Search results for: teps
-
The concept of a new two-stage fuse for high power pulse forming
PublicationThis manuscript introduces the concept, physical operating principle and studies on a new and unique two stage forming fuse (TSFF) with interstage spark gap commutation and presents its application for forming high power pulses of extreme parameters. The paper classifies TSFF performance and compares it with conventional single-stage forming fuses. The conclusions are supported by analytical and experimental studies in laboratory...
-
Mn-Co spinel coatings on Crofer 22 APU by electrophoretic deposition: Up scaling, performance in SOFC stack at 850 °C and compositional modifications
PublicationCeramic coatings for metallic interconnects play a key role in limiting corrosion and chromium evaporation in solid oxide cells. This study presents the upscaling of the electrophoretic deposition (EPD) technique to process Mn-Co spinels on real-dimension Crofer 22 APU interconnects and the test in a SOFC stack. Area specific resistance of long-term test conducted for 5000 h at 850 °C demonstrated that two-steps sintering has a...
-
Electromagnetic Simulation with 3D FEM for Design Automation in 5G Era
PublicationElectromagnetic simulation and electronic design automation (EDA) play an important role in the design of 5G antennas and radio chips. The simulation challenges include electromagnetic effects and long simulation time and this paper focuses on simulation software based on finite-element method (FEM). The state-of-the-art EDA software using novel computational techniques based on FEM can not only accelerate numerical analysis, but...
-
Volumetric and torque efficiency of pumps during start-up in low ambient temperatures
PublicationThe volumetric, torque and total efficiency of hydraulic pumps change during start-up in low ambient temperatures, as well as in thermal shock conditions, un-til they reach the set conditions. The time to reach steady-state conditions de-pends on many parameters: ambient temperature, flow rate, fluid temperature, design of hydraulic units. The author carried out tests of hydraulic pumps in the Hydraulics Laboratory of the Faculty...
-
Architecture Design of a Networked Music Performance Platform for a Chamber Choir
PublicationThis paper describes an architecture design process for Networked Music Performance (NMP) platform for medium-sized conducted music ensembles, based on remote rehearsals of Academic Choir of Gdańsk University of Technology. The issues of real-time remote communication, in-person music performance, and NMP are described. Three iterative steps defining and extending the architecture of the NMP platform with additional features to...
-
A method of selecting light sources from night satellite scenes
PublicationSatellite images carries a lot of data. Very sophisticated methods of analyses may reveal very complicated nature of the observed objects. In case of night images, lights play the role of information sources. In this paper we would like to present results of the research aimed to describe light sources from satellite night images by providing description of their luminosity. The authors point source imaging data from the satellite...
-
Comparison of the effectiveness of automatic EEG signal class separation algorithms
PublicationIn this paper, an algorithm for automatic brain activity class identification of EEG (electroencephalographic) signals is presented. EEG signals are gathered from seventeen subjects performing one of the three tasks: resting, watching a music video and playing a simple logic game. The methodology applied consists of several steps, namely: signal acquisition, signal processing utilizing z-score normalization, parametrization and...
-
Mass Spectrometry-Based Direct Analytical Techniques
PublicationDirect analysis of samples is considered as one of the most environmentally sustainable solutions in analytical chemistry. In the ideal case, such solutions do not require sample preparation and analytes separation steps, therefore do not consumpt harmful substances (or consumpt only minimum amounts of them) and do not generate hazardous waste. Technical solutions for direct analysis also offer miniaturized and field-portable analyzers...
-
Modeling N2O behavior during denitrification with different carbon sources and electron acceptors
PublicationA mathematical model was developed for identification of the most important mechanism leading to nitrous oxide (N2O) accumulation in denitrifying activated sludge systems. The activated sludge model No. 2d (ASM2d) was extended to include intermediate three steps of the denitrification process. The formation and accumulation of nitric oxide (NO) was assumed to be very low in the performed laboratory experiments. These experiments...
-
General grants and development – a relationship without a future? The effects of the structure of general grants on the development of local government units in Poland
PublicationThe purpose of this paper is to attempt to identify the reasons for the lack of relationship between general grant revenue and investment expenditure of local government units. The author formulated the hypothesis that there is no link between general grants and investment expenditure and that the reason for this are the current spending on education, absorbing the entire amount of general grants received by local government units....
-
A Simplified Method of Trend Removal to Determine Noise Observed During a Supercapacitor’s Discharging
PublicationIn this paper, new method of trend removal is proposed. This is a simplified method based on Empirical Mode Decomposition (EMD). The method was applied for voltage time series observed during supercapacitor discharging process. It assured the determination of an additive noise component after subtracting the identified trend component. We analyzed voltage time series observed between the terminals of the supercapacitor when discharged...
