Filters
total: 865
-
Catalog
Search results for: MEPS
-
Assessing ecotoxicity, synergic and antagonistic actions of commonly used components of polymerization mixture in molecularly imprinted polymers preparation process
PublicationIncreasingly, the challenge is the optimal process of developing a suitable MIP-type sorptive material (taking into account its final form and application area), which is mainly related to the efficiency/effectiveness of the polymerization process. The lack of reaction or its low efficiency generates additional waste and puts it into the environmental cycle. The main aim of the performed research was the estimation of ecotoxicity,...
-
Evaluation of organic coatings condition with AFM-based method
PublicationThe paper presents an atomic force microscopy (AFM)-based approach to evaluation of local protective properties of organic coatings. Apart from topography, it provides local ac and dc characteristics of examined coating. The method consists in application of ac voltage perturbation signal between conductive AFM tip and coated metal substrate. The resulting current is used to determine local impedance characteristics. Both impedance...
-
Time travel without paradoxes: Ring resonator as a universal paradigm for looped quantum evolutions
PublicationA ring resonator involves a scattering process where a part of the output is fed again into the input. The same formal structure is encountered in the problem of time travel in a neighborhood of a closed timelike curve (CTC). We know how to describe quantum optics of ring resonators, and the resulting description agrees with experiment. We can apply the same formal strategy to any looped quantum evolution, in particular to the...
-
Point cloud in archaeological and historical survey
PublicationIn the last decade the potential of using the point clouds in archaeological research has been noted. Therefore, a number of guidelines concerning aspects of data acquisition (resolution and format) were developed. They also included the way of searching the imaged area to identify archaeological and historical cultural heritage sites. The purpose of this research was to analyze the point cloud for selected woodland survey. Forest...
-
THE PROBLEM OF AIRFLOW AROUND BUILDINGS CLUSTERS IN DIFFERENT CONFIGURATIONS
PublicationIn the paper, the authors discuss the construction of a model of an exemplary urban layout. Numerical simulation has been performed by means of a commercial software Fluent using two different turbulence models: the popular k-ε realizable one, and the Reynolds Stress Model (RSM), which is still being developed. The former is a 2-equations model, while the latter – is a RSM model – that consists of 7 equations. The studies have...
-
Impedance evaluation of coatings from biobased material
PublicationThe authors propose a modification of sodium caseinate edible coating for foodstuff protection. The aim was to improve the film’s barrier properties. It was achieved by the addition of propolis, which is a natural, environmentally friendly product known from its intrinsic sealing action. In the next step, propolis-admixed sodium caseinate films were exposed to elevated temperature for 10 min. This approach was meant to improve...
-
Performance measurements and optimization of visualization of routes traveled in the distributed dispatcher and teleinformation system for visualization of multimedia data for the Border Guard
PublicationMonitoring of country maritime border is an important task of the Border Guard. This activity can be enhanced with the use of the technology enabling gathering information from distributed sources, processing of that information and its visualization. The system presented in the paper is an advancement of the previously developed distributed map data exchange system. The added functionality allows to supplement the map data with...
-
Multi-agent large-scale parallel crowd simulation with NVRAM-based distributed cache
PublicationThis paper presents the architecture, main components and performance results for a parallel and modu-lar agent-based environment aimed at crowd simulation. The environment allows to simulate thousandsor more agents on maps of square kilometers or more, features a modular design and incorporates non-volatile RAM (NVRAM) with a fail-safe mode that can be activated to allow to continue computationsfrom a recently analyzed state in...
-
Wave Frequency Effects on Damage Imaging in Adhesive Joints Using Lamb Waves and RMS
PublicationStructural adhesive joints have numerous applications in many fields of industry. The gradual deterioration of adhesive material over time causes a possibility of unexpected failure and the need for non-destructive testing of existing joints. The Lamb wave propagation method is one of the most promising techniques for the damage identification of such connections. The aim of this study was experimental and numerical research on...
-
Two-photon microperimetry with picosecond pulses
PublicationTwo-photon vision is a phenomenon associated with the perception of short pulsesof near-infrared radiation (900-1200 nm) as a visible light. It is caused by the nonlinear processof two-photon absorption by visual pigments. Here we present results showing the influence ofpulse duration and repetition rate of short pulsed lasers on the visual threshold. We comparedtwo-photon sensitivity maps of the retina obtained for subjects with...
