Catalog Publications
Publications starting with: M clear
Filters
total: 4509
displaying 1000 best results Help
Catalog Publications
Year 2020
-
Microencapsulation of fish oil – determination of optimal wall material and encapsulation methodology
PublicationFor the first time, we present a meta-analysis of experimental and literature data to determine which microencapsulation methodology, and which wall material are best suited to protect fish oil. Our analysis covered a period of several decades of research (1984–2018). The analysis was conducted on 196 literature data-points, and 16 data-points determined experimentally for this publication. PLS regression was used to determine...
-
Microscale diamond protection for a ZnO coated fiber optic sensor
PublicationFiber optic sensors are widely used in environmental, biological and chemical sensing. Due to the demanding environmental conditions in which they can be used, there is a risk of damaging the sensor measurement head placed in the measuring field. Sensors using nanolayers deposited upon the fiber structure are particularly vulnerable to damage. A thin film placed on the surface of the fiber end-face can be prone to mechanical damage...
-
Microscopic traffic simulation models for connected and automated vehicles (CAVs) – state-of-the-art
PublicationResearch on connected and automated vehicles (CAVs) has been gaining substantial momentum in recent years. However, thevast amount of literature sources results in a wide range of applied tools and datasets, assumed methodology to investigate thepotential impacts of future CAVs traffic, and, consequently, differences in the obtained findings. This limits the scope of theircomparability and applicability and calls for a proper standardization...
-
Microstructure and Mechanical Properties of Carboxylated Nitrile Butadiene Rubber/Epoxy/XNBR-grafted Halloysite Nanotubes Nanocomposites
PublicationThe effect of various amounts of carboxylated nitrile butadiene rubber (XNBR) functionalized halloysite nanotubes (XHNTs) on the cure characteristics, mechanical and swelling behavior of XNBR/epoxy compounds was experimentally and theoretically investigated. The morphology of the prepared XNBR/epoxy/XHNTs nanocomposites was imaged using scanning electron microscopy (SEM). The effects of various XNBR-grafted nanotubes on the damping...
-
Microstructure–Property Relationship of Polyurethane Foams Modified with Baltic Sea Biomass: Microcomputed Tomography vs. Scanning Electron Microscopy
Publication -
Microstructure–Property Relationship of Polyurethane Foams Modified with Baltic Sea Biomass: Microcomputed Tomography vs. Scanning Electron Microscopy
PublicationIn this paper, novel rigid polyurethane foams modified with Baltic Sea biomass were compared with traditional petro-based polyurethane foam as reference sample. A special attention was focused on complex studies of microstructure, which was visualized and measured in 3D with high-resolution microcomputed tomography (microCT) and, as commonly applied for this purpose, scanning electron microscopy (SEM). The impact of pore volume,...
-
Microwave-assisted synthesis of a TiO2-CuO heterojunction with enhanced photocatalytic activity against tetracycline
PublicationA microwave method was used for the synthesis of TiO2-CuO oxide systems. A detailed investigation was made of the effect of the molar ratio of components (TiO2:CuO=9:1, 7:3, 5:5, 3:7, 1:9) on the crystalline structure and morphology. Transmission electron microscopy (TEM) confirmed the presence of octahedral and rod-shaped titania particles and sheet copper(II) oxide particles; moreover, HRTEM analysis indicated the presence of...
-
Między klasyką a awangardą. Szpital Morski na Oksywiu projektu Mariana Lalewicza
PublicationCelem artykułu jest ukazanie architektonicznego dziedzictwa Szpitala Morskiego w Gdyni, będącego inwestycją wojskową z początku lat 30. XX weku, a powstałego w biurze ważnego i cenionego architekta – Mariana Lalewicza. Ten zasłużony projektant, reprezentant klasycyzmu akademickiego, miał w swym dorobku m.in. kilka gdyńskich obiektów istotnych dla Polskiej Marynarki Wojennej. W 1930 r. podjął się wyzwania szczególnego, jakim była...
