displaying 1000 best results Help
Search results for: comparison
-
Dynamic Nanoimpedance Characterization of the Atomic Force Microscope Tip-Surface Contact
PublicationNanoimpedance measurements, using the dynamic impedance spectroscopy technique, were carried out during loading and unloading force of a probe on three kinds of materials of different resistivity. These materials were: gold, boron-doped diamond, and AISI 304 stainless steel. Changes of impedance spectra versus applied force were registered and differences in the tip-to-sample contact character on each material were revealed. To...
-
3D Computer Model of the Hip Joint Cartilage
PublicationThis paper presents 3D computer model of the hip joint cartilage in the ANSYS program. Model is made on the basis of anatomy and collected data on the material constants of bone and cartilage components. Analysis and comparison of biochemical model, viscoelastic and molecular mixed - aggregation serves to facilitate the creation of the next model of reality, which could be used in the design of joint prostheses. The correctness...
-
EXPERIMENTAL AND THEORETICAL FLOW OF THE FORCES IN DEEP BEAMS WITH CANTILEVAR
PublicationThis article presents the results of experimental research carried out on deep beams with cantilever which was loaded throughout the depth. The main deep beam was directly simply supported on the one side. On the other side the deep beam was suspended in another deep member situated at right angles. All deep beams created a spatial arrangement. The paper is focused on the analysis of the cracks morphology and flow of the internal...
-
ANALYSIS OF EFFECTIVENESS AND COMPUTATIONAL COMPLEXITY OF TREND REMOVAL METHODS
PublicationThe paper presents a method of processing measurement data due to remove slowly varying component of the trend occurring in the recorded waveforms. Comparison of computational complexity and trend removal efficiency between some commonly used methods is presented. The impact of these procedures on probability distribution and power spectral density is shown. Effectiveness and computational complexity of these methods depend essentially...
-
Improvement of Imperfect String Matching Based on Asymetric n-Grams
PublicationTypical approaches to string comparing treats them as either different or identical without taking into account the possibility of misspelling of the word. In this article we present an approach we used for improvement of imperfect string matching that allows one to reconstruct potential string distortions. The proposed method increases the quality of imperfect string matching, allowing the lookup of misspelled words without significant...
-
Method of lines for nonlinear first order partial functional differential equations.
PublicationClassical solutions of initial problems for nonlinear functional differential equations of Hamilton--Jacobi type are approximated by solutions of associated differential difference systems. A method of quasilinearization is adopted. Sufficient conditions for the convergence of the method of lines and error estimates for approximate solutions are given. Nonlinear estimates of the Perron type with respect to functional variables...
-
Method of lines for Hamilton-Jacobi functional differential equations.
PublicationInitial boundary value problems for nonlinear first order partial functional differential equations are transformed by discretization in space variables into systems of ordinary functional differential equations. A method of quasi linearization is adopted. Suffcient conditions for the convergence of the method of lines and error estimates for approximate solutions are presented. The proof of the stability of the diffrential difference...
-
Fatigue life prediction of notched components under size effect using strain energy reformulated critical distance theory
PublicationNotch and size effects show significant impact on the fatigue performance of engineering components, which deserves special attention. In this work, a strain energy reformulated critical distance theory was developed for fatigue life prediction of notched components under size effect. Experimental data of different notched specimens manufactured from GH4169, TC4, TC11 alloys and low carbon steel En3B were used for model validation...
-
Comparative Study of the Mechanical Behaviour of Bitumen- and Cement-Dominated Mixtures with Reclaimed Asphalt
PublicationThe bitumen emulsion-based recycling is a commonly used maintenance treatment in the rehabilitation of low-and medium-volume roads in Europe. Nevertheless, the wide range of climatic conditions across the continent resulted in the variety of mixture concepts and the requirements being adopted for various local conditions. In this regard, the most commonly used parameter to distinguish between the main mixture concepts is bitumen...
