• The structure of strontium–borate glass-ceramics containing crystalites of Bi2VO5.5. measured with X-ray diffraction and SEM methods

  Dane Badawcze

  • N. Wójcik
  • J. Ryl
  • M. Gazda
  • J. Karczewski

  The structure of strontium–borate  glass-ceramics containing Bi2VO5.5 crystallites was measured by XRD and SEM. 

• The structure of strontium–borate glasses and glass-ceramics containing nanocrystallites of Bi2VO5.5. measured with X-ray diffraction method

  Dane Badawcze

  • N. Wójcik
  • J. Ryl
  • M. Gazda

  The structure of strontium–borate glasses and glass-ceramics containing Bi2VO5.5 nanocrystallites was measured by XRD. 

• The structure of 70(2Bi2O3-V2O5) - 30SrBO7 measured with X-ray diffraction and SEM methods

  Dane Badawcze

  • N. Wójcik
  • J. Ryl
  • M. Gazda
  • J. Karczewski

  The structure changes of 70(2Bi2O3-V2O5)-30SrB4O7 glass occurred during increase in temperature was measured by XRD and SEM. 

• The structure of Bi2VO5.5 ceramic prepared by 3 different ways measured with X-ray diffraction

  Dane Badawcze

  • N. Wójcik
  • J. Ryl
  • M. Gazda

  The structure of Bi2VO5.5 ceramics was measured by XRD. 

• The topography of Bi2VO5.5 ceramic measured with SEM and confocal microscope

  Dane Badawcze

  • N. Wójcik
  • J. Ryl
  • J. Karczewski

  The topography of Bi2VO5.5 ceramics was measured by SEM and confocal microscope.

• The topography of strontium–borate glasses and glass-ceramics containing bismuth and vanadium oxides measured with SEM method

  Dane Badawcze

  • N. Wójcik
  • J. Ryl
  • M. Gazda

  The topography of strontium–borate glasses and glass-ceramics containing bismuth and vanadium oxides was measured by SEM. 

• The topography of Bi2VO5.5 ceramics prepared by melt-quenching technique was measured with confocal microscope

  Dane Badawcze

  • N. Wójcik
  • J. Ryl

  The topography of Bi2VO5.5 ceramics prepared by melt-quenching technique was measured by confocal microscope. 

• The topography of as-quenched and heat treated 50(2Bi2O3-V2O5)-50SrB4O7 and 50Bi2VO5.5-50SrB4O7 glasses measured with confocal microscope

  Dane Badawcze

  • N. Wójcik
  • J. Ryl

  The topography of as-quenched and heat treated 50(2Bi2O3-V2O5)-50SrB4O7 and 50Bi2VO5.5-50SrB4O7 glasses measured with confocal microscope.

• The topography of as-quenched and heat treated 50(2Bi2O3-V2O5)-50SrB4O7 and 50Bi2VO5.5-50SrB4O7 glasses measured with AFM

  Dane Badawcze

  • N. Wójcik
  • J. Ryl
  • J. Karczewski

  The topography of as-quenched and heat treated 50(2Bi2O3-V2O5)-50SrB4O7 and 50Bi2VO5.5-50SrB4O7 glasses measured with AFM.

• The topography of as-quenched and heat treated 58(2Bi2O3-V2O5)-42SrB4O7 glasses measured with confocal microscope

  Dane Badawcze

  • N. Wójcik
  • J. Ryl

  The topography of as-quenched and heat treated 58(2Bi2O3-V2O5)-42SrB4O7 glasses measured with confocal microscope.

• The topography of strontium–borate glasses and glass-ceramics containing nanocrystallites of Bi2VO5.5. measured with SEM method

  Dane Badawcze

  • N. Wójcik
  • J. Ryl
  • J. Karczewski

  The topography of strontium–borate glasses and glass-ceramics containing nanocrystallites of Bi2VO5.5. was measured by SEM. 

• The structure of strontium–borate glasses and glass-ceramics containing bismuth and vanadium oxides measured with X-ray diffraction method

  Dane Badawcze

  • N. Wójcik
  • J. Ryl
  • M. Gazda

  The structure of strontium–borate glasses and glass-ceramics containing bismuth and vanadium oxides was measured by XRD. 

