the core element of a multimodal human-computer interface called LipMouse. This solution allows a user to work on a computer using lip movements and gestures. A user face is detected in a video stream from a standard web camera using a cascade of boosted classifiers working with Haar-like features....
-
From the multiple frequency tracker to the multiple frequency smoother
PublicationThe problem of extraction/elimination of nonstationary sinusoidalsignals from noisy measurements is considered. This problem is usually solved using adaptive notch filtering (ANF)algorithms. It is shown that the accuracy of frequency estimates can be significantly increased if the results obtained from ANF are backward-time filtered by an appropriately designed lowpass filter. The resulting adaptive notch smoothing (ANS)algorithm...
-
Nanoparticles: Synthesis, characteristics, and applications in analytical and other sciences
PublicationNanoparticles (NPs) are widely employed in different research areas, ranging from analytical chemistry and environmental science to medicine, the agriculture and pharmaceutical industry. This is mainly due to the unique characteristics of NPs and the novelty they introduce in such applications. In analytical chemistry, the role of NPs can differ depending on the nature of the steps involved in analytical process. NPs are probably...
-
A method for a comprehensive lipidomic analysis of flaxseed (Linum usitatissimum) with the use of LC–Q-TOF-MS and dispersive micro-solid-phase (μDSPE) extraction
PublicationFlaxseed (FS) is one of the richest sources of α-linolenic acid oil and lignans, and it is suggested that the consumption of flaxseed may contribute to the prevention of certain chronic diseases such as many types of cancer, diabetes, cardiovascular diseases and cerebrovascular stroke. Here, we demonstrate a new method for comprehensive FS lipidome profiling with the use of LC–Q-TOF-MS and dispersive micro-solid-phase extraction....
-
A negative effect of carbon phase on specific capacity of electrode material consisted of nanosized bismuth vanadate embedded in carbonaceous matrix
PublicationLithium-ion batteries (LIBs) are widely used all over the world. The LIBs belong to a renewable energy source and energy storage devices. The increase in energy demand causes that new materials of higher energy and higher power densities are still under investigation. Herein, we compare electrochemical properties of bismuth vanadate (BiVO4) embedded and not embedded into carbonaceous matrix as an anode material along with structural...
-
Framework for extracting rails and setting-out railway line axis based on UAV photogrammetric measurements
PublicationTechnical diagnostics enables assessing the current technical condition of a railway line and adjacent infrastructure, and forecasting its changes over a specific time horizon. One of its elements is the periodic monitoring of rail position and their geometry. This article presents a new framework for the setting-out of a railway track axis. The process presented in the manuscript is based on the specific filtration and extraction...
-
Method of managing drill cuttings from shale gas formations
PublicationProposed management method of drill cuttings involves recycling for the expanded clay production. A theoretical presentation of the possibility, choosing planning path based on similarity between the materials used in the manufacture of expanded clay and oily cuttings. Application for the main stages of manufacture of expanded clay production of drill cuttings from shale gas extraction. Introduced into circulation solid waste partly...
-
Determination of Pesticide Residues in Honeybees using Modified QUEChERS Sample Work-Up and Liquid Chromatography-Tandem Mass Spectrometry
PublicationIncreasing emissions of chemical compounds to the environment, especially of pesticides, is one of factors that may explain present honeybee colony losses. In this work, an analytical method employing liquid chromatography-tandem mass spectrometry (LC-MS/MS) was optimized for the simultaneous screening of 19 pesticides which have not been yet determined in honeybee samples from northern Poland (Pomerania). The sample preparation,...
-
The use of a one-step PCR method for the identification of Microsporum canis and Trichophyton mentagrophytes infection of pets
PublicationIntroduction: Dermatophytes are a closely related group of keratinophilic fungi. They encompass important etiological agents of superficial fungal infections. These fungi are able to invade keratinized tissues of humans and animals, causing dermatophytosis (ringworm) of hair, nails or skin. The aim: Traditional diagnostics of ringworm is based on morphological identification of cultured fungi and is time-consuming. Materials and methods:...
-
Elimination of excretion of ibuprofen and its metabolites in horses
PublicationAnalytical procedure based on application of gas chromatography-mass spectrometry (GC-MS) at the step of detection, identification and quantitation of ibuprofen (IBU) and detection of its metabolites – 1-hydroxyibuprofen (1-OH IBU) and carboxyibuprofen (CBX IBU) in horse urine by selected ion monitoring mode after sample preparation covering extraction at pH 3-4 and methylation has been used. The ions at m/z 161, 220 (methylated...