-
Między prawdą, a mitem – o kontrowersjach co do istnienia prawa cywilnego w Chinach dynastycznych
Publication -
Międzynarodowa konferencja IATUL Seminar 2019 „Organizacyjne i prawne aspekty Otwartej Nauki” / International IATUL Seminar 2019 "Organizing the Open Science Framework – Strategies and Legal Aspects”
PublicationIATUL Seminar 2019 was held in Gdańsk/Sopot, Poland (December 10-11th, 2019). The theme of the Seminar was „Organizing the Open Science Framework – Strategies and Legal Aspects”. The event was co-organized by Gdańsk University of Technology Library and International Association of University Libraries (IATUL). IATUL Seminar 2019 event attracted delegates, including directors and senior managers of university and research libraries...
-
Międzynarodowa Konferencja Naukowa w Katowicach: “Przyszłość badań naukowych w świetle prawa autorskiego, kodeksów etycznych naukowców oraz kryteriów ocen jakości badań”
Publication -
Mikrofiltrowany koncentrat soku brzozowego jako innowacyjny, trwały środek spożywczy o wysokiej wartości odżywczej
PublicationIntroduction. The forest environment becomes an increasingly popular place of obtaining raw materials, and one of the most promising product is birch sap. The market for bottled birch sap in Poland is monotonous, relying exclusively on pasteurized, acidified and sweetened drinks. A chance to change this situation is to develop a birch sap concentrate obtained by reverse osmosis. It has a sweet taste desired by consumers and particularly...
-
Milky Sap of Greater Celandine (Chelidonium majus L.) and Anti-Viral Properties
PublicationThe milky juice of the greater celandine herb has been used in folk medicine and in homeopathy for treatment of viral warts for years. However, classical medicine fails to use properties of celandine herbs in treatment of diseases induced by papilloma viruses. Nevertheless, dermatological outpatient clinics are regularly visited by patients reporting efficacy of milky sap isolated from celandine herb in treatment of their own...
-
Mineral Composition and Antioxidant Potential of Coffee Beverages Depending on the Brewing Method
Publication -
Miniature reconfigurable antenna
PublicationThis work concerns the design of a miniature, low-profile reconfigurable antenna based on Huygens metamaterial sources for frequency f0 = 2.45 GHz. Two planar Huygens sources were designed consisting of near-field resonators. Sources are excited from a specially designed reconfigurable control system. Thanks to the two PIN diodes, the system can realize two cardioid radiation characteristics with...
-
Miniaturization of ESPAR Antenna Using Low-Cost 3D Printing Process
PublicationIn this paper, the miniaturized electronically steerable parasitic array radiator (ESPAR) antenna is presented. The size reduction was obtained by embedding its active and passive elements in polylactic acid (PLA) plastic material commonly used in low-cost 3D printing. The influence of 3D printing process imperfections on the ESPAR antenna design is investigated and a simple yet effective method to...
-
Miniaturization of ESPAR Antenna Using Low-Cost 3D Printing Process
PublicationIn this paper, the miniaturized electronically steerable parasitic array radiator (ESPAR) antenna is presented. The size reduction was obtained by embedding its active and passive elements in polylactic acid (PLA) plastic material commonly used in low-cost 3D printing. The influence of 3D printing process imperfections on the ESPAR antenna design is investigated and a simple yet effective method to compensate them has been proposed....
-
Miniaturized methods of sample preparation
Publication -
Minimalizacja błędu estymaty położenia obiektu przez redukcję błędów radiowych pomiarów odległości
PublicationUtrzymująca się popularność modułu radiowego DWM1000 firmy DecaWave do zastosowań lokalizacyjnych przyczyniła się do przeprowadzenia analizy wpływu błędów radiowych pomiarów odległości na dokładność estymaty położenia lokalizowanego obiektu. W badaniach skupiono się na analizie błędów radiowych pomiarów odległości dla węzłów oddalonych od siebie w zakresie od kilkudziesięciu centymetrów do dziesięciu metrów. Ze względu na błąd...
-
Minimising the Churn Out of the Service by Using a Fairness Mechanism
PublicationThe paper proposes an algorithm of bandwidth distribution, ensuring fairness to end-users in computer networks. The proposed algorithm divides users into satisfied and unsatisfied users. It provides fairness in terms of quality of experience (QoE) for satisfied users and quality of service (QoS) for unsatisfied users. In this paper, we present detailed comparisons relevant to service providers to show the advantages of the proposed...