• High temperature linear impedance of 35P2O5-30Fe2O3-25Nb2O5-15TiO2

  Dane Badawcze

  • N. Wójcik
  • J. Ryl
  • A. Lenarciak
  • R. Barczyński

  The high temperature electrical properties of phosphate-iron glasses containing niobium and titanium were investigated. Glass samples of the composition of 35P2O5-30Fe2O3-20Nb2O5-15TiO2 (in %mol) were prepared by the conventional melt quenching technique. Appropriate amounts of reagents ((NH4)2HPO4 (≥99.9%, POCH), Fe2O3 (≥99.9%, POCH), Nb2O5 (≥99.9%,...

• Nonlinear high temperature impedance of 35P2O5-30Fe2O3-35Nb2O5 glass

  Dane Badawcze

  • N. Wójcik
  • R. Barczyński
  • J. Ryl
  • A. Lenarciak

  The nonlinear high temperature impedance of iron- phosphate glasses doped with niobium oxide was measured.  Glass samples of the composition of 35P2O5-30Fe2O3-35Nb2O5 (in %mol) were prepared by the conventional melt quenching technique. Appropriate amounts of reagents ((NH4)2HPO4 (≥99.9%, POCH), Fe2O3 (≥99.9%, POCH) and Nb2O5 (≥99.9%, PLUKA AG) were...

• Nonlinear high temperature impedance of 35P2O5-30Fe2O3-27.5Nb2O5-7.5TiO2 glass

  Dane Badawcze

  • N. Wójcik
  • R. Barczyński
  • J. Ryl
  • A. Lenarciak

  The nonlinear high temperature impedance of iron- phosphate glasses doped with niobium oxide was measured.  Glass samples of the composition of 35P2O5-30Fe2O3-27.5Nb2O5-7.5TiO2 (in %mol) were prepared by the conventional melt quenching technique. Appropriate amounts of reagents ((NH4)2HPO4 (≥99.9%, POCH), Fe2O3 (≥99.9%, POCH), Nb2O5 (≥99.9%, PLUKA AG)...

• High temperature linear impedance of 35P2O5-30Fe2O3-27.5Nb2O5-7.5TiO2

  Dane Badawcze

  • N. Wójcik
  • J. Ryl
  • A. Lenarciak
  • R. Barczyński

  The high temperature electrical properties of phosphate-iron glasses containing niobium were investigated. Glass samples of the composition of 35P2O5-30Fe2O3-27.5Nb2O5-7.5TiO2 (in %mol) were prepared by the conventional melt quenching technique. Appropriate amounts of reagents ((NH4)2HPO4 (≥99.9%, POCH), Fe2O3 (≥99.9%, POCH), Nb2O5 (≥99.9%, PLUKA AG)...

• High temperature linear impedance of 35P2O5-30Fe2O3-35Nb2O5

  Dane Badawcze

  • N. Wójcik
  • J. Ryl
  • A. Lenarciak
  • R. Barczyński

  The high temperature electrical properties of phosphate-iron glasses containing niobium were investigated. Glass samples of the composition of 35P2O5-30Fe2O3-35Nb2O5 (in %mol) were prepared by the conventional melt quenching technique. Appropriate amounts of reagents ((NH4)2HPO4 (≥99.9%, POCH), Fe2O3 (≥99.9%, POCH), Nb2O5 (≥99.9%, PLUKA AG) and TiO2...

• Linear impedance of 35P2O5-30Fe2O3-20Nb2O5-15TiO2

  Dane Badawcze

  • N. Wójcik
  • J. Ryl
  • A. Lenarciak
  • R. Barczyński

  The electrical properties of phosphate-iron glasses containing niobium and titanium were investigated. Glass samples of the composition of 35P2O5-30Fe2O3-20Nb2O5-15TiO2 (in %mol) were prepared by the conventional melt quenching technique. Appropriate amounts of reagents ((NH4)2HPO4 (≥99.9%, POCH), Fe2O3 (≥99.9%, POCH), Nb2O5 (≥99.9%, PLUKA AG) and TiO2...

• Linear impedance of 35P2O5-30Fe2O3-27.5Nb2O5-7.5TiO2

  Dane Badawcze

  • N. Wójcik
  • J. Ryl
  • A. Lenarciak
  • R. Barczyński

  The electrical properties of phosphate-iron glasses containing niobium and titanium were investigated. Glass samples of the composition of 35P2O5-30Fe2O3-27.5Nb2O5-7.5TiO2 (in %mol) were prepared by the conventional melt quenching technique. Appropriate amounts of reagents ((NH4)2HPO4 (≥99.9%, POCH), Fe2O3 (≥99.9%, POCH), Nb2O5 (≥99.9%, PLUKA AG) and...