-
Radar Signal Parameters Estimation Using Phase Accelerogram in the Time-Frequency Domain
PublicationRadar signal parameter estimation, in the context of the reconstruction of the received signal in a passive radar utilizing other radars as a source of illumination, is one of the fundamental steps in the signal processing chain in such a device. The task is also a crucial one in electronic reconnaissance systems, e.g. ELINT (Electronic Intelligence) systems. In order to obtain accurate results it is important to measure, estimate...
-
Recovery of silver metallization from damaged silicon cells
PublicationMetallization is one of the key process steps to fabricate solar cells with high performance in a cost-effective way. Majority of photovoltaic solar cell manufacturing uses thick film screen print metallization with Ag containing paste to produce solar cells. The average lifetime of PV modules can be expected to be more than 25 years. The disposal of PV systems will become a problem in view of the continually increasing production...
-
An application of multi-agent system for ship’s power systems design
PublicationDesign process of transport ship power system consists of structure (topology) and component elements selection. Compliance with the requirements for static components does not guarantee optimal dynamic characteristics of entire power system. Design steps are difficult to formalize and as a consequence to this reason expert and multi-agent systems are used for solving selected design issues. In the paper distributed multi-agent...
-
Implementation of power transformer controlled switching algorithm
PublicationThe article presents two new algorithms of controlled switching the power transformer. The main aim of the paper is to obtain formulas that determine the moments of closing of the circuit breaker poles. The study contains projects of control systems for both algorithms. Mathematical formulas for the time instants of the breaker poles closing were developed on the basis of electric circuit theory and magnetic circuit theory. The...
-
Low-Cost Open-Hardware System for Measurements of Antenna Far-Field Characteristics in Non-Anechoic Environments
PublicationExperimental validation belongs to the most important steps in the development of antenna structures. Measurements are normally performed in expensive, dedicated facilities such as anechoic chambers, or open-test sites. A high cost of their construction might not be justified when the main goal of antenna verification boils down to demonstration of the measurement procedure, or rough validation of the simulation models used for...
-
Entangled rendezvous: a possible application of Bell non-locality for mobile agents on networks
PublicationRendezvous is an old problem of assuring that two or more parties, initially separated, not knowing the position of each other, and not allowed to communicate, are striving to meet without pre-agreement on the meeting point. This problem has been extensively studied in classical computer science and has vivid importance to modern and future applications. Quantum non-locality, like Bell inequality violation, has shown that in many...
-
Force-deformation spectroscopy in contact mode
Open Research DataThe deformation-distance spectroscopic curve is obtained by registering the value of the probe cantilever deflection as a function of the elongation of the piezoelectric scanner. It assumes a simple relationship in the form of Hooke’s law, linking the deformation of the lever with the amount of its deflection caused by the proximity of the probe and...
-
Stochastic intervals for the family of quadratic maps
Open Research DataNumerical analysis of chaotic dynamics is a challenging task. The one-parameter families of logistic maps and closely related quadratic maps f_a(x)=a-x^2 are well-known examples of such dynamical systems. Determining parameter values that yield stochastic-like dynamics is especially difficult, because although this set has positive Lebesgue measure,...
-
Struktura wydatków na opiekę zdrowotną w europejskich krajach OECD w latach 2005–2014
PublicationCelem artykułu jest porównanie struktury wydatków na opiekę zdrowotną w wybranych krajach europejskich należących do OECD w latach 2005–2014, ze szczególnym uwzględnieniem różnic w modelach finansowania ochrony zdrowia. W analizie wykorzystano wskaźniki struktury wydatków bieżących. Finansowanie i organizacja opieki zdrowotnej w europejskich krajach OECD jest bardzo podobna, tzn. fundusze publiczne pochodzą z podatków lub składek...
-
Experimental and numerical evaluation of mechanical behaviour of composite structural insulated panels
PublicationComposite structural insulated panels (CSIPs) are novel prefabricated elements for structural applications. Panels under consideration are made from glass-fibre reinforced magnesia cement boards as facesheets and expanded polystyrene foam (EPS) as a core. Quasi-static full-scale and model bending tests under monotonic loading were performed to recognize mechanical properties of CSIPs in flexure. In addition, tensile, compressive,...
-
OECD Guidelines for Micro Statistics on Household Wealth
PublicationThis report reflects the contributions of members of the OECD Expert Group on Micro Statistics on Household Income, Consumption and Wealth. Members of the Expert Group included representatives from National Statistical Offices – Bob McColl (Chair, Australia); Alison Hale (Canada); Andre Bustamante and David Niculcar (Chile); Henrik Sejerbo Soerensen (Denmark); Yafit Alfandari (Israel); Shinji Yoshioka (Japan); Sinho Kim...