-
Minute and diverse in fossil sticky stuff: Tanytarsini (Diptera: Chironomidae) from early Eocene Indian Cambay amber
PublicationWe here present a pioneering systematic review of fossil dipterans of the tribe Tanytarsini (family Chironomidae) discovered in Indian amber from Cambay. The specimens examined belong to five species: Gujaratomyia miripes, Stempellina stebneri sp. nov., Stempellinella pollex sp. nov., Tanytarsus forfex sp. nov. and Tanytarsus ramus sp. nov., which are described. All species belong to the oldest known Tanytarsini and come from the...
-
„Mit założycielski” polityki zagranicznej Rosji
Publication -
Mitigation of Fake Data Content Poisoning Attacks in NDN via Blockchain
PublicationAbstract—Information-centric networks struggle with content poisoning attacks (CPAs), especially their stronger form called Fake Data CPA, in which an intruder publisher uploads content signed with stolen credentials. Following an existing graphinfection based approach leveraging the constrained time when stolen credentials are useful, we design a blockchain-based mitigation scheme for Named Data Networking architectures. We postulate...
-
Mitigation of Membrane Wetting by Applying a Low Temperature Membrane Distillation
Publication -
Mitigation of the Flow Maldistribution in Minichannel and Minigap Heat Exchangers by Introducing Threshold in the Manifolds
PublicationIn the present paper, a detailed numerical investigation has been carried out to analyze the flow maldistribution in 50 parallel rectangular cross-section (1 mm depth and 1 mm width) minichannels and minigap section (1 mm depth and 99 mm width) with rectangular/trapezoidal manifolds in Z-type flow configuration. The author carried out numerical investigation with various mass flowrates, namely 0.05 kg/s, 0.1 kg/s and 0.2 kg/s which...
-
Mitochondrial D-loop informative SNPs in identification of dog’s breed
Publication -
Mixed Convection in Lid-Driven “T” Shallow Cavity Heated From Bottom and Filled by Two Immiscible Fluids of Air and Al2O3-Water Nanofluid
Publication -
Mixed mechanical-metrological approach to quantify the fractographic damage in mechanical components subjected to cyclic loading
Publication -
Mleko i produkty mleczne jako potencjalne źródło enterotoksyn gronkowcowych
Publication -
MnxCo3-xO4 spinel oxides as efficient oxygen evolution reaction catalysts in alkaline media
PublicationThe design of efficient electrocatalysts for oxygen evolution reaction (OER) is an essential task in developing sustainable water splitting technology for the production of hydrogen. In this work, manganese cobalt spinel oxides with a general formula of MnxCo3-xO4 (x=0, 0.5, 1, 1.5, 2) were synthesised via a soft chemistry method. Non-equilibrium mixed powder compositions were produced, resulting in high electrocatalytic activity....
-
Mobile chromatographs and spectrometers for the analysis of chemical warfare agents
PublicationThis article describes the technological state of readiness regarding mobile chromatographs and spectrometers and their appiicability for the analysis of chemical warfare agents (CWAs), degradation products, simulants, and precursors.
-
Mobile Cloud computing architecture for massively parallelizablegeometric computation
PublicationCloud Computing is one of the most disruptive technologies of this century. This technology has been widely adopted in many areas of the society. In the field of manufacturing industry, it can be used to provide advantages in the execution of the complex geometric computation algorithms involved on CAD/CAM processes. The idea proposed in this research consists in outsourcing part of the load to be com- puted in the client machines...
-
Mobile Security: Threats and Best Practices
PublicationCommunicating mobile security threats and best practices has become a central objective due to the ongoing discovery of new vulnerabilities of mobile devices. To cope with this overarching issue, the goal of this paper is to identify and analyze existing threats and best practices in the domain of mobile security. To this extent, we conducted a literature review based on a set of keywords. The obtained results concern recognizable...
-
Model Based Monitoring of Dynamic Loads and Remaining Useful Life Prediction in Rolling Mills and Heavy Machinery
Publication -
Model funkcjonalny wpływu czynników na jakość produktu w branży piekarniczej
PublicationW artykule zostały przedstawione czynniki, które mają wpływ na jakość produktu w branży piekarniczej. Tym produktem jest pieczywo, a w szczególności chleb, który stanowi od 80% do 90% jego ogólnej produkcji. Autor wyodrębnił czynniki wpływające na jakość produktu i usystematyzował je, a następnie opisał. Podzielone one zostały na 3 grupy funkcjonujące w procesie produkcyjnym, a następnie na podgrupy. Podstawowe grupy czynników,...
