Search
Filters
total: 338
Search results for: deteriorating jobs
-
High meniscal slope angle as a risk factor for meniscal allograft extrusion
PublicationA meniscal graft extrusion is still an unresolved problem that affects most patients after a meniscal transplantation. Despite the advances in surgical techniques, together with the improved methods for a meniscal allograft sizing, success is only observed in up to 75% of patients after they experience a meniscal allograft transplantation. Because a meniscal extrusion is associated with a cartilage deterioration and the progression...
-
Performance properties of rigid polyurethane-polyisocyanurate/brewers’ spent grain foamed composites as function of isocyanate index
PublicationIn the presented work, rigid polyurethane-polyisocyanurate (PUR-PIR) foams filled with brewers’ spent grain (BSG) were prepared. The influence of the isocyanate index (II) on its performance was investigated. Foams obtained with higher isocyanate index required a higher amount of hydrofluorocarbon physical blowing agent to provide the same apparent density of material. An increase of isocyanate index resulted in a slight decrease...
-
Pre-existing arterial hypertension as a risk factor for early left ventricular systolic dysfunction following (R)-CHOP chemotherapy in patients with lymphoma
Publication -
PSYCHOLOGICAL CAPITAL AND CHALLENGE APPRAISAL FOSTER THRIVING IN THE GLOBALIZED MULTICULTURAL WORKPLACE
PublicationThe purpose of the study was to examine the psychological resources which foster thriving in multicultural work settings of multinational corporations (MNCs) - the companies that are evident manifestation of globalization. Although globalized multicultural workplace creates specific job demands that pose unique occupational stress to individuals, some personal resources enable them to deal with these demands and to thrive. Thriving...
-
Game Theory Analysis of Bidding for a Construction Contract
PublicationThe authors are concerned with a bidding problem. There are two companies (P1 and P2) bidding for a highway construction project. In order to be more competitive, P1 considers buying a new gravel pit near the construction site. The basic cost of the pit is known to both companies. However, there is also an additional, hidden, cost (C) known only to P1. P2 is uncertain whether the hidden cost is C = 0 or C = x. P1 plans to bid for...
-
Pressure-induced flow processing behind the superior mechanical properties and heat-resistance performance of poly(butylene succinate)
PublicationWe propose a pressure-induced flow (PIF) processing method for the simultaneous enhancement of strength, toughness, and heat resistance of biodegradable poly(butylene succinate) (PBS). The pressure and temperature were systematically adjusted to optimize the tensile strength of PBS. Under the optimized processing conditions, the structured PBS was characterized by relatively high strength of 89.5 MPa, toughness of 21.4 kJ·m−2 ,...
-
Applying molecular dynamics simulation to take the fracture fingerprint of polycrystalline SiC nanosheets
PublicationGraphene-like nanosheets are the key elements of advanced materials and systems. The mechanical behavior of the structurally perfect 2D nanostructures is well documented, but that of polycrystalline ones is less understood. Herein, we applied molecular dynamics simulation (MDS) to take the fracture fingerprint of polycrystalline SiC nanosheets (PSiCNS), where monocrystalline SiC nanosheets (MSiCNS) was the reference nanosheet....
-
Pool Boiling of Water–Al2O3 and Water–Cu Nanofluids Outside Porous Coated Tubes
PublicationThis paper deals with pool boiling ofwater–Al2O3 and water–Cu nanofluids on porous coated, horizontal tubes. Commercially available stainless-steel tubes having 10 mm outside diameter and 0.6 mm wall thickness were used to fabricate a test heater. Aluminum porous coatings 0.15 mm thick with porosity of about 40% were produced by plasma spraying. A smooth tube served as a reference tube. The experiments were conducted under different...