• Linear impedance of 35P2O5-30Fe2O3-35Nb2O5

  Dane Badawcze

  • N. Wójcik
  • J. Ryl
  • A. Lenarciak
  • R. Barczyński

  The electrical properties of phosphate-iron glasses containing niobium were investigated. Glass samples of the composition of 35P2O5-30Fe2O3-35Nb2O5 (in %mol) were prepared by the conventional melt quenching technique. Appropriate amounts of reagents ((NH4)2HPO4 (≥99.9%, POCH), Fe2O3 (≥99.9%, POCH), Nb2O5 (≥99.9%, PLUKA AG) and TiO2 (≥99.9%, anatase...

• Topography of iron-phosphate glasses doped with niobium and titanium tested by confocal microscope

  Dane Badawcze

  • N. Wójcik
  • J. Ryl
  • A. Lenarciak

  The topography of phosphate-iron glasses containing niobium and titanium were investigated with the use of confocal miscroscope. Glass samples of the composition of 35P2O5-30Fe2O3-35Nb2O5, 35P2O5-30Fe2O3-27.5Nb2O5-7.5TiO2 and 35P2O5-30Fe2O3-20Nb2O5-15TiO2  (in %mol) were prepared by the conventional melt quenching technique. Appropriate amounts of reagents...

• Topography of barium-vanadate glasses

  Dane Badawcze

  • N. Wójcik
  • J. Ryl

  The topography of barium-vanadate glasses was measured. Samples of the composition of xBaO-(100-x)V2O5 where x= 30, 40 and 45 (in %mol) were prepared by the conventional melt quenching technique. Appropriate amounts of reagents: BaO (≥99.9%, P.P.H STANLAB Sp.J.) and V2O5 (≥99.9%, POCH) were thoroughly mixed in an agate mortar. The melting was performed...

• Nonlinear impedance of vanadate glass-ceramics containing BaTiO3

  Dane Badawcze

  • N. Wójcik
  • R. Barczyński
  • J. Ryl

  The nonlinear impedance of vanadate glasses doped with BaTiO3 was measured. Samples of the composition of x[BaO,TiO2]–(80 − x)V2O5–20Bi2O3 where x = 5, 10 and 15 in mol% were prepared by a conventional melt quenching technique. The melting was performed in alumina crucibles at the temperature of 1273 K–1373 K. The melts were poured on a preheated (573...

• Microstructure of barium-vanadate glasses

  Dane Badawcze

  • N. Wójcik
  • J. Ryl
  • J. Karczewski
  • M. Gazda

  The structure of barium-vanadate glasses was measured by SEM and XRD techniques. Samples of the composition of xBaO-(100-x)V2O5 where x= 30, 40 and 45 (in %mol) were prepared by the conventional melt quenching technique. Appropriate amounts of reagents: BaO (≥99.9%, P.P.H STANLAB Sp.J.) and V2O5 (≥99.9%, POCH) were thoroughly mixed in an agate mortar....

• Dielectric properties of barium-vanadate glasses

  Dane Badawcze

  • N. Wójcik
  • J. Ryl
  • R. Barczyński

  The linear impedance of barium-vanadate glasses was measured. Samples of the composition of xBaO-(100-x)V2O5 where x= 30, 40 and 45 (in %mol) were prepared by the conventional melt quenching technique. Appropriate amounts of reagents: BaO (≥99.9%, P.P.H STANLAB Sp.J.) and V2O5 (≥99.9%, POCH) were thoroughly mixed in an agate mortar. The melting was...

• Topography and microstructure of phosphate-iron glasses containing niobium and titanium

  Dane Badawcze

  • N. Wójcik
  • J. Ryl
  • J. Karczewski
  • M. Gazda

  The topography and microstructure of phosphate-iron glasses containing niobium and titanium were investigated by the means of X-ray diffraction (XRD), scanning electron microscopy (SEM). Glass samples of the composition of 35P2O5-30Fe2O3-(35-x)Nb2O5-xTiO2 where x= 0; 7.5 and 15 (in %mol) were prepared by the conventional melt quenching technique. Appropriate...