-
Field investigation of low-temperature cracking and stiffness moduli on selected roads with conventional and high modulus asphalt concrete
PublicationHigh Modulus Asphalt Concrete (HMAC) was introduced in Poland as a one of the solutions to the problem of rutting, type of deterioration common in the 1990s. After first encouraging trials in 2002 HMAC was widely used for heavily loaded national roads and motorways. However some concerns were raised about low-temperature cracking of HMAC. This was the main reason of the studies presented in this article were started. The article...
-
Drill holes decrease cancellous bone strength: A comparative study of 33 paired osteoporotic human and 9 paired artificial bone samples
PublicationThis study was designed to compare compressive strength of cancellous bone retrieved from the femoral head in a specimen with and without guide wire hole, with comparison to synthetic bone samples. Femoral heads retrieved from 33 patients who sustained femoral neck fractures and underwent hip arthroplasty were cut into cuboids leaving two matching samples from the same femoral head. Similar samples were prepared from synthetic femurs....
-
Integrated plant-wide modelling for evaluation of the energy balance and greenhouse gas footprint in large wastewater treatment plants
PublicationModern wastewater treatment plants (WWTPs) should maintain a balance between three combined sustainability criteria, including effluent quality, energy performance and greenhouse gas (GHG) emissions. All of these criteria were considered in the integrated plant-wide model developed in this study. The proposed model incorporates new features, including: (i) the addition of associated facilities to the overall energy balance and...
-
Investigation into MPI All-Reduce Performance in a Distributed Cluster with Consideration of Imbalanced Process Arrival Patterns
PublicationThe paper presents an evaluation of all-reduce collective MPI algorithms for an environment based on a geographically-distributed compute cluster. The testbed was split into two sites: CI TASK in Gdansk University of Technology and ICM in University of Warsaw, located about 300 km from each other, both connected by a fast optical fiber Ethernet-based 100 Gbps network (900 km part of the PIONIER backbone). Each site hosted a set...
-
Reduced-cost optimization-based miniaturization of microwave passives by multi-resolution EM simulations for internet of things and space-limited applications
PublicationStringent performance specifications along with constraints imposed on physical dimensions, make the design of contemporary microwave components a truly onerous task. In recent years, the latter demand has been growing in importance, with the innovative application areas such as Internet of Things coming into play. The need to employ full-wave electromagnetic (EM) simu-lations for response evaluation, reliable yet CPU heavy, only...
-
Teratomas of Drosera capensis var. alba as a source of naphthoquinone: ramentaceone
PublicationPlants belonging to genus Drosera (family Droseraceae) contain pharmacologically active naphthoquinones such as ramentaceone and plumbagin. Hairy root cultures obtained following Agrobacterium rhizogenes-mediated transformation have been reported to produce elevated levels of secondary compounds as well as exhibit desirable rapid biomass accumulation in comparison to untransformed plants. The aim of this study was to establish...
-
Modeling hydrolysis of slowly biodegradable organic compounds in biological nutrient removal activated sludge systems
PublicationHydrolysis is an important process in biological wastewater treatment and is known to be the ratelimiting step in organic carbon removal from municipal or industrial wastewater. The influence of the readily biodegradable chemical oxygen demand fraction in biological wastewater treatment systems has been extensively investigated, but little is known about the effects of slowly biodegradable substrate (XS) on denitrification and...
-
Antioxidant activities and bioactive components in some berries
PublicationThe objective of this study was to evaluate the antioxidant and binding effects of gooseberry, a less-stud-ied berry, and to compare with blueberry and cranberry in the model of interaction with human serum albumin (HSA). The relationship between the scavenging properties of dietary polyphenols of the selected berries and their affinities for HSA were investigated by fluorescence anal- ysis. In order to perform the extraction and...