-
Mechanical, Thermal and Rheological Properties of Polyethylene-Based Composites Filled with Micrometric Aluminum Powder
PublicationInvestigations related to polymer/metal composites are often limited to the analysis of the electrical and thermal conductivity of the materials. The presented study aims to analyze the impact of aluminum (Al) filler content (from 1 to 20 wt%) on the rarely investigated properties of composites based on the high-density polyethylene (HDPE) matrix. The crystalline structure, rheological (melt flow index and oscillatory rheometry),...
-
Chemical surface etching methods for ground tire rubber as sustainable approach for environmentally-friendly composites development– a review
PublicationGround tire rubber (GTR) has been used as a sustainable low-cost modifier in various composites. However, due to the hydrophobic nature of GTR, it is in compatible with most matrices and results in deterioration in both mechanical and physical properties of composites. This necessitates pre-modification of the powdered rubber to improve the interfacial bonding at the rubber-matric interface. The most common GTR modification research...
-
The influence of time of hearing aid use on auditory perception in various acoustic situations
PublicationThe assessment of sound perception in hearing aids, especially in the context of benefits that a prosthesis can bring, is a complex issue. The objective parameters of the hearing aids can easily be determined. These parameters, however, do not always have a direct and decisive influence on the subjective assessment of quality of the patient’s hearing while using a hearing aid. The paper presents the development of a method for...
-
Generation Balt Generation BALT:Linking maritime education with the changing job market for a new generation of Baltic Sea experts
ProjectsProject realized in Faculty of Ocean Engineering and Ship Technology according to WTPB.01.02.00-56-014/10-00 agreement from 2011-08-25
-
Zarządzanie opóźnieniami w ruchu kolejowym
PublicationZarządzanie opóźnieniami w ruchu kolejowym zostało przedstawione jako wielokryterialny problem optymalizacyjny, do rozwiązania którego został użyty model ogólny (job-shop) szeregowania zadań. W artykule przedstawiono sposób zastosowania trzech algorytmów metaheurystycznych: algorytmu genetycznego (Genetic Algorithm), algorytmu roju (Particle Swarm Optimization) i algorytmu mrówkowego (Ant Colony Optimization) do znalezienia optymalnego...
-
Navigating the complexities of altruistic helping in Nonprofit Organizations: An analysis of Benefits, Burdens and managerial challenges
PublicationWe investigate how individuals cope with side effects of altruistic behaviour at work, i.e. genuine helping behaviour which is not part of any job description, and what role the organizational context plays in these dynamics. Employing simultaneous dyadic interviews, we show how employees of non-profit organizations cope with undesired effects of altruistic help. Our data provides evidence of unintended outcomes for the individual...
-
Data from the Survey on Entrepreneurs’ Opinions on Factors Determining the Employment of the Gdańsk University of Technology Graduates
PublicationThe dataset includes data from a survey on factors determining the employment of the Gdańsk University of Technology (Gdańsk Tech) graduates’ in the opinion of entrepreneurs. The survey was conducted in 2017. The research sample included 102 respondents representing various firms from the Pomeranian Voivodeship, Poland. The study concerned i.a. factors determining the decision to hire a candidate, methods of recruiting employees,...
-
Hydrogen Embrittlement and Oxide Layer E ect in the Cathodically Charged Zircaloy-2
PublicationThe present paper is aimed at determining the less investigated effects of hydrogen uptake on the microstructure and the mechanical behavior of the oxidized Zircaloy-2 alloy. The specimens were oxidized and charged with hydrogen. The different oxidation temperatures and cathodic current densities were applied. The scanning electron microscopy, X-ray electron diffraction spectroscopy, hydrogen absorption assessment, tensile, and...
-
Optimal control at energy performance index of the mobile robots following dynamically created trajectories
PublicationIn practice, the problem of motion control of the wheeled mobile robots is often neglected. Wheeled mobile robots are strongly nonlinear systems and restricted by non-holonomic constraints. Motion control of such systems is not trivial task and usage of non-optimal control signals can lead to deterioration of the overall robot system’s performance. In case of autonomous application of the mobile robots all parts of its control...
