Filters
total: 835
filtered: 768
Search results for: REACHABILITY PLOT
-
A device for measuring heat flux on a rocket skin surface
PublicationA novel method for measuring heat flux on a surface is presented. It is an extensive upgrade of currently known heat flux sensors used mostly in civil engineering. As the thermal environment of launchers, especially sounding rocket can have an enormous negative effect on payload, careful considerations have to be taken in the process of preparing insulation. Usually, thermal data provided by the launch vehicle manufacturer is limited...
-
Signature of Oxide-Ion Conduction in Alkaline-Earth-Metal-Doped Y3GaO6
PublicationWe have studied alkaline-earth-metal-doped Y3GaO6 as a new family of oxide-ion conductor. Solid solutions of Y3GaO6 and 2% −Ca2+-, −Sr2+-, and −Ba2+-doped Y3GaO6, i.e., Y(3−0.06)M0.06GaO6−δ (M = Ca2+, Sr2+, and Ba2+), were prepared via a conventional solid-state reaction route. X-ray Rietveld refined diffractograms of all the compositions showed the formation of an orthorhombic structure having the Cmc21 space group. Scanning electron...
-
Współczesny Word of Mouth – dylematy pojęciowe
PublicationPrzekaz ustny (Word of Mouth) jest obecnie jednym z najważniejszych czynników, które mają wpływ na klientów podczas podejmowania decyzji o zakupie, a także na zarządzanie ich zachowaniami w procesie dokonywania zakupów. Szczególne znaczenie ma on w przypadku dóbr niematerialnych, o wysokim ryzyku zakupu, jakim są usługi. Rosnąca liczba jego nowych form i coraz bardziej skomplikowana natura, związana głównie z umieszczaniem opinii...
-
Simple Computational Methods in Predicting Limit Load of High-Strength Cold-Formed Sections due to Local Buckling: A Case Study
PublicationCold-formed thin-walled sections are prone to local buckling caused by residual stresses, geometrical imperfections and inconsistency of material properties. We present a real case of buckling failure and conduct a numerical and experimental study aimed to identify methods capable of predicting such failures. It is important because designers of structures are getting more FEA-oriented and tend to avoid lengthy procedures of cold-formed...
-
Smart Document-Centric Processing of Human Oriented Information Flows
PublicationUsually people prefer to focus on creative rather than repetitive and schematic work patterns. Still, they must spend a lot of time complying with the procedures, selecting the information they receive and repeatedly restoring the previous state of work. This paper proposes the Mobile INteractive Document architecture (MIND) - a document-centric uniform interface to provide both effective communication of content and coordination...
-
The influence of the welding environment on the properties of Tekken joints made from S355J2C+N steel
PublicationThere are three main methods of underwater welding: dry, wet and intermediate between them, by using the local dry chamber. Due to low costs, the most common method is the wet welding with the use of covered electrodes. Water as a welding environment carries out a lot of problems. The first is limited visibility and instability of the welding arc. The biggest problem during underwater welding is high susceptibility to cold cracking,...
-
Smart Services supporting Drivers in Effective Cars Parking
PublicationThe paper shows how to design and implement intelligent, service oriented systems for management of free places in distributed car parks. The idea of SOA technology is widely used. It is assumed that a state of every car park is automatically determined by a special electronic infrastructure including IoT solutions. The information received from such an infrastructure is sent to the main management system, which processes it and,...
-
Determination of pesticide residues in fruits and vegetables using QuEChERS sample preparation method
PublicationThe intensive development of agriculture means that more and more toxic organic and inorganic compounds are entering the environment. Because of their widespread use, environmental stability, selective toxicity and bioaccumulative capability, pesticides belong to the most hazardous substances contaminating the environment. They are particularly dangerous in fruits and vegetables, because they are one of the reasons why people are...