-
Decisional DNA Based Conceptual Framework for Smart Manufacturing
PublicationThis paper presents the conceptual framework for systematic knowledge representation, storage and reuse of manufacturing information in a production scenario. This knowledge structure is designed for three levels in a manufacturing set up viz. first at the engineering objects level, second at process and finally at factory level. Virtual engineering object (VEO) deals with knowledge at the individual object/component/machine level...
-
Isolation and characterization of Acid Soluble Collagen from the Skin of African Catfish (Clarias gariepinus), Salmon (Salmo salar) and Baltic cod (Gadus morhua)
PublicationAcid-soluble collagen (ASC) from the fish skin of African catfish (Clarias gariepinus), Salmon (Salmo salar) and Baltic cod (Gadus morhua) was extracted and characterized. The ASC extraction yield was 75%, 73% and 68%, respectively. The denaturation and melting temperatures of African catfish ASC (29.3°C and 100.0°C) were significantly higher than ASC of Salmon and Baltic cod (20.6°C and 90.5°C; 15.2°C and 86.7°C, respectively), assessed...
-
Features extraction from the electrocatalytic gas sensor responses
PublicationOne of the types of gas sensors used for detection and identification of toxic-air pollutant is an electrocatalytic gas sensor. The electrocatalytic sensors are working in cyclic voltammetry mode, enable detection of various gases. Their response are in the form of I-V curves which contain information about the type and the concentration of measured volatile compound. However,...
-
Performance Analysis of Developed Multimodal Biometric Identity Verification System
PublicationThe bank client identity verification system developed in the course of the IDENT project is presented. The total number of five biometric modalities including: dynamic handwritten signature proofing, voice recognition, face image verification, face contour extraction and hand blood vessels distribution comparison have been developed and studied. The experimental data were acquired employing multiple biometric sensors installed...
-
Numerical analysis of chip removing system operation in circular sawing machine using CFD software
PublicationPaper presents the analysis of the results of numerical simulations of the air flow process of wood chips removing system in the circular sawing machine. The attention is focused on the upper cover and bottom shelter of the chip removing system. Within the framework of the work a systematic numerical modeling of the air flow distribution in the cover and shelter during operation of the selected rotational speed of saw blade with...
-
Classifying type of vehicles on the basis of data extracted from audio signal characteristics
PublicationThe aim of this study is to find and optimize a feature vector for an automatic recognition of the type of vehicles, extracted form an audio signal. First, the influence of weather-based conditions of road surface on spectral characteristic of the audio signal recorded from a passing vehicle in close proximity to the road is discussed. Next, parameterization of the recorded audio signal is performed. For that purpose, the MIRtoolbox,...
-
Determination of thiocyanate as a biomarker of tobacco smoke constituents in selected biological materials of human origin
Publicationn order to protect human health, it is necessary to biomonitor toxic substances originating from tobacco smoke in biological materials sampled from persons with different exposures to tobacco smoke constituents. Thiocyanate anion is a biomarker of exposure to tobacco smoke components which is characterized by a relatively long half‐life in the human body, i.e. 6 days. In this work, we present the results of thiocyanate determinations...
-
Recent advances in assessing xenobiotics migrating from packaging material – A review
PublicationMigration of potentially toxic xenobiotics and their transformation products from packaging materials needs continuous monitoring efforts. This task requires utilizing both instrumental and biological methods as more and more novel materials reach market every year to serve consumers and reduce production costs. Unfortunately, these materials very often sneak past our legal regulations on their composition and emission of contaminants...
-
Greenness assessment of analytical methods used for antibiotic residues determination in food samples
PublicationFood of animal origin plays an important role in ensuring a healthy and sustainable human diet. However, residues of pharmaceuticals, especially antibiotics, can be the cause of many health problems. To protect consumers and improve food quality, analytical methods used to determine contaminants should be simple, selective, and have high throughput and low detection limits. Recently, greenness metric tools have proven useful in...
-
Analysis of the Capability of Deep Learning Algorithms for EEG-based Brain-Computer Interface Implementation
PublicationMachine learning models have received significant attention for their exceptional performance in classifying electroencephalography (EEG) data. They have proven to be highly effective in extracting intricate patterns and features from the raw signal data, thereby contributing to their success in EEG classification tasks. In this study, we explore the possibilities of utilizing contemporary machine learning algorithms in decoding...