-
Application of multivariate statistics in assessment of green analytical chemistry parameters of analytical methodologies
PublicationThe study offers a multivariate statistical analysis of a dataset, including the major metrological, “greenness” and methodological parameters of 43 analytical methodologies applied for aldrin determination (a frequently analyzed organic compound) in water samples. The variables (parameters) chosen were as follows: metrological (LOD, recovery, RSD), describing the “greenness” (amount of the solvent used, amount of waste generated)...
-
Numerical analysis of pile installation effects in cohesive soils
PublicationIn this thesis the empirical equation for radial effective stress calculation after displacement pile installation and following consolidation phase has been proposed. The equation is based on the numerical studies performed with Updated Lagrangian, Arbitrary Lagrangian-Eulerian and Coupled Eulerian-Lagrangian formulations as well as the calibration procedure with database containing world-wide 30 pile static loading tests in cohesive...
-
Dynamic analysis of the railway bridge span under moving loads
PublicationThe first part of this paper provides a review of the state of knowledge of the dynamic behaviour of railway bridges under moving loads. Particular attention is paid to developments in modelling railway bridge loading and dynamic vehicle-span (structure) interaction. The most important aspects determining the advancements in this area of knowledge are identified. The contemporary techniques for defining bridge span finite element...
-
Assessment of damage due to earthquake-induced pounding between the main building and the stairway tower
PublicationRaporty po trzęsieniach ziemi pokazują, iż występujące podczas wstrząsów sejsmicznych zderzenia pomiędzy sąsiednimi konstrukcjami budowlanymi, lub ich częściami, mogą prowadzić do znacznych uszkodzeń lub nawet całkowitego zniszczenia konstrukcji. Celem niniejszego artykułu jest oszacowanie zakresu i intensywności zniszczeń na skutek zderzeń pomiędzy budynkiem głównym szpitala Olive View a wolnostojącą klatką schodową podczas trzęsienia...
-
Application of atmospheric pressure microwave plasma source for hydrogen production from ethanol
PublicationIn contrast to conventional technologies of hydrogen production like water electrolysis or coal gasification we propose a method based on the atmospheric pressure microwave plasma. In this paper we present results of the experimental investigations of the hydrogen production from ethanol in the atmospheric pressure plasma generated in waveguidesupplied cylindrical type nozzleless microwave (915 MHz and 2.45 GHz) plasma source (MPS)....
-
WERYFIKACJA WZMOCENIANIA ŚRODNIKÓW KROKWI DACHU ZBIORNIKA NA GAZ
PublicationPraca dotyczy wariantowej analizy wyselekcjonowanych detali konstrukcji dachu zbiornika na gaz w terminalu regazyfikacyjnym LNG w Świnoujściu. W kontekście bezpieczeństwa konstrukcji badano fakt pominięcia w trakcie budowy części przewidzianych w projekcie żeberek usztywniających środniki krokwi w strefie mocowania wieszaków. Obliczenia w środowisku MES przeprowadzono w dwóch etapach. Etap pierwszy obejmował liniową analizę całej...
-
Wpływ sposobu odwzorowania pojazdu szynowego na odpowiedź dynamiczną przęsła mostowego
PublicationW pracy przedstawiono rezultaty analiz numerycznych oraz badań eksploatacyjnych dwóch przęseł mostowych wymuszonych ruchomym pojazdem szynowym. Pojazd odwzorowano za pomocą czterech modeli uproszczonych: strumienia sił skupionych, strumienia mas skupionych oraz strumieni oscylatorów jedno- i dwumasowych. Analizy numeryczne wykonano przy wykorzystaniu MES. Potrzebne parametry dynamiczne wyznaczono na podstawie wyników identyfikacji...
-
Wstęp do badań wpływu ciśnienia na drgania mechaniczne na potrzeby modelowania ładunków rakiet kosmicznych
PublicationŚrodowisko dynamiczne rakiety kosmicznej jest wyjątkowo trudne dla ładunków wynoszonych w przestrzeń kosmiczną. W świetle zwiększonego zapotrzebowania na wynoszenie delikatnych eksperymentów, coraz dokładniej badane są drgania w trakcie lotu takiej rakiety. Aby przeanalizować wpływ drgań rakiety na ładunek, należy utworzyć model fizyczny, a następnie matematyczny odzwierciedlający zjawiska tam zachodzące. Jednym z ważniejszych...