-
An analysis of domain-based ship collision risk parameters
PublicationAccording to a lot of contemporary research on ship collision avoidance the classic approach parameters – distance at closest point of approach (DCPA) and time to the closest point of approach (TCPA) – are not sufficient for estimating ship collision risk and for planning evasive manoeuvres. Consequently new measures are introduced, often utilizing the concept of a ship domain. Their drawback, up to this point, was the lack of...
-
Potential applications of crude glycerol in polymer technology–Current state and perspectives
PublicationThe increasing use of bio-based fuels and fuel additives, among them biodiesel, causes significant surplus of crude glycerol on the market which creates new challenges in terms of its sustainable utilization. A lot of ways for the incorporation of this by-product into different branches of industry requires purification by expensive and complicated processes. Therefore, researchers are seeking for applications of untreated crude...
-
Study on effective front region thickness of PCM in thermal energy storage using a novel semi-theoretical model
PublicationThermal energy storage in mobile applications, particularly battery of electric vehicles, is currently gaining a lot of importance. In this paper, a semi-theoretical time-dependent mathematical model of the phase change in a double shell thermal energy storage module has been developed where the inner tube is a heat exchange surface. An effective front region thickness for the melting and solidification process has been studied....
-
Numerical Investigation on Dynamic Performance of a Multi-storey Steel Structure Model and Comparison with Experimental Results
PublicationShaking table testing is the most commonly adopted method to simulate earthquake forces. This approach allows us to analyze the dynamic performance and provides a valuable insight into the dynamics of building structures, which helps to improve their future safety and reliability. The present study aims to conduct a numerical evaluation of dynamic response of a multi-storey steel structure model, which was previously examined during...
-
Assessing Highway Travel Time Reliability using Probe Vehicle Data
PublicationProbe vehicle data (also known as “floating car data”) can be used to analyze travel time reliability of an existing road corridor in order to determine where, when, and how often traffic congestion occurs at particular road segments. The aim of the study is to find the best reliability performance measures for assessing congestion frequency and severity based on probe data. Pilot surveys conducted on A2 motorway in Poland confirm...
-
Understanding the origin of high corrosion inhibition efficiency of bee products towards aluminium alloys in alkaline environments
PublicationVarious bee products were found to be efficient corrosion inhibitors of aluminium in different environments. In particular, bee pollen was found to be highly effective in alkaline electrolytes, yet its highly complex composition and possible synergistic interactions hinder determination of the compounds acting as active corrosion inhibitors. The main purpose of the following work is to investigate the effect of solvents used for...
-
A comprehensive review of open data platforms, prevalent technologies, and functionalities
PublicationOpen data can play a crucial role in different sectors of the world,such as government, science, research, technology, culture, andfinance. There are several necessary measures that every organiza-tion needs to consider before opening data. There are three majorsteps to opening the data: (1) Preparation stage, and (2) launchingthe open data initiative (3) In this case, the feedback mechanismstudy such as expand and sustain stage,...
-
Desirability-based optimization of dual-fuel diesel engine using acetylene as an alternative fuel
Publicationhe study examined the dual-fuel engine performance employing acetylene gas as primary fuel and diesel as pilot fuel. The engine's operational parameters were adjusted using the Box-Behnken design, and the results were recorded. The best operating settings were yielded as 81.25 % engine load, 4.48 lpm acetylene gas flow rate and the compression ratio were 18. At this optimized setting the BTE was 27.1 % and the engine emitted 360...
-
Antimicrobial resistance of fecal indicators in disinfected wastewater
PublicationThe main objective of the study was to assess the potential of three systems (UV irradiation, ozonation, and micro/ultrafiltration) operated in a pilot scale in removal of antimicrobial-resistant fecal bacteria from secondary effluent of the local wastewater treatment plant (700,000 population equivalent). The effectiveness of the processes was analysed using the removal ratio of fecal indicators (Escherichia coli and Enterococcus...