-
Model of aeration system at biological wastewater treatment plant for control design purposes
PublicationThe wastewater treatment plant (WWTP) is a dynamic, very complex system, in which the most important control parameter is the dissolved oxygen (DO) con-centration. The air is supplied to biological WWTP by the aeration system. Aera-tion is an important and expensive activity in WWTP. The aeration of sewage ful-fils a twofold role. Firstly, oxygen is provided as the main component for biolog-ical processes. Secondly, it supports...
-
Model of Nutrient and Pesticide Outflow with Surface Water to Puck Bay (Southern Baltic Sea)
PublicationCoastal basins are particularly exposed to the adverse impact of anthropogenic stress. In many places, despite only the seasonal increase in the number of residents, progressive urbanization and associated changes in the catchment characteristics are noticeable. Puck Bay is part of the Gulf of Gdansk and belongs to the Baltic Sea. Although the area of Puck Bay is covered by the Natura 2000 Network, this has not saved it from eutrophication...
-
Model systemu zarządzania usługami według metodologii design-thinking
PublicationW literaturze przedmiotu brakuje jednoznacznych wskazań odnośnie decyzji o wyborze najbardziej odpowiedniego modelu projektowania usług, szczególnie w kontekście różnych uwarunkowań dla poszczególnych sektorów rynku. Opracowany algorytm umożliwia samodzielne rozwiązanie problemu doboru modelu wewnątrz organizacji, bez konieczności zatrudniania zewnętrznego specjalisty. Algorytm skierowany jest do organizacji w fazie przygotowawczej...
-
Model zaangażowania w relacji usługodawca-klient
PublicationW niniejszej monografii przedstawiono rozwiązania pozwalające lepiej zrozumieć złożoność relacji występujących pomiędzy usługodawcami a klientami oraz metody, które pozwalają tę wiedzę wykorzystać w doskonaleniu procesów organizacji usługowych. Monografia podejmuje problem kształtowania zaangażowania na styku usługodawca–klient jako wstępnego i koniecznego warunku rozwijania relacji w usługach. Opierając się na klasycznej drabinie...
-
Modele ruchu w nowoczesnym zarządzaniu transportem drogowym
PublicationWdrożenie i rozwijanie wielopoziomowego modelu podróży i sieci transportowej (MST), w ramach Systemu Planowania Ruchu (SPR), usprawniającego zarządzanie transportem w systemach transportowych z wykorzystaniem usług oferowanych przez Inteligentne Systemy Transportu, może stanowić wsparcie naukowe dla krajowych, regionalnych lub lokalnych administracyjnych jednostek planistycznych i operacyjnych w usprawnieniu systemowego zarządzania...
-
Modele rurociągowych procesów przepływowych
PublicationW rozdziale analizowane jest zagadnienie modelowania oraz parametryzacji procesu przepływu w rurociągach przemysłowych. W pierwszej kolejności przedstawia się bazowy model dyskretny, do którego odnoszone są pozostałe syntezowane rozwiązania. Następnie proponuje się metodę aproksymacji diagonalnej (AMDA), w której stosuje się przybliżenia trójdiagonalnych podmacierzy macierzy rekombinacji za pomocą ich diagonalnych odpowiedników...
-
Modeling and optimizing the removal of cadmium by Sinapis alba L. from contaminated soil via Response Surface Methodology and Artificial Neural Networks during assisted phytoremediation with sewage sludge
Publication -
Modeling of a Combined Cycle Gas Turbine Integrated with an Adsorption Chiller
Publication -
Modeling of a Quasi-Resonant DC Link Inverter Dedicated to Common-Mode Voltage and Ground Current Reduction
PublicationIn this paper, the modeling methodology of the AC drive system with a Parallel Quasi-Resonant DC Link Inverter (PQRDCLI) is described. A presented modeling approach is an attractive tool used for the effective evaluation of a common-mode (CM) voltage and grounds current reduction methods. Designed models of inverter, induction machine (IM), and cable are simple, thus the methods for parameter extraction are not complicated. Verification...