-
Numerical Study on Mitigation of Flow Maldistribution in Parallel Microchannel Heat Sink: Channels Variable Width Versus Variable Height Approach
PublicationMicrochannel heat sink on one hand enjoys benefits of intensified several folds heat transfer performance but on the other hand has to suffer aggravated form of trifling limitations associated with imperfect hydrodynamics and heat transfer behavior. Flow maldistribution is one of such limitation that exaggerates temperature nonuniformity across parallel microchannels leading to increase in maximum base temperature. Recently, variable...
-
The effect of imidazolium ionic liquid on the morphology of Pt nanoparticles deposited on the surface of SrTiO3 and photoactivity of Pt–SrTiO3 composite in the H2 generation reaction
PublicationPhotocatalytic water splitting has great potential in solar-hydrogen production as a low-cost and environmentally friendly method. Different unique techniques used to obtain photocatalysts with various modifications to improve H2 generation have been introduced. In the present work, SrTiO3 was successfully synthesized via the solvothermal method in the presence of ionic liquid (IL) - 1-butyl-3-methylimidazolium bromide ([BMIM][Br])...
-
Deep Learning Optimization for Edge Devices: Analysis of Training Quantization Parameters
PublicationThis paper focuses on convolution neural network quantization problem. The quantization has a distinct stage of data conversion from floating-point into integer-point numbers. In general, the process of quantization is associated with the reduction of the matrix dimension via limited precision of the numbers. However, the training and inference stages of deep learning neural network are limited by the space of the memory and a...
-
Modelowanie losowych imperfekcji geometrycznych przestrzennych konstrukcji metalowych
PublicationImperfekcje geometryczne zbiorników, silosów i powłok siatkowych mogą znaczą-co wpłynąć na ich nośność, a więc powinny być one uwzględniane w obliczeniach komputerowych i w procesie projektowania. Wykazano, że przy podstawowych obcią-żeniach, działających na tego typu konstrukcje, tj. podciśnieniu oraz naporu wiatru i śniegu (w przypadku powłok siatkowych), wykazują wyraźne różnice w porównaniu z analogicznymi wynikami dla tych...
-
Modelowanie i symulacja ruchu pojazdu zabytkowego podczas hamowania
PublicationOpracowano model samochodu zabytkowego z wykorzystaniem metody masa-sprężyna, służącego do symulacji procesu hamowania pojazdu zabytkowego z możliwością pomiaru drogi hamowania. Konfiguracja sieci połączeń między punktami mas elementów zawieszenia oraz opony okazuje się mieć bardzo duży wpływ na zachowanie symulowanego samochodu podczas hamowania. Poprawność symulacji sprawdzono porównując wyniki uzyskane z symulacji oraz z pomiarów...
-
Ab-initio study of electrical and optical properties of allylamine
PublicationThe Density functional theory is one of most promising methodology in fast and accurate calculations of electrical and optical properties from the atomic basis. In this paper, we calculate electrical and optical properties of allylamine (2-propen 1- amine) in terms of accuracy and speed of calculations obtained by selection of DFT-1/2 method with ultrasoft Vanderbilt pseudopotentials. Comparison of density of states between...
-
Testing the Diagnostic Utility of Recombinant Toxoplasma Gondii Chimeric Antigens – Generated Datasets
PublicationThe datasets titled Toxoplasma gondii recombinant chimeric antigens – IgM and IgG ELISAs – mouse serum samples and Toxoplasma gondii recombinant chimeric antigens – IgG and IgM ELISAs – human serum samples contain absorbance measurements obtained during serological tests using mouse and human sera in enzyme-linked immunosorbent assay (ELISA) tests based on recombinant chimeric antigens. The datasets allows a comparison of absorbance...
-
A Review on Deactivation and Regeneration of Catalysts for Dimethyl Ether Synthesis
Publicationhe deactivation of catalysts and their regeneration are two very important challenges that need to be addressed for many industrial processes. The most quoted reasons for the deterioration of dimethyl ether synthesis (DME) concern the sintering and the hydrothermal leaching of copper particles, their migration to acid sites, the partial formation of copper and zinc hydroxycarbonates, the formation of carbon deposits, and surface...