-
Numerical investigation on dynamic performance of a multi-storey steel structure model and comparison with experimental results
PublicationShaking table testing is the most commonly adopted method to simulate earthquake forces. This approach allows us to analyze the dynamic performance and provides a valuable insight into the dynamics of building structures, which helps to improve their future safety and reliability. The present study aims to conduct a numerical evaluation of dynamic response of a multi-storey steel structure model, which was previously examined during...
-
Assessment of dynamic characteristics of thin cylindrical sandwich panels with magnetorheological core
PublicationBased on the equivalent single-layer linear theory for laminated shells, free and forced vibrations of thin cylindrical sandwich panels with magnetorheological core are studied. Five variants of available magnetorheological elastomers differing in their composition and physical properties are considered for smart viscoelastic core. Coupled differential equations in terms of displacements based on the generalized kinematic hypotheses...
-
Results of the “DPDT-Auger” Research Project on Screw Displacement Piles
PublicationThe main objective of the “DPDT-Auger” research project was to test the prototype DPDT auger for forming screw displacement piles in the ground (patented in Poland in 2020). An additional aim was to develop design methods and rules for the making of such piles. The augers and piles were first tested on a model scale, and then more extensively in the real scale on experimental field plots. The results found the overall functionality...
-
Microfluidically Frequency-Reconfigurable Self-Quadruplexing Antenna Based on Substrate Integrated Square-Cavity
PublicationIn this article, a novel concept of self-quadruplexing tunable antenna (SQTA) enabled by microfluidic channels is investigated. The operating channels are either filled with air or dielectric liquids to enable frequency tunability. The proposed SQTA is implemented on the substrate-integrated square-cavity (SISC). A swastika-shaped slot is milled on the top-surface of the SISC to create four quarter-mode resonators. The resonators...
-
Borrelia burgdorferi BmpA-BBK32 and BmpA-BBA64: New Recombinant Chimeric Proteins with Potential Diagnostic Value
PublicationCurrently, the diagnosis of Lyme disease is based mostly on two-tiered serologic testing. In the new generation of immunoenzymatic assays, antigens comprise whole-cell lysates of members of the Borrelia burgdorferi sensu lato (s.l.) species complex, with the addition of selected recombinant proteins. Due to the high diversity of members of the B. burgdorferi s.l. genospecies and the low degree of conservation among the amino acid...
-
Fabrication of wormhole-like YSZ and Ni-YSZ by the novel soft-hard template CTAB/NaCl-assisted route. Suppressing Ni coalescence in SOFC
PublicationA novel one-pot synthesis route leading to the formation of a wormhole-like structure was developed for the successful fabrication of porous YSZ and Ni-YSZ systems. This method involved co-precipitation in the presence of the micelle-forming agents CTAB/Pluronic P123 and crystallising NaCl. The obtained skeletons were mechanically stable and presented almost 50% uniform, open porosity without using any additional pore-formers....
-
Experimental determination of basic mechanical properties of elastomeric polymer
PublicationThere are a lot of different methods of repairing and reinforcing damaged structures, but when it comes to historical buildings and other cultural heritage objects, it is as much about mechanical safety as the aesthetical aspects. Recently, a new and innovative method of repairing damaged structures by filling the cracks with a specially prepared polymer mass has been proposed. This new and innovative technique, known as the Flexible...
-
Phytoremediation of heavy metals by white cabbage
PublicationPhytoremediation is regarded as the cheapest and environmentally most friendly technology for cleaning up soil. The most widespread and most profitable technique is phytoextraction, used mainly for removing heavy metals and radioactive elements from thesoil. Over 400 plant species have been identified as natural metal hyperaccumulators representing about 0.2 % of all angiosperms. Unfortunately, most of these plants are characterised...
-
Abstract class method use on common characteristics of UE regions for better road safety management in these regions.