-
Modeling of Axial Flux Permanent Magnet Generators
Publication -
Modeling of wood frame structures with different insulation materials under damaging dynamic loading
PublicationWood frame buildings are very popular in regions that are exposed to different dynamic excitations, such as damaging earthquakes. Their seismic resistance is really important in order to prevent structural damages and human losses. This paper presents the results of advanced numerical investigation carried out using the FEM. Based on the models of wall panels, the numerical model of real structure of the wood frame building has...
-
Modeling process of planning finished product sales volumes at industrial enterprises in modern economic conditions
PublicationThis article presents improving the existing system of planning finished products sales volumes. The influencing factors of the sales volumes in modern economic conditions have been determined: falling world oil prices, the reduction of pipe consumption in the domestic market, the global pandemic. The algorithm of planning finished products sales volumes has been constructed. Calculations based on the Holt forecasting method has...
-
Modeling, simulation, and validation of a TB41 crash test of the H2/W5/B concrete vehicle restraint system
PublicationThe paper addresses numerical simulations of a concrete vehicle restraint system. The model is described in detail. The advanced material law of the continuous surface cap model was used to analyze the damage locations in concrete barrier segments. The results were validated against the TB41 full-scale crash test. The test was conducted in compliance with European standard EN 1317, and the validation was performed in accordance...
-
Modelling and analysis of medium frequency transformers for power converters
PublicationThe evolutions in power systems and electric vehicles, related to the economic opportunities and the environmental issues, bring the need of high power galvanically isolated DC-DC converter. The medium frequency transformer (MFT) is one of its key components, enabled by the increasing switching frequency of modern power semiconductors like silicon carbide transistors or diodes. The increased operating frequency offers small...
-
Modelling and parameter identification of steel–concrete composite beams in 3D rigid finite element method
Publication -
Modelling assisted phytoremediation of soils contaminated with heavy metals – Main opportunities, limitations, decision making and future prospects
Publication -
Modelling of a 25 kV-50 Hz Railway Infrastructure for Harmonic Analysis
Publication -
Modelling of Abdominal Wall Under Uncertainty of Material Properties
PublicationThe paper concerns abdominal wall modelling. The accurate prediction and simulation of abdominal wall mechanics are important in the context of optimization of ventral hernia repair. The shell Finite Element model is considered, as the one which can be used in patient-specific approach due to relatively easy geometry generation. However, there are uncertainties in this issue, e.g. related to mechanical properties since the properties...
-
Modelling of dielectric properties of BiNbO4-based microwave ceramics
PublicationIn the present paper results of the studies devoted to computer simulations of dielectric response of electroceramics in a frequency domain as well as analysis of the experimental data are given. As an object of investigations BiNbO4-based microwave ceramics was taken. Simulations of the hypothetical impedance response of the ceramic system were performed under assumption of the brick-layer model. A strategy for analysis and modelling...
-
Modelling of heat and mass transfer through wooden buildings
PublicationThe aim of this review paper is to examine the most recent available studies dealing with theoretical, numerical and experimental aspects related to modelling of heat and mass transfer through wooden buildings. The main thermophysical, mechanical and hygrometric properties of wood are firstly discussed. Then, the basic governing equations of heat and mass transfer phenomena are presented. A detailed description of the physical...
-
Modelling of heat transfer in supercritical pressure recuperators
PublicationIn the paper presented is analysis of convective flow heat transfer at supercritical pressure in channels of heat exchanger working in the thermodynamic cycle. The modelling is based on the division of the flow into three regions, namely the heavy fluid, a two phase flow consisting of the heavy and light fluids and finally the light fluid flow. Modelling is concentrated on the region of simultaneous flow of two fluids divided into...
-
Modelling study of flow boiling heat transfer of perspective fluids for refrigeration technology
PublicationThere is a gap of knowledge on flow boiling at high saturation temperatures and higher values of reduced pressure. Thus far, the in-house developed semi-empirical model for flow boiling and flow condensation showed a satisfactory accuracy for calculations for various refrigeration fluids for a wide scope of reduced pressures. This study presents results of calculations of heat transfer coefficient of perspective refrigeration fluids,...