-
Investigation of the aerodynamics of an innovative verticalaxis wind turbine
PublicationThis paper presents a preliminary three dimensional analysis of the transient aerodynamic phenomena occurring in the innovative modification of classic Savonius wind turbine. An attempt to explain the increased efficiency of the innovative design in comparison with the traditional solution is undertaken. Several vorticity measures such as enstrophy, absolute helicity and the integral of the velocity gradient tensor second invariant...
-
Handwritten signature verification system employing wireless biometric pen
PublicationThe handwritten signature verification system being a part of the developed multimodal biometric banking stand is presented. The hardware component of the solution is described with a focus on the signature acquisition and on verification procedures. The signature is acquired employing an accelerometer and a gyroscope built-in the biometric pen plus pressure sensors for the assessment of the proper pen grip and then the signature...
-
Qualitative evaluation of distributed clinical systems supporting research teams working on large-scale data
PublicationInthispaper,fivecontemporaryscalablesystemstosupportmedicalresearchteams are presented. Their functionalities extend from heterogeneous unstructured data acquisition through large-scale data storing, to on-the-fly analyzing by using robust methods. Such kinds of systems can be useful in the development of new medical procedures and recommendation rules for decision support systems. A short description of each of them is provided....
-
Multidisciplinary Open System Transferring Knowledge for R2B Development
PublicationDespite many efforts, there is still a serious problem in transferring knowledge from research to business. The problem is especially visible in Poland – the cooperation of R2B is ineffective. We are trying to solve this problem using some IT support. The manuscript presents some solutions developed at the Gdańsk University of Technology. In particular, the platform called “MOST Knowledge” is deeply described. Its layer architecture,...
-
Jahn-Teller and related conical intersections in the benzene radical cation and the monofluoro derivate
PublicationThe multi-state multi-mode vibronic interactions in the benzene radical cation and its monofluoro derivative have been investigated theoretically, based on high-level electronic structure calculations for the system parameters and a quantum treatment of the nuclear motion. The available experimental data are well reproduced. The interplay of different vibronic coupling mechanisms is pointed out leading to multiple nonadiabatic...
-
A Stand for Measurement and Prediction of Scattering Properties of Diffusers
PublicationIn this paper we present a set of solutions which may be used for prototyping and simulation of acoustic scattering devices. A system proposed is capable of measuring sound field. Also a way to use an open source solution for simulation of scattering phenomena occurring in proximity of acoustic diffusers is shown. The result of our work are measurement procedure and a prototype of the simulation script based on FEniCS - an open source...
-
Ab-initio study of electrical and optical properties of allylamine
PublicationThe Density functional theory is one of most promising methodology in fast and accurate calculations of electrical and optical properties from the atomic basis. In this paper, we calculate electrical and optical properties of allylamine (2-propen 1- amine) in terms of accuracy and speed of calculations obtained by selection of DFT-1/2 method with ultrasoft Vanderbilt pseudopotentials. Comparison of density of states between molecule...
-
New sample preparation strategies for comprehensive lipidomics of human breast milk
PublicationGLOBAL PROFILING ANALYSIS OF HUMAN BREAST MILK (HBM) LIPIDS IS HINDERED BY COMPLEX COMPOSITION OF HBM. THIS PROBLEM IS HUGE FROM ANALYTICAL POINT OF VIEW, SINCE DUE TO THAT DETECTION OF ALL HBM LIPIDS DURING ONE ANALYTICAL RUN IS LIMITED. THUS, SAMPLE PREPARATION STEP CONSTITUTES A CRUCIAL STEP IN UNTARGETED LIPIDOMIC ANALYSIS OF HBM, ESPECIALLY WHEN SEMI-QUANTITATIVE ANALYSIS IS ASSUMED. HEREIN, WE PRESENT A COMPARISON OF PUBLISHED...