PublicationRoad Safety is the significant problem requiring still a lot of attention. Despite lots of actions for road fatalities reduction, in many countries or regions situation doesn't improve as good as in the other cases. Even if these actions are very similar. It is so difficult issue, that the answer why is that happens hasn't been found yet. In this paper authors focused on the road network of European regions, classified as NUTS...
-
„Eulerian – Eulerian” versus ,,Eulerian –Lagrangean” models of condensation
PublicationLiquid phase in the flowing vapor through stages of the steam turbine is the cause of a lot of failures. Nowadays, due to work of steam turbines at partial load, process of homogeneous and heterogeneous condensation still is current. The formation of drops of condensate under conditions other than nominal operation of turbine is a process still unknown. Engineers and designers involved in the development of power station machines...
-
A method of selecting light sources from night satellite scenes
PublicationSatellite images carries a lot of data. Very sophisticated methods of analyses may reveal very complicated nature of the observed objects. In case of night images, lights play the role of information sources. In this paper we would like to present results of the research aimed to describe light sources from satellite night images by providing description of their luminosity. The authors point source imaging data from the satellite...
-
Extraction with environmentally friendly solvents
PublicationThe ever-increasing demand for determining compounds at low concentration levels in complex matrices requires a preliminary step of analytes isolation/enrichment in order to employ a detection technique characterized by high sensitivity at low LOQ. Sample preparation is considered as crucial part of analytical procedures. Previously the parameter of “greenness” is as important as selectivity in order to avoid using harmful organic...
-
Synthesis of Combretastatin A-4 Analogs and their Biological Activities
PublicationCombretastatin A-4 (CA-4) is a natural product, which consists of two phenyl rings, linked by an ethylene bridge. CA-4, inhibitor of polymerization of tubulin to microtubules, possesses a strong antitumor and anti-vascular properties both in vitro and in vivo. Previous studies showed that disodium phosphate salt of CA-4, a water-soluble prodrug is well tolerated at therapeutically useful doses. However, it should be noted that...
-
Effect of Different Bromine Sources on the Dual Cation Mixed Halide Perovskite Solar Cells
PublicationRecent research has shown that perovskite solar cells with a mixed dual A-cation have much better structural stability without loss of efficiency than single cation devices. Mixed cation perovskites create a lot of questions about the salts being used for the formation of the best-quality layer. Here, we have investigated three sources of bromide in the perovskite absorption layer, using lead bromide (PbBr2), formamidinium bromide...
-
Study on Microstructure-Property Relationship of Inconel 617 Alloy/304L SS Steel Dissimilar Welds Joint
PublicationWelding of Inconel 617 (IN617) alloy and austenitic 304L SS steel has been attempted using the autogenous Laser Beam Welding (LBW) process. Characterization of dissimilar weldments was performed on either side of the fusion boundaries. The metallographic results showed that the inhomogeneous microstructure formation for weld metal contained columnar and cellular dendrites near the interface, whilst the columnar, cellular and equiaxed...
-
Novel monovalent and multivalent recombinant proteins of Borrelia burgdorferi sensu lato with potential diagnostic value – construction and biotechnological production
PublicationThe diverse antigenic structure of Borrelia burgdorferi sensu lato (s.l.) and the low degree of protein sequence conservation between genospecies causes many limitations in serodiagnosis of Lyme disease (LD). Using expression systems based on Escherichia coli, five monovalent B. burgdorferi s.l. recombinant proteins were produced. i.e., BB0108, BB0126, BB0298, BB0323, BB0689 (each in three variants derived from Borrelia afzelii,...
-
Efficiency of landfill leachate treatment in a MBR/UF system combined with NF, with a special focus on phthalates and bisphenol A removal
PublicationIn this study, a pilot-scale membrane bioreactor (MBR) was operated at a municipal solid waste plant (MSWP) to treat a mixture of landfill leachates (LLs) obtained from modern (MP-LLs) and previous (PP-LLs) waste cells. The MBR unit combined anoxic and aerobic zones with external ultra- and nanofiltration (MBR/UF and MBR/UF/NF, respectively). In addition to the removal of macropollutants, special attention was given to phthalates...