-
Automatic classification and mapping of the seabed using airborne LiDAR bathymetry
PublicationShallow coastal areas are among the most inhabited areas and are valuable for biodiversity, recreation and the economy. Due to climate change and sea level rise, sustainable management of coastal areas involves extensive exploration, monitoring, and protection. Current high-resolution remote sensing methods for monitoring these areas include bathymetric LiDAR. Therefore, this study presents a novel methodological approach to assess...
-
an intelligent image processing sensor - the algorithm and the hardware implementation
PublicationW artykule przedstawiono algorytm przeznaczony do rozpoznawania obiektów ruchomych w obrazie do celu analizy ruchu pojazdów. Algorytm został zrealizowany w układzie FPGA.Ang.: This paper describes the idea and theimplementation of the robust algorithm dedicated toextraction of moving vehicles from real-time cameraimages for the evaluation of traffic parameters, suchas the number of vehicles, their direction of movementand their...
-
Computer-Aided Design of Railroad Horizontal Arc Areas in Adapting to Satellite Measurements
PublicationThis paper presents a method of designing railway sections located in horizontal arcs. The adopted procedure is universal, i.e., it creates the possibility of varying both the type and the length of the assumed transition curves. This means that the applied analytical formulas apply to the boundary conditions of the transition curves and all of the simplifications widely existing in common algorithms have been eliminated. The presented...
-
Comparison of tuning procedures based on evolutionary algorithm for multi-region fuzzy-logic PID controller for non-linear plant
PublicationThe paper presents a comparison of tuning procedures for a multi-region fuzzy-logic controller used for nonlinear process control. This controller is composed of local PID controllers and fuzzy-logic mechanism that aggregates local control signals. Three off-line tuning procedures are presented. The first one focuses on separate tuning of local PID controllers gains in the case when the parameters of membership functions of fuzzy-logic...
-
Effect of modified soybeen oil amount on rheological characteriza-tion of polyurethane pre-polymers
PublicationPolyurethanes (Pu’s) are the polymeric materials which have got urethane groups in the structure. The properties of Pu’s depend both on the method of preparation and monomers used. Polyurethanes are produced by two methods known as one step or two step method called as “pre-polymers method”, especially for the case of segmented polyurethanes (SPU’s). These materials are thermoplastic block copolymers of the (AB)n type consisting...
-
The IPV6 Deployment - Best practices
PublicationThe new Internet Protocol IPv6 has been regarded for quite a long time as the only option to ensure uninterrupted operation for the Internet service providers andend-users in the current Internet. The article presents important faets about the IPv6, including current statistics of the IPv4 usage, the IPv6 statistics for Poland comparing to the whole Internet. Moreover, this paper shows important aspeets of migration from IPv4 towards...
-
Hybrid quantum-classical approach for atomistic simulation of metallic systems
PublicationThe learn-on-the-fly (LOTF) method [G. Csanyi et al., Phys. Rev. Lett. 93, 175503 (2004)] serves to seamlessly embed quantum-mechanical computations within a molecular-dynamics framework by continual local retuning of the potential's parameters so that it reproduces the quantum-mechanical forces. In its current formulation, it is suitable for systems where the interaction is short-ranged, such as covalently bonded semiconductors....
-
Affronter la distance et la séparation : l'utilisation des médias sociaux par les migrants dans leurs relations interpersonnelles
PublicationL'augmentation progressive de la mobilité, de l'interconnectivité et de l'instabilité, la transformation du travail et de l'emploi et celle de la communication (Castells, 2010) ont contribué à l’émergence d’une déracinés et séparés de leur foyer évoluent vers de nouvelles perspectives les migrants comme des sujets mobiles et interconnectés qui, grâce aux TIC, peuvent entretenir des relations et des connexions à distance les...
-
Quantification of ultrafine airborne particulate matter generated by the wear of car brake materials
PublicationThe wear of car brakes is one of the main sources of airborne particulate matter in urban environments. Ultrafine wear particles are of special environmental interest since they can easily penetrate the human body through inhalation and cause various diseases. In the present study, the contribution of ultrafine particles to airborne particulate matter emitted from car brake materials was investigated under different friction conditions....