-
Reducing the Uncertainty of the Moving Object Location Measurement with the Method of Quasi-Multiple Measurement in GNSS Technology in Symmetrical Arrangement
PublicationThe article presents a solution to the problem of limited accuracy of dynamic measurements performed with GNSS receivers. The proposed measurement method is a response to the needs related to the assessment of the measurement uncertainty of the position of the track axis of the rail transport line. However, the problem of reducing the measurement uncertainty is universal for many different situations where high accuracy of positioning...
-
Multiple Reprocessing of Conductive PLA 3D-Printing Filament: Rheology, Morphology, Thermal and Electrochemical Properties Assessment
PublicationAdditive manufacturing technologies are gaining more and more attention, resulting in the development or modification of 3D printing techniques and dedicated materials. On the other hand, economic and ecological aspects force the industry to develop material recycling strategies. In this work, the multiple reprocessing of a commercially available PLA conductive composite with carbon black filler, dedicated to 3D printing, was investigated....
-
Wave Frequency Effects on Damage Imaging in Adhesive Joints Using Lamb Waves and RMS
PublicationStructural adhesive joints have numerous applications in many fields of industry. The gradual deterioration of adhesive material over time causes a possibility of unexpected failure and the need for non-destructive testing of existing joints. The Lamb wave propagation method is one of the most promising techniques for the damage identification of such connections. The aim of this study was experimental and numerical research on...
-
DETERMINATION OF THE CITY CENTRE. STUDY FOR THE TROJMIASTO AGGLOMERATION
PublicationDetermination of the centre of the city or agglomeration or generally the geographic area is a task which is often undertaken as part of the promotional actions realized by local authorities or directly by inhabitants. Nowadays, especially due to the development and availability of positioning technology and satellite imaging, this job is undertaken within the framework of general didactic tasks and group projects during the study...
-
Education of Logisticians in Poland: Problems and Prospects in Students’ Opinion
PublicationLogistics is one of the key sectors of the Polish economy. Its value reflects not only its own capacity, but also the role it plays in ensuring the proper functioning of the entire economy. The rapid development of the industry and the highest demands on logistics solutions bring to the fore the problem of preparing a new generation of specialists in logistics. That is why the question of compliance to learning expectations of...
-
User experience and user interface (UX/UI) design of Greencoin mobile application.
PublicationThe aim of the Greencoin mobile application is to encourage its users to change their behavior and to act pro-ecologically. The pilot version of the application will operate within the city of Gdańsk. To keep the app’s user base as large as possible, the graphical user interface should be attractive to the broadest possible audience, and the application itself should be easy and fun to use. This work is a continuation of studies...
-
Role of Sports Facilities in the Process of Revitalization of Brownfields
PublicationThe paper gives an evidence that building a large sports facility can generate beneficial urban space transformation and a significant improvement in the dilapidated urban areas. On the basis of theoretical investigations and case studies it can be proved that sports facilities introduced to urban brownfields could be considered one of the best known large scale revitalization methods. Large urban spaces surrounding sport facilities...
-
Factors influencing the selection of the ideal employer
Open Research DataThis dataset contains the results of research that were carried out by the Wrocław University of Science and Technology in March and April 2016, using an anonymous "on-line" questionnaire. 1,320 people took part in the study entitled "My ideal employer" - students and doctoral students of all faculties of the university (including those fields of study...
-
Professional prospects of polish logisticians in the light of the higher education: students’ opinion research.
PublicationThe paper focuses on a topic concerning the students’ professional future. Students more often and more are prepared to leave the labor market. In addition to the ongoing higher education they get their education at a variety of courses and trainings; they increase their skills in workshops or attend internships and practices to become attractive candidates for the job in the eyes of a potential employer. At this point a number...