-
Modelling the Safety Levels of ICT Equipment Exposed to Strong Electromagnetic Pulses
Publication -
Modelowanie bezpiecznika rozłącznikowego w układach formowania impulsów wielkiej mocy
PublicationProblem modelowania bezpieczników o dużej dynamice wyłączania prądu jest zagadnieniem szeroko opisywanym w literaturze. Układy takie mogą być wykorzystane w szczególności do formowania impulsów wysokiego napięcia o wartościach rzędu setek kV, charakteryzujących się czasem trwania rzędu ułamka μs. W niniejszej pracy przedstawiono empiryczny model bezpiecznika wielotopikowego, rozszerzony w oparciu o wyniki badań eksperymentalnych.
-
Modelowanie losowych imperfekcji geometrycznych przestrzennych konstrukcji metalowych
PublicationImperfekcje geometryczne zbiorników, silosów i powłok siatkowych mogą znaczą-co wpłynąć na ich nośność, a więc powinny być one uwzględniane w obliczeniach komputerowych i w procesie projektowania. Wykazano, że przy podstawowych obcią-żeniach, działających na tego typu konstrukcje, tj. podciśnieniu oraz naporu wiatru i śniegu (w przypadku powłok siatkowych), wykazują wyraźne różnice w porównaniu z analogicznymi wynikami dla tych...
-
Modelowanie matematyczne transportu lodu w rejonie projektowanego Stopnia Wodnego Siarzewo
PublicationPrzedstawiono wpływ planowanego stopnia Siarzewo na Wiśle na dynamikę lodu w obszarze powyżej i poniżej stopnia. Do tego celu zaimplementowano model matematyczny i przeprowadzono symulacje numeryczne dla różnych scenariuszy. Obliczenia służyły do wyznaczeniu trasy spływu lodu przez zbiornik i poniżej zbiornika oraz sił z jakimi lód będzie oddziaływał na brzegi i dno rzeki oraz projektowane na zbiorniku wyspy. Badaniami objęto odcinek...
-
Models of Brushless Synchronous Generator for Studying Autonomous Electrical Power System
PublicationThis is a PhD dissertation. The work presented in this monograph was carried out at the Department of Power Electronics and Electrical Machines, Faculty of Electrical and Control Engineering at the Gdansk University of Technology. Developed during the research models of brushless synchronous generator ware verified using FEM based simulations and measurements conducted on the prototype generator. The main focus of the research...
-
Models of using the Internet by young Poles and their social capital.
PublicationHighlights • Study examining Polish youth on internet usage styles. • Online communication is the most common form of spending time on the Internet. •...
-
Modern Assyrian/Syriac Diaspora in Sweden
Publication -
Modern Hybrid Excited Electric Machines
Publication -
Modernity and postmodernity in architectural education
PublicationThe purpose of this article is to present a philosophical education strategy for architecture and interior architecture faculties. The approach is the result of trial and error in lectures and debates with students of philosophical courses in these fields. The presented article is not a result of empirical research, but rather a report on the problems encountered and proposals for their solution. The experience gained from conducting...
-
Modernized cathodic protection system for legs of the production rig – Evaluation during ten years of service
PublicationThe modernization of cathodic protection system of the Baltic Beta platform legs is described. It was that the sacrificial anodes cone-shaped groups were to be placed on the seabed at a depth of 80 m. The measurements results of cathodic protection effectiveness during its ten-years operation are presented. The effectiveness was assessed based on the potential value along the entire length of the legs from the sea surface to the...
-
Modification of Ground Tire Rubber—Promising Approach for Development of Green Composites
PublicationGround tire rubber (GTR) was mechano-chemically modified using a road bitumen 100/150 and two types of organic peroxides: di-(2-tert-butyl-peroxyisopropyl)-benzene (BIB) and dicumyl peroxide (DCP). The impact of used additives on reactive sintering efficiency and physico-mechanical properties of modified GTR was investigated using oscillating disc rheometer measurements, followed by tensile tests and swelling behavior studies....
-
Modifications at the C(5) position of pyrimidine nucleosides
PublicationThis review summarizes the state of knowledge on the chemical methods of C(5)-modifications of uridine and cytidine derivatives and may serve as a useful tool for synthetic chemists to choose an appropriate reaction protocol. The synthesis of 5-substituted uracil derivatives is gaining an increasing interest because of their possible applications in medicine and pharmacy. Modifications at the C(5) position of pyrimidine nucleosides...