• The morphology of vanadate glass-ceramics containing BaTiO3 measured with the use of AFM

  Dane Badawcze

  • N. Wójcik
  • J. Ryl
  • J. Karczewski

  The structure of vanadate glass-ceramics doped with BaTiO3 was measured by AFM technique. Samples of the composition of x[BaO,TiO2]–(80 − x)V2O5–20Bi2O3 where x = 5, 10 and 15 in mol% were prepared by a conventional melt quenching technique. The melting was performed in alumina crucibles at the temperature of 1273 K–1373 K. The melts were poured on...

• The morphology of vanadate glasses containing BaTiO3 measured with the use of AFM

  Dane Badawcze

  • N. Wójcik
  • J. Ryl
  • J. Karczewski

  The morphology of vanadate glasses doped with BaTiO3 was measured with the use of AFM method. Samples of the composition of x[BaO,TiO2]–(80 − x)V2O5–20Bi2O3 where x = 5, 10 and 15 in mol% were prepared by a conventional melt quenching technique. The melting was performed in alumina crucibles at the temperature of 1273 K–1373 K. The melts were poured...

• Nonlinear impedance of vanadate glasses containing BaTiO3

  Dane Badawcze

  • N. Wójcik
  • R. Barczyński
  • J. Ryl

  The nonlinear impedance of vanadate glasses doped with BaTiO3 was measured. Samples of the composition of x[BaO,TiO2]–(80 − x)V2O5–20Bi2O3 where x = 5, 10 and 15 in mol% were prepared by a conventional melt quenching technique. The melting was performed in alumina crucibles at the temperature of 1273 K–1373 K. The melts were poured on a preheated (573...

• The structure of vanadate glass-ceramics containing BaTiO3 measured with X-ray diffraction method

  Dane Badawcze

  • N. Wójcik
  • J. Ryl
  • M. Gazda

  The structure of vanadate glass-ceramics doped with BaTiO3 was measured by XRD. Samples of the composition of x[BaO,TiO2]–(80 − x)V2O5–20Bi2O3 where x = 5, 10 and 15 in mol% were prepared by a conventional melt quenching technique. The melting was performed in alumina crucibles at the temperature of 1273 K–1373 K. The melts were poured on a preheated...

• The structure of vanadate glass-ceramics containing BaTiO3.

  Dane Badawcze

  • N. Wójcik
  • J. Ryl
  • J. Karczewski

  The structure of vanadate glass-ceramics doped with BaTiO3 was measured by SEM technique. Samples of the composition of x[BaO,TiO2]–(80 − x)V2O5–20Bi2O3 where x = 5, 10 and 15 in mol% were prepared by a conventional melt quenching technique. The melting was performed in alumina crucibles at the temperature of 1273 K–1373 K. The melts were poured on...

• The structure of vanadate glasses containing BaTiO3.

  Dane Badawcze

  • N. Wójcik
  • J. Ryl
  • J. Karczewski

  The structure of vanadate glasses doped with BaTiO3 was measured by SEM technique. Samples of the composition of x[BaO,TiO2]–(80 − x)V2O5–20Bi2O3 where x = 5, 10 and 15 in mol% were prepared by a conventional melt quenching technique. The melting was performed in alumina crucibles at the temperature of 1273 K–1373 K. The melts were poured on a preheated...

• The morphology of vanadate glass-ceramics containing BaTiO3

  Dane Badawcze

  • N. Wójcik
  • J. Ryl

  The morphology of vanadate glass-ceramic doped with BaTiO3 was measured. Samples of the composition of x[BaO,TiO2]–(80 − x)V2O5–20Bi2O3 where x = 5, 10 and 15 in mol% were prepared by a conventional melt quenching technique. The melting was performed in alumina crucibles at the temperature of 1273 K–1373 K. The melts were poured on a preheated (573...

• The morphology of vanadate glasses containing BaTiO3

  Dane Badawcze

  • N. Wójcik
  • J. Ryl

  The morphology of vanadate glasses doped with BaTiO3 was measured. Samples of the composition of x[BaO,TiO2]–(80 − x)V2O5–20Bi2O3 where x = 5, 10 and 15 in mol% were prepared by a conventional melt quenching technique. The melting was performed in alumina crucibles at the temperature of 1273 K–1373 K. The melts were poured on a preheated (573 K) brass...