-
Stress–strain model of lower corroded steel plates of normal strength for fitness-for-purpose analyses
PublicationThis study investigates the mechanical properties of specimens made of normal strength steel subjected to lower marine immersed corrosion degradation levels (below 25 %). The specimens were corroded in laboratory conditions, and only natural factors were controlled to raise the corrosion rate (reaching the level of 1 mm/year). Three different thicknesses of plates made of normal strength of shipbuilding steel are investigated (between...
-
Physical and sealing properties of BaO–Al2O3–SiO2–CaO–V2O5 glasses for solid oxide fuel cell applications
PublicationIn this study, the properties of BaO–Al2O3–SiO2 (SAB) glasses incorporated with CaO and V2O5 as the network modifier and additive, respectively, are evaluated. The electrical resistivities of the glasses decrease upon the addition of CaO but increase upon increasing their V2O5 content because the V5+ species lower the ionic mobility of the glasses. The addition of V2O5 improves the wettability of the glasses on the Crofer 22 APU...
-
Porównanie efektywności biologicznego usuwania związków biogennych w procesach MUCT i A2/O na przykładzie oczyszczalni w Gdańsku
PublicationThis paper presents a comparison of the efficiency of nutrient removal in two different technological systems functioning in WWTP in Gdansk. The upgrade was necessary in order to adjust the parameters of wastewater treatment to more stringent requirements for Total Nitrogen removal (Total Nitrogen concentration < 10 mg/L). Since 2012 the biological treatment line has operated based on modified A2/O process instead of MUCT process....
-
How Specific Can We Be with k-NN Classifier?
PublicationThis paper discusses the possibility of designing a two stage classifier for large-scale hierarchical and multilabel text classification task, that will be a compromise between two common approaches to this task. First of it is called big-bang, where there is only one classifier that aims to do all the job at once. Top-down approach is the second popular option, in which at each node of categories’ hierarchy, there is a flat classifier...
-
The assessment of solar photovoltaic in Poland: the photovoltaics potential, perspectives and development
PublicationThe following article explains the current condition of the photovoltaics sector both in Poland and worldwide. Recently, a rapid development of solar energy has been observed in Poland and is estimated that the country now has about 700,000 photovoltaics prosumers. In October 2021, the total photovoltaics power in Poland amounted to nearly 5.7 GW. The calculated technical potential of photovoltaics in Poland is 153.484 PJ (42.634...
-
Method of evaluation of lubricating ability of lube oils and fuels in energetistic formulation
PublicationThe paper presents an interpretation of operation of a boundary layer of a lubricating medium. A model of the homogeneous Poisson process has been proposed to assess the deterioration process of the layer's operation. The assessment considers the original interpretation of operation of a boundary layer, as a lubricity measure of a boundary layer of any lubricant. In the submitted proposal the operation of a boundary layer is understood...
-
The influence of chemical composition of amide block on the thermal properties and structure of terpoly(ester-b-ether-b-amide) elastomers
PublicationMultiblock terpolymers-(PBT-b-PTMO-b-PA12,10)(n)- constituting the polymer systems, in which one of the three blocks (PBT) does not dissolve in PA12,10 block (hard phase) and, depending on its molecular weight is slightly soluble in PTMO block (soft phase), have been obtained. The DSC method was applied to investigate the thermal properties of these polymers and it was found that PBT block acts as an element that produces stiffness...
-
Occurrence and properties of sulphate reducing bacteria in groundwater in Gdańsk region; Selected methods of elimination.Bakterie redukujące siarczany na ujęciach wód podziemnych w regionie gdańskim.
PublicationGdańsk region is situated in the area with good hydrogeological conditions. The ground-water designed for drinking purposes is taken mainly from the Quaternary and addition-ally from Cretaceous aquifers. The urban development and intensive take off have caused the increase of water exploitation and as a consequence of the changes of hydrogeological conditions the deterioration of chemical and bacteriological quality of water has...