-
Modifications of Hydroxyapatite by Gallium and Silver Ions—Physicochemical Characterization, Cytotoxicity and Antibacterial Evaluation
Publication -
Modified Manganese Phosphate Conversion Coating on Low-Carbon Steel
PublicationConversion coatings are one of the primary types of galvanic coatings used to protect steel structures against corrosion. They are created through chemical reactions between the metal surface and the environment of the phosphating. This paper investigates the impact that the addition of new metal cations to the phosphating reaction environment has on the quality of the final coating. So far, standard phosphate coatings have contained...
-
Moduł platformy SyMEC odpowiedzialny za współpracę serwera MEC z sieciami komórkowymi i bezprzewodowymi sieciami dostępowymi WLAN
PublicationZaprezentowano moduł współpracy z sieciami dostępowymi, będący istotnym elementem serwera MEC (Multi-access Edge Computing), budowanego w ramach projektu SyMEC i umożliwiającego uruchamianie elementów aplikacyjnych na brzegu sieci. Przedstawiono różnice w wymaganiach dotyczących sposobu realizacji tego komponentu w przypadku sieci dostępowych standaryzowanych przez 3GPP oraz sieci WLAN. Zaproponowana została architektura umożliwiająca...
-
Modus operandi of Qatar Resistance Policy against “Anti-Terror Quartet”
Publication -
Molecular basis for the bifunctional Uba4–Urm1 sulfur‐relay system in tRNA thiolation and ubiquitin‐like conjugation
Publication -
Molecular Characterization of a Novel Lytic Enzyme LysC from Clostridium intestinale URNW and Its Antibacterial Activity Mediated by Positively Charged N-Terminal Extension
Publication -
Molecular Determinants of Proton Transfer in ATP Synthase FO Complex
Publication -
Molecular Dynamics simulations of thermal conductivity of penta-graphene
PublicationThe thermal conductivity of penta-graphene (PG), a new two dimensional carbon allotrope and its dependence on temperature, strain, and direction are studied in this paper. The thermal conductivity of PG is investigated using a non-equilibrium molecular dynamics simulation (NEMD) with the Two Region Method by applying the optimized Tersoff interatomic potential. Our study shows that the thermal conductivity of PG (determined for...
-
Molecular modeling study of tectoquinone and acteoside from Tectona grandis linn: a new SARS-CoV-2 main protease inhibitor against COVID-19
Publication -
Molecular Profiling for Predictors of Radiosensitivity in Patients with Breast or Head-and-Neck Cancer
Publication -
Molywood: streamlining the design and rendering of molecular movies
PublicationMotivation High-quality dynamic visuals are needed at all levels of science communication, from the conference hall to the classroom. As scientific journals embrace new article formats, many key concepts – particularly in structural biology – are also more easily conveyed as videos than still frames. Notwithstanding, the design and rendering of a complex molecular movie remain an arduous task. Here, we introduce Molywood, a robust...
-
Moments of Hermite-Gaussian functionals
PublicationMoments of finite products of Hermite-Gaussian functionals are expressed by covariances of Gaussian sequence.
-
Monetary Incentives Increase Metacognitive Confidence in Source Memory Performance in Patients With Schizophrenia
Publication -
Monetary values estimates of solvents emissions
PublicationThe impact values for environmental emissions of 52 solvents are estimated and expressed in monetary units. The impact values of solvents present in the air are calculated on the basis of 13 impact indicators and for solvents present in water on additional 2 impact indicators. These impact values are weighted with the results obtained with multi-compartment distribution model, allowing to calculate the fraction of solvent emitted...
-
Monitoring of Selected CBRN Threats in the Air in Industrial Areas with the Use of Unmanned Aerial Vehicles
Publication -
Monitoring the BTEX Volatiles during 3D Printing with Acrylonitrile Butadiene Styrene (ABS) Using Electronic Nose and Proton Transfer Reaction Mass Spectrometry
Publication -
Monitoring the BTEX Volatiles during 3D Printing with Acrylonitrile Butadiene Styrene (ABS) Using Electronic Nose and Proton Transfer Reaction Mass Spectrometry
PublicationWe describe a concept study in which the changes of concentration of benzene, toluene, ethylbenzene, and xylene (BTEX) compounds and styrene within a 3D printer enclosure during printing with different acrylonitrile butadiene styrene (ABS) filaments were monitored in real-time using a proton transfer reaction mass spectrometer and an electronic nose. The quantitative data on the concentration of the BTEX compounds, in particular...