-
Driver’s Condition Detection System Using Multimodal Imaging and Machine Learning Algorithms
PublicationTo this day, driver fatigue remains one of the most significant causes of road accidents. In this paper, a novel way of detecting and monitoring a driver’s physical state has been proposed. The goal of the system was to make use of multimodal imaging from RGB and thermal cameras working simultaneously to monitor the driver’s current condition. A custom dataset was created consisting of thermal and RGB video samples. Acquired data...
-
Determination of nine high-intensity sweeteners in various foods by high-performance liquid chromatography with mass spectrometric detection
PublicationAn analytical procedure involving solid-phase extraction (SPE) and high-performance liquid chromatography-mass spectrometry has been developed for the determination of nine high-intensity sweeteners authorised in the EU; acesulfame-K (ACS-K), aspartame (ASP), alitame (ALI), cyclamate (CYC), dulcin (DUL), neohesperidin dihydrochalcone (NHDC), neotame (NEO), saccharin (SAC) and sucralose (SCL) in a variety of food samples (i.e. beverages,...
-
Rapid and simple multi-analyte LC–MS/MS method for the determination of benzodiazepines and Z-hypnotic drugs in blood samples: Development, validation and application based on three years of toxicological analyses
PublicationBenzodiazepines (BZDs) and Z-drugs have been particularly important treatments for sleeping and anxiety disorders for many years. However, recently, a number of new benzodiazepines (named designer benzodiazepines, DBZDs) were synthesised, but some of them have never been used in the clinic; they reached the black drug market as new psychoactive substances and are used for recreational purposes. The abuse of these substances has...
-
Determination of Butyltin Species in Sea Water Samples Using Solid Phase Extraction Followed by Liquid Chromatography - Tandem Mass Spectrometry
PublicationReverse phase liquid chromatography (RP-HPLC)-electrospray ionization-tandem mass spectrometry (ESI-MS-MS) was evaluated for the analysis of TBT using solid phase extraction as sample preparation method. TBT was extracted from acidified water samples (spiked with tripropyltin as internal standard) using reversed phase polymeric Strata-X cartridges. Analytes were eluted from cartridges using acetonitrile-water mixture and the volume...
-
Analysis of the harmonic structure of the vowel /a/ taking into account the age and gender of the speaker
PublicationSound waves are disturbances propagating through an elastic medium that, upon reaching the ear, elicit auditory sensations. Sounds generated by the surroundings can be captured by a transducer (microphone), which transforms them into an electrical signal. The signal from the microphone is then transmitted to a computer, where software allows for the extraction and analysis of individual tones. This process enables the description...
-
Decisional DNA (DDNA) Based Machine Monitoring and Total Productive Maintenance in Industry 4.0 Framework
PublicationThe entire manufacturing spectrum is transforming with the advent of Industry 4.0. The features of Set of Experience Knowledge Structure (SOEKS) and Decisional DNA (DDNA) were utilized for developing Virtual Engineering Objects (VEO), Virtual Engineering Process (VEP) and Virtual Engineering Factory (VEF), which in turn facilitate the creation of smart factories. In this study, DDNA based Machine Monitoring for Total Maintenance...
-
The Hough transform in the classification process of inland ships
PublicationThis article presents an analysis of the possibilities of using image processing methods for feature extraction that allows kNN classification based on a ship’s image delivered from an on-water video surveillance system. The subject of the analysis is the Hough transform which enables the detection of straight lines in an image. The recognized straight lines and the information about them serve as features in the classification...
-
Application and optimization of headspace solid-phase microextraction (HS-SPME) coupled with gas chromatography - flame-ionization detector (GC-FID) to determine products of the petroleum industry in aqueous samples
PublicationA simple and solvent-free analytical method has been optimized for the determination of hydrocarbons (C6 - C20) from products of the petroleum industry in aqueous samples. Extraction and analysis was carried out using headspace solid-phase microextraction (HS-SPME) and gas chromatography coupled with flame-ionization detector (GC-FID). A ZB-5 capillary column (30 m × 0.25 mm inner diameter, 0.25 µm film thickness) was used for...
-
Development of different methods for drugs and psychoactive substances extraction from hair samples and their identification based on HPLC-ESI-QTOF analysis
PublicationOver the past decade, the use of non-controlled designer drugs and drug of abuse has rapidly increased. Hair, as a human matrix, enables detection of drugs incorporated into its structure. Studies of presence and identification of drug metabolites in human hair samples has been performed using liquid chromatography electrospray ionization quadrupole time of flight mass spectrometry (HPLC-ESI-QTOF-MS) with steady alternation of...