-
Chracteristics of anaerobic ammonium oxidation initated by anaerobic granular sludge
PublicationTwo different mixed sludge, anaerobic granular sludge(R1) and anaerobic granular sludge with mature anaerobic ammonium oxidation (ANAMMOX) sludge (R2 )were used as the inocula in two up-flow reactors to enrich anaerobic ammonia-oxidizing bacteria (AnAOB),respectively.The total nitrogen removal rate of R1 reached 74% in 99 days, while R2 remained above 70% in only 48 days.The content of extracellular polymeric substance (EPS) in...
-
Most Kolejowy im. Ernesta Malinowskiego przez rzekę Wisłę w Toruniu. Eksperymentalna identyfikacja współczynnika dynamicznego elementów pomostu.
PublicationW artykule omówiono problematykę obliczania współczynnika dynamicznego poprzecznicy końcowej klasycznego mostu kratowego z jezdnią otwartą. Zwrócono uwagę na możliwość obliczenia współczynnika dynamicznego w zależności od źródła naprężeń. Przykład obliczeniowy wykazał 30% redukcję wartości naprężeń od ruchomych obciążeń w SGN przy nierównomiernym współczynniku dynamicznym. Obliczenia numeryczne i badania terenowe przeprowadzono...
-
Most średnicowy w Warszawie. Koncepcja przebudowy
PublicationArtykuł omawia koncepcję przebudowy Mostu Średnicowego w Warszawie, który, ze względu na zły stan techniczny i nieprzystosowanie do współczesnych wymagań, wymaga rekonstrukcji. Planowana przebudowa obejmuje wykorzystanie istniejących filarów nurtowych oraz wydłużenie mostu, co pozwoli na eliminację wiaduktów nad Wisłostradą i Wybrzeżem Szczecińskim. Przedstawiono trzy warianty konstrukcyjne: kratownicę o zmiennej wysokości, skrzynkowe...
-
Mechanika materiałów (PG_00057369), W/Ć, BM, II stop., sem1, lato, 2023/24
e-Learning CoursesCelem kursu jest przekazanie wiedzy z zakresu analizy i rozwiązywania zagadnień mechaniki i wytrzymałości ustrojów jednowymiarowych (kratownice, belki, ramy) oraz wybranych układów dwuwymiarowych (tarcze, płyty prostokątne i kołowe, zbiorniki ciśnieniowe); przygotowanie osób studiujących do rozwiązywania problemów obejmujących złożone przypadki wytrzymałości materiałów z zastosowaniem hipotez wytężeniowych; rozwinięcie umiejętności...
-
Where the Second World War in Europe broke out: the land-scape history of Westerplatte, Gdańsk/Danzig
PublicationWesterplatte is known as the place where the Second World War in Europe broke out. However, its history covers many other events involving Polish, German, Russian and even French politics over the last three centuries - neglected by many papers published in the current discussion. Due to its location at the entrance to the main harbour on the Baltic Sea entrance, Wester-platte-Peninsula is cartographically the best-documented part...
-
Offshore benthic habitat mapping based on object-based image analysis and geomorphometric approach. A case study from the Slupsk Bank, Southern Baltic Sea
PublicationBenthic habitat mapping is a rapidly growing field of underwater remote sensing studies. This study provides the first insight for high-resolution hydroacoustic surveys in the Slupsk Bank Natura 2000 site, one of the most valuable sites in the Polish Exclusive Zone of the Southern Baltic. This study developed a quick and transparent, automatic classification workflow based on multibeam echosounder and side-scan sonar surveys to...
-
Stability Assessment of Coastal Cliffs Incorporating Laser Scanning Technology and a Numerical Analysis
PublicationWe investigated the cli coast in Jastrzebia Gora, Poland. The measurements that were taken between 2014 and 2018 by applying terrestrial, mobile, and airborne laser scanning describe a huge geometric modification involving dislocations in a 2.5 m range. Dierential maps and a volumetric change analysis made it possible to identify the most deformed cli’s location. Part of the monitoring of coastal change involved the measurement...
-
Detection and size estimation of crack in plate based on guided wave propagation
PublicationThe paper presents results of the comprehensive theoretical and experimental investigation of crack detection in metallic plate using guided wave propagation. The main aim of the paper is to develop the novel method which would allow for linear crack size estimation with the use of minimal number of the transducers. In general, there exists the relation between length of the propagation path and the wave amplitude value. However,...
-
Self-Organising map neural network in the analysis of electromyography data of muscles acting at temporomandibular joint.