-
Mono- and bimetallic (Pt/Cu) titanium(IV) oxide photocatalysts. Physicochemical and photocatalytic data of magnetic nanocomposites’ shell
PublicationSurface modification of titania with noble and semi-noble metals resulted in significant enhancement of photocatalytic activity. Presented data, showing the photocatalytic properties of TiO2-M (where M is Pt and/or Cu) photocatalysts were further used as Fe3O4@SiO2/TiO2-M magnetic nanocomposites shells in "Mono- and bimetallic (Pt/Cu) titanium(IV) oxide core-shell photocatalysts with Vis light activity and magnetic separability"...
-
Monolithically p-down nitride laser diodes and LEDs obtained by MBE using buried tunnel junction design
Publication -
Moralność jako erzac duchowości. Filozoficzne uwagi na temat współczesnej teologii
Publication -
Morze możliwości
PublicationZ Karolem Moszykiem, Kierownikiem ds. Rozwoju Operacyjnego/ Lean Six Sigma Black Belt, DCT Gdańsk SA i prelegentem pierwszego Gdańskiego Manager Clubu - o ciągłbym doskonaleniu w głębokowodnym terminalu kontenerowym - rozmawiał Łukasz Rogatka
-
Motywacja zawodowa funkcjonariuszy rozpoczynających pracę w więziennictwie
Publication -
Mountain pass solutions to Euler-Lagrange equations with general anisotropic operator
PublicationUsing the Mountain Pass Theorem we show that the problem \begin{equation*} \begin{cases} \frac{d}{dt}\Lcal_v(t,u(t),\dot u(t))=\Lcal_x(t,u(t),\dot u(t))\quad \text{ for a.e. }t\in[a,b]\\ u(a)=u(b)=0 \end{cases} \end{equation*} has a solution in anisotropic Orlicz-Sobolev space. We consider Lagrangian $\Lcal=F(t,x,v)+V(t,x)+\langle f(t), x\rangle$ with growth conditions determined by anisotropic G-function and some geometric conditions...
-
Możliwości wykorzystania spektroskopii fotoelektronów w analizie jakości środowiska wodnego
PublicationSpektroskopia fotoelektronów w zakresie promieniowania X, (XPS, z ang. X-ray photoelectron spectroscopy) jest nowoczesną metodą analityczną wykorzystywaną w wielu wiodących ośrodkach naukowych na świecie. Jest ona stale ulepszana, jak też poznawane są nowe obszary jej zastosowania. W niniejszym artykule przedstawione zostały możliwości wykorzystania metody XPS w ramach obszarów badawczych powiązanych z gospodarką wodną, takich...
-
MP3vec: A Reusable Machine-Constructed Feature Representation for Protein Sequences
Publication—Machine Learning (ML) methods have been used with varying degrees of success on protein prediction tasks, with two inherent limitations. First, prediction performance often depends upon the features extracted from the proteins. Second, experimental data may be insufficient to construct reliable ML models. Here we introduce MP3vec, a transferable representation for protein sequences that is designed to be used specifically for sequence-to-sequence...
-
MPD growth of single crystals of Ce3+ doped Gd3−xLuxAl5−yGayO12 mixed garnets and their luminescent, scintillation and photoconversion properties
Publication -
mRNA adenosine methylase (MTA) deposits m 6 A on pri-miRNAs to modulate miRNA biogenesis in Arabidopsis thaliana
Publication -
Mucoadhesive Chitosan Delivery System with Chelidonii Herba Lyophilized Extract as a Promising Strategy for Vaginitis Treatment
Publication -
Multi-agent graph searching and exploration algorithms
PublicationA team of mobile entities, which we refer to as agents or searchers interchangeably, starting from homebases needs to complete a given task in a graph.The goal is to build a strategy, which allows agents to accomplish their task. We analyze strategies for their effectiveness (e.g., the number of used agents, the total number of performed moves by the agents or the completion time).Currently, the fields of on-line (i.e., agents...
-
Multiaxial fatigue life assessment in notched components based on the effective strain energy density
Publication -
Multicast Traffic Throughput Maximization through Dynamic Modulation and Coding Scheme Assignment in Wireless Sensor Networks
Publication