-
Effect of ionic liquids on surface and photocatalytic properties of selected semiconducttors
PublicationThe main aim of this doctoral dissertation was to explain the role of ionic liquids in shaping the morphology of selected semiconductors, thereby enhancing the photocatalytic activity. In order to achieve this goal, the following research steps were taken: (i) developing synthesis methods of selected semiconductors, with particular emphasis on the electrochemical oxidation method; (ii) understanding the influence of the selected...
-
Enhancement of the Magnetic Coupling in Exfoliated CrCl 3 Crystals Observed by Low‐Temperature Magnetic Force Microscopy and X‐ray Magnetic Circular Dichroism
PublicationMagnetic crystals formed by 2D layers interacting by weak van der Waals forces are currently a hot research topic. When these crystals are thinned to nanometric size, they can manifest strikingly different magnetic behavior compared to the bulk form. This can be the result of, for example, quantum electronic confinement effects, the presence of defects, or pinning of the crystallographic structure in metastable phases induced by...
-
The new silica-based coated SPME fiber as universal support for the confinement of ionic liquid as an extraction medium
PublicationThe new silica-based SPME fiber coating is reported for the first time as universal support purposed to confinement of ionic liquid as an extraction medium. Fiber coating was prepared by the sol-gel process, using potassium silicate (K2SiO3) as a precursor and dimethylformamide (DMF) as a pore-forming medium. The concept of synthesis assumes obtaining a solid porous material on the surface of the glass rod and, being characterized...
-
Analysis of Validation and Simplification of Timber-Frame Structure Design Stage with PU-Foam Insulation
PublicationThe transition from experimental studies to the realm of numerical simulations is often necessary for further studies, but very difficult at the same time. This is especially the case for extended seismic analysis and earthquake-resistant design. This paper describes an approach to moving from the experimental testing of an elementary part of a wood-frame building structure to a numerical model, with the use of a commercial engineering...
-
Regulacje prawne odnoszące się do testowania samochodów autonomicznych na drogach publicznych w Polsce i w Kalifornii
PublicationThe current level of technological advancement allows for predicting that in the near future autonomous technology may be successfully used for the production of self-driving cars. Many companies (not necessarily related to the automotive sector) have spotted the chance of future profits and thus started working on testing and development of autonomous vehicles. The initiation of work has indicated the lack of possibility to test...
-
Nanocrystalline diamond sheets as protective coatings for fiber-optic measurement head
PublicationFiber-optic sensors find numerous applications in science and industry, but their full potential is limited because of the risk of damaging the measurement head, in particular, due to the vulnerability of unprotected tips of the fiber to mechanical damage and aggressive chemical agents. In this paper, we report the first use of a new nanocrystalline diamond structure in a fiber-optic measurement head as a protective coating of...
-
Installation of GNSS receivers on a mobile railway platform – methodology and measurement aspects
PublicationDetermining the course of a railway track axis using satellite methods relies on ensuring the precise assembly of GNSS receivers in dedicated measuring devices. Depending on the number of receivers, solutions that are based on placing the apparatus directly above the railway track axis (as well as in eccentric positions) are used to indirectly obtain data to form the basis of the desired results. This publication describes the...
-
New Trends in Sample Preparation Techniques for the Analysis of the Residues of Pharmaceuticals in Environmental Samples
PublicationPharmaceutical residues in the environment is a field of special interest due to the adverse effects to either human health or aquatic and soil environment. Pharmaceuticals have been already detected in underground, surface and wastewaters, soils, manure and sediments. The growing awareness of environmental pollution arising from human activity forces the need for their comprehensive determination. Environmental samples are complex...
-
Buenos Aires – Toward Comprehensive Development and Sustainable Mobility
PublicationThis paper is introducing Buenos Aires’ achievements and challenges in implementing comprehensive development and integrating efficient and sustainable transport system within its urban structure. There are several important steps in this process starting from urban regeneration of Puerto Madero, the introduction and then implementation of a strategic plan Modelo territorial (2010) and of Buenos Aires' Plan de Movilidad Sustentable...
-
Rheological properties, oxidative and thermal stability, and potential application of biopolyols prepared via two-step process from crude glycerol
PublicationIn this work, previously synthesized biopolyols were analyzed in terms of their rheological and thermal properties, very important from the technological point of view. For better evaluation of performed synthesis, the influence of its time and temperature on the properties of biopolyols was determined. In the end, obtained materials were used to prepare rigid polyurethane-polyisocyanurate (PUR-PIR) foams, to evaluate their potential...
-
Morphology control through the synthesis of metal-organic frameworks
PublicationDesignable morphology and predictable properties are the most challenging goals in material engineering. Features such as shape, size, porosity, agglomeration ratio significantly affect the final properties of metal- organic frameworks (MOFs) and can be regulated throughout synthesis parameters but require a deep under- standing of the mechanisms of MOFs formation. Herein, we systematically summarize the effects of the indi- vidual...