-
Caring for Children with Dravet Syndrome: Exploring the Daily Challenges of Family Caregivers
PublicationWhile Polish studies focus on the symptoms, causes and treatment of people suffering from Dravet syndrome (DS), much less is known about the situation of the family caregivers of DS children. This study was designed to explore the experiences, daily challenges and needs related to caring for DS children. An anonymous self-administered online questionnaire was developed. Thesurvey was completed by 75 family caregivers affiliated...
-
Static Shunt PE Voltage-Quality Controllers
PublicationThis chapter focuses on power electronics (PE)-based solutions used in distribution networks for reduction of supply-voltage-quality deterioration, from long interruptions to the harmonics. Various PE devices and their combinations are addressed for particular or a range of voltage disturbances. A particular solution is applied taking into account demands for voltage quality and network configuration. In general, there are three...
-
Static Series and Shunt-series PE Voltage-quality Controllers
PublicationAs presented in the Chap. 7 static shunt power electronics (PE) voltage-quality controllers protect the utility electrical system from the unfavorable impact of customer loads. Shunt controllers, as shown in Chap. 6, are recommended mainly for mitigation of the causes of disturbances, and not their effects in distanced nodes of a power-electronics system. In the case when reduction of disturbances effects is required, which leads...
-
Biomarkers of alcohol consumption in body fluids - possibilities and limitations of application in toxicological analysis
PublicationEthyl alcohol is the most popular legal drug, but its excessive consumption causes social problems. Despite many public campaigns against alcohol use, car accidents, instances of aggressive behaviour, sexual assaults and deterioration in labor productivity caused by inebriated people is still commonplace. Fast and easy diagnosis of alcohol consumption is required in order to introduce proper and effective therapy, and is crucial...
-
Interrelationship between total volatile organic compounds emissions, structure and properties of natural rubber/polycaprolactone bio-blends cross-linked with peroxides
PublicationNatural rubber/polycaprolactone (NR/PCL) bio-based blends with different organic peroxides were prepared using an internal batch mixer and subsequently cross-linked at 170°C. Two types of commonly used organic peroxides, dicumyl peroxide and di(tert-butylperoxyisopropyl)benzene peroxide, were applied as free-radical initiator. Cross-linking efficiency of NR/PCL blends were investigated using oscillating disc rheometer measurements,...
-
The Proposal to “Snapshot” Raim Method for Gnss Vessel Receivers Working in Poor Space Segment Geometry
PublicationNowadays, we can observe an increase in research on the use of small unmanned autonomous vessel (SUAV) to patrol and guiding critical areas including harbours. The proposal to “snapshot” RAIM (Receiver Autonomous Integrity Monitoring) method for GNSS receivers mounted on SUAV operating in poor space segment geometry is presented in the paper. Existing “snapshot” RAIM methods and algorithms which are used in practical applications...
-
Własności kwantowe przemian energetycznych zachodzących w silnikach o zapłonie samoczynnym = Quantum properties of energy transformation in diesel engines
PublicationW pracy uzasadniono, że w badaniach własności energetycznych silników spalinowych o zapłonie samoczynnym należy uwzględnić istniejącą w ich eksploatacji przypadkowość i nieprzewidywalność zdarzeń. Nawiązano do osiągnięć mechaniki kwantowej wskazując na wynikający z nich postulat, że wielkości nazywane komplementarnymi, mają istotną własność, która polega na tym, że niemożliwy jest jednoczesny i zarazem dokładny pomiar ich wartości....
-
The Importance of Demand and Environment for Defining and Establishing the Role of Data Stewards
PublicationData stewardship is now a central part of FAIR research data management. Although various types of positions called data stewards have been created at academic institutions over the last years, no demand-oriented, formal model of data stewardship and the associated roles exist so far. This workshop report presents the outcomes of the panel discussion “The Importance of Demand and Environment for Defining Data Stewardship” held...