PublicationThe temporomandibular joint (TMJ) is the joint that via muscle action and jaw motion allows for necessary physiological performances such as mastication. Whereas mandible translates and rotates [1]. Estimation of activity of muscles acting at the TMJ provides a knowledge of activation pattern solely of a specific patient that an electromyography (EMG) examination was carried out [2]. In this work, a Self-Organising Maps (SOMs)...
-
Geographic Information System for Flood Hazard Analysis and Early Warning Using Numerical Weather Predictions
PublicationFloods are a phenomenon which causes significant losses of lives as well as property damage, which in turn severely impact the local economy. The nature of a flooding has been well researched, and several methods of flood hazard simulation have been established over the last decades. The current legislation in the European Union requires the Member States to create, maintain and update flood risk and hazard maps, as well as identify...
-
Improving Thermal Insulation Properties for Prefabricated Wall Components Made of Lightweight Aggregate Concrete with Open Structure
PublicationPorous concrete is commonly used in civil engineering due to its good thermal insulation properties in comparison with normal concrete and high compression strength in comparison with other building materials. An extremely porous concrete, called ‘lightweight aggregate concrete with open structure’ (LAC), is used in some German plants to produce prefabricated wall components. They are used mainly in hall buildings, e.g. supermarkets....
-
Analiza wpływu uderzenia wózka widłowego na zachowanie się elementów konstrukcji stalowych
PublicationProblem zderzeń jezdniowych środków transportu z elementami konstrukcji nośnej jest tematem wielu badań, zarówno numerycznych jak i eksperymentalnych. Odsłonięte słupy na podziemnych parkingach, słupy wewnętrzne w pomieszczeniach magazynowych, zewnętrzne słupy budynków usytuowanych blisko drogi są narażone na uderzenie poruszających się pojazdów. Celem artykułu jest przedstawienie wyników analizy numerycznej zachowania się w budynku...
-
Badania obszarów zagrożonych zniszczeniem w biomateriałach koron stomatologicznych
PublicationDo analizy obszarów zagrożonych zniszczeniem w biomateriałach koron stomatologicznych zastosowano analizę strukturalną elementów skończonych MES. Opracowano dwu wymiarowy model korony stomatologicznej zamocowanej na kikucie zęba, w którym określono obszary występowania poszczególnych materiałów. Przyjęte do obliczeń numerycznych wartości modułu Younga i współczynniki Poissona odniesiono do rzeczywistych biomateriałów korony stomatologicznej....
-
Modelowanie konstrukcji mostowych - obliczenia i weryfikacja ''in situ''
PublicationObiekty mostowe są konstrukcjami inżynierskimi, które ze względu na ich odpowiedzialność i długi okres eksploatacji - przed oddaniem do użytkowania poddawane są wszechstronnej ocenie w formie badań, zwanych potocznie próbnym obciążeniem. Zadaniem tych badań jest sprawdzenie poprawności pracy konstrukcji i przyjętych założeń projektowych. Przyciągające uwagę społeczeństwa próbne obciążenie na moście poprzedza projekt jego badań....
-
Wzmocnienie uszkodzonej belki typu T w przęśle wiaduktu drogowego
PublicationW artykule opisano metodę wzmocnienia belki prefabrykowanej typu T dźwigara wiaduktu drogowego uszkodzonej przez pojazd „wozidło”. Beton belki uległ zarysowaniom w wielu miejscach. Wystąpiły też ubytki otuliny strun sprężających. Zaproponowano naprawę i wzmocnienie przez dobetonowanie dodatkowej belki. Podczas naprawy zastosowano balastowanie przęsła w celu wciągnięcia nowego dźwigara do współpracy od ciężaru własnego i sprężenia....
-
NON-LINE ANALYSIS OF STIFFNESS IN COMPRESSION CONDITIONS
PublicationThe analyzes were aimed at demonstrating the influence of parameters describing the deformation of the structure on the uncertainty of critical force, and the impact of technological imperfections on stress uncertainty in compression conditions. In a linear buckling analysis, the problem is considered only for the initial, permanent state of the stiffness matrix. In the case of demonstrating the influence of initial deformations...