-
Structural analysis and physico-chemical characterization of mononuclear manganese(II) and polynuclear copper(II) complexes with pyridine-based alcohol
PublicationTwo novel manganese(II) and copper(II) complexes, mononuclear [Mn(H2O)2(2-(CH2)2OHpy)2](NO3)2 (1) and polynuclear [Cu(SO4)(2-(CH2)2OHpy)2]n (2), based on 2-(hydroxyethyl)pyridine (2-(CH2)2OHpy) were synthesised and fully characterised using X-ray structure analysis as well as spectroscopic, magnetic and thermal methods. Both central metal ions Mn(1) and Cu(1) are coordinated by two N,O-donor 2-(CH2)2OHpy ligands and possess an...
-
Rapid Re-Design and Bandwidth/Size Trade-Offs for Compact Wideband Circular Polarization Antennas Using Inverse Surrogates and Fast EM-Based Parameter Tuning
PublicationDesign of compact wideband circularly polarized (CP) antennas is challenging due to the necessity of simultaneous handling of several characteristics (reflection, axial ratio, gain) while maintaining a small size of the structure. Antenna re-design for various operating bands is clearly more difficult yet practically important because intentional reduction of the bandwidth (e.g., by moving the lower edge of the operating band up...
-
Shielded HMSIW-based frequency-tunable self-quadruplexing antenna using different solid/liquid dielectrics
PublicationThis article proposes a frequency-tunable self-quadruplexing antenna based on a shielded half-mode substrate integrated waveguide (S-HMSIW). In order to reduce the size of the HMSIW cavity resonator and to obtain quad-band characteristics, a modied E-shaped slot is engraved on the top of the metal. The experimental validation is carried out after analyzing the data using a circuit model. Flexibility of each resonant frequency is...
-
Antibody Cross-Reactivity in Serodiagnosis of Lyme Disease
PublicationLyme disease is a tick-borne disease caused by spirochetes belonging to the Borrelia burgdorferi sensu lato complex. The disease is characterized by a varied course; therefore, the basis for diagnosis is laboratory methods. Currently, a two-tiered serological test is recommended, using an ELISA as a screening test and a Western blot as a confirmatory test. This approach was introduced due to the relatively high number of false-positive...
-
Effect of Vascular Lumen Reduction on the Performance and Energy Consumption of an Innovative Implantable LVAD
PublicationThis paper presents the results of a study on the effect of vascular lumen reduction on the performance of an innovative implantable LVAD (left ventricular assist device). It details the pressures in the individual cardiac chambers as a function of device frequency. In addition, mass flow rates and energy consumption of the device are examined, varying with lumen reduction and operating frequency. While the lumen reduction of the...
-
Performance-driven yield optimization of high-frequency structures by kriging surrogates
PublicationUncertainty quantification is an important aspect of engineering design, as manufacturing toler-ances may affect the characteristics of the structure. Therefore, quantification of these effects is in-dispensable for adequate assessment of the design quality. Toward this end, statistical analysis is performed, for reliability reasons, using full-wave electromagnetic (EM) simulations. Still, the computational expenditures associated...
-
Transforming a Traditional, Family-Run Car Dealership into a Digital-Era Modern Service Provider
PublicationThe automotive industry today faces multiple challenges. The automotive market is characterised by frequent changes and technological developments in comfort and safety of travel by all types of vehicles. The division between traditional and modern services is related to their susceptibility to technological progress. We should differentiate between two types of technology: technology used directly in vehicles and technology utilized...
-
Daylight evaluation for multi-family housing in Poland
PublicationThis PhD dissertation focuses on methods of daylight appraisal useful in the design of the contemporary multifamily housing. The theoretical part of the thesis offers a review of daylight indicators, evaluations methods and tools within the built environment. It covers a review of daylight recommendations found in building standards and other normative documents affecting the design of the residential spaces. A pilot work survey...