-
Reliable method of assessing fracture properties of asymmetric bonded joints
PublicationTwo methods of assessing fracture properties of adhesive joints were studied. Two wedge tests: with continuous deflection and with force measurements were compared. Asymmetric geometry of the bonded joint was considered, i.e. two different plates of aluminium alloys: Al-Cu and Al-Mg, were bonded with epoxy DGEBA adhesive. The analytical model is shown to estimate the values of fracture properties: crack position and critical fracture...
-
Comparative analysis of balancing of V6 engines with common- and split-pin crankshafts
PublicationAn analysis of balancing of V6 engines equipped with split-pin crankshafts with any cylinder bank angle based on the mathematical relations derived in the paper was carried out. A comparison of the quality of their balancing with engines equipped with common-pin crankshafts was also carried out. The bank angle ranges beneficial for balancing of moments of inertia forces in reciprocating motion were determined. A mathematical relation...
-
Titania nanotubes infiltrated with conducting polymer PEDOT modified by Prussian Blue – a novel type of organic-inorganic heterojunction characterised with enhanced photoactivity.
PublicationA highly ordered p–n heterojunction was formed based on titania nanotubes containing a conducting polymer with Prussian blue matrix. The study demonstrates, for the first time, cases when a composite based on titania array scaffolding and Prussian blue embedded in PEDOT exhibits reversible FeII/FeIII redox activity. Highly enhanced photoactivity and capacitance of the obtained material are depicted in comparison to pristine titania....
-
3D Acoustic Field Intensity Probe Design and Measurements
PublicationThe aim of this paper is two-fold. First, some basic notions on acoustic field intensity and its measurement are shortly recalled. Then, the equipment and the measurement procedure used in the sound intensity in the performed research study are described. The second goal is to present details of the design of the engineered 3D intensity probe, as well as the algorithms developed and applied for that purpose. Results of the intensity...
-
An Approach to Mean Path Loss Model Estimation for Off-Body Channels
PublicationThis paper presents an approach to estimation of the mean path loss model parameters in off-body Body Area Networks channels. In this approach, the path loss exponent is constrained to a value obtained for the line-of-sight (LoS) propagation in the co-polarised channel, considering a generalised static scenario. The comparison of the goodness of fit between the proposed approach and other approaches, for a set of measurements obtained...
-
Evaluation of Sound Enhancement in Mobile Device Using Virtual Bass Synthesiss Algorithm
PublicationAn experiment conducted to validate possibility of use virtual bass synthesis (VBS) algorithm in a portable computer is presented. The subjective listening tests based on the procedure of pairwise comparison between VBS, based on the so-called missing fundamental phenomenon, and standard bass boost technique are employed. The evaluation was carried out in two types of conditions: in a professional listening room and employing an...
-
Electron energy-loss spectroscopy of excited states of the diazine molecules: Pyridazine
PublicationExcitation of the valence electronic states of the pyridazine molecules in the gas phase have been studied using the technique of electron energy-loss spectroscopy. Varying the electron scattering conditions, the residual electron energy and scattering angle, enabled the optically-allowed and -forbidden excitations to be differentiated. The measured energy-loss spectra enabled the vertical excitation energies of the observed states...
-
Optical properties of daylight curable resin doped with nanodiamond powder
PublicationIn this paper a new material for 3D printing was elaborated on. Since diamond has very good optical properties, an idea occurred to us to apply it in 3D printing process. A mixture of nanodiamond powder and a standard 3D printing resin was created and several printouts have been completed. They have been tested for their abilities to transmit and absorb light in a wide spectrum of wavelengths. It turned out that the nanopowder...
-
Karol Flisikowski dr inż.
PeopleKarol Flisikowski works as Associate Professor at the Department of Statistics and Econometrics, Faculty of Management and Economics, Gdansk University of Technology. He is responsible for teaching descriptive and mathematical statistics (in Polish and English), as well as scientific research in the field of social statistics. He has been a participant in many national and international conferences, where he has presented the results...