-
Ocena przyczyn uszkodzeń i awarii konstrukcji kompozytowych zbiorników osadników wtórnych oczyszczalni ścieków w Iłży podczas rozruchu technologicznego
PublicationPrzedmiotem niniejszej opinii jest ocena przyczyn uszkodzeń i awarii konstrukcji kompozytowych zbiorników osadników wtórnych oczyszczalni ścieków w miejscowości Iłża obejmująca rozwiązania projektowe, wykonawcze i rozruch technologiczny. Opinia ma na celu określenie przyczyn awarii zbiorników kompozytowych uwzględniając założenia i rozwiązania projektowe oraz proces ich obciążenia przy rozruchu technologicznym. Zakres opinii odnosi...
-
Self-assembly of secondary aryl amides in cocrystals with perfluoroaryl coformers: structural analysis and synthon preferences
PublicationCooperation of aryl⋯perfluoroaryl stacking interactions and hydrogen bonds was utilized in the construction of six novel cocrystals of aromatic cis-amides with pentafluorobenzoic acid (pfba) and pentafluorophenol (pfp). They were obtained by crystallization from solution and structurally characterized. In four instances, the components form heterotetrameric motifs, in which amide:amide homodimer interacts symmetrically on two sides...
-
Wybrane zagadnienia obliczeniowe w procesie projektowania kolejowego mostu łukowego z wieszakami w układzie siatkowym
PublicationArtykuł omawia proces projektowania mostu łukowego nad rzeką Dunajec w ramach modernizacji linii kolejowej nr 104 Chabówka – Nowy Sącz. Autorzy przedstawiają szczegółowe analizy koncepcyjne i statyczno-wytrzymałościowe, które doprowadziły do wyboru konstrukcji łukowej z siatkowym układem wieszaków (network arch) zamiast kratownicy. Decyzja ta umożliwiła optymalizację zużycia materiałów oraz zwiększenie walorów estetycznych mostu....
-
Investigation of Parallel Data Processing Using Hybrid High Performance CPU + GPU Systems and CUDA Streams
PublicationThe paper investigates parallel data processing in a hybrid CPU+GPU(s) system using multiple CUDA streams for overlapping communication and computations. This is crucial for efficient processing of data, in particular incoming data stream processing that would naturally be forwarded using multiple CUDA streams to GPUs. Performance is evaluated for various compute time to host-device communication time ratios, numbers of CUDA streams,...
-
NUMERYCZNA ANALIZA ZACHOWANIA SIĘ KOLIDUJĄCYCH ZE SOBĄ BUDYNKÓW STALOWYCH PODDANYCH OBCIĄŻENIOM SEJSMICZNYM
PublicationCelem niniejszego artykułu jest przedstawienie wyników nieliniowej analizy numerycznej dotyczącej zachowania się dwóch budynków o konstrukcji stalowej zderzających się ze sobą w wyniku oddziaływań sejsmicznych. W badaniach uwzględniono wpływ efektu prędkości odkształcenia na zachowanie się budowli, co dotychczas nie było analizowane. Model numeryczny oraz analiza dynamiczna, dla składowej NS trzęsienia ziemi El Centro z 1940 roku,...
-
Comparision of two numerical methods for buried steel culverts made of corrugated shell sheets.
PublicationW pracy omawia się dwie metody analizy statycznej obudowy tuneli i przepustów dużej średnicy. Pierwsza z nich, metoda sprężyn polega na modelowaniu ośrodka gruntowego radialnymi sprężynami reprezentującymi odkształcalność gruntu. Drugie podejście oparte jest na zastosowaniu metody elementów skończonych i programu SOFISTIC. W układzie obudowa - grunt obudowę modeluje się zwykłymi ramowymi elementami sprężystymi a otaczający...
-
Nośność zdeformowanych dźwigarów mostu drogowego przez rzekę Wisłę w Kiezmarku w świetle obliczeń numerycznych i badań In situ.
PublicationPo 30 latach eksploatacji, most drogowy przez rzekę Wisłę w Kiezmarku wymagał wzmocnienia, wynikającego z podniesienia klasy obciążenia. W trakcie prac nad modernizacją konstrukcji, stwierdzono ponad normowe deformacje środników we wszystkich dźwigarach przęseł mostu. Miały one charakter pierwotny i były wynikiem niedbałego wykonania konstrukcji. Oczywiste trudności związane z prostowaniem blisko 4 kilometrów środników, skłoniły...
-
Ekstrakcja do fazy stałej niejedno ma imię
PublicationW czasach, gdy we wszystkich przejawach aktywności człowieka trzeba się odnieść do przesłanek leżących u podstaw zrównoważonego rozwoju trudno jest uzasadnić stosowanie w praktyce analitycznej takich procedur i operacji, które pociągają za sobą konieczność:użycia dużych ilości rozpuszczalników i odczynników chemicznychdużych nakładów energii czy też przyczyniają się do wzrostu ekspozycji pracowników laboratoriów na niekorzystne...