-
Strategie miast powiatowych na obszarze peryferyjnym województwa pomorskiego.
PublicationArtykuł nawiązuje do badań problemów rozwoju obszarów peryferyjnych (czyli poza obszarami metropolitalnymi) prowadzonych przez autora od 2009 r. Postawił on hipotezę, że rozwój miast powiatowych może zaktywizować gospodarczo ich otoczenie. W 2013 r. zbadał czynniki rozwojowe wskazane w planach strategicznych miast powiatowych na obszarze peryferyjnym województwa pomorskiego, obecnie - strategie tych miast w części dotyczącej rozwoju...
-
Impact of low-temperature sintering on the Fe-based amorphous coatings
PublicationBulk metallic glasses (BMGs) have gained a lot of attention in recent years due to their outstanding properties such as high hardness and excellent wear and corrosion resistance. However, they are restricted in industrial applications due to their extreme brittleness. Iron based amorphous coatings from BMGs are the best solution to use them by overcoming the problem of extreme brittleness. The coatings can be sprayed by various...
-
Behaviour of Asymmetric Structure with Base Isolation Made of Polymeric Bearings
PublicationEarthquake-induced ground motions are the most severe and unpredictable threats to the structures all around the world. Seismic excitations cause a lot of damage in a wide variety of ways, leaving thousands of casualties in their wake. Due to randomness of earthquake occurrence, lack of visible causes and their power of destructiveness, structural engineers need to develop new technical solutions and protection systems against...
-
An approach to improve the time efficiency of disjoint paths calculation
PublicationFailures of network elements can be appropriately dealt with by utilization of alternate disjoint paths to provide redirection of flows affected by failures of the respective working paths. Known approaches can be broadly divided by decision on backup paths installation into proactive and reactive mechanisms, as well as based on the scope of recovery actions into local and global rerouting. There are several important scenarios...
-
Novel Coplanar-Strip-Based Excitation Technique for Design of Broadband Circularly Polarization Antennas with Wide 3-dB Axial Ratio Beamwidth
PublicationIn this paper, a novel excitation technique for design of a single-point-fed compact low-profile wide-slot antennas with broadband circular polarization (CP) and wide 3 dB axial ratio (AR) beamwidth is presented. Two inverted L-shape parasitic strips placed coplanar to the microstrip line of an asymmetric CPW, and a horizontal strip that protrudes from the vertical edge of the backside ground plane of the substrate are used for...
-
Smart skills and education in a future economy
PublicationWhether the role of education is to prepare people for employment or to have meaningful lives in general, it will identify and develop skills and competencies, as well as vocational and personal attributes. Skills, such as critical thinking, novel ideation, and complex cognitive and social skills, are areas where humans continue to outperform smart machines. The purpose of this article is to review the skills and competencies that...
-
Biocomposites from recycled resources as candidates for laboratory reference material to validate analytical tools used in organic compounds emissions investigation
PublicationA suitably chosen reference material should meet specific criteria like representing one of the compound classes most commonly occurring in indoor materials as well as having optimal long-term stability during storage and transport to its destination point and having a compact size. The described interdisciplinary pilot research was aimed to develop and characterize a polymer-based candidate for the laboratory reference material...
-
High gain/bandwidth off‑chip antenna loaded with metamaterial unit‑cell impedance matching circuit for sub‑terahertz near‑field electronic systems
PublicationAn innovative off-chip antenna (OCA) is presented that exhibits high gain and efficiency performance at the terahertz (THz) band and has a wide operational bandwidth. The proposed OCA is implemented on stacked silicon layers and consists of an open circuit meandering line. It is shown that by loading the antenna with an array of subwavelength circular dielectric slots and terminating it with a metamaterial unit cell, its impedance...