• Linear impedance of vanadate glass-ceramics containing BaTiO3

  Dane Badawcze

  • N. Wójcik
  • R. Barczyński
  • J. Ryl

  The linear impedance of vanadate glass-ceramics containing BaTiO3 was measured. Samples of the composition of x[BaO,TiO2]–(80 − x)V2O5–20Bi2O3 where x = 5, 10 and 15 in mol% were prepared by a conventional melt quenching technique. The melting was performed in alumina crucibles at the temperature of 1273 K–1373 K. The melts were poured on a preheated...

• Linear impedance of vanadate glasses containing BaTiO3

  Dane Badawcze

  • N. Wójcik
  • R. Barczyński
  • J. Ryl

  The linear impedance of vanadate glasses doped with BaTiO3 was measured. Samples of the composition of x[BaO,TiO2]–(80 − x)V2O5–20Bi2O3 where x = 5, 10 and 15 in mol% were prepared by a conventional melt quenching technique. The melting was performed in alumina crucibles at the temperature of 1273 K–1373 K. The melts were poured on a preheated (573...

• The structure of lead-silicate glasses and nanocomposites doped with iron oxide

  Dane Badawcze

  • N. Wójcik
  • J. Ryl
  • M. Gazda

  The structure of iron-doped glasses and glass-ceramics were studied. Samples has the composition of  50SiO2–(50−x)PbO–xFe2O3, where x=15, 20 and 25 (in mol%). All samples were prepared by the conventional melt quenching technique; the melting was conducted in air at 1623 K in alumina crucibles. The melts were poured on a brass plate preheated to 573...

• The structure of lead-silicate glasses containing nanocrystallites of iron oxides

  Dane Badawcze

  • N. Wójcik
  • J. Ryl
  • M. Gazda

  The structure of iron-doped glasses and glass-ceramics were studied. Samples has the composition of  (50 − 0.5x)SiO2–(50 − 0.5x)PbO–xFe2O3, where x = 2, 5, 10, 15, 20 and 25 (in mol%). All samples were prepared by the conventional melt quenching technique; the melting was conducted in air at 1623 K in alumina crucibles. The melts were poured on a brass...

• The structure of lead-borate glasses containing nanocrystallites of iron oxides

  Dane Badawcze

  • N. Wójcik
  • J. Ryl
  • M. Gazda

  The structure of iron-doped glasses and glass-ceramics were studied. Glass samples of composition of xFe2O3–(100 − x)(B2O3–2PbO) (2.5 b x b 37, in mol%) were prepared by the conventional melt quenching technique. The melting was conducted in alumina crucibles at the temperature of 1523 K. The melts were poured on a preheated (573 K) brass plate and...

• The morphology of lead-borate glasses and nanocomposites doped with iron oxide

  Dane Badawcze

  • N. Wójcik
  • J. Karczewski
  • J. Ryl

  The topography of iron-doped borate glasses and glass-ceramics were studied. Samples of composition of xFe2O3–(100 − x)(B2O3–2PbO) (2.5 < x < 37 in mol%) were prepared by the conventional meltquenching technique. The melting was conducted in alumina crucibles at the temperature of 1523 K. The melts were poured on a preheated (573 K) brass plate...

• Magnetic properties of of lead-silicate glasses and nanocomposites doped with iron oxide

  Dane Badawcze

  • N. Wójcik
  • J. Karczewski
  • J. Ryl

  Magnetic properties of iron-doped glasses and glass-ceramics were studied. Two different sets of glass samples were prepared. The first group of samples has the composition of (50 − 0.5x)SiO2–(50 − 0.5x)PbO– xFe2O3, where x = 15 and 20 (in mol%). Composition of the second group was 50SiO2–(50−x)PbO–xFe2O3, where x=15, 20 and 25 (in mol%). All sampleswere...

• Electrical properties of nanostructures in lead-silicate glasses and nanocomposites doped with iron oxide

  Dane Badawcze

  • N. Wójcik
  • J. Karczewski
  • J. Ryl

  Electrical properties of iron oxide nanostructures observed in silicate glasses and glass-ceramics were studied. Two different sets of glass samples were prepared. The first group of samples has the composition of (50 − 0.5x)SiO2–(50 − 0.5x)PbO– xFe2O3, where x = 15, 20 and 25 (in mol%). Composition of the second group was 50SiO2–(50−x)PbO–xFe2O3, where...