-
A simple modification of PCR thermal profile applied to evade persisting contamination
PublicationThe polymerase chain reaction (PCR), one of the most commonly applied methods of diagnostics and molecular biology has a frustrating downside known as the false positive signal or contamination. Several solutions to avoid and to eliminate PCR contaminations have been worked out to date but the implementation of these solutions to laboratory practice may be laborious and time consuming. A simple approach to circumvent the problem...
-
Flexural behavior of composite structural insulated panels with magnesium oxide board facings
PublicationThe current report is devoted to the flexural analysis of a composite structural insulated panel (CSIP) with magnesium oxide board facings and expanded polystyrene (EPS) core, that was recently introduced to the building industry. An advanced nonlinear FE model was created in the ABAQUS environment, able to simulate the CSIP’s flexural behavior in great detail. An original custom code procedure was developed, which allowed to include...
-
Pilot study of the influence of thermoplastic starch based polymer packaging material on the growth of diatom population in sea water environment
PublicationNovel polymeric packaging materials susceptible to environmentally friendly decomposition appeared on the global market. The paper is devoted to an investigation of the impact of degradable polymer packaging on marine life. The chosen polymer was a commercial packaging based on thermoplastic starch (TPS over 85%). The microorganism chosen was Phaeodactylum tricornutum diatom (identified in many aquatic reservoirs, with a tendency...
-
Uniwersalny program komputerowy do projektowania zmiany kierunku trasy
PublicationW pracy przedstawiono kolejny program komputerowy stanowiący implementację algorytmu obliczeniowego dotyczącego projektowania zmiany kierunku trasy kolejowej, dostosowanego do techniki ciągłych pomiarów satelitarnych. Program ten ma charakter uniwersalny, gdyż w ogólnym przypadku obejmuje wprowadzenie do układu geometrycznego dwóch łuków kołowych o różnym promieniu, czyli zastosowanie łuku koszowego. Może się to okazać szczególnie...
-
Metody oczyszczania odcieków z procesów przeróbki osadów w komorach fermentacji
PublicationOdcieki z beztlenowych procesów przeróbki osadu w komorach fermentacji (tzw. wody poosadowe) są istotnym źródłem azotu dopływającego do części biologicznej oczyszczalni ścieków. Odpowiednie oczyszczanie tych wód może więc, w bardzo istotny sposób wpłynąć na warunki eksploatacji oczyszczalni. Konwencjonalny proces usuwania amoniaku za pomocą dwóch faz, tj. nitryfikacji i denitryfikacji, są coraz częściej zastępowane przez jednoetapowy...
-
Pączkowanie - metoda rozwoju interoperacyjnych komponentów dla systemów rozproszonych = Budding – the software development method of interoperable components for distributed systems
PublicationPrzedstawiono 2 współczesne metody wytwarzania oprogramowania: iteracyjno-przyrostową oraz techniki zwinne, ich zalety i wady w kontekście budowy interoperacyjnych platform i środowisk rozproszonych. Zaprezentowano metodę rozwoju oprogramowania przez pączkowanie, jej założenia, zalety i wady. Przedstawiono technologie, na bazie których działa metodologia wytwarzania oprogramowania przez pączkowanie: Software Product Line, Enterprise...
-
ABSORPCJA, METABOLIZM I ROLA BIOLOGICZNA KWASÓW NUKLEINOWYCH OBECNYCH W ŻYWNOŚCI
PublicationKwasy nukleinowe należą do niedocenianych składników żywności, szczególnie surowej lub nisko przetworzonej. W niniejszej publikacji skupiono się na omówieniu przemian, jakim podlegają kwasy nukleinowe w przewodzie pokarmowym człowieka, procesie absorpcji nukleotydów oraz nukleozydów z przewodu pokarmowego, a także przedstawiono podstawowe etapy ich metabolizmu w komórkach organizmu. Produkty trawienia kwasów nukleinowych stanowią...
-
Biometryczna kontrola dostępu
PublicationOpisano szczegółowo algorytm detekcji oraz identyfikacji człowieka na podstawie punktów nodalnych twarzy. Zdefiniowano pojęcia: biometria, proces pomiaru biometrycznego, metody biometrycznej identyfikacji oraz kontrola dostępu. Przedstawiono opis opracowanego systemu biometrycznej identyfikacji wykorzystującego sztuczne sieci neuronowe. Podano wyniki badań oraz przeprowadzono ich wnikliwą dyskusję.Biometrics is the study of automated...