-
Adiabatic potential energy curves of the KRb molecule
Open Research DataAdiabatic potential energy curves (APEC) of the singlet (s) and triplet (t) Sigma+, Sigma-, Pi, and Delta electronic states have been calculated for the KRb molecule. Presented APECs correlate with 11 atomic asymptotes, starting from ground K(4s)+Rb(5s) atomic limit and ending on double-excited K(4p)+Rb(5p) atomic limit. All results of the presented...
-
Techniki CAD w pracy inżyniera 2021/2022 sem./ letni
e-Learning CoursesKurs "Techniki CAD w pracy inżyniera" jest cyklem wykładów i laboratoriów dotyczących zastosowania nowoczesnych narzędzi CAD/CAE/CAM w inżynierii elektrycznej i mechanicznej. Zakres kursu obejmuje: Techniki modelowania w przestrzeni 2D i 3D, Wiązania obiektów - kinematyka odwrotna, Podstawy animacji obiektów, Przykłady analizy inżynierskiej z wykorzystaniem MES, Modelowanie wiązek przewodów i kabli elektrycznych, Opracowywanie...
-
Urban flash flood hazard identification and assessment applying geospatial techniques and hydrodynamic modeling; Erbil city case study, Kurdistan Region of Iraq
PublicationThis dissertation aims to investigate the factors behind flash flooding in Erbil's central district, located in the Kurdistan Region of Iraq, and develop a methodology for assessing flood hazards in the city, despite limited data accessibility. In this thesis, each factor was investigated, including analyzing extreme precipitation events in the last two decades, including their spatial and temporal distribution of rainfall, intensity,...
-
Wild oscillations in a nonlinear neuron model with resets: (II) Mixed-mode oscillations
PublicationThis work continues the analysis of complex dynamics in a class of bidimensional nonlinear hybrid dynamical systems with resets modeling neuronal voltage dynamics with adaptation and spike emission. We show that these models can generically display a form of mixed-mode oscillations (MMOs), which are trajectories featuring an alternation of small oscillations with spikes or bursts (multiple consecutive spikes). The mechanism by...
-
Nonlinear free and forced vibrations of a dielectric elastomer-based microcantilever for atomic force microscopy
PublicationThe majority of atomic force microcode (AFM) probes work based on piezoelectric actuation. However, some undesirable phenomena such as creep and hysteresis may appear in the piezoelectric actuators that limit their applications. This paper proposes a novel AFM probe based on dielectric elastomer actuators (DEAs). The DE is modeled via the use of a hyperelastic Cosserat model. Size effects and geometric nonlinearity are included...
-
Stateczność i niezawodność pełnomorskich platform wiertniczych
PublicationW pracy przedstawiono wieloletnie doświadczenia Autora w zakresie wybranych aspektów numerycznej analizy pełnomorskich platform wiertniczych, w szczególności stacjonarnych platform stalowych poddanych działaniu fal wiatrowych i wiatru. W opisie zachowania się platform uwzględniono współoddziaływanie trzech ośrodków: materiału konstrukcji, morskich fal wiatrowych i podłoża gruntowego. Przyjęcie do opisu stochastycznych właściwości...
-
Modelling and static analysis of thin-walled structures, problems and applications
PublicationW pracy przedstawiono pewne problemy związane z modelowaniem i analizą statyczną konstrukcji cienkościennych: belek, ram i rusztów zbudowanych z elementów o bisymetrycznym przekroju poprzecznym. Zachowanie elementów opisano za pomocą klasycznej teorii prętów cienkościennych o przekroju nieodkształcalnym. Uwzględniono tym samym efekty bimomentowe od skręcania belek. Niestyty brakuje koniecznych do przeprowadzenia analizy styacznej...
-
Hydrogen production from ethanol In nitrogen microwave plasma At atmospheric pressure
PublicationHydrogen seems to be one of the most promising alternative energy sources. It is a renewable fuel as it could be produced from e.g. waste or bio-ethanol. Furthermore hydrogen is compatible with fuel cells and is environmentally clean. In contrast to conventional methods of hydrogen production such as water electrolysis or coal gasification we propose a method based on atmospheric pressure microwave plasma. In this paper we present...