• The morphology of lead-silicate glasses and nanocomposites doped with iron oxide

  Dane Badawcze

  • N. Wójcik
  • J. Karczewski
  • J. Ryl

  The topography of iron-doped glasses and glass-ceramics were studied. Samples has the composition of  50SiO2–(50−x)PbO–xFe2O3, where x=15, 20 and 25 (in mol%). All sampleswere prepared by the conventional melt quenching technique; the melting was conducted in air at 1623 K in alumina crucibles. The melts were poured on a brass plate preheated to 573...

• The morphology of lead-silicate glasses containing nanocrystallites of iron oxides

  Dane Badawcze

  • N. Wójcik
  • J. Karczewski
  • J. Ryl

  The topography of iron-doped glasses and glass-ceramics were studied. Samples has the composition of  (50 − 0.5x)SiO2–(50 − 0.5x)PbO–xFe2O3, where x = 2, 5, 10, 15, 20 and 25 (in mol%). All sampleswere prepared by the conventional melt quenching technique; the melting was conducted in air at 1623 K in alumina crucibles. The melts were poured on a brass...

• Electrical properties of lead-borate glasses and glass-ceramics containing iron ions

  Dane Badawcze

  • N. Wójcik
  • R. Barczyński
  • J. Ryl

  Electrical properties were studied for borate-lead glasses and glass-ceramics doped with iron ions. Glass samples of composition of xFe2O3–(100 − x)(B2O3–2PbO) (2.5 b x b 37, in mol%) were prepared by the conventional melt quenching technique. The melting was conducted in alumina crucibles at the temperature of 1523 K. The melts were poured on a preheated...

• Linear and nonlinear impedance of alkali and iron doped silicate-lead glasses

  Dane Badawcze

  • N. Wójcik
  • R. Barczyński
  • J. Ryl

  Linear and nonlinear impedance was studied for lead-silicate glass samples doped with iron ions and alkaline oxides. The compositions of glasses were as follows: (in %mol) 50% SiO2, 25% PbO, 15% Fe2O3 and 15% one of alkaline oxides: Na2O, K2O, Li2O. All samples were prepared by the conventional melt quenching technique. The substrates were powdered...

• Electrical properties of silicate-lead glasses containing nanostructures of iron oxides.

  Dane Badawcze

  • N. Wójcik
  • R. Barczyński
  • J. Ryl

  Electrical properties of silicate-lead glasses doped with different content of iron oxide was studied. The set of glass samples were prepared with the composition of (50 − 0.5x)SiO2–(50 − 0.5x)PbO–xFe2O3, where x = 2, 5, 10, 15, 20 and 25 (in mol%).  All sampleswere prepared by the conventional melt quenching technique; the melting was conducted in...

• Linear and nonlinear impedance of iron containing silicate glasses

  Dane Badawcze

  • N. Wójcik
  • R. Barczyński
  • J. Ryl

  The linear and nonlinear impedance ofglasses doped with iron oxide were measured. Glass samples (50 SiO2-50-xPbO-xFe2O3 in mol%) were prepared by the conventional melt quenching technique. The substrates were powdered in a mortar and melted in Al2O3 crucibles. The melting was conducted in air at 1623K. The melts were poured out on plate heated up to...

• The Mott-Schottky characteristics of microwave pulsed-plasma polymerized allylamine by DEIS analysis

  Dane Badawcze

  • J. Ryl

  The dataset contains the results obtained for the Mott-Schottky analysis of the microwave pulsed-plasma polymerized allylamine using the multifrequency perturbation signal with Dynamic Electrochemical Impedance Spectroscopy (DEIS) technique. The results were obtained using the perturbation composed of the elementary signals with a frequency range between...

• The microstructure of AA5754 alloy under corrosion in alkaline media (pH=11) with 4.5 mM of various carboxylic acids

  Dane Badawcze

  • J. Ryl
  • J. Wysocka
  • S. Krakowiak

  This dataset contains scanning electron microscopy (SEM) micrographs taken for polished aluminum AA5754 alloy samples, exposed for 100 min in bicarbonate buffer (pH=11) with the addition of 4.5 mM of carboxylic acids, namely: citric acid, malic acid, maleic acid, succinic acid, tartaric acid, tricarballylic acid and serine. The goal of this study was...