-
Przepustowość przepustu niezatopionego
PublicationPodczas przepływu w warunkach niezatopionego wlotu i wylotu w przewodzie przepustu woda tworzyć będzie swobodne zwierciadło. Przepływ bezciśnieniowy w przewodzie przepustu może wystąpić również w warunkach zatopionego wlotu. W pracy porównano wyniki obliczeń przepustowości całego przepustu i samego przewodu o przekroju kołowym i kwadratowym. W warunkach spokojnego ruchu wody, przy braku spiętrzenia na wylocie, o przepustowości...
-
An optimal sliding mode control based on immune-wavelet algorithm for underwater robotic manipulator
PublicationIn this paper, a robust optimal Sliding Mode Controller (SMC) based on new algorithm of Artificial Immune System (AIS) is proposed for trajectory tracking of underwater manipulators. A new AIS algorithm is used to derive optimal values of surface parameters and boundary layer thickness in SMC with considering minimum torques and error. Surface parameters and boundary layer thickness are considered as antibody in AIS and Morlet...
-
A history of the physical and chemical stability of pharmaceuticals : a review
Publication: There is a great need for a broad range review of stability tests of active pharmaceutical ingredients (APIs) in comparison with current requirements contained in the pharmacopoeia. This review focuses on a pharmaceutical history of physical and chemical stability determination. Traditional knowledge must be considered in the context of physical stability, while new knowledge must be applied and acquired in terms of identification...
-
The Reactivity of the Imine Bond within Polynuclear Nickel(II) Complexes
PublicationThree novel Ni complexes with the Schiff base ligand 2-methoxy-6-(E-2-pyridyliminomethyl)-phenol (L1) are described. In comparison with the similar 2-(pyridine-2-ylimino-methyl)phenol (pymp), the mode of coordination of L1 is altered due to the presence of methoxy substituent introducing the sterical hindrance. During the synthesis of the complexes, partial hydrolysis of the ligand was observed. Since such immediate hydrolysis...
-
Deep Learning-Based LOS and NLOS Identification in Wireless Body Area Networks
PublicationIn this article, the usage of deep learning (DL) in ultra-wideband (UWB) Wireless Body Area Networks (WBANs) is presented. The developed approach, using channel impulse response, allows higher efficiency in identifying the direct visibility conditions between nodes in off-body communication with comparison to the methods described in the literature. The effectiveness of the proposed deep feedforward neural network was checked on...
-
Immunosuppressive properties of amino acid and peptide derivatives of mycophenolic acid
PublicationMycophenolic acid (MPA) was coupled with amino acids and biologically active peptides including derivatives of tuftsin to modify its immunosuppressive properties. Both amino acid unit in the case of simple MPA amides and modifications within peptide moiety of MPA - tuftsin conjugates influenced the observed activity. Antiproliferative potential of the obtained conjugates was investigated in vitro and MPA amides with threonine methyl...
-
Taq DNA polymerase fused with DNA binding protein with increased resistance to inhibitors from clinical samples
PublicationNowadays PCR method is commonly used in molecular diagnostic. However, in many cases PCR is limited, by the presence of inhibitory substances in biological, soil or food samples Efficiency and fidelity of amplification is strongly connected with DNA polymerase and reaction conditions. To meet the requirements of modern diagnostic methods it is essential to seeking for new DNA polymerases with better properties useful in these field....
-
Detection of damages in a rivetted plate
PublicationThe paper presents the results of damage detection in a riveted aluminium plate. The detection method has been based on Lamb wave propagation. The plate has been analysed numerically and experimentally. Numerical calculations have been carried out by the use of the time-domain spectral finite element method, while for the experimental analysis laser scanning Doppler vibrometry (LSDV) has been utilised. The panel has been excited...