-
IMPROVING THE QUALITY OF EDUCATION THROUGH THE IMPLEMENTATION OF THE DIPLOMAS AND GROUP PROJECTS DURING ENGINEERING STUDIES IN COOPERATION WITH EMPLOYERS
PublicationThe quality of education is one of the most important factors determining the job opportunity for graduates. The authors present the possibility of carrying out the diplomas in cooperation with employers and institutions interested in employment of students who graduated Gdansk University of Technology, Faculty of Civil and Environmental Engineering and University of Warmia and Mazury, Faculty of Geodesy and Land Management (major:...
-
POSITIVE PSYCHOLOGICAL CAPITAL ENHANCES THRIVING IN THE MULTICULTURAL WORK ENVIRONMENT OF MULTINATIONAL CORPORATIONS
PublicationThe aim of the paper is to examine positive psychological capital (PsyCap) as well as individual factors in the relationship with thriving in the multicultural work environment of multinational corporations (MNCs). We conducted a quantitative study on the sample of 127 individuals from subsidiaries of various MNCs located in Poland and involved in intercultural interactions. The results of cross-sectional study show that employees...
-
Spurious Modes in Model Order Reduction in Variational Problems in Electromagnetics
PublicationIn this work, we address an everlasting issue in 2 model order reduction (MOR) in electromagnetics that has 3 remained unnoticed until now. Contrary to what has been 4 previously done, we identify for the very first time spurious 5 modes in MOR for time-harmonic Maxwell’s equations and 6 propose a methodology to remove their negative influence on the 7 reduced order model (ROM) response. These spurious modes 8 have nonzero resonance...
-
Mechanical Properties, Microstructure and Surface Quality of Polypropylene Green Composites as a Function of Sunflower Husk Waste Filler Particle Size and Content
PublicationAgricultural waste is a still untapped source of materials that can, in case of proper utilization, significantly improve the sustainability of polymers and their composites. In this work, polymer composites based on isotactic polypropylene were produced incorporating ground sunflower husk in the amount of 10 wt% and 20 wt%. The work’s main objective is to evaluate how preliminary fractioning of this agricultural waste filler affects...
-
Rotational molding of polylactide (PLA) composites filled with copper slag as a waste filler from metallurgical industry
PublicationThe research work carried out so far indicates the ever wider possibilities and demand for shaping composite products in the rotational molding technology. This trend was the main reason to use waste-based filler from the metallurgical process as a filler for manufacturing polylactide (PLA)-based remolded composites. Copper slag (CS) was introduced in the single-step processing method to PLA matrix at 5, 10, 20, and 35 wt%. The...
-
Circular saw vibrations or dynamics of the spindle
PublicationSawing of wood with circular saws is a typical example of cutting with multi-blade tools. In that kind of cutting, theposition accuracy of following tool blades is a crucial factor which affects the cutting process and machining final effects.Position tooth errors may cause deterioration in cutting conditions, changes in loads of individual teeth and the tool as a whole,and also a decrease in accuracy and surface quality after...
-
Metodyka badań rozwojowych nowego typu silników i pomp satelitowych
PublicationResearch and development of new type satellite motors and satellite pumps SM with small geometrical displacement, from 5 to 73 cm3/rev, has been conducted in cooperation with Stosowanie Maszyn company from Katowice (manufacturer of motors and pump SM). The improvement of construction of those machines, especially construction of axial compensation and construction of fluid distribution channels have been the main problem of research...
-
Schottky Junction-Driven Photocatalytic Effect in Boron-Doped Diamond-Graphene Core–Shell Nanoarchitectures: An sp3/sp2 Framework for Environmental Remediation
PublicationSelf-formation of boron-doped diamond (BDD)-multilayer graphene (MLG) core–shell nanowalls (BDGNWs) via microwave plasma-enhanced chemical vapor deposition is systematically investigated. Here, the incorporation of nitrogen brings out the origin of MLG shells encapsulating the diamond core, resulting in unique sp3/sp2 hybridized frameworks. The evolution mechanism of the nanowall-like morphology with the BDD-MLG